REP: 14967: Table definition for ID 739336 is invalid (Original failure Un
I am receiving this error:
05:48:39.60 Err : REP: 14967: SERIALIZACIONDSN:receiver.c(7850): TT16078: Table definition for ID 739336 is invalid (Original failure Unknown )
05:48:39.60 Err : REP: 14967: SERIALIZACIONDSN:receiver.c(5439): TT16187: Transaction 1237856612/3580628684; Error: transient 0, permanent 1
I have checked the table definition ID on sys.tables table. I found this table owns to an oracle cache group called "FED_CENLACES".
I have tried to set the cache group at paused state, and after to set it on again, but error remains. I have stopped cache group agent, and restart it again, but It does not work.
Do you think I must recreate cache group ?
Could this error cause timesten stopped in any time ?
Let me tell you that the application es very important to stay working almost from 8:00 am to 3:00 pm.
I hope you could help me.
Regards.
I attach the cache group definition:
create readonly cache group SERIALIZA.FED_CENLACES_CG
autorefresh
mode full
interval 60000 milliseconds
/* state on */
from
SERIALIZA.FED_CENLACES (
ID_ENLACE NUMBER(5) NOT NULL,
ID_SERVICIO NUMBER(5) NOT NULL,
ID_EMPRESA NUMBER(6) NOT NULL,
DESCRIPCION VARCHAR2(100 BYTE) INLINE NOT NULL,
IP VARCHAR2(20 BYTE) INLINE NOT NULL,
FECHA_CREACION DATE NOT NULL,
CREADO_POR VARCHAR2(30 BYTE) INLINE NOT NULL,
PUERTO NUMBER(5) NOT NULL,
SISTEMA VARCHAR2(30 BYTE) INLINE NOT NULL,
TIPO VARCHAR2(20 BYTE) INLINE NOT NULL,
ESTATUS VARCHAR2(1 BYTE) INLINE NOT NULL,
PROTOCOLO VARCHAR2(8 BYTE) INLINE NOT NULL,
JMS_DESTINO VARCHAR2(50 BYTE) INLINE NOT NULL,
JMS_FUENTE VARCHAR2(50 BYTE) INLINE NOT NULL,
TABLA_MAPEO VARCHAR2(25 BYTE) INLINE NOT NULL,
FECHA_MODIFICACION DATE,
MODIFICADO_POR VARCHAR2(30 BYTE) INLINE,
RETARDO NUMBER,
ENVIO_REPUESTAS_TODOS NUMBER(1),
primary key (ID_ENLACE));
Let me tell you, I have replied DSN to a different machine, and replica is not sending any error message.
create replication SERIALIZA.SERIALREP
element E datastore
master SERIALIZACIONDSN on "CLUSTER1"
transmit nondurable
subscriber SERIALIZACIONDSN on "CLUSTER2"
exclude table
SERIALIZA.CRECIMIENTO,
SERIALIZA.FED_TMENSAJES_SETRIB_INPUT2,
SERIALIZA.FED_TRSEC001_COPY,
SERIALIZA.FED_TRSEC001_INPUT2,
SERIALIZA.PASO,
SERIALIZA.PASO_XY,
SERIALIZA.RESPALDO_001,
SERIALIZA.RESPALDO_SB_IN,
SERIALIZA.RESPALD_001_I,
SERIALIZA.SETRIB_PASO,
SERIALIZA.FED_TMENSAJES_SETRIB_2,
SERIALIZA.FED_TMENSAJES_SETRIBPLUS_2,
SERIALIZA.FED_TMENSAJES_SIVA_2,
SERIALIZA.FED_TMENSAJES_SETRIBPLUS_UNO,
SERIALIZA.TSEC198
exclude cache group
SERIALIZA.COM_TEMISIONES_CG,
SERIALIZA.FED_CENLACES_CG,
SERIALIZA.COM_CEMPRESAS_CG,
SERIALIZA.COM_CMODULOS_CG,
SERIALIZA.FED_TRECXENLS_CG,
SERIALIZA.COM_CDEFORMATOS_CG,
SERIALIZA.FED_CFORMATOS_CG
exclude sequence
SERIALIZA.SEQ_FEDTRSEC001
Regards.
Similar Messages
-
Table Definitions for Safari and Firefox
All of the sudden my method to make a table 100% of the
vertical height of a browser window in Safari and Firefox for the
Mac has ceased to work. It works fine on PCs. I used both
Dreamweaver and GoLive in my efforts. Anythougts on how to more
appropriately or alternatively set this definition correctly?Here's the deal.
A doctype on an HTML page tells the browser how to render the
page. If
there is no doctype, or if there is an invalid one, the page
is rendered in
quirks mode. If there is a valid doctype, the page is
rendered in standards
mode.
DMX inserted a broken doctype on the page (i.e., functionally
equivalent to
no doctype). Earlier versions inserted NO doctype. Hence, all
these pages
are rendered in quirks mode.
In quirks mode, the browser makes an attempt to render
invalid HTML. Not
all browsers attempt the same rendering - so you will see a
variety of
differences, comparing one browser to the next on the same
page.
In standards mode, the browsers all render the same (so they
say - but in
practice, while not true, it's much more uniform).
Table height is invalid HTML. It always has been - it was
never a part of
HTML's specs.
Browsers in quirks mode will try to render table heights.
Browsers in
standards mode willl not.
Geddit?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Poinkster" <[email protected]> wrote in
message
news:ehm0jh$80t$[email protected]..
> All of the sudden my method to make a table 100% of the
vertical height of
> a
> browser window in Safari and Firefox for the Mac has
ceased to work. It
> works
> fine on PCs. I used both Dreamweaver and GoLive in my
efforts. Anythougts
> on
> how to more appropriately or alternatively set this
definition correctly?
>
>
> -
URGENT : replicating master table definition modif
Hi all,
I created a snapshot replicating a table at a master site.
But the problem is that if I altered the master table definition , for example if I add a column and then populate it , then the snapshot does not contain the new column and data added .
So how to resolve it ?
Thank you very much indeed.Hi Ian,
From replication perspective its follow the same methodology as ECC replication to HANA.
You have to install DMIS 2011 component on your APO system to communicate with SLT.
For more details you can refer SAP note: 1759156
Cheers -
Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
ThanksHi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support -
ABAP DDIC table name for structure definition
Hello,
Can anybody tell me what is the name of DDIC table used for storing ABAP structure definition and also its related tables.
Thanks&Regards,
PrajeshHi again,
1. There is one more field
in DD03L table.
2. DEPTH
3. Normally this field will be blank.
4. In your case,
u have 2 common fields.
eg. F2
5. Then
it will be like this in table
F2 - space
F2 - 1
6. The second entry is for DEPTH.
regards,
amit m. -
IMP-00093: Inconsistency between dumpfile constraint definition for table
I am getting the following error while importing table. I have checked and I can see the table and constraint exist.
Anyone know in what situition this warning will be trigger out? Will this warning give any impact to the table or database ? any solutions?
Export file created by EXPORT:V09.02.00 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing PROD_USR's objects into PROD_USR
. . importing table "FLPBABA" 29 rows imported
IMP-00093: Inconsistency between dumpfile constraint definition for table FLPBABA with columns ("FQ_FLPBABA_UPD_TMS" , "F9_FLPBABA_B4_AFTER")
Import terminated successfully with warnings.
Message was edited by:
cocorico78The full error message might explain a little.
Oracle Error :: IMP-00093
Inconsistency between dumpfile constraint definition for table string with columns (string)
Cause
Import failed to locate a base table for a constraint that was defined in the dump file and statistics were not imported.
Action
Check to see if the table and constraint exist. If the table and constraint exist, then report this to Oracle Support Services as an Import internal error. -
2 column definitions for a single table view
Hi Experts,
I have a requirement in which i need 2 column definitions for a single table view.
The requirement is :
..............Week1........... |....................Week2...............
01/01/2007 | 02/01/2007 | 15/01/2007 | 16/01/2007 | 17/01/2007
data.......... | data.......... | data.......... | data.......... | data..........
data.......... | data.......... | data.......... | data.......... | data..........
data.......... | data.......... | data.......... | data.......... | data..........
the weeks shud be displayed for the corresponing dates below......
Is it possible to have 2 column definitions
Please help me out.
Thanks in advanceHi Balaiji,
proceed as follows:
Create a structure in the dictionary called ZSTRU_USR02_F
with field1 type int4
field3 type int4
field3 type int4
Create a table type in the dictionary:
zusr02 line type ZSTRU_USR02_F.
Create a structure in the dictionary:
ZSTRU_USR02
with tab1 type zusr02
and tab2 type zusr02
Create a table type in the dictionary:
zttusr02 line type ZSTRU_USR02
Create a controller (table.do) in a BSP-application
Add the controller class to this controller.
Add a attribute (table) instance public type zttusr02
redefine method do_request, add the following coding:
FIELD-SYMBOLS: <fs_tab> LIKE LINE OF table,
<fs_row> TYPE zstru_usr02_f.
DATA: lirv_view TYPE REF TO if_bsp_page,
lv_int TYPE i.
* Dispatch Input for event handling
dispatch_input( ).
* Navigation requested during Event handling?
IF is_navigation_requested( ) IS NOT INITIAL.
RETURN.
ENDIF.
* get some data into the table.
INSERT INITIAL LINE INTO TABLE table ASSIGNING <fs_tab>.
DO 3 TIMES.
INSERT INITIAL LINE INTO TABLE <fs_tab>-tab1 ASSIGNING <fs_row>.
ADD 1 TO lv_int.
<fs_row>-field1 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field2 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field3 = lv_int.
ENDDO.
DO 3 TIMES.
INSERT INITIAL LINE INTO TABLE <fs_tab>-tab2 ASSIGNING <fs_row>.
ADD 1 TO lv_int.
<fs_row>-field1 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field2 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field3 = lv_int.
ENDDO.
* Create the view
lirv_view ?= create_view( view_name = 'table.htm' ).
* Hand over the data
lirv_view->set_attribute( name = 'table' value = table ).
* Call the view
call_view( lirv_view ).
Create a view called table.htm. Add your controller class as controller class for the view and add the attribute table type zttusr02.
Add the following to the layout:
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
<htmlb:page title = " ">
<htmlb:form>
<htmlb:tableView id = "tableToDisplay"
table = "<%=table%>"
emptyTableText = "No Data"
iterator = "<%=controller%>"
footerVisible = "FALSE"
encode = "TRUE"
width = "100%"/>
</htmlb:form>
</htmlb:page>
</htmlb:content>
Go back to your controller class. Add the interface IF_HTMLB_TABLEVIEW_ITERATOR
Implement the method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS
DATA: lwa_column LIKE LINE OF p_column_definitions.
* Column 1
CLEAR lwa_column.
lwa_column-columnname = 'TAB1'.
lwa_column-title = 'Column 1'.
lwa_column-tooltipheader = 'Tooltip Column 1'.
lwa_column-width = '50%'.
lwa_column-wrapping = 'FALSE'.
lwa_column-horizontalalignment = 'LEFT'.
lwa_column-verticalalignment = 'MIDDLE'.
APPEND lwa_column TO p_column_definitions.
* Column 1
CLEAR lwa_column.
lwa_column-columnname = 'TAB2'.
lwa_column-title = 'Column 2'.
lwa_column-tooltipheader = 'Tooltip Column 2'.
lwa_column-width = '50%'.
lwa_column-wrapping = 'FALSE'.
lwa_column-horizontalalignment = 'LEFT'.
lwa_column-verticalalignment = 'MIDDLE'.
APPEND lwa_column TO p_column_definitions.
Implement the method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START and add:
DATA: lr_tview TYPE REF TO cl_htmlb_tableview.
FIELD-SYMBOLS: <fs_row> LIKE LINE OF table.
ASSIGN p_row_data_ref->* TO <fs_row>.
CASE p_column_key.
WHEN 'TAB1'.
CREATE OBJECT lr_tview.
lr_tview->id = p_cell_id.
GET REFERENCE OF <fs_row>-tab1 INTO lr_tview->table.
lr_tview->footervisible = ''.
lr_tview->width = '100%'.
p_replacement_bee = lr_tview.
WHEN 'TAB2'.
CREATE OBJECT lr_tview.
lr_tview->id = p_cell_id.
GET REFERENCE OF <fs_row>-tab2 INTO lr_tview->table.
lr_tview->footervisible = ''.
lr_tview->width = '100%'.
p_replacement_bee = lr_tview.
ENDCASE.
With this you get a table in a table. Now if you create a second iterator you'll be able to adjust the apperance of the inner table, as well as you can add column headers.
Hope that helps.
Best Regards
Michael -
Error running Table Definition (cktci) Repository Report in Designer 10G
Hi
There seems to be some internal limitation when running the Table Definition Repository Report (cktci).
We have over a thousand tables defined in Designer and if I try to run the report for all tables it falls over with the reports.log saying
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxml 2
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
Not very useful information.
If the report is run using a smaller subset of tables. For example if I use a parameter of A% for the table name then it works OK.
I have been able to create reports up to about 600 pages but after that it falls over. So if I try to run the report with a parameter like S% it will fall over.
Just wondering if anyone else has come across this issue and found a fix.
There is the obvious workaround of running the report for smaller subsets of data but we would like it to be able to run for all tables if possible.
Any feedback appreciated.
Regards,
AdrianSorry for the slow reply. I've been trying a number of different things to get this to work.
I reinstalled Developer as suggested but we don't have a patched version so there were no additional patches to apply. I re-ran the installer anyway to see if it would update anything.
I couldn't find any reference to Developer patches that might fix this issue in metalink.
I also tried messing with the JVM options to give it more memory etc but that didn't help.
After using the Designer diagnostics trace I got the arguments it uses to run the same report from the command line.
This resulted in the same issue. So at least it was consistent from Designer as well as the command line.
This suggests it is a reports issue rather than Designer.
Running the reports trace didn't provide any extra information. Found a bug that suggested changing any formula columns to not return NULL.
Tried updating the report to fix that too but no joy.
I will post here if I discover the solution. -
STRUTS - Cannot retrieve definition for form bean null -aaaarrrrgh
Hi Folks,
my head hurts and i become crazy... i know that a lot of people asked this question before, but i did not found any suitable solution.
I have simple a jsp page, containing a form which should be handled by struts. I tried everything, but i did not found my mistake.
Can anyone help me please?
JSP:
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
<%@ page contentType="text/html;charset=windows-1252"%>
<html:html locale="true">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>Anmeldung f?r GOLEM Quickplayout</title>
</head>
<body>
<html:errors/>
<html:form action="checkLogin.do">
<table cellspacing="3" cellpadding="2" border="0" width="100%" align="left">
<tr>
<td>
<bean:message key="prompt.username"/>
</td>
<td>
<html:text property="username"/>
</td>
</tr>
<tr>
<td>
<bean:message key="prompt.password"/>
</td>
<td>
<html:text property="password"/>
</td>
</tr>
</table>
</html:form>i tryed a lot for the FORM -Tag, for instance:
<html:form action="checkLogin.do"> or
<html:form action="/checkLogin.do"> or
<html:form action="/checkLogin"> but all throws the same exception. :(
struts-config.xml
<form-beans>
<form-bean name="loginForm" type="de.orb.quick.view.LoginForm"/>
</form-beans>
<action-mappings>
<action path="/login" type="de.orb.quick.view.LoginAction" name="loginForm" input="/login.jsp" scope="session" unknown="true">
<forward name="success" path="/showData.jsp"/>
</action>
<action path="/checkLogin" type="de.orb.quick.view.CheckLogonAction" unknown="false" input="/login.jsp">
<forward name="success" path="/storeRequestData.do"/>
<forward name="failure" path="/login.do"/>
</action>
Exception:
javax.servlet.jsp.JspException: Cannot retrieve definition for form bean null
at org.apache.struts.taglib.html.FormTag.lookup(FormTag.java:831)
at org.apache.struts.taglib.html.FormTag.doStartTag(FormTag.java:506)
at _login._jspService(login.jsp:11) [/login.jsp]
LoginAction:
public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException {
return mapping.findForward("success");
LoginForm:
public class LoginForm extends ActionForm {
private String password = "";
private String username = "";
public void reset(ActionMapping mapping, HttpServletRequest request) {
super.reset(mapping, request);
public ActionErrors validate(ActionMapping mapping, HttpServletRequest request) {
return super.validate(mapping, request);
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
}Sorry for this stupid question, but how can i avoid this exception while using struts TagLibs?
I tried to face the jsp with another action, but this does not change anything.
Thank you in advance
Mirkojavax.servlet.jsp.JspException: Cannot retrieve definition for form bean myfrom
at org.apache.struts.taglib.html.FormTag.lookup(FormTag.java:831)
at org.apache.struts.taglib.html.FormTag.doStartTag(FormTag.java:506)
at jsp_servlet.__index._jspService(__index.java:155)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6291)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:97)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3575)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2573)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151) -
ORA-30937: No schema definition for
Here are the steps I followed to load the xml
DBMS_XMLSCHEMA.REGISTERSCHEMA(
SCHEMAURL => 'security.xsd',
SCHEMADOC => BFILENAME('XML_DIR', 'security.xsd')
LOCAL => TRUE
CREATE TABLE TMP_XML_TABLES
xml_document XMLType
XMLType COLUMN xml_document
XMLSchema "security.xsd"
ELEMENT "security"
INSERT INTO TMP_XML_TABLES
VALUES
xmltype
BFILENAME('XML_CLOB_DIR', 'sec.xml'),
nls_charset_id('AL32UTF8')
I am getting below error.
ORA-30937: No schema definition for 'fido_flag' (namespace '##local') in parent '/security/security_
ORA-06512: at "SYS.XMLTYPE", line 295
ORA-06512: at line 1
Below is the XSD and XML file. Please let me know what is wrong with it.
security.xsd
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSPY v2004 rel. 4 U (http://www.xmlspy.com) by Cary Liu (Cary Liu) -->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="security">
<xs:complexType>
<xs:sequence>
<xs:element ref="security_row" minOccurs="0" maxOccurs="unbounded"/>
<xs:element ref="variable_rate_row" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="security_count" type="xs:long" use="optional"/>
<xs:attribute name="variable_rate_count" type="xs:long" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="security_row">
<xs:complexType>
<xs:all>
<xs:element ref="security_id"/>
<xs:element ref="primary_asset_id"/>
<xs:element ref="delay_days"/>
<xs:element ref="arm_indicator"/>
<xs:element ref="camra_abs_und_coll"/>
<xs:element ref="camra_abs_und_coll_cpn"/>
<xs:element ref="initial_principal_pay_date"/>
<xs:element ref="final_principal_pay_date"/>
<xs:element ref="mtg_term"/>
<xs:element ref="original_face"/>
<xs:element ref="pool_number"/>
<xs:element ref="principal_pay_frequency"/>
<xs:element ref="pay_down_date"/>
<xs:element ref="principal_pay_bus_day_rule"/>
<xs:element ref="seasoned_mbs"/>
<xs:element ref="tba_stlmt_month"/>
<xs:element ref="accrual_flag"/>
<xs:element ref="accrual_rule"/>
<xs:element ref="base_payment_date"/>
<xs:element ref="day_count"/>
<xs:element ref="ex_interest_bond_code"/>
<xs:element ref="ex_days"/>
<xs:element ref="ex_div_date"/>
<xs:element ref="last_coupon_date"/>
<xs:element ref="for_bond_security_type"/>
<xs:element ref="dated_date"/>
<xs:element ref="issue_date"/>
<xs:element ref="first_coupon_date"/>
<xs:element ref="second_coupon_date"/>
<xs:element ref="mat_date"/>
<xs:element ref="interest_accrual_method"/>
<xs:element ref="odd_first_coupon_date"/>
<xs:element ref="odd_last_coupon_date"/>
<xs:element ref="payment_eom_rule"/>
<xs:element ref="pay_frequency"/>
<xs:element ref="pay_business_day_rule"/>
<xs:element ref="yield_day_count"/>
<xs:element ref="zero_coupon_type"/>
<xs:element ref="analyst"/>
<xs:element ref="analyst_recomm"/>
<xs:element ref="approval_flag"/>
<xs:element ref="camra_sec_type"/>
<xs:element ref="class"/>
<xs:element ref="comments"/>
<xs:element ref="holding_style"/>
<xs:element ref="issued_capital"/>
<xs:element ref="issued_capital_currency"/>
<xs:element ref="min_denomination"/>
<xs:element ref="price_multiplier"/>
<xs:element ref="pricing_identifier"/>
<xs:element ref="quantity_issued"/>
<xs:element ref="shares_outstanding"/>
<xs:element ref="quantity_type"/>
<xs:element ref="redemption_value"/>
<xs:element ref="scb_industry"/>
<xs:element ref="issue_desc1"/>
<xs:element ref="issue_desc2"/>
<xs:element ref="issue_desc3"/>
<xs:element ref="issue_short_name"/>
<xs:element ref="trading_lot_size"/>
<xs:element ref="unit_factor"/>
<xs:element ref="camra_exercise_date"/>
<xs:element ref="camra_expiration_date"/>
<xs:element ref="alliance_sector"/>
<xs:element ref="alliance_industry"/>
<xs:element ref="apace_security_type"/>
<xs:element ref="camra_gl_type"/>
<xs:element ref="emerg_mkt_ind"/>
<xs:element ref="form_13f_flag"/>
<xs:element ref="instrument_class"/>
<xs:element ref="issue_type"/>
<xs:element ref="mortgage_sector"/>
<xs:element ref="naic_code"/>
<xs:element ref="performance_segment"/>
<xs:element ref="program_type"/>
<xs:element ref="camra_sic_code2"/>
<xs:element ref="camra_sched_d_group"/>
<xs:element ref="camra_sched_d_state"/>
<xs:element ref="security_form"/>
<xs:element ref="security_type_distrib"/>
<xs:element ref="camra_sic_code"/>
<xs:element ref="structured_note_flag"/>
<xs:element ref="underlying_category"/>
<xs:element ref="primary_asset_id_type"/>
<xs:element ref="superticker"/>
<xs:element ref="default_status"/>
<xs:element ref="default_date"/>
<xs:element ref="accrue_in_default_ind"/>
<xs:element ref="ctd_bond"/>
<xs:element ref="contract_size"/>
<xs:element ref="derivative_type"/>
<xs:element ref="delivery_method"/>
<xs:element ref="conversion_factor"/>
<xs:element ref="flex_option_ind"/>
<xs:element ref="leap_option_ind"/>
<xs:element ref="orig_strike_price"/>
<xs:element ref="otc_flag"/>
<xs:element ref="part_paid_percent"/>
<xs:element ref="strike_price"/>
<xs:element ref="put_call_flag"/>
<xs:element ref="strike_price_type"/>
<xs:element ref="pay_currency"/>
<xs:element ref="rec_currency"/>
<xs:element ref="premium_amount"/>
<xs:element ref="warrant_style"/>
<xs:element ref="pay_status"/>
<xs:element ref="tick_amount"/>
<xs:element ref="right_warrant_option_type"/>
<xs:element ref="underlying_cusip"/>
<xs:element ref="var_margin_rule"/>
<xs:element ref="nominal_annual_income"/>
<xs:element ref="dividend_frequency"/>
<xs:element ref="dividend_reinvestment_ind"/>
<xs:element ref="dr_sponsoring"/>
<xs:element ref="dr_sponsor"/>
<xs:element ref="claim_type"/>
<xs:element ref="dated_date_cpi"/>
<xs:element ref="when_issued_ind"/>
<xs:element ref="series"/>
<xs:element ref="tranche"/>
<xs:element ref="guarantee_type"/>
<xs:element ref="deep_discount_ind"/>
<xs:element ref="perpetual_flag"/>
<xs:element ref="maturity_override"/>
<xs:element ref="camra_index_desc"/>
<xs:element ref="camra_index_spread"/>
<xs:element ref="coupon"/>
<xs:element ref="rate_benchmark"/>
<xs:element ref="rate_multiplier"/>
<xs:element ref="spread_to_benchmark"/>
<xs:element ref="rate_reset_frequency"/>
<xs:element ref="rate_base_reset_date"/>
<xs:element ref="reset_lag_days"/>
<xs:element ref="reset_lockout_days"/>
<xs:element ref="next_reset_date"/>
<xs:element ref="rate_calculate_switch"/>
<xs:element ref="rate_reset_bus_day_rule"/>
<xs:element ref="rate_reset_eom_rule"/>
<xs:element ref="rate_type"/>
<xs:element ref="mutual_fund_sponsor"/>
<xs:element ref="regulated_flag"/>
<xs:element ref="tia_1961_flag"/>
<xs:element ref="accumulation_income_flag"/>
<xs:element ref="fsa_indicator"/>
<xs:element ref="income_dist_policy"/>
<xs:element ref="mutual_fund_charge_type"/>
<xs:element ref="holdings_flag"/>
<xs:element ref="issuer_type"/>
<xs:element ref="issuer_id"/>
<xs:element ref="parent_issuer_id"/>
<xs:element ref="country"/>
<xs:element ref="currency"/>
<xs:element ref="country_of_origin"/>
<xs:element ref="risk_country"/>
<xs:element ref="currency_of_earnings"/>
<xs:element ref="currency_of_income"/>
<xs:element ref="currency_of_trade"/>
<xs:element ref="principal_currency"/>
<xs:element ref="exchange"/>
<xs:element ref="state_code"/>
<xs:element ref="muni_insurance"/>
<xs:element ref="conduit"/>
<xs:element ref="muni_note_type"/>
<xs:element ref="muni_issuer"/>
<xs:element ref="obligation_type"/>
<xs:element ref="oes_next_call_date"/>
<xs:element ref="offering_yield"/>
<xs:element ref="remarketing_agent"/>
<xs:element ref="tax_exempt_region"/>
<xs:element ref="fed_wire"/>
<xs:element ref="oid_flag"/>
<xs:element ref="oid_number"/>
<xs:element ref="oi_price"/>
<xs:element ref="camra_moody_sector"/>
<xs:element ref="restricted"/>
<xs:element ref="camra_class_144"/>
<xs:element ref="foreign_restriction_ind"/>
<xs:element ref="foreign_restriction_req"/>
<xs:element ref="sec_144a"/>
<xs:element ref="reg_s"/>
<xs:element ref="prvt_place_ind"/>
<xs:element ref="liquid_flag"/>
<xs:element ref="call_protection_period"/>
<xs:element ref="call_protection_type"/>
<xs:element ref="camra_make_whole_ind"/>
<xs:element ref="camra_conversion_price"/>
<xs:element ref="convertible_flag"/>
<xs:element ref="nra_tax_code"/>
<xs:element ref="tax_relief_at_source_ind"/>
<xs:element ref="tax_withholding_code"/>
<xs:element ref="tax_status"/>
<xs:element ref="voting_rights"/>
<xs:element ref="votes_per_share"/>
<xs:element ref="cum_voting_flag"/>
<xs:element ref="coupon_cap"/>
<xs:element ref="coupon_floor"/>
<xs:element ref="cross_currency_country"/>
<xs:element ref="cross_currency_fwd_rate"/>
<xs:element ref="cross_rate"/>
<xs:element ref="fwd_base_rate"/>
<xs:element ref="fwd_rate"/>
<xs:element ref="fwd_reset_date"/>
<xs:element ref="spot_base_rate"/>
<xs:element ref="spot_cross_rate"/>
<xs:element ref="fwd_point_difference"/>
<xs:element ref="fwd_broker_code"/>
<xs:element ref="fwd_side"/>
<xs:element ref="redemption_currency"/>
<xs:element ref="redenomination_date"/>
<xs:element ref="redenomination_flag"/>
<xs:element ref="amt_flag"/>
<xs:element ref="orig_entrydate"/>
<xs:element ref="orig_enteredby"/>
<xs:element ref="last_entrydate"/>
<xs:element ref="last_enteredby"/>
<xs:element ref="credit_family_id"/>
<xs:element ref="cusip"/>
<xs:element ref="isin"/>
<xs:element ref="sedol"/>
<xs:element ref="ticker"/>
<xs:element ref="apace_accrual_type"/>
<xs:element ref="capital_income_flag"/>
<xs:element ref="wal_date"/>
<xs:element ref="cfb_level_pay"/>
<xs:element ref="pending_corp_action"/>
<xs:element ref="pending_proxy_vote"/>
<xs:element ref="pms_live_indicator"/>
<xs:element ref="pms_price_type"/>
<xs:element ref="spark_flag"/>
<xs:element ref="whittingdale_debt_cat"/>
<xs:element ref="whittingdale_rating"/>
<xs:element ref="whittingdale_code"/>
<xs:element ref="expiration_date"/>
<xs:element ref="maturity_price"/>
<xs:element ref="commencement_date"/>
<xs:element ref="declared_payment_date"/>
<xs:element ref="drawer"/>
<xs:element ref="fv_volatility"/>
<xs:element ref="mv_volatility"/>
<xs:element ref="settle_period"/>
<xs:element ref="trading_margin"/>
<xs:element ref="compound_frequency"/>
<xs:element ref="coupon_rounding"/>
<xs:element ref="duration_to_reset"/>
<xs:element ref="float_rate_index_location"/>
<xs:element ref="periodic_basis_point_cap"/>
<xs:element ref="weighted_average_coupon"/>
<xs:element ref="whittingdale_issuer"/>
<xs:element ref="settlement_location"/>
<xs:element ref="attachment_lower"/>
<xs:element ref="attachment_upper"/>
<xs:element ref="exposure_type"/>
<xs:element ref="nth2default"/>
<xs:element ref="restruct_doc_clause"/>
<xs:element ref="swap_counterparty"/>
<xs:element ref="swaption_issue_date"/>
<xs:element ref="swaption_mat_date"/>
<xs:element ref="apace_call_price"/>
<xs:element ref="apace_call_date"/>
<xs:element ref="apace_callable_flag"/>
<xs:element ref="apace_put_price"/>
<xs:element ref="apace_put_date"/>
<xs:element ref="apace_putable_flag"/>
<xs:element ref="apace_day_count"/>
<xs:element ref="apace_io_ind"/>
<xs:element ref="apace_pass_thru_flag"/>
<xs:element ref="apace_price_method"/>
<xs:element ref="apace_price_source"/>
<xs:element ref="apace_depository_type"/>
<xs:element ref="apace_conv_ratio"/>
<xs:element ref="apace_floating_rate"/>
<xs:element ref="apace_frn_reset_code"/>
<xs:element ref="apace_frn_reset_date"/>
<xs:element ref="apace_step_conversion_date"/>
<xs:element ref="apace_step_conversion_rate"/>
<xs:element ref="apace_accrual_date_code"/>
<xs:element ref="apace_payment_date_code"/>
<xs:element ref="apace_payment_cycle_code"/>
<xs:element ref="apace_par_call_date"/>
<xs:element ref="apace_prerefund_price"/>
<xs:element ref="apace_prerefund_date"/>
<xs:element ref="apace_sink_fund_flag"/>
<xs:element ref="make_whole_call_flag"/>
<xs:element ref="fido_security_type_jvst"/>
<xs:element ref="fido_security_type_jstp"/>
<xs:element ref="fido_issuer_id"/>
<xs:element ref="fido_guarantor_id"/>
<xs:element ref="fido_name"/>
<xs:element ref="draft_id"/>
<xs:element ref="bbsw_at_last_reset"/>
<xs:element ref="delta"/>
<xs:element ref="price"/>
<xs:element ref="benchmark_index_sec"/>
<xs:element ref="index_multiplier"/>
<xs:element ref="index_spread"/>
<xs:element ref="index_link_location"/>
<xs:element ref="index_lag"/>
<xs:element ref="benchmark_rounding"/>
<xs:element ref="index_link_bus_day_rule"/>
<xs:element ref="calculation_type"/>
<xs:element ref="start_day_of_month"/>
<xs:element ref="pms_issue"/>
<xs:element ref="pms_name"/>
<xs:element ref="camra_cusip"/>
<xs:element ref="infoexpress_id"/>
<xs:element ref="issuer_desc"/>
<xs:element ref="parent_issuer_desc"/>
<xs:element ref="lead_mgr"/>
<xs:element ref="co_mgr"/>
<xs:element ref="superticker_desc"/>
<xs:element ref="fmc_id"/>
<xs:element ref="spintl_id"/>
<xs:element ref="tranche_type"/>
<xs:element ref="collateral_type"/>
<xs:element ref="ab_fund_desc"/>
<xs:element ref="adp_number"/>
<xs:element ref="underlying_account_id"/>
</xs:all>
</xs:complexType>
</xs:element>
<xs:element name="variable_rate_row">
<xs:complexType>
<xs:all>
<xs:element ref="security_id"/>
<xs:element ref="primary_asset_id"/>
<xs:element ref="sedol"/>
<xs:element ref="rate_type"/>
<xs:element ref="coupon"/>
<xs:element ref="effective_date"/>
<xs:element ref="delete_flag"/>
<xs:element ref="update_flag"/>
<xs:element ref="last_enteredby"/>
<xs:element ref="last_entrydate"/>
<xs:element ref="pms_live_indicator"/>
</xs:all>
</xs:complexType>
</xs:element>
<xs:element name="security_id" type="xs:string"/>
<xs:element name="primary_asset_id" type="xs:string"/>
<xs:element name="delay_days" type="xs:double" nillable="true"/>
<xs:element name="arm_indicator" type="xs:string" nillable="true"/>
<xs:element name="camra_abs_und_coll" type="xs:string" nillable="true"/>
<xs:element name="camra_abs_und_coll_cpn" type="xs:double" nillable="true"/>
<xs:element name="initial_principal_pay_date" type="xs:date" nillable="true"/>
<xs:element name="final_principal_pay_date" type="xs:date" nillable="true"/>
<xs:element name="mtg_term" type="xs:int" nillable="true"/>
<xs:element name="original_face" type="xs:double" nillable="true"/>
<xs:element name="pool_number" type="xs:string" nillable="true"/>
<xs:element name="principal_pay_frequency" type="xs:string" nillable="true"/>
<xs:element name="pay_down_date" type="xs:string" nillable="true"/>
<xs:element name="principal_pay_bus_day_rule" type="xs:string" nillable="true"/>
<xs:element name="seasoned_mbs" type="xs:string" nillable="true"/>
<xs:element name="tba_stlmt_month" type="xs:string" nillable="true"/>
<xs:element name="accrual_flag" type="xs:string" nillable="true"/>
<xs:element name="accrual_rule" type="xs:string" nillable="true"/>
<xs:element name="base_payment_date" type="xs:string" nillable="true"/>
<xs:element name="day_count" type="xs:string" nillable="true"/>
<xs:element name="ex_interest_bond_code" type="xs:string" nillable="true"/>
<xs:element name="ex_days" type="xs:int" nillable="true"/>
<xs:element name="ex_div_date" type="xs:date" nillable="true"/>
<xs:element name="last_coupon_date" type="xs:date" nillable="true"/>
<xs:element name="for_bond_security_type" type="xs:string" nillable="true"/>
<xs:element name="dated_date" type="xs:date" nillable="true"/>
<xs:element name="issue_date" type="xs:date" nillable="true"/>
<xs:element name="first_coupon_date" type="xs:date" nillable="true"/>
<xs:element name="second_coupon_date" type="xs:date" nillable="true"/>
<xs:element name="mat_date" type="xs:date" nillable="true"/>
<xs:element name="interest_accrual_method" type="xs:string" nillable="true"/>
<xs:element name="odd_first_coupon_date" type="xs:date" nillable="true"/>
<xs:element name="odd_last_coupon_date" type="xs:date" nillable="true"/>
<xs:element name="payment_eom_rule" type="xs:string" nillable="true"/>
<xs:element name="pay_frequency" type="xs:string" nillable="true"/>
<xs:element name="pay_business_day_rule" type="xs:string" nillable="true"/>
<xs:element name="yield_day_count" type="xs:string" nillable="true"/>
<xs:element name="zero_coupon_type" type="xs:string" nillable="true"/>
<xs:element name="analyst" type="xs:string" nillable="true"/>
<xs:element name="analyst_recomm" type="xs:string" nillable="true"/>
<xs:element name="approval_flag" type="xs:string" nillable="true"/>
<xs:element name="camra_sec_type" type="xs:string" nillable="true"/>
<xs:element name="class" type="xs:string" nillable="true"/>
<xs:element name="comments" type="xs:string" nillable="true"/>
<xs:element name="holding_style" type="xs:string" nillable="true"/>
<xs:element name="issued_capital" type="xs:double" nillable="true"/>
<xs:element name="issued_capital_currency" type="xs:string" nillable="true"/>
<xs:element name="min_denomination" type="xs:double" nillable="true"/>
<xs:element name="price_multiplier" type="xs:double" nillable="true"/>
<xs:element name="pricing_identifier" type="xs:string" nillable="true"/>
<xs:element name="quantity_issued" type="xs:double" nillable="true"/>
<xs:element name="shares_outstanding" type="xs:decimal" nillable="true"/>
<xs:element name="quantity_type" type="xs:string" nillable="true"/>
<xs:element name="redemption_value" type="xs:double" nillable="true"/>
<xs:element name="scb_industry" type="xs:string" nillable="true"/>
<xs:element name="issue_desc1" type="xs:string" nillable="true"/>
<xs:element name="issue_desc2" type="xs:string" nillable="true"/>
<xs:element name="issue_desc3" type="xs:string" nillable="true"/>
<xs:element name="issue_short_name" type="xs:string" nillable="true"/>
<xs:element name="trading_lot_size" type="xs:double" nillable="true"/>
<xs:element name="unit_factor" type="xs:double" nillable="true"/>
<xs:element name="camra_exercise_date" type="xs:date" nillable="true"/>
<xs:element name="camra_expiration_date" type="xs:date" nillable="true"/>
<xs:element name="alliance_sector" type="xs:string" nillable="true"/>
<xs:element name="alliance_industry" type="xs:string" nillable="true"/>
<xs:element name="apace_security_type" type="xs:string" nillable="true"/>
<xs:element name="camra_gl_type" type="xs:string" nillable="true"/>
<xs:element name="emerg_mkt_ind" type="xs:string" nillable="true"/>
<xs:element name="form_13f_flag" type="xs:string" nillable="true"/>
<xs:element name="instrument_class" type="xs:string"/>
<xs:element name="issue_type" type="xs:string"/>
<xs:element name="mortgage_sector" type="xs:string" nillable="true"/>
<xs:element name="naic_code" type="xs:string" nillable="true"/>
<xs:element name="performance_segment" type="xs:string" nillable="true"/>
<xs:element name="program_type" type="xs:string" nillable="true"/>
<xs:element name="camra_sic_code2" type="xs:string" nillable="true"/>
<xs:element name="camra_sched_d_group" type="xs:string" nillable="true"/>
<xs:element name="camra_sched_d_state" type="xs:string" nillable="true"/>
<xs:element name="security_form" type="xs:string" nillable="true"/>
<xs:element name="security_type_distrib" type="xs:string" nillable="true"/>
<xs:element name="camra_sic_code" type="xs:string" nillable="true"/>
<xs:element name="structured_note_flag" type="xs:string" nillable="true"/>
<xs:element name="underlying_category" type="xs:string" nillable="true"/>
<xs:element name="primary_asset_id_type" type="xs:string"/>
<xs:element name="superticker" type="xs:string" nillable="true"/>
<xs:element name="default_status" type="xs:string" nillable="true"/>
<xs:element name="default_date" type="xs:date" nillable="true"/>
<xs:element name="accrue_in_default_ind" type="xs:string" nillable="true"/>
<xs:element name="ctd_bond" type="xs:string" nillable="true"/>
<xs:element name="contract_size" type="xs:double" nillable="true"/>
<xs:element name="derivative_type" type="xs:string" nillable="true"/>
<xs:element name="delivery_method" type="xs:string" nillable="true"/>
<xs:element name="conversion_factor" type="xs:double" nillable="true"/>
<xs:element name="flex_option_ind" type="xs:string" nillable="true"/>
<xs:element name="leap_option_ind" type="xs:string" nillable="true"/>
<xs:element name="orig_strike_price" type="xs:double" nillable="true"/>
<xs:element name="otc_flag" type="xs:string" nillable="true"/>
<xs:element name="part_paid_percent" type="xs:double" nillable="true"/>
<xs:element name="strike_price" type="xs:double" nillable="true"/>
<xs:element name="put_call_flag" type="xs:string" nillable="true"/>
<xs:element name="strike_price_type" type="xs:string" nillable="true"/>
<xs:element name="pay_currency" type="xs:string" nillable="true"/>
<xs:element name="rec_currency" type="xs:string" nillable="true"/>
<xs:element name="premium_amount" type="xs:double" nillable="true"/>
<xs:element name="warrant_style" type="xs:string" nillable="true"/>
<xs:element name="pay_status" type="xs:string" nillable="true"/>
<xs:element name="tick_amount" type="xs:double" nillable="true"/>
<xs:element name="right_warrant_option_type" type="xs:string" nillable="true"/>
<xs:element name="underlying_cusip" type="xs:string" nillable="true"/>
<xs:element name="var_margin_rule" type="xs:int" nillable="true"/>
<xs:element name="nominal_annual_income" type="xs:double" nillable="true"/>
<xs:element name="dividend_frequency" type="xs:string" nillable="true"/>
<xs:element name="dividend_reinvestment_ind" type="xs:string" nillable="true"/>
<xs:element name="dr_sponsoring" type="xs:string" nillable="true"/>
<xs:element name="dr_sponsor" type="xs:string" nillable="true"/>
<xs:element name="claim_type" type="xs:string" nillable="true"/>
<xs:element name="dated_date_cpi" type="xs:double" nillable="true"/>
<xs:element name="when_issued_ind" type="xs:string" nillable="true"/>
<xs:element name="series" type="xs:string" nillable="true"/>
<xs:element name="tranche" type="xs:string" nillable="true"/>
<xs:element name="guarantee_type" type="xs:string" nillable="true"/>
<xs:element name="deep_discount_ind" type="xs:string" nillable="true"/>
<xs:element name="perpetual_flag" type="xs:string" nillable="true"/>
<xs:element name="maturity_override" type="xs:string" nillable="true"/>
<xs:element name="camra_index_desc" type="xs:string" nillable="true"/>
<xs:element name="camra_index_spread" type="xs:double" nillable="true"/>
<xs:element name="coupon" type="xs:double" nillable="true"/>
<xs:element name="rate_benchmark" type="xs:string" nillable="true"/>
<xs:element name="rate_multiplier" type="xs:double" nillable="true"/>
<xs:element name="spread_to_benchmark" type="xs:double" nillable="true"/>
<xs:element name="rate_reset_frequency" type="xs:string" nillable="true"/>
<xs:element name="rate_base_reset_date" type="xs:date" nillable="true"/>
<xs:element name="reset_lag_days" type="xs:double" nillable="true"/>
<xs:element name="reset_lockout_days" type="xs:double" nillable="true"/>
<xs:element name="next_reset_date" type="xs:date" nillable="true"/>
<xs:element name="rate_calculate_switch" type="xs:string" nillable="true"/>
<xs:element name="rate_reset_bus_day_rule" type="xs:string" nillable="true"/>
<xs:element name="rate_reset_eom_rule" type="xs:string" nillable="true"/>
<xs:element name="rate_type" type="xs:string" nillable="true"/>
<xs:element name="mutual_fund_sponsor" type="xs:string" nillable="true"/>
<xs:element name="regulated_flag" type="xs:string" nillable="true"/>
<xs:element name="tia_1961_flag" type="xs:string" nillable="true"/>
<xs:element name="accumulation_income_flag" type="xs:string" nillable="true"/>
<xs:element name="fsa_indicator" type="xs:string" nillable="true"/>
<xs:element name="income_dist_policy" type="xs:string" nillable="true"/>
<xs:element name="mutual_fund_charge_type" type="xs:string" nillable="true"/>
<xs:element name="holdings_flag" type="xs:string" nillable="true"/>
<xs:element name="issuer_type" type="xs:string" nillable="true"/>
<xs:element name="issuer_id" type="xs:string" nillable="true"/>
<xs:element name="parent_issuer_id" type="xs:string" nillable="true"/>
<xs:element name="country" type="xs:string" nillable="true"/>
<xs:element name="currency" type="xs:string" nillable="true"/>
<xs:element name="country_of_origin" type="xs:string" nillable="true"/>
<xs:element name="risk_country" type="xs:string" nillable="true"/>
<xs:element name="currency_of_earnings" type="xs:string" nillable="true"/>
<xs:element name="currency_of_income" type="xs:string" nillable="true"/>
<xs:element name="currency_of_trade" type="xs:string" nillable="true"/>
<xs:element name="principal_currency" type="xs:string" nillable="true"/>
<xs:element name="exchange" type="xs:string" nillable="true"/>
<xs:element name="state_code" type="xs:string" nillable="true"/>
<xs:element name="muni_insurance" type="xs:string" nillable="true"/>
<xs:element name="conduit" type="xs:string" nillable="true"/>
<xs:element name="muni_note_type" type="xs:string" nillable="true"/>
<xs:element name="muni_issuer" type="xs:string" nillable="true"/>
<xs:element name="obligation_type" type="xs:string" nillable="true"/>
<xs:element name="oes_next_call_date" type="xs:date" nillable="true"/>
<xs:element name="offering_yield" type="xs:double" nillable="true"/>
<xs:element name="remarketing_agent" type="xs:string" nillable="true"/>
<xs:element name="tax_exempt_region" type="xs:string" nillable="true"/>
<xs:element name="fed_wire" type="xs:string" nillable="true"/>
<xs:element name="oid_flag" type="xs:string" nillable="true"/>
<xs:element name="oid_number" type="xs:int" nillable="true"/>
<xs:element name="oi_price" type="xs:double" nillable="true"/>
<xs:element name="camra_moody_sector" type="xs:string" nillable="true"/>
<xs:element name="restricted" type="xs:string" nillable="true"/>
<xs:element name="camra_class_144" type="xs:string" nillable="true"/>
<xs:element name="foreign_restriction_ind" type="xs:string" nillable="true"/>
<xs:element name="foreign_restriction_req" type="xs:double" nillable="true"/>
<xs:element name="sec_144a" type="xs:string" nillable="true"/>
<xs:element name="reg_s" type="xs:string" nillable="true"/>
<xs:element name="prvt_place_ind" type="xs:string" nillable="true"/>
<xs:element name="liquid_flag" type="xs:string" nillable="true"/>
<xs:element name="call_protection_period" type="xs:int" nillable="true"/>
<xs:element name="call_protection_type" type="xs:string" nillable="true"/>
<xs:element name="camra_make_whole_ind" type="xs:string" nillable="true"/>
<xs:element name="camra_conversion_price" type="xs:double" nillable="true"/>
<xs:element name="convertible_flag" type="xs:string" nillable="true"/>
<xs:element name="nra_tax_code" type="xs:string" nillable="true"/>
<xs:element name="tax_relief_at_source_ind" type="xs:string" nillable="true"/>
<xs:element name="tax_withholding_code" type="xs:string" nillable="true"/>
<xs:element name="tax_status" type="xs:string" nillable="true"/>
<xs:element name="voting_rights" type="xs:string" nillable="true"/>
<xs:element name="votes_per_share" type="xs:int" nillable="true"/>
<xs:element name="cum_voting_flag" type="xs:string" nillable="true"/>
<xs:element name="coupon_cap" type="xs:double" nillable="true"/>
<xs:element name="coupon_floor" type="xs:double" nillable="true"/>
<xs:element name="cross_currency_country" type="xs:string" nillable="true"/>
<xs:element name="cross_currency_fwd_rate" type="xs:double" nillable="true"/>
<xs:element name="cross_rate" type="xs:double" nillable="true"/>
<xs:element name="fwd_base_rate" type="xs:double" nillable="true"/>
<xs:element name="fwd_rate" type="xs:double" nillable="true"/>
<xs:element name="fwd_reset_date" type="xs:date" nillable="true"/>
<xs:element name="spot_base_rate" type="xs:double" nillable="true"/>
<xs:element name="spot_cross_rate" type="xs:double" nillable="true"/>
<xs:element name="fwd_point_difference" type="xs:double" nillable="true"/>
<xs:element name="fwd_broker_code" type="xs:string" nillable="true"/>
<xs:element name="fwd_side" type="xs:string" nillable="true"/>
<xs:element name="redemption_currency" type="xs:string" nillable="true"/>
<xs:element name="redenomination_date" type="xs:date" nillable="true"/>
<xs:element name="redenomination_flag" type="xs:string" nillable="true"/>
<xs:element name="amt_flag" type="xs:string" nillable="true"/>
<xs:element name="orig_entrydate" type="xs:dateTime" nillable="true"/>
<xs:element name="orig_enteredby" type="xs:string" nillable="true"/>
<xs:element name="last_entrydate" type="xs:dateTime" nillable="true"/>
<xs:element name="last_enteredby" type="xs:string" nillable="true"/>
<xs:element name="credit_family_id" type="xs:string" nillable="true"/>
<xs:element name="cusip" type="xs:string" nillable="true"/>
<xs:element name="isin" type="xs:string" nillable="true"/>
<xs:element name="sedol" type="xs:string" nillable="true"/>
<xs:element name="ticker" type="xs:string" nillable="true"/>
<xs:element name="apace_accrual_type" type="xs:string" nillable="true"/>
<xs:element name="capital_income_flag" type="xs:string" nillable="true"/>
<xs:element name="wal_date" type="xs:date" nillable="true"/>
<xs:element name="cfb_level_pay" type="xs:double" nillable="true"/>
<xs:element name="pending_corp_action" type="xs:string" nillable="true"/>
<xs:element name="pending_proxy_vote" type="xs:string" nillable="true"/>
<xs:element name="pms_live_indicator" type="xs:string" nillable="true"/>
<xs:element name="pms_price_type" type="xs:string" nillable="true"/>
<xs:element name="spark_flag" type="xs:string" nillable="true"/>
<xs:element name="whittingdale_debt_cat" type="xs:int" nillable="true"/>
<xs:element name="whittingdale_rating" type="xs:int" nillable="true"/>
<xs:element name="whittingdale_code" type="xs:string" nillable="true"/>
<xs:element name="expiration_date" type="xs:date" nillable="true"/>
<xs:element name="maturity_price" type="xs:double" nillable="true"/>
<xs:element name="commencement_date" type="xs:date" nillable="true"/>
<xs:element name="declared_payment_date" type="xs:date" nillable="true"/>
<xs:element name="drawer" type="xs:string" nillable="true"/>
<xs:element name="fv_volatility" type="xs:double" nillable="true"/>
<xs:element name="mv_volatility" type="xs:double" nillable="true"/>
<xs:element name="settle_period" type="xs:double" nillable="true"/>
<xs:element name="trading_margin" type="xs:double" nillable="true"/>
<xs:element name="compound_frequency" type="xs:string" nillable="true"/>
<xs:element name="coupon_rounding" type="xs:double" nillable="true"/>
<xs:element name="duration_to_reset" type="xs:string" nillable="true"/>
<xs:element name="float_rate_index_location" type="xs:string" nillable="true"/>
<xs:element name="periodic_basis_point_cap" type="xs:decimal" nillable="true"/>
<xs:element name="weighted_average_coupon" type="xs:double" nillable="true"/>
<xs:element name="whittingdale_issuer" type="xs:int" nillable="true"/>
<xs:element name="settlement_location" type="xs:string" nillable="true"/>
<xs:element name="attachment_lower" type="xs:double" nillable="true"/>
<xs:element name="attachment_upper" type="xs:double" nillable="true"/>
<xs:element name="exposure_type" type="xs:string" nillable="true"/>
<xs:element name="nth2default" type="xs:double" nillable="true"/>
<xs:element name="restruct_doc_clause" type="xs:string" nillable="true"/>
<xs:element name="swap_counterparty" type="xs:string" nillable="true"/>
<xs:element name="swaption_issue_date" type="xs:date" nillable="true"/>
<xs:element name="swaption_mat_date" type="xs:date" nillable="true"/>
<xs:element name="apace_call_price" type="xs:double" nillable="true"/>
<xs:element name="apace_call_date" type="xs:date" nillable="true"/>
<xs:element name="apace_callable_flag" type="xs:string" nillable="true"/>
<xs:element name="apace_put_price" type="xs:double" nillable="true"/>
<xs:element name="apace_put_date" type="xs:date" nillable="true"/>
<xs:element name="apace_putable_flag" type="xs:string" nillable="true"/>
<xs:element name="apace_day_count" type="xs:string" nillable="true"/>
<xs:element name="apace_io_ind" type="xs:string" nillable="true"/>
<xs:element name="apace_pass_thru_flag" type="xs:string" nillable="true"/>
<xs:element name="apace_price_method" type="xs:string" nillable="true"/>
<xs:element name="apace_price_source" type="xs:string" nillable="true"/>
<xs:element name="apace_depository_type" type="xs:string" nillable="true"/>
<xs:element name="apace_conv_ratio" type="xs:double" nillable="true"/>
<xs:element name="apace_floating_rate" type="xs:string" nillable="true"/>
<xs:element name="apace_frn_reset_code" type="xs:string" nillable="true"/>
<xs:element name="apace_frn_reset_date" type="xs:date" nillable="true"/>
<xs:element name="apace_step_conversion_date" type="xs:date" nillable="true"/>
<xs:element name="apace_step_conversion_rate" type="xs:double" nillable="true"/>
<xs:element name="apace_accrual_date_code" type="xs:string" nillable="true"/>
<xs:element name="apace_payment_date_code" type="xs:string" nillable="true"/>
<xs:element name="apace_payment_cycle_code" type="xs:string" nillable="true"/>
<xs:element name="apace_par_call_date" type="xs:date" nillable="true"/>
<xs:element name="apace_prerefund_price" type="xs:double" nillable="true"/>
<xs:element name="apace_prerefund_date" type="xs:date" nillable="true"/>
<xs:element name="apace_sink_fund_flag" type="xs:string" nillable="true"/>
<xs:element name="make_whole_call_flag" type="xs:string" nillable="true"/>
<xs:element name="effective_date" type="xs:date"/>
<xs:element name="delete_flag" type="xs:string" nillable="true"/>
<xs:element name="update_flag" type="xs:string" nillable="true"/>
<xs:element name="fido_security_type_jvst" type="xs:int" nillable="true"/>
<xs:element name="fido_security_type_jstp" type="xs:string" nillable="true"/>
<xs:element name="fido_issuer_id" type="xs:int" nillable="true"/>
<xs:element name="fido_guarantor_id" type="xs:int" nillable="true"/>
<xs:element name="fido_name" type="xs:string" nillable="true"/>
<xs:element name="draft_id" type="xs:string" nillable="true"/>
<xs:element name="bbsw_at_last_reset" type="xs:double" nillable="true"/>
<xs:element name="delta" type="xs:double" nillable="true"/>
<xs:element name="price" type="xs:double" nillable="true"/>
<xs:element name="benchmark_index_sec" type="xs:string" nillable="true"/>
<xs:element name="index_multiplier" type="xs:double" nillable="true"/>
<xs:element name="index_spread" type="xs:double" nillable="true"/>
<xs:element name="index_link_location" type="xs:string" nillable="true"/>
<xs:element name="index_lag" type="xs:double" nillable="true"/>
<xs:element name="benchmark_rounding" type="xs:int" nillable="true"/>
<xs:element name="index_link_bus_day_rule" type="xs:string" nillable="true"/>
<xs:element name="calculation_type" type="xs:int" nillable="true"/>
<xs:element name="start_day_of_month" type="xs:int" nillable="true"/>
<xs:element name="pms_issue" type="xs:string" nillable="true"/>
<xs:element name="pms_name" type="xs:string" nillable="true"/>
<xs:element name="camra_cusip" type="xs:string" nillable="true"/>
<xs:element name="infoexpress_id" type="xs:string" nillable="true"/>
<xs:element name="issuer_desc" type="xs:string" nillable="true"/>
<xs:element name="parent_issuer_desc" type="xs:string" nillable="true"/>
<xs:element name="lead_mgr" type="xs:string" nillable="true"/>
<xs:element name="co_mgr" type="xs:string" nillable="true"/>
<xs:element name="superticker_desc" type="xs:string" nillable="true"/>
<xs:element name="fmc_id" type="xs:string" nillable="true"/>
<xs:element name="spintl_id" type="xs:string" nillable="true"/>
<xs:element name="tranche_type" type="xs:string" nillable="true"/>
<xs:element name="collateral_type" type="xs:string" nillable="true"/>
<xs:element name="ab_fund_desc" type="xs:string" nillable="true"/>
<xs:element name="adp_number" type="xs:string" nillable="true"/>
<xs:element name="underlying_account_id" type="xs:string" nillable="true"/>
</xs:schema>
sec.xml
<?xml version="1.0" encoding="ISO-8859-1" standalone="no"?>
<security security_count="1" variable_rate_count="0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="security.xsd">
<security_row><security_id>LZ002359750</security_id><primary_asset_id>B2479G9</primary_asset_id><delay_days xsi:nil="true"></delay_days><arm_indicator xsi:nil="true"></arm_indicator><camra_abs_und_coll xsi:nil="true"></camra_abs_und_coll><camra_abs_und_coll_cpn xsi:nil="true"></camra_abs_und_coll_cpn><initial_principal_pay_date xsi:nil="true"></initial_principal_pay_date><final_principal_pay_date xsi:nil="true"></final_principal_pay_date><mtg_term xsi:nil="true"></mtg_term><original_face xsi:nil="true"></original_face><pool_number xsi:nil="true"></pool_number><principal_pay_frequency xsi:nil="true"></principal_pay_frequency><pay_down_date xsi:nil="true"></pay_down_date><principal_pay_bus_day_rule xsi:nil="true"></principal_pay_bus_day_rule><seasoned_mbs xsi:nil="true"></seasoned_mbs><tba_stlmt_month xsi:nil="true"></tba_stlmt_month><accrual_flag>Y</accrual_flag><accrual_rule>1</accrual_rule><base_payment_date>0831</base_payment_date><day_count>ACT/ACT</day_count><ex_interest_bond_code xsi:nil="true"></ex_interest_bond_code><ex_days xsi:nil="true"></ex_days><ex_div_date xsi:nil="true"></ex_div_date><last_coupon_date>2017-08-31</last_coupon_date><for_bond_security_type>GER</for_bond_security_type><dated_date>2007-08-31</dated_date><issue_date>2007-08-31</issue_date><first_coupon_date>2008-08-31</first_coupon_date><second_coupon_date>2009-08-31</second_coupon_date><mat_date>2017-08-31</mat_date><interest_accrual_method>PER</interest_accrual_method><odd_first_coupon_date xsi:nil="true"></odd_first_coupon_date><odd_last_coupon_date xsi:nil="true"></odd_last_coupon_date><payment_eom_rule>Y</payment_eom_rule><pay_frequency>A</pay_frequency><pay_business_day_rule>BD</pay_business_day_rule><yield_day_count>ACT/ACT</yield_day_count><zero_coupon_type xsi:nil="true"></zero_coupon_type><analyst>SH</analyst><analyst_recomm xsi:nil="true"></analyst_recomm><approval_flag>Y</approval_flag><camra_sec_type xsi:nil="true"></camra_sec_type><class xsi:nil="true"></class><comments xsi:nil="true"></comments><holding_style>BE</holding_style><issued_capital xsi:nil="true"></issued_capital><issued_capital_currency>EUR</issued_capital_currency><min_denomination>50000</min_denomination><price_multiplier>0.01</price_multiplier><pricing_identifier xsi:nil="true"></pricing_identifier><quantity_issued>2250000</quantity_issued><shares_outstanding>2250000</shares_outstanding><quantity_type>PAR</quantity_type><redemption_value>100</redemption_value><scb_industry xsi:nil="true"></scb_industry><issue_desc1>DEUTSCHE BANK AG</issue_desc1><issue_desc2 xsi:nil="true"></issue_desc2><issue_desc3 xsi:nil="true"></issue_desc3><issue_short_name>DEUTSCHE BANK AG</issue_short_name><trading_lot_size>50000</trading_lot_size><unit_factor>1</unit_factor><camra_exercise_date xsi:nil="true"></camra_exercise_date><camra_expiration_date xsi:nil="true"></camra_expiration_date><alliance_sector>230</alliance_sector><alliance_industry>23030</alliance_industry><camra_gl_type xsi:nil="true"></camra_gl_type><emerg_mkt_ind xsi:nil="true"></emerg_mkt_ind><form_13f_flag xsi:nil="true"></form_13f_flag><instrument_class>FI</instrument_class><issue_type>BOND</issue_type><mortgage_sector>ZZ</mortgage_sector><naic_code xsi:nil="true"></naic_code><performance_segment>3</performance_segment><program_type xsi:nil="true"></program_type><camra_sic_code2 xsi:nil="true"></camra_sic_code2><camra_sched_d_group xsi:nil="true"></camra_sched_d_group><camra_sched_d_state xsi:nil="true"></camra_sched_d_state><security_form xsi:nil="true"></security_form><security_type_distrib xsi:nil="true"></security_type_distrib><camra_sic_code xsi:nil="true"></camra_sic_code><structured_note_flag>N</structured_note_flag><underlying_category xsi:nil="true"></underlying_category><primary_asset_id_type>aPACE</primary_asset_id_type><superticker>B2479G9</superticker><default_status>N</default_status><default_date xsi:nil="true"></default_date><accrue_in_default_ind>N</accrue_in_default_ind><ctd_bond xsi:nil="true"></ctd_bond><contract_size xsi:nil="true"></contract_size><derivative_type xsi:nil="true"></derivative_type><delivery_method xsi:nil="true"></delivery_method><conversion_factor xsi:nil="true"></conversion_factor><flex_option_ind xsi:nil="true"></flex_option_ind><leap_option_ind xsi:nil="true"></leap_option_ind><orig_strike_price xsi:nil="true"></orig_strike_price><otc_flag xsi:nil="true"></otc_flag><part_paid_percent xsi:nil="true"></part_paid_percent><strike_price xsi:nil="true"></strike_price><put_call_flag xsi:nil="true"></put_call_flag><strike_price_type xsi:nil="true"></strike_price_type><pay_currencyThen you hit a bug in your version of Oracle. You may want to investigate and update to a newer version. I get the following error when trying to register your schema in 10.2.0.1
ORA-31154: invalid XML document
ORA-19202: Error occurred in XML processing
LSX-00246: invalid QNAME "***_voting_flag"
This error is consistent with Spy 2008 as well (I didn't try Xerces but I've got two that agree so it's good for me). -
How to count number of Relational Table definitions?
Hi,
How can I get the number of tables existing in a particular container? some thing similar to 'select count(1) from tab'. Thanks,No, you don't have to be the repository owner or SYS (very bad idea to log in as SYS to do anything except things that ONLY SYS can do, like upgrade the database). You can be any user that has been granted access to the repository via the repository administration utility. With one caveat:
Before you execute any queries on the CI views, you really ought to activate a workarea with jr_context.set_workarea (workarea_name). This will be GLOBAL_SHARED_WORKAREA if you do not use version control. You must be authorized for the workarea, and will only be able to count table definitions that are in the current workarea. -
How read the flat data by external table definition. Please help me. Thanks
----Following is my code--
create or replace procedure AGE_UPLOAD_SER_RCD1 is
check_drop PLS_INTEGER;
begin
SELECT COUNT(*) INTO check_drop FROM USER_TABLES WHERE TABLE_NAME='EXT_SERVICES_RECEIVED_UPLOAD';
IF (check_drop <> 0) THEN
EXECUTE IMMEDIATE 'DROP Table EXT_SERVICES_RECEIVED_UPLOAD';
END IF;
EXECUTE IMMEDIATE 'CREATE Table EXT_SERVICES_RECEIVED_UPLOAD
ALIEN_NUMBER number(9),
SOCIAL_SECURITY_NUMBER number(9),
INTAKE_DATE date,
CLOSURE_DATE date,
CLOSURE_REASON varchar(200)
ORGANIZATION external
TYPE oracle_loader
DEFAULT DIRECTORY UPLOAD_STAGE_AREA_AE
ACCESS parameters
RECORDS DELIMITED BY ''|''
BADFILE ''ext_services_received.bad''
DISCARDFILE ''ext_services_received.dis''
LOGFILE ''ext_services_received.log''
SKIP 1
FIELDS TERMINATED BY '','' OPTIONALLY ENCLOSED BY ''"''
LOCATION (''AGE_SERVICES_RECEIVED2.TXT'')
REJECT LIMIT unlimited';
end AGE_UPLOAD_SER_RCD1;
--Problem is Unable to read the data-----
---Following is the error log ----
LOG file opened at 07/19/06 15:57:23
Field Definitions for table EXT_SERVICES_RECEIVED_UPLOAD
Record format DELIMITED, delimited by |
Data in file has same endianness as the platform
Rows with all null fields are accepted
Fields in Data Source:
ALIEN_NUMBER CHAR (255)
Terminated by ","
Enclosed by """ and """
Trim whitespace same as SQL Loader
SOCIAL_SECURITY_NUMBER CHAR (255)
Terminated by ","
Enclosed by """ and """
Trim whitespace same as SQL Loader
INTAKE_DATE CHAR (255)
Terminated by ","
Enclosed by """ and """
Trim whitespace same as SQL Loader
CLOSURE_DATE CHAR (255)
Terminated by ","
Enclosed by """ and """
Trim whitespace same as SQL Loader
CLOSURE_REASON CHAR (255)
Terminated by ","
Enclosed by """ and """
Trim whitespace same as SQL Loader
KUP-04021: field formatting error for field SOCIAL_SECURITY_NUMBER
KUP-04023: field start is after end of record
KUP-04101: record 7 rejected in file /data/External_Files/Data_Uploads/DB_Area/Adult_Ed/AGE_SERVICES_RECEIVED2.TXT
error processing column INTAKE_DATE in row 2 for datafile /data/External_Files/Data_Uploads/DB_Area/Adult_Ed/AGE_SERVICES_RECEIVED2.TXT
ORA-01843: not a valid month
error processing column INTAKE_DATE in row 3 for datafile /data/External_Files/Data_Uploads/DB_Area/Adult_Ed/AGE_SERVICES_RECEIVED2.TXT
ORA-01843: not a valid month
error processing column INTAKE_DATE in row 4 for datafile /data/External_Files/Data_Uploads/DB_Area/Adult_Ed/AGE_SERVICES_RECEIVED2.TXT
ORA-01843: not a valid month
error processing column INTAKE_DATE in row 5 for datafile /data/External_Files/Data_Uploads/DB_Area/Adult_Ed/AGE_SERVICES_RECEIVED2.TXT
ORA-01843: not a valid month
error processing column INTAKE_DATE in row 6 for datafile /data/External_Files/Data_Uploads/DB_Area/Adult_Ed/AGE_SERVICES_RECEIVED2.TXT
ORA-01843: not a valid monthWhat does the data look like for INTAKE_DATE field in the data file?
-
Problem in the BDC Table Control for the T.Code VA01
Hi,
I faced probelm in the BDC of the VA01. In the Table Control
the records are entered upto 12 line items. after 13th line item overwrites the first record. How to solve the Problem.
Please help me.or use this
Internal table definition *
data : begin of bdcdata occurs 0.
include structure bdcdata.
data : end of bdcdata.
data: begin of messtab occurs 0.
include structure bdcmsgcoll.
data: end of messtab.
data: v_chr_opengrp type c,
r_matnr like mara-matnr, "variable for material conversion
r_werks like marc-werks, "variable for plant
v_str_fname type string.
data: begin of count2,
inrec(9) type n, " input I_MATERIAL count
create(9) type n, " create count
error(9) type n, " error count
bdc(9) type n, " count of BDC creates
end of count2.
types: begin of ty_source,
partn_numb(10) type n ,"Customer Number 1
ref(035),
sales_org(4) , "Sales Organization
distr_chan(2) , "Distribution Channel
division(002), "DIVISION
doc_type(4) , "Sales Document Type
purch_no(020), "Purchase order
material like vbap-matnr,
reqqty(018),
reqdate(010),
end of ty_source,
begin of ty_header ,
partn_numb(10) ,"Customer Number 1
ref(035),
sales_org(4) , "Sales Organization
distr_chan(2) , "Distribution Channel
division(002), "DIVISION
doc_type(4) , "Sales Document Type
purch_no(020), "Purchase order
end of ty_header,
begin of ty_item,
partn_numb(10) ,"Customer Number 1
ref(035),
material like vbap-matnr,
reqqty(018),
reqdate(010),
end of ty_item.
data : msg(240) type c, " Return Message
e_rec(8) type c, " Error Records Counter
rec_no(8) type c, " Records Number Indicator
s_rec(8) type c, " Successful Records Counter
t_rec(8) type c, " Total Records Counter
v_matnr like mara-matnr.
data: val(2) type n value 01.
data : begin of bdc_itab occurs 0.
include structure bdcdata.
data : end of bdc_itab.
data : t_source type standard table of ty_source with header line,
t_header type standard table of ty_header initial size 1,
t_item type standard table of ty_item initial size 1,
t_target type standard table of bdcdata initial size 1.
data : w_source type ty_source,
w_source1 type ty_source,
w_header type ty_header,
w_item type ty_item,
w_target type bdcdata,
count type i,
count1 type n.
Variable Declaration
data: w_fname type string,
fnam(20),
date1(10),
i(2) type n,
v_count type i,
v_group type apqi-groupid.
*& selection screen
selection-screen :begin of block bl1 with frame title text-001.
parameters : p_fname type rlgrap-filename, "Input file
p_update(1) default 'N', "Input for update mode
p_bdcgrp(12) default 'SD_ORDERS'. "Input for session name
selection-screen end of block bl1.
**&SELECTION SCREEN VALIDATIONS
at selection-screen on value-request for p_fname.
call function 'KD_GET_FILENAME_ON_F4'
exporting
program_name = 'ZMATERIAL'
dynpro_number = '1000'
field_name = 'P_FNAME'
changing
file_name = p_fname.
*& Start of selection
start-of-selection.
if p_fname is initial.
message i016(rp) with 'Please enter a file name'.
leave list-processing.
else.
move p_fname to v_str_fname.
endif.
call function 'GUI_UPLOAD'
exporting
filetype = 'ASC'
filename = v_str_fname
has_field_separator = 'X'
tables
data_tab = t_source
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
sort t_source by ref partn_numb.
loop at t_source into w_source.
add 1 to count2-inrec.
w_source1 = w_source.
AT NEW PARTN_NUMB. "10/31 KVB
at new ref.
w_header-doc_type = w_source1-doc_type..
w_header-sales_org = w_source1-sales_org . "'0001'
w_header-distr_chan = w_source1-distr_chan. "'01'
w_header-division = w_source1-division. " '01'
w_header-purch_no = w_source1-purch_no.
w_header-partn_numb = w_source1-partn_numb.
w_header-ref = w_source1-ref.
append w_header to t_header.
endat.
w_item-partn_numb = w_source1-partn_numb.
w_item-material = w_source1-material.
w_item-reqqty = w_source1-reqqty.
w_item-ref = w_source1-ref.
w_item-reqdate = w_source1-reqdate.
append w_item to t_item.
clear :w_item,w_header.
endloop.
loop at t_header into w_header.
perform bdc_dynpro using 'SAPMV45A' '0101' .
perform bdc_field using 'BDC_CURSOR' 'VBAK-SPART'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'VBAK-AUART' w_header-doc_type.
perform bdc_field using 'VBAK-VKORG' w_header-sales_org.
perform bdc_field using 'VBAK-VTWEG' w_header-distr_chan.
perform bdc_field using 'VBAK-SPART' w_header-division.
perform bdc_dynpro using 'SAPMV45A' '4001' .
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'BDC_CURSOR' 'VBKD-BSTKD'.
perform bdc_field using 'VBKD-BSTKD' w_header-purch_no.
perform bdc_field using 'KUWEV-KUNNR' w_header-partn_numb.
i = 1.
loop at t_item into w_item where partn_numb = w_header-partn_numb
and ref = w_header-ref.
at new partn_numb.
clear count1.
count = 0.
endat.
count = count + 1.
if count gt 5.
clear i.
i = 2.
perform bdc_dynpro using 'SAPMV45A' '4001' .
perform bdc_field using 'BDC_OKCODE' '=POAN'.
endif.
count1 = count1 + 1.
concatenate 'VBAP-POSNR(' i ')' into fnam.
perform bdc_field using fnam
count1.
concatenate 'RV45A-MABNR(' i ')' into fnam.
perform bdc_field using fnam w_item-material.
concatenate 'RV45A-KWMENG(' i ')' into fnam.
perform bdc_field using fnam w_item-reqqty..
concatenate 'RV45A-ETDAT(' i ')' into fnam.
perform bdc_field using fnam w_item-reqdate.
concatenate 'VBKD-BSTKD_E(' i ')' into fnam.
perform bdc_field using fnam w_item-ref.
i = i + 1.
clear: w_item.
endloop.
clear w_header.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform post_transaction.
refresh bdc_itab.
clear bdc_itab.
endloop.
*endloop.
end-of-selection.
perform finalization.
Start new screen *
form bdc_dynpro using program dynpro.
clear bdc_itab.
bdc_itab-program = program.
bdc_itab-dynpro = dynpro.
bdc_itab-dynbegin = 'X'.
append bdc_itab.
endform. "bdc_dynpro
Insert field *
form bdc_field using fnam fval.
if fval <> ''.
clear bdc_itab.
bdc_itab-fnam = fnam.
bdc_itab-fval = fval.
append bdc_itab.
endif.
endform. "bdc_field
**& Form get_filename
text
--> p1 text
<-- p2 text
*form get_filename .
*call function 'WS_FILENAME_GET'
exporting
def_filename = space
def_path = file
mask = ',.,..'
mode = 'N'
title = text-015
importing
filename = file
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
*endform. " get_filename
*& Form post_transaction
text
--> p1 text
<-- p2 text
form post_transaction .
refresh messtab.
clear messtab.
call transaction 'VA01' using bdc_itab
mode p_update
update 'S'
messages into messtab.
read table messtab with key msgtyp = 'E'.
if sy-subrc eq 0.
perform process_error_messages.
add 1 to count2-bdc.
if v_chr_opengrp is initial.
perform bdc_open_group.
endif.
call function 'BDC_INSERT'
exporting
tcode = 'VA01'
tables
dynprotab = bdc_itab
exceptions
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
others = 5.
if sy-subrc <> 0.
case sy-subrc.
when 1.
write: / 'Internal error'.
when 2.
write: / 'Not open error'.
when 3.
write: / 'queue error'.
when 4.
write: / 'tcode invalid error'.
when others.
write: / 'other error'.
endcase.
endif.
else.
add +1 to count2-create.
format intensified off.
format color col_normal.
format color col_normal off.
endif.
clear bdc_itab.
refresh bdc_itab.
endform. " post_transaction
*& Form finalization
text
--> p1 text
<-- p2 text
form finalization .
if v_chr_opengrp = 'X'.
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
endif.
get time.
skip 2.
write: / 'Time', sy-uzeit.
skip.
format color col_total on.
write: / 'Total Records: ', 40 count2-inrec.
write: / 'PERNR not of Emp Group 6 ', 40 count2-error.
write: / 'Records Created: ', 40 count2-create.
write: / 'BDC Create in group: ', 40 count2-bdc.
if v_chr_opengrp = 'X'.
skip 1.
format intensified on.
format color col_negative on.
write: / 'PLEASE USE TRANSACTION "SM35" ',
'TO PROCESS THE GENERATED BDC SESSION ... ',
p_bdcgrp.
endif.
endform. " finalization
*& Form bdc_open_group
text
--> p1 text
<-- p2 text
form bdc_open_group .
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = p_bdcgrp
holddate = sy-datum
keep = 'X'
user = sy-uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
if sy-subrc eq 0.
v_chr_opengrp = 'X'.
endif.
endform. " bdc_open_group
*& Form process_error_messages
text
--> p1 text
<-- p2 text
form process_error_messages .
data: begin of loc_aux_message.
include structure message.
data: end of loc_aux_message.
data : msgno type sy-msgno.
loop at messtab.
move messtab-msgnr to msgno.
call function 'WRITE_MESSAGE'
exporting
msgid = messtab-msgid
msgno = msgno
msgty = messtab-msgtyp
msgv1 = messtab-msgv1
msgv2 = messtab-msgv2
msgv3 = messtab-msgv3
msgv4 = messtab-msgv4
importing
messg = loc_aux_message
exceptions
others = 1.
if sy-subrc eq 0.
format color col_negative on.
write: /10 loc_aux_message.
format color col_negative off.
else.
format color col_negative on.
write: /10 t_source-partn_numb.
write: / 'Error creating message'.
format color col_negative off.
exit.
endif.
endloop.
endform. " process_error_messages -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
Hii ..
need help on this ..
This what I am doing ..
I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same in that order only in my SQL table.
When I run it fails with this error:
ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
SQL Connection is Freed
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
Total Calc Elapsed Time for [test.csc] : [1.44] seconds
=============================================================
I did a simple test on my Sample.basic application then ..
loaded the calc data to it and then used the below script to export to a flat file
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "Level0";
DataExportOverwriteFile ON;
DataExportColFormat OFF;
DataExportDimHeader OFF;
FIX(
"Jan",
"Sales",
"Actual"
/*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
ENDFIX
out put as below:
"Sales"
"100-30","California"
"Jan","Actual",145
Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
but when I create the columns with same name as what its in export
Sales/100-30/Califirnia/Jan/Actual
It created the new rows successfully ..
So with this I think the error which I am getting with my other application might be because of the same column issue .. but then I have created all the columns by looking at the export file only as I did in sample ..
Any idea would be helpful ..
Thanks
Abhishek
IFirst make sure you add
DataExportRelationalFile ON;
to your set commands it is missing
I alwats like to also add
DataExportColHeader dimensionName;
so I am sure what dimension is getting put into the columns.
Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table -1 + the number of members you will be returning as columns in the export
Taking your example Sample basic has 5 dimensions
Measures
Years
Scenario
Product
Market
Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
5 -1 + 1 = 5 columns in your table which is what you found works. Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2
Maybe you are looking for
-
Internal Software error PGC for encore CS3 !!! solved !!!
Almost everybody here knows the next error: PGC "timeline name" has an error at xx:xx:xx:xy internal software error : %0, line timeline name - PGCINFO: name= timeline name, ref=BPGC, time=xx:xx:xx:xy Where the y in time stands for the length of the t
-
Can't get Firefox to work properly behind corporate proxy
I am forced to use Firefox behind our corporate proxy and have to continually make exceptions just to get to sites, but even this doesn't always work. I don't know much about certificates, but I know certificates are issued by our organization for ea
-
Iphone does not appear in itunes when connected to XP computer
I have the latest version of itunes and iphone software. When I connect my iphone 3GS through a USB to my computer (windows XP), the computer recognises the device as a hard drive in "my computer" and I can import photos. However Itunes when opened u
-
Out-file to a line not the end
Hi guys, I have a script problem I'm trying to resolve. I want it so that a user can edit a single line of a txt tile. Is this possible using the out-file command? "out-file 'C:\temp.txt' -append -inputobject $user_input" This will add the line to th
-
Dynamic Tabs Shell : issue with taskflows using pages
Hi, We use the Dynamic tabs shell page template in our application. It works fine when used with taskflows with page fragments. However it errors when trying to render a taskflow with pages instead of fragments as: <FormRenderer><encodeAll> Multiple