I need help starting the server

Hello!
I am trying to do the HelloWorld rmi-example and I can't get the server started. Can anyone tell me if there's something wrong what I am trying to do.
At command prompt I type:
java -Djava.rmi.server.codebase="file:///C:/temp/Jaana/aa/examples_hello/examples/hello/" -Djava.security.policy=c:/temp/Jaana/aa/examples_hello/policy/ examples.hello.HelloImpl
I get "Exception in thread "main" java.lang.NoClassDefFoundError: examples/hello/HelloImpl
My .java files are in the directory C:/temp/Jaana/aa/examples_hello
and all my .class files are in the directory C:/temp/Jaana/aa/examples_hello/examples/hello
java.policy -file is in the directory C:/temp/Jaana/aa/examples_hello/policy
Hopefully someone can help me, Jaana

Hi!
I am trying to use my computer as a server. So the server and the application is physically on same computer.
Jaana
(Did I answer your question...)

Similar Messages

  • Need help starting the servlets,

    Hello,
    I have a program an application on my computer that I have written almost two years ago. In few words, it is a web based meeting scheduling tool. I used Tomcat Server to run this application and how it works, I start the application by typing http://localhost/Login.html, it gives me a page where I can log in or click on the registration link that woul take me to registration page. Here I type in my name, last namer, username and password and a servlet is supposed to save these data to a database that I have created before. Now, this is the exception that I keep getting:
    java.lang.NullPointerException
         at RegistrationServlet.doPost(RegistrationServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
         at java.lang.Thread.run(Thread.java:536)
    By the way, the line 29 is following:
    stmt=dbConn.createStatement();
    I want to mention that everything worked before an nothing has been changed but I just haven't started this app for almost 2 years and I know there is something that I need to do but I spent 2 hours trying to figure out an couldn do it. I started Tomcat server, I have all the classes in 'classes' folder of tomcat package, I have database set up. Now what comes to my mind is a problem somewhere in Admistrator tools and ODBC things. It's an Acess database. Anybody has an idea? Thanks a lot, D.

    I solved it. There was a problem w/ ODBC for MS Access, some driver was missing an it works now. Well, thanks anyways,D.

  • Finished Installation..ERROR in starting the SERVER PLZZ HELP

    Hi,
    I could complete the installation of SAP WAS from the cd with host n keller successfully.
    But now when i make a set up and try to logon with the SAP GUI , It gives an error saying the host couldnt be find and in the meanwhile on ABAP ENGINE STARTUP SCREEN it starts the server and then immediately shuts down showing : Work process xx died..and ICM shut down successful.
    Plzz help me as to if any settings are causing this or wat should i do to splve this.
    Thanks,
    Shilpi

    Hi,
    Did you configure loopback adapter and assigned a ip address to it? If it is done, then try to increase virtual memory.
    Sabita

  • About load.mlet... Pb with starting the server.. help plz

    Hi all...
    I have a shell that start a server for my job. When i start my server with shell
    command, i have some errors in the log and my server don't start.
    This is very important cause it's for my job.
    <Critical> <WebLogicServer> <000364> <Server failed during initialization. Exception:weblogic.management.configuration.Configur
    ationException: - with nested exception:
    [java.io.FileNotFoundException: ./WLSMRMCLAVT1/load.mlet (No such file or directory)]
    I just want to know why i have this. The file can't be found but what's the problem.
    Path config ?
    I have search but i'm not very good in weblogic config and debugging.
    Thx for ur help... Any infos are welcome...
    Florian

    Do you have write permissions on your file system? I mean, wls writes
    out this file while booting the server, I am afriad the user starting
    the server dont have proper file permissions.
    Try starting the server with
    -Dweblogic.Debug=weblogic.initCommo, this will spew some debug output
    that might help resolve the issue.
    thanks,
    -satya
    Florian Proch wrote:
    Hi all...
    I have a shell that start a server for my job. When i start my server with shell
    command, i have some errors in the log and my server don't start.
    This is very important cause it's for my job.
    <Critical> <WebLogicServer> <000364> <Server failed during initialization. Exception:weblogic.management.configuration.Configur
    ationException: - with nested exception:
    [java.io.FileNotFoundException: ./WLSMRMCLAVT1/load.mlet (No such file or directory)]
    I just want to know why i have this. The file can't be found but what's the problem.
    Path config ?
    I have search but i'm not very good in weblogic config and debugging.
    Thx for ur help... Any infos are welcome...
    Florian

  • Need help regarding the location of Exchange 2013 Logs for parsing

    Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
    exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
    I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
    Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
    Exchange store changes)
    Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
    Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
    I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
    Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
    Thanks,
    Matt

    Audit Logs (Mailbox logons, Mailbox permission
    changes, Mailbox property changes, Exchange
    store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
    http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
    enable
    it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
    Mail Report Logs (Mailbox size and growth, Mailbox
    storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
    Exchange Traffic Reports (Details on size and
    amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

  • Need help startng websphere server in eclipse for debugging porpose

    I am using Eclipse Sdk Version: 3.1.2
    IBM websphere 6.0
    JDK 1.4
    I set debug value to "true" in my application.xml
    I have a .ear file of my application deployed on the websphere appserver. Currently I can test my application in nobebug mode.
    values of environment variables are -
    JAVA_HOME - C:\DEV\IBMJDK142; C:\Program Files\Java\jre1.6.0_03
    PATH - C:\DEV\IBMJDK142\bin; C:\Program Files\IBM\WebSphere MQ\Java\lib;C:\DEV\IBMJDK142\bin;%SystemRoot%\system32;%SystemRoot%;
    I want to test the application in debug mode.
    I am using default server on websphere, which is server1.
    In Admin-console of webshere I went to
    server-->Application server-->choose server1-->Debugging Service ---->checked the checkbox "Enable service at server startup"
    Here value of my JVM debug port is 7777.
    next In Eclipse env I chose Run---->Debug....--->Remote Java Application ----> created a new application with the name of my application and set the connection properties to -
    Host - localhost
    port-7777
    Eclipse----> Windows----->Preferences---->Server----->Installed Runtime---->Add---->selected values such as -
    JRE - default JRE(JDK 1.4)
    IBM Websphere Installation Directory - C:/DEV/WebSphere/AppServer
    saved it.
    Now in debug perspective, I created a new server with selection/values such as -
    IBM--->IBM Websphere v6---->
    port - 9081
    server profile directory - C:/DEV/WebSphere/AppServer/profiles/default
    cell - GCWSNTRANode01Cell
    node - GCWSNTRANode01
    server - server1
    Next---->Added the project to configured project ----->FINISH
    Closed Eclipse to save env settings.
    Started the default server (server1)
    opened eclipse - desired project--->debug perspective ---->choose server--->Right Click----Start/Debug
    mesg "Starting ServerI BM Websphere 6 - IBM Websphere 6 failed to start"
    can some one please tell me what I am missing here.

    Need help startng websphere server in eclipse for debugging porpose
    can some one please tell me what I am missing here. Well for one, you're trying to debug a dolphin
    Edited by: redfalconf35 on Jun 19, 2008 4:50 PM

  • Getting error while starting the server.

    I am getting the following error while starting the server. Please help
    trc file: "C:\SAP\JP1\JC00\work\dev_jstart", trc level: 1, release: "710"
    sysno      00
    sid        JP1
    systemid   560 (PC with Windows NT)
    relno      7100
    patchlevel 0
    patchno    0
    intno      20063500
    make       multithreaded, Unicode, optimized
    profile    C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
    pid        2240
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, JM
    arguments :
      arg[ 0] : C:\SAP\JP1\SYS\exe\run\jstart.exe
      arg[ 1] : pf=C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
    F 
    F [Thr 3540] Tue Sep 04 20:55:33 2007
    F  [Thr 3540] SfCJdkConfig::get: JDK home directory is set by profile
    F  [Thr 3540]      Java home: C:\SAP\JP1\SYS\exe\run\sapjvm_5
    F  [Thr 3540] SfCJdkConfig::get: Java VM type is set by profile
    F  [Thr 3540]      Java VM type: server
    F  ********************************************************************************
    F  Java SDK properties (C:\SAP\JP1\JC00\work\jstart.jdk)
    F    root directory    : C:\SAP\JP1\SYS\exe\run\sapjvm_5
    F    vendor            : SAP AG
    F    version           : 1.5.0_07-b00
    F    cpu               : x86
    F    java vm type      : server
    F    jvm library name  : jvm.dll
    F    library path      : C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin\server;C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin
    F    executable path   : C:\SAP\JP1\SYS\exe\run\sapjvm_5\bin
    F  ********************************************************************************
    I  [Thr 3540] MtxInit: 30002 0 2
    F  [Thr 3540] JsfCreateShm: ShmCreate(79, 4096, ATTACH) failed (rc = 3 SHM segment doesn't exist)...
    F  [Thr 3540] SfCInstanceManager::newState: starting run level 1.
    F  [Thr 3540] *** ERROR => SfICreateFiElem: FiInit(JSF-FI-BRSESS, 1, 32) failed (rc = 6 invalid argument) [jsfxxshm.c   1909]
    F  [Thr 3540] *** ERROR => SfEInternalError: SfCInstanceManager::createDynShm: JsfCreateDynShm failed (rc = 1 general error)  [sfxxinst.hpp 349]
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Callstack without Exception:
    App       : jstart.exe (pid=2240)
    When      : 9/4/2007 20:55:34.296
    Threads   : 2
    Computer Name       : EMPMXMOBILE
    User Name           : SYSTEM
    Number of Processors: 2
    Processor Type: x86 Family 6 Model 15 Stepping 6
    Windows Version     : 5.1 Current Build: 2600
    Stack Dump for Thread Id dd4
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0006f784 00000000 7c8025cb 00000000 00000604 00000000 ntdll!KiFastSystemCallRet
    0006f7fc 00000000 004385ac 00000000 00000604 00000000 kernel32!WaitForSingleObject
    0006f820 00000000 0044aeee 00000000 0044af27 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
    0006fa40 00000000 7c9106eb 00000000 78134d85 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
    005b36b8 00000000 00000000 00000000 00000029 00000000 ntdll!RtlAllocateHeap
    Stack Dump for Thread Id dd8
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0172feac 00000000 7c8314a6 00000000 00000674 00000000 ntdll!KiFastSystemCallRet
    0172ff74 00000000 781329b9 00000000 00000000 00000000 jstart!FcaConnection_fcaCloseOutput
    0172ffac 00000000 78132a45 00000000 7c910738 00000000 MSVCR80!endthreadex
    0172ffec 00000000 00000000 00000000 781329df 00000000 MSVCR80!endthreadex
    F 
    F [Thr 3540] Tue Sep 04 20:55:34 2007
    F  [Thr 3540] SfCOptions::doExit: goodbye... (exitcode 1, retcode 1)

    Hi Viji,
                It seem's some memory(RAM) problem is strucking, can you try to shut down the OS and try to start the server?
    Regards,
    Hari.

  • Need help accessing the router web page.  I have been tol...

    Need help accessing the router web page.  I have been told my router is acting like a switch and the IP address is not in the proper range.  I have tried reseting the router (hold for 30 sec and unplug for 5 mins).  Didn't work.
    thanks

    What router are you using?  Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS  (not the WRT54GS).
    You need to try again to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.
    Message Edited by toomanydonuts on 01-21-2008 04:40 AM

  • Reloading JavaBeans in a JSP without re-starting the server

     

              The JSP will get recompiled but the bean is already sucked in by the server. Even if you break the session by doing reqest.getSession.invalidate() at the end of your JSP - it still persists. Even try removing your bean class and you will still see that the page is working. That proves it doesn't use .class anymore. However when you touch your .jsp at this time and try to re-display it in the browser you will get compilation error because .class cannot be imported. When you put a new class and repeat it, it compiles against that new class but still executes with the old one. Until you restart the WebLogic server...
              "Carl Ansley" <[email protected]> wrote:
              >
              >I've found that you need to "touch" the JSP that references the javabean,
              >i.e. to force the server to recompile. Plus you'll need to create a new
              >session if the bean has session scope.
              >
              >"Eli Tucker" <[email protected]> wrote in message
              >news:8hom7d$puk$[email protected]..
              >> Hello.
              >>
              >> I have a JSP page that uses a simple JavaBean (not an EJB). If I modify
              >the
              >> bean, the server appears to use the old version of it. The only way I've
              >> found to force the server to use the latest version is to re-start the
              >> server.
              >>
              >> Is there a way to use the latest class without re-starting the server?
              >I'm
              >> using WebLogic Server 5.1.0 on an NT system.
              >>
              >> Thanks,
              >> Eli
              >
              >
              >
              

  • Dynamically load the content without re-starting the server

    Let me explain the scenario.........
    I have a JSP in which I call a method written in a different class( java file).
    Now, when I change the content of the method in the class and compile it, how can I get the updated stuff in the JSP without re-starting the server.
    Even though I have to re-deploy the changed class, I need to re-start the server to get the updates effective.
    The env set up is on Tomcat
    fun_one

    FUN_ONE, I am using Tomcat 5.0 (though not 5.5), and have a Test application that I do not use WARs to deply. The Context is set with reloadable="true".
    I have this simple bean:
    package jsp.beans;
    public class ItemBean implements java.io.Serializable
         public String getjunk() { return "Hello"; }
    } And this JSP
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <html>
      <head>
      </head>
      <body>
        <!-- Display the session ID for this user -->
        <p><c:out value="${pageContext.session.id}"/></p>
        <!-- Get the junk string from the ItemBean -->
        <p><jsp:useBean id="it" class="jsp.beans.ItemBean"/>
        <c:out value="${it.junk}"/></p>
      </body>
    </html> I run the JSP, then change the text returned by the bean, recompile it, then reload the JSP (force reload). The session id remains the same, and the text changes. Does this work on your system? (note, you do have to restart your server once after you set the Context to be reloadable="true")

  • Starting the server in Japanese mode after deployment in english mode.

    Hi,
    I have a problem
    We are developing some system for Japanese clients.
    Now problem is that we need to deploy all on their server which shows every hting
    in Japanese. Its going to be really very difficult for us.
    Is there any key or property in weblogic server by changing that we can change
    the language (english-->japanese)
    Actually what I wanted was first to run the server in English mode. deploy each
    and every thing sucessfuly.
    Then stop the server.
    Change that flag or whatever to use japanese character set.
    Start the server again so that it run in japanese language and having every thing
    already deployed.
    Is it possible approach?
    Any other suggestions are also most welcome.
    Thanks and Regards
    Pavitra

    Hi,
    You would have to use the below command to give the root directory to start the server in MSI mode
    -Dweblogic.RootDirectory=path
    Example:
    java -Dweblogic.RootDirectory=c:\MyServerRootDirectory weblogic.ServerTo get more information on this you can check the below link
    Topic: Starting a Managed Server in MSI Mode
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1058998
    Regards,
    Ravish Mody

  • Unable to start the server Instance

    Hello!!
    I am using the JDeveloper(11g) IDE first time.I am reading the help provided with the IDE.Uptill now I know how to create an application.When I run the jsp file for first 2-3 times it runs well, but after that the error comes like "Failed to start the server instance" and due to this I unable to proceed my work.
    Please tell me the exact solution to this error.

    When I run a JSPX file,following error comes in the log file:
    http://Running application Sample1 on Server Instance DefaultServer...
    Uploading credentials.
    ---- Deployment started. ---- Feb 21, 2009 4:07:56 AM
    Target platform is (Weblogic 10.3).
    Running dependency analysis...
    2009-02-21 04:07:57.128: Writing WAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-ViewController-webapp
    2009-02-21 04:07:57.394: Wrote WAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-ViewController-webapp
    2009-02-21 04:07:57.41: Writing EJB JAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-Model-ejb
    2009-02-21 04:07:57.488: Wrote EJB JAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-Model-ejb
    2009-02-21 04:07:58.675: Writing EAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1
    2009-02-21 04:07:58.847: Wrote EAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1
    #### Deployment incomplete. #### Feb 21, 2009 4:08:01 AM
    oracle.jdeveloper.deploy.DeployException
    at oracle.jdevimpl.deploy.adrs.wls.Jsr88AdrsRemoteDeployer.initializeHelper(Jsr88AdrsRemoteDeployer.java:52)
    at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:139)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
    at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
    at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
    Caused by: oracle.rc.asadapter.connection.ConnectionException: J2EE Deployment SPI:260010Unable to connect to 't3s://127.0.0.1:7002' as user, 'weblogic'. Error received: null
    at oracle.rc.asadapter.weblogic.connection.Weblogic10Jsr88Provider.getPresentation(Weblogic10Jsr88Provider.java:100)
    at oracle.rc.asadapter.connection.AppServerConnectionImpl.getPresentation(AppServerConnectionImpl.java:65)
    at oracle.jdevimpl.deploy.adrs.wls.Jsr88AdrsRemoteDeployer.initializeHelper(Jsr88AdrsRemoteDeployer.java:43)
    ... 11 more
    Caused by: javax.enterprise.deploy.spi.exceptions.DeploymentManagerCreationException: J2EE Deployment SPI:260010Unable to connect to 't3s://127.0.0.1:7002' as user, 'weblogic'. Error received: null
    at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:121)
    at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:84)
    at oracle.rc.asadapter.weblogic.connection.Weblogic10Jsr88Provider.getPresentation(Weblogic10Jsr88Provider.java:97)
    ... 13 more
    Caused by: weblogic.deploy.api.spi.exceptions.ServerConnectionException: J2EE Deployment SPI:260010Unable to connect to 't3s://127.0.0.1:7002' as user, 'weblogic'. Error received: null
    at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:251)
    at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServerForType(ServerConnectionImpl.java:191)
    at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.init(ServerConnectionImpl.java:147)
    at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.getNewConnection(WebLogicDeploymentManagerImpl.java:148)
    at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:118)
    ... 15 more
    Caused by: java.io.IOException
    at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:156)
    at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
    at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
    at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
    at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:240)
    ... 19 more
    Caused by: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://127.0.0.1:7002: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused: connect; No available router to destination]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:143)
    ... 23 more
    Caused by: java.net.ConnectException: t3s://127.0.0.1:7002: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused: connect; No available router to destination
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
    at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
    ... 31 more
    Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused: connect; No available router to destination
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
    at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
    at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:188)
    ... 36 more
    #### Cannot run application Sample1 due to error deploying to DefaultServer.
    Application Sample1 stopped and undeployed from Server Instance DefaultServer
    And on status bar the following message is shown:
    Failed to start application in server instance
    Please assist me with exact solution.
    Please help me I am doing my final year project using this tool.And I am geting furstrated due to this problem.
    Please reply quick!!
    Edited by: [email protected] on Feb 22, 2009 10:53 PM

  • Messages when starting the server

    Hi,
    I am using OC4J 10.1.3.
    When i start the server i am getting this message
    May 5, 2005 10:09:14 AM com.evermind.server.ejb.EJBPackageDeployment isIIOPConfigured
    INFO: Beans associated with application Twe will not be available via RMI/IIOP: GenerateIIOP system property=false, enableIIO
    P application setting=false, server.xml configured for IIOP=true
    May 5, 2005 10:09:14 AM com.evermind.server.ejb.EJBPackageDeployment isIIOPConfigured
    Any idea why this is coming. Does this mean that my beans are not deployed or I will not be able to access them.
    Thanks
    Kiran
    ----

    Kiran, there is no real problem here; the message, of type "INFO", is just to inform/warn you that your application is not properly configured for the purpose of accessing it through RMI/IIOP. Your beans are deployed and you will be able to access them as long as you are not using RMI/IIOP; otherwise, there should be other real error message printed out.
    Furthermore, this message is in the process of moving to some log file instead of popping up when the server is started. So, you probably won't notice them the next time you install a newer oc4j.
    Hope this helps.

  • Is there any need to start the Adobe Document Service in Functionality Overview in SAP NW 7.4.

    Hi All,
    Actually I am using SAP Net weaver 7.4 and Adobe document services 7.4 SP8.
    While doing the ADS configuration in SAP Netweaver Administrator is there any need to Start the Adobe Document Services in Functional Overview and the current  runtime status for ADS is Dependency has issues.
    In Configuration Tasks tab can I execute the Configuration of the Adobe Document Services is a hub via Configuration Wizard and current status is Not executed.
    Please find the attachment for your reference.
    Your help will be appreciated.
    Thanks&Regards,
    Ravikiran.

    Eric Root wrote:
    10.8
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.
    Yes, the lack of compatibility with Rosetta is what's kept me at 10.6.8.  I used to save everything in AOL for Mac OS X, both emails and things I'd written, until AOL came out with a completely different application and I realized that eventually I wouldn't be able to run the old AOL.  Before my last upgrade, from 10.5 to 10.6, I thought I was going to lose the old AOL, so I did convert a bunch of files to Word or pdf or both, and more recently I've converted some others, but I have something like 15 years worth of correspondence and other items, so it would be difficult to convert them all.
    Thanks for the articles.
    Thanks for the backup reminder.  My external hard drive died earlier this week, and so I bought two new ones specifically so that I could backup before upgrading (and so I'd have a backup backup and never be without at least one backup again ). 

  • I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

    If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
    Go to Settings>Safari>Clear History and Website Data
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Maybe you are looking for