URGENT : replicating master table definition modif

Hi all,
I created a snapshot replicating a table at a master site.
But the problem is that if I altered the master table definition , for example if I add a column and then populate it , then the snapshot does not contain the new column and data added .
So how to resolve it ?
Thank you very much indeed.

Hi Ian,
From replication perspective its follow the same methodology as ECC replication to HANA.
You have to install DMIS 2011 component on your APO system to communicate with SLT.
For more details you can refer SAP note: 1759156
Cheers

Similar Messages

URGENT : replicating master structure modification

Hi all,
How to configure the master and/or the snapshot to replicate any structure modifications at the master site ?
Thank you very much.

Hi,
You can use the table for material master MARA from SE11 for creating the flat file. The required fields can be selected from the table based on the description given for the fields to create the flat file.
Regards
Radhika

Reg: Modification of Master Tables using BDC/BAPI

Dear All,
Thanks for Support shown from all of you.
I want the detailed procedure for Modifying the existing data in the Master Tables using BDC's / BAPI's and Dialog programming.
Please send me one example code.
Please Help me Out.
Thanks In Advance.
Regards,
Adinarayana.B

bapi example
REPORT ZMMR_DELETEPO NO STANDARD PAGE HEADING MESSAGE-ID zisb.
tables : zvtls_sap.
*C-- Types Declarations
TYPES : BEGIN OF tp_flatfile_vtls,
        ebeln(10),
        ebelp type ekpo-ebelp,
        END OF tp_flatfile_vtls.
*=====================================================================
                  INTERNAL TABLES DECLARATION
*=====================================================================
DATA: t_flatfile_vtls TYPE tp_flatfile_vtls OCCURS 0 WITH HEADER LINE.
data : begin of t_sapdata occurs 0,
       po like zvtls_sap-posap,
       item like zvtls_sap-itemsap,
       end of t_sapdata.
data : begin of t_flatfile_vtls1 occurs 0,
       po(10),
       item like zvtls_sap-itemsap,
       end of t_flatfile_vtls1.
data : begin of t_update occurs 0,
       mandt like zvtls_sap-mandt,
       povtls like zvtls_sap-povtls,
       itemvtls like zvtls_sap-itemvtls,
       posap like zvtls_sap-posap,
       itemsap like zvtls_sap-itemsap,
       aedat like zvtls_sap-aedat,
       paedt like zvtls_sap-paedt,
       loekz like zvtls_sap-loekz,
       end of t_update.
data : begin of t_poheader occurs 0,
       po like zvtls_sap-posap,
       end of t_poheader.
data : begin of t_poitem occurs 0,
       po like zvtls_sap-posap,
       item like zvtls_sap-itemsap,
       end of t_poitem.
DATA : BEGIN OF T_MESSAGE OCCURS 0,
       MSGTY,
       MSGID(2),
       MSGNO(3),
       MSGTX(100),
       PO like zvtls_sap-povtls,
       item like zvtls_sap-itemvtls,
       END OF T_MESSAGE.
DATA : BEGIN OF t_bapi_poheader OCCURS 0.
        INCLUDE STRUCTURE bapimepoheader.
DATA : END OF t_bapi_poheader.
DATA : BEGIN OF t_bapi_poheaderx OCCURS 0.
        INCLUDE STRUCTURE bapimepoheaderx.
DATA : END OF t_bapi_poheaderx.
DATA : BEGIN OF t_bapi_poitem OCCURS 0.
        INCLUDE STRUCTURE bapimepoitem.
DATA : END OF t_bapi_poitem.
DATA : BEGIN OF t_bapi_poitemx OCCURS 0.
        INCLUDE STRUCTURE bapimepoitemx.
DATA : END OF t_bapi_poitemx.
DATA : BEGIN OF t_bapireturn OCCURS 0.
        INCLUDE STRUCTURE bapiret2.
DATA : END OF t_bapireturn.
*=====================================================================
                  V A R I A B L E S
*=====================================================================
DATA: w_success(6) TYPE n,
      w_bklas like t023-bklas,
      w_curryear(4),
      w_begda like sy-datum,
      w_endda like sy-datum,
      w_begyr(4),
      w_endyr(4),
      w_currmon(2),
      w_assetclass like ankt-anlkl,
      w_price type p,
      w_recordsap type i,
      w_povtls(10),
      w_count type i.
DATA: w_filepath TYPE rlgrap-filename,
       w_rc TYPE sy-subrc,
       w_sscrfields_ucomm1   TYPE sscrfields-ucomm,
       w_file1 TYPE string,
       w_file2 TYPE FILENAME-FILEINTERN.
*=====================================================================
                  C O N S T A N T S
*=====================================================================
CONSTANTS: c_x              TYPE c         VALUE 'X',
           c_hyp            TYPE c         VALUE '-',
           c_err            TYPE bdc_mart VALUE 'E'.
CONSTANTS: c_slash(1)            TYPE c VALUE '/',
            c_hash(1)             TYPE c VALUE '#',
            c_pipe                TYPE c VALUE '|',
            c_1                   TYPE i VALUE 1,
            c_zero                TYPE n VALUE '0',
            c_rg1(3)              TYPE c VALUE 'rg1',
            c_gr3(3)              TYPE c VALUE 'GR3',
            c_gr2(3)              TYPE c VALUE 'GR2',
            c_e(1)                TYPE c VALUE 'E',
            c_filepath(8)         TYPE c VALUE '/interf/',
            c_filetype(10)        TYPE c VALUE 'ASC'.
CONSTANTS : c_bapimepoheaderx   TYPE x030l-tabname
                               VALUE 'bapimepoheaderx',
           c_bapimepoitem      TYPE x030l-tabname
                               VALUE 'bapimepoitem',
           c_bapimepoaccount   TYPE x030l-tabname
                               VALUE 'bapimepoaccount',
           c_t_bapi_poheader(15)        TYPE c
                                        VALUE 't_bapi_poheader',
           c_t_bapi_poitem(13)          TYPE c
                                        VALUE 't_bapi_poitem',
           c_t_bapi_poitemx(14)         TYPE c
                                        VALUE 't_bapi_poitemx',
           c_t_bapi_poheaderx(16)       TYPE c
                                        VALUE 't_bapi_poheaderx'.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS:con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*======================================================================
                       SELECTION SCREEN
*======================================================================
SELECTION-SCREEN BEGIN OF BLOCK inputpath WITH FRAME TITLE text-001.
SELECTION-SCREEN : BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS : p_fore RADIOBUTTON GROUP rg1
                    USER-COMMAND pc,
             p_back RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN : END OF BLOCK blk2.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-003.
PARAMETERS : p_file1 LIKE rlgrap-filename OBLIGATORY MODIF ID gr2.
PARAMETERS : p_afile1 LIKE rlgrap-filename OBLIGATORY MODIF ID gr3.
SELECTION-SCREEN : END OF BLOCK blk1.
SELECTION-SCREEN END OF BLOCK inputpath.
*C-- Initialization Event
INITIALIZATION.
CLEAR w_filepath.
CONCATENATE c_filepath sy-sysid c_slash sy-mandt c_slash INTO
w_filepath.
CONDENSE w_filepath NO-GAPS.
p_file1 = text-008.
p_afile1 = text-009.
*======================================================================
                       SELECTION SCREEN EVENTS
*======================================================================
*C-- Selection Screen Output
AT SELECTION-SCREEN OUTPUT.
IF p_fore = c_x.
    w_sscrfields_ucomm1 = space.
ELSE.
    w_sscrfields_ucomm1 = c_rg1.
ENDIF.
LOOP AT SCREEN.
*C--Modify selection screen if presentation
*C--or application server radio button is chosen
    IF w_sscrfields_ucomm1 = space.
      IF screen-group1 = c_gr3.
        screen-active = c_zero.
      ENDIF.
    ELSE.
      IF screen-group1 = c_gr2.
        screen-active = c_zero.
      ENDIF.
    ENDIF.
    if screen-name = 'P_AFILE1'.
      screen-input = 0.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
*C-- Selection Screen VALUE-REQUEST FOR File path
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
IF p_fore EQ c_x.
    CALL FUNCTION 'F4_FILENAME'
      EXPORTING
        program_name = syst-cprog
        dynpro_number = syst-dynnr
      IMPORTING
        file_name     = p_file1.
ENDIF.
*C-- At Start of the Selection Process
START-OF-SELECTION.
IF p_fore EQ c_x.
    w_file1 = p_file1.
ELSE.
    w_file2 = p_afile1.
ENDIF.
IF p_fore EQ c_x. " Presentaion Server
*C--Validations for the input files
    PERFORM validate_pre_file USING p_file1.
*C-- Load the contents of the input file into the internal table
    PERFORM upload_file TABLES t_flatfile_vtls
                        USING w_file1
                        CHANGING w_rc.
    IF w_rc <> 0.
      MESSAGE s006 DISPLAY LIKE c_e.
    ENDIF.
ELSE. " Application Server
*C--Validations for the input files
    PERFORM validate_app_file USING w_file2.
*C-- Load the contents of the input file into the internal table
    PERFORM upload_file_app TABLES t_flatfile_vtls
                            USING w_file2
                            CHANGING w_rc.
ENDIF.
loop at t_flatfile_vtls.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = t_flatfile_vtls-ebeln
      IMPORTING
        output = t_flatfile_vtls1-po.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = t_flatfile_vtls-ebelp
      IMPORTING
        output = t_flatfile_vtls1-item.
    append t_flatfile_vtls1.
    clear t_flatfile_vtls1.
endloop.
perform get_podata.
loop at t_poheader.
    perform move_to_bapi.
    perform call_bapi.
endloop.
PERFORM STORE_MESSAGES TABLES T_MESSAGE.
*&      Form validate_pre_file
    Routine to validate presentation server file path.
     -->fp_name text
FORM validate_pre_file USING fp_name TYPE rlgrap-filename.
DATA : l_result,
         l_filename TYPE string.
l_filename = fp_name.
CLEAR l_result.
CALL METHOD cl_gui_frontend_services=>file_exist
    EXPORTING
      file                 = l_filename
    RECEIVING
      result               = l_result
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      wrong_parameter      = 3
      not_supported_by_gui = 4
      OTHERS               = 5.
IF sy-subrc <> 0.
    MESSAGE s007 DISPLAY LIKE c_e.
    LEAVE LIST-PROCESSING.
ELSEIF l_result IS INITIAL.
    MESSAGE s008 DISPLAY LIKE c_e.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.                    " validate_pre_file_hdr
*&      Form validate_app_file
      text - Checks if the path entered and filename is correct
FORM validate_app_file USING fp_file TYPE FILENAME-FILEINTERN.
data : l_fname(60).
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = FP_FILE
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = L_FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC = '0'.
    OPEN DATASET L_FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
      MESSAGE s007 DISPLAY LIKE c_e.
    ELSE.
      CLOSE DATASET l_fname.
    ENDIF.
ENDIF.
ENDFORM.                    " validate_app_file
*&      Form upload_file
      Routine to upload data from file to tables.
     -->P_fp_flatfile
     -->P_fp_file
     <--P_fp_rc
FORM upload_file TABLES   fp_flatfile
                  USING    fp_file TYPE string
                  CHANGING fp_rc TYPE sy-subrc.
IF fp_flatfile[] IS INITIAL.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = fp_file
        filetype                = c_filetype
        has_field_separator     = c_x
      TABLES
        data_tab                = fp_flatfile
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        OTHERS                  = 17.
    MOVE sy-subrc TO fp_rc.
ENDIF.
ENDFORM. " upload_file
*&      Form upload_file_app
      text
     -->FP_FLATFILEtext
     -->FP_FILE    text
     -->FP_RC      text
FORM upload_file_app TABLES   fp_flatfile
                      USING    fp_file TYPE FILENAME-FILEINTERN
CHANGING fp_rc TYPE sy-subrc.
DATA: l_string TYPE tedata-data.
DATA: wa_data_file TYPE tp_flatfile_vtls,
        l_wllength TYPE i,
        FNAME(60).
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = FP_FILE
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC = 0.
    OPEN DATASET FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
*C-- commented by Bikash
     MESSAGE s107(yaero_ps) DISPLAY LIKE c_e.
      message e008.
    ELSE.
      DO.
        CLEAR: l_string.
        READ DATASET FNAME INTO l_string LENGTH l_wllength.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          SPLIT l_string AT con_tab INTO   wa_data_file-ebeln
                                           wa_data_file-ebelp.
          APPEND wa_data_file TO fp_flatfile.
        ENDIF.
      ENDDO.
      CLOSE DATASET FNAME.
    ENDIF.
ENDIF.
ENDFORM. " upload_file_app
*&      Form get_podata
      text
form get_podata.
select *
into table t_update
from zvtls_sap
for all entries in t_flatfile_vtls1
   where itemvtls = t_flatfile_vtls1-item
and povtls = t_flatfile_vtls1-po.
sort t_update by posap itemsap.
loop at t_update.
    at new posap.
      t_poheader-po = t_update-posap.
      append t_poheader.
      clear t_poheader.
    endat.
    t_poitem-po = t_update-posap.
    t_poitem-item = t_update-itemsap.
    append t_poitem.
    clear t_poitem.
    t_update-paedt = sy-datum.
    t_update-loekz = 'X'.
    modify t_update.
endloop.
modify zvtls_sap from table t_update.
endform.                    "get_podata
*&      Form move_to_bapi
      text
form move_to_bapi.
t_bapi_poheader-po_number = t_poheader-po.
CLEAR t_bapi_poheaderx.
PERFORM fill_check_structure USING c_bapimepoheaderx
                                     c_t_bapi_poheader
                                     c_t_bapi_poheaderx
                                     c_x.
refresh : t_bapi_poitem,t_bapi_poitemx.
loop at t_poitem where po = t_poheader-po.
    clear t_bapi_poitem.
    t_bapi_poitem-po_item = t_poitem-item.
    t_bapi_poitem-delete_ind = 'X'.
    CLEAR t_bapi_poitemx.
    PERFORM fill_check_structure USING c_bapimepoitem
                                       c_t_bapi_poitem
                                       c_t_bapi_poitemx
                                       c_x.
    t_bapi_poitemx-po_item = t_poitem-item.
    t_bapi_poitemx-po_itemx = c_x.
    APPEND t_bapi_poitem.
    APPEND t_bapi_poitemx.
    clear t_bapi_poitem.
    clear t_bapi_poitemx.
endloop.
endform.                    "move_to_bapi
*&      Form call_bapi
      This form Routine is used to commit the data records
FORM call_bapi .
DATA : l_msgty      TYPE c,
         l_msgid(2)   TYPE c,
         l_msgno(3)   TYPE c,
         l_msgtx(100) TYPE c,
         l_errflag    TYPE c.
CLEAR: t_bapireturn.
REFRESH: t_bapireturn.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = T_POHEADER-PO
      POHEADER      = T_BAPI_POHEADER
      POHEADERX     = T_BAPI_POHEADERX
    TABLES
      RETURN        = T_BAPIRETURN
      POITEM        = T_BAPI_POITEM
      POITEMX       = T_BAPI_POITEMX.
READ TABLE t_bapireturn WITH KEY type = c_err TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = c_x.
ENDIF.
*C-- Write messages
WRITE: / 'PO Number', t_poheader-po.
clear : t_update,w_povtls.
read table t_update with key posap = t_poheader-po.
w_povtls = t_update-povtls.
CLEAR l_errflag.
LOOP AT t_bapireturn.
    CLEAR: l_msgty, l_msgid, l_msgno, l_msgtx.
    l_msgty = t_bapireturn-type.
    l_msgid = t_bapireturn-id.
    l_msgno = t_bapireturn-number.
    l_msgtx = t_bapireturn-message.
    WRITE: / l_msgty, l_msgid, l_msgno, l_msgtx.
    if l_msgtx cs t_poheader-po.
      w_count = w_count + 1.
      loop at t_update.
        if sy-tabix = w_count.
          t_message-item = t_update-itemvtls.
        endif.
      endloop.
    endif.
    t_message-msgty = l_msgty.
    t_message-msgid = l_msgid.
    t_message-msgno = l_msgno.
    t_message-msgtx = l_msgtx.
    t_message-po = w_povtls.
    append t_message.
    clear t_message.
    IF l_msgty EQ c_err.
      l_errflag = c_x.
    ENDIF.    " l_msgty EQ 'E'
ENDLOOP.
ULINE.
IF l_errflag NE c_x.
    w_success = w_success + 1.
ENDIF.    " l_errflag NE C_X
endform.                    "call_bapi
*&      Form fill_check_structure
      This form Routine will check whether the specified structure
      exist/active
FORM fill_check_structure USING    fp_tabname TYPE any
                                    fp_orgtabname TYPE any
                                    fp_chktabname TYPE any
                                    fp_check TYPE c.
FIELD-SYMBOLS : <fs_chk>, <fs_org>.
DATA:    l_char1(61) TYPE c,
           l_char2(61) TYPE c.
DATA:    BEGIN OF tl_nametab OCCURS 60.
          INCLUDE STRUCTURE x031l.
DATA:    END OF tl_nametab.
REFRESH tl_nametab.
CALL FUNCTION 'RFC_GET_NAMETAB'
    EXPORTING
      tabname          = fp_tabname
    TABLES
      nametab          = tl_nametab
    EXCEPTIONS
      table_not_active = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
    CLEAR tl_nametab.
ENDIF.
LOOP AT tl_nametab.
    CLEAR: l_char1, l_char2.
    CONCATENATE fp_chktabname c_hyp tl_nametab-fieldname INTO l_char1.
    ASSIGN (l_char1) TO <fs_chk>.
    CONCATENATE fp_orgtabname c_hyp tl_nametab-fieldname INTO l_char2.
    ASSIGN (l_char2) TO <fs_org>.
    IF <fs_org> IS NOT INITIAL.
      <fs_chk> = fp_check.
    ENDIF.
ENDLOOP.
ENDFORM.                    " fill_check_structure
*&      Form STORE_MESSAGES
      text
     -->FP_MESSAGEStext
FORM STORE_MESSAGES TABLES FP_MESSAGES STRUCTURE T_MESSAGE.
DATA: wl_output_data LIKE t_MESSAGE.
DATA: l_catstr TYPE string.
DATA: l_fieldvalue TYPE string.
DATA: l_index TYPE i VALUE 1.
DATA: L_FNAME(60).
FIELD-SYMBOLS <fs>.
CLEAR l_catstr.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = '/USR/SAP/VTLS/POCHANGE/LOG'
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = L_FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC = '0'.
    IF fp_messages[] IS NOT INITIAL.
      OPEN DATASET L_FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
        LEAVE LIST-PROCESSING.
      ELSE.
        LOOP AT fp_messages INTO wl_output_data.
          DO.
           ASSIGN COMPONENT l_index OF STRUCTURE wl_output_data TO <fs>.
            IF sy-subrc <> 0.
              EXIT.
            ENDIF.
            MOVE <fs> TO l_fieldvalue.
            IF l_catstr IS NOT INITIAL.
              CONCATENATE l_catstr l_fieldvalue INTO l_catstr SEPARATED
              BY con_tab.
            ELSE.
              MOVE l_fieldvalue TO l_catstr.
            ENDIF.
            l_index = l_index + c_1.
            CLEAR l_fieldvalue.
            CLEAR <fs>.
          ENDDO.
          l_index = c_1.
          TRANSFER l_catstr TO L_FNAME .
          CLEAR wl_output_data.
          CLEAR l_catstr.
        ENDLOOP.
        CLOSE DATASET L_FNAME.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "STORE_MESSAGES

Replicate APO master table data into HANA db via SLT

Hi,
Can anybody help me on replicating SAP APO master table data into SAP HANA by using SLT.
What is the hardware requirement (Version & Patch) for APO system to communicate with SLT and is it the same methodology to follow while replicating ECC data via SLT to HANA or different.
Please treat it urgent and your suggestions highly appreciated.
Thank you,
Ian

Hi Ian,
From replication perspective its follow the same methodology as ECC replication to HANA.
You have to install DMIS 2011 component on your APO system to communicate with SLT.
For more details you can refer SAP note: 1759156
Cheers

REP: 14967: Table definition for ID 739336 is invalid (Original failure Un

I am receiving this error:
05:48:39.60 Err : REP: 14967: SERIALIZACIONDSN:receiver.c(7850): TT16078: Table definition for ID 739336 is invalid (Original failure Unknown )
05:48:39.60 Err : REP: 14967: SERIALIZACIONDSN:receiver.c(5439): TT16187: Transaction 1237856612/3580628684; Error: transient 0, permanent 1
I have checked the table definition ID on sys.tables table. I found this table owns to an oracle cache group called "FED_CENLACES".
I have tried to set the cache group at paused state, and after to set it on again, but error remains. I have stopped cache group agent, and restart it again, but It does not work.
Do you think I must recreate cache group ?
Could this error cause timesten stopped in any time ?
Let me tell you that the application es very important to stay working almost from 8:00 am to 3:00 pm.
I hope you could help me.
Regards.

I attach the cache group definition:
create readonly cache group SERIALIZA.FED_CENLACES_CG
autorefresh
mode full
interval 60000 milliseconds
/* state on */
from
SERIALIZA.FED_CENLACES (
ID_ENLACE NUMBER(5) NOT NULL,
ID_SERVICIO NUMBER(5) NOT NULL,
ID_EMPRESA NUMBER(6) NOT NULL,
DESCRIPCION VARCHAR2(100 BYTE) INLINE NOT NULL,
IP VARCHAR2(20 BYTE) INLINE NOT NULL,
FECHA_CREACION DATE NOT NULL,
CREADO_POR VARCHAR2(30 BYTE) INLINE NOT NULL,
PUERTO NUMBER(5) NOT NULL,
SISTEMA VARCHAR2(30 BYTE) INLINE NOT NULL,
TIPO VARCHAR2(20 BYTE) INLINE NOT NULL,
ESTATUS VARCHAR2(1 BYTE) INLINE NOT NULL,
PROTOCOLO VARCHAR2(8 BYTE) INLINE NOT NULL,
JMS_DESTINO VARCHAR2(50 BYTE) INLINE NOT NULL,
JMS_FUENTE VARCHAR2(50 BYTE) INLINE NOT NULL,
TABLA_MAPEO VARCHAR2(25 BYTE) INLINE NOT NULL,
FECHA_MODIFICACION DATE,
MODIFICADO_POR VARCHAR2(30 BYTE) INLINE,
RETARDO NUMBER,
ENVIO_REPUESTAS_TODOS NUMBER(1),
primary key (ID_ENLACE));
Let me tell you, I have replied DSN to a different machine, and replica is not sending any error message.
create replication SERIALIZA.SERIALREP
element E datastore
master SERIALIZACIONDSN on "CLUSTER1"
transmit nondurable
subscriber SERIALIZACIONDSN on "CLUSTER2"
exclude table
SERIALIZA.CRECIMIENTO,
SERIALIZA.FED_TMENSAJES_SETRIB_INPUT2,
SERIALIZA.FED_TRSEC001_COPY,
SERIALIZA.FED_TRSEC001_INPUT2,
SERIALIZA.PASO,
SERIALIZA.PASO_XY,
SERIALIZA.RESPALDO_001,
SERIALIZA.RESPALDO_SB_IN,
SERIALIZA.RESPALD_001_I,
SERIALIZA.SETRIB_PASO,
SERIALIZA.FED_TMENSAJES_SETRIB_2,
SERIALIZA.FED_TMENSAJES_SETRIBPLUS_2,
SERIALIZA.FED_TMENSAJES_SIVA_2,
SERIALIZA.FED_TMENSAJES_SETRIBPLUS_UNO,
SERIALIZA.TSEC198
exclude cache group
SERIALIZA.COM_TEMISIONES_CG,
SERIALIZA.FED_CENLACES_CG,
SERIALIZA.COM_CEMPRESAS_CG,
SERIALIZA.COM_CMODULOS_CG,
SERIALIZA.FED_TRECXENLS_CG,
SERIALIZA.COM_CDEFORMATOS_CG,
SERIALIZA.FED_CFORMATOS_CG
exclude sequence
SERIALIZA.SEQ_FEDTRSEC001
Regards.

Best practice for replicating Partitioned table

Hi SQL Gurus,
Requesting your help on the design consideration for replicating a partitioned table.
1. 4 Partitioned tables (1 master table with foreign key constraints to 3 tables) partitioned based on monthly YYYYMM
2. 1 table has a XML column in it
3. Monthly switch partition to remove old data, since it is having foreign key constraint; disable until the switch is complete
4. 1 month partitioned data is 60 GB
having said the above, wanted to create a copy of the same tables to a different servers.
I can think of
1. Transactional replication, but then worried about the XML column,snapshot size and the alter switch will make the same thing
on the subscriber or row by row delete.
2. Logshipping with standby with every 15 minutes, but then it will be for the entire database; because I have other partitioned monthly table which is of 250 GB worth.
3. Thinking about replicating the Partitioned table as Non Partitioned, in that case how the alter switch will work. Is it possible to ignore delete when setting up the replication.
3. SSIS or Stored procedure method of moving data on a daily basis.
4. Backup and restore on a daily basis, but this will not work when the source partition is removed.
Ganesh

Plz refer to
http://msdn.microsoft.com/en-us/library/cc280940.aspx

I need a form of the type Master Table - Multiple Detail Tables

I have a BD master table with at least 5 five detail tables to be represent in only one form.
I hope you make some suggestions on how to realize it?
Thanks

OK Shiladitya
Thanks for your info...I'm now trying to link from the master table to 5 MDforms with the same master but occulting all the fields except the name....any suggestions?
My principal goal is howto call (from the links) with the actual master record...it is urgent....help will be very appreciate
Tahnk & Regards

View table and Master table don't match

I am setting up Materialize view replication between two systems connected over a WAN. The number of rows in the master table does not match the number of rows in the Table at the view site. Is there a way I can monitor/watch or otherwise see what replicated transaction are being applied to the view. I know that rows are added to and deleted from this table over the course the the day.

If the master table is always changing, the two tables will never match completely. Take the following scenario:
time 0: Insert row A in master table
time 1: Begin refresh of remote MV
time 2: Insert row B in master table
time 3: End refresh of remote MV
At this point, the master table will have two rows (A & B) while the remote table only has row A. If there is a materialized view log on the master table, row B will be present in the log and will replicate on the next refresh. I'm not aware of any utility that lets you view the data in the materialized view log in a particularly human-readable form, however-- that data is stored in a RAW column.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Master table / detail table: Problem refreshing the content

Hi,
I have a Master table/detail table on my page. When I add a new row to the master or detail table, the new row is inserted in the database, but not shown in the ADF Tables on the page. After restarting the OC4J the ADF Tables show the correct data, including the new rows.
While dropping the collection on my page there were one methodIterator and two accessorIterators created.
In several tutorials the solution for the refresh problem is to change the chacheResult parameter of the methodIterator to false. But this causes in "No row found for rowKey:null" errors.
An other solution should be to create a new invokeAction with the id "tableRefresh" and the corresponding RefreshConditions. This doesn't helps, too.
So how could I solve this problem? I want to update/refresh the master and detail table, after I inserted a new row.
Thanks,
Thomas

Hi,
thanks for your answer.
Sorry, but I forgot to say, that I am using Jdev 10.1.3.1, Toplink, ADF and EJB3.
I think I will give some further informations about the scenario. I created the m/d table by drag-and-droping the object out of the data control palette on site A. Each row stores a goLink item, which navigates to a new page B. After creating and saving the new entry the user navigates back to the page with the m/d table (page A). Storing the new entry is handled by an action in the page B managed bean.
Now the question: How could I re-execute in page B backing bean the iterator which is stored in page A? Could this be handled by an invokeAction? Or is it possible to get access to the iterator used and stored on another page (definition)?
Thanks,
Thomas

Urgent - DropDownbyIndex in Table

Hi,
I have an urgent requirement, where my scenario is - I have two table, 1) Master Tabel 2)InnerTable.
When i select any row in the master table (which contains order no, equipments and Quantity), multiple rows should be selected with the same orderno (as each order there may be any number of equipments), this is done, so now the multiple selected rows data should be send to the InnerTable, which contains a DropDownbyIndex UI - To display the equipments.
Now the data are transferred, but all the values in the DropDownbyIndex is pointing to the same value. For example, if i click first row in the Inner Table, all the row values are the same in the DropdownbyIndex. If I click the second row, then the Second Row value is displayed in all the row...
Pls guide how to get individual value in each dropdownbyindex...
Suggest some PDF - briefing some working examples, which will have DropDownByIndex UI in the table.
Regards,
Guru

Hi Kumara,
If you want to acheive DropDownByIndex indepent of row selection, do the following:
- Create another value node (eg: dropdown) with in the main node for which you will have DropDownByIndex and create the value attribute (ddvalue).
- In properties set the singleton to false for node dropdown.
- Create a supply function from property menu.
Now in implementation tab add the logic to generate DropDownByIndex values. Check the sample code..
public void supplyInternal(IPrivateTestWDAppsView.IInternalNode node, IPrivateTestWDAppsView.IMyTableElement parentElement)
    //@@begin supplyInternal(IWDNode,IWDNodeElement)
     IPrivateTestWDAppsView.IInternalElement ele4 = node.createInternalElement();
     ele4.setIntValue("One");
     parentElement.nodeInternal().addElement(ele4);
     ele4 = node.createInternalElement();
          ele4.setIntValue("TWO");
     parentElement.nodeInternal().addElement(ele4);
     ele4 = node.createInternalElement();
          ele4.setIntValue("THREE");
     parentElement.nodeInternal().addElement(ele4);
    //@@end
Regards
Abhilash

How to select data from all HR Master Tables(PA0000 to PA****)

Hi Gurus!
My requirement is to pick the changedon(AEDTM) , changedby(UNAME) and reason for change(PREAS) from all tables (pa0000 to pa****)of HR in which he made any change during a specific date.
Now if it is specific for two or three tables then inner join can solve it. but now it is the matter of picking data from maximum 9999 tables for which inner join will not be accurate.
plz suggest me any appropriate way to solve it out. or there is any table which store the changes in All HR Master Tables.
Thanking in Advance.
Tahir Naqqash

Hi,
it is very tidious to get it in one go, as u know hr tables contains huge data.
You can chack my wiki in https://wiki.sdn.sap.com/wiki/x/XYC0Aw .
Here you need to make the following modification.
1. in the selection screen set on date range with select option.
2. in the select query, change select * by ur specified fields.
3. change dynamic internal table and ALV as per ur required fields
In this way you have to put the table name and the date range and will get the data.
for repeation u can call the same job in background again and again store data in a seperate internal table and display finaly ..... but huge chance of getting 'Time Out ' error in that case for comparetively large day gap.
Regards,
Anirban

Associations lost after Capture Design of table definition

Hi,
We use Designer 6i, with versioning on.
We have a table definition T and a view definition V that uses the table definition T. In other words, there is an association in Designer between T and V.
When we Capture Design the table T from a database, the association between T and V is lost.
Is there a possibility to get a warning message in the Capture Design process that the association will be lost?
Is it possible to use a preference concerning Capture Design for this?
TIA,
Lennart de Vos

Hi,
Sorry, I didn't describe the problem properly.
I want to Capture Design a table, and not to Capture Design a view.
The issue in Design Editor (DE) is as follows:
(1) Capture Design a table T_CAPDES from the database.
(2) Create a fixed format view definition V_CAPDES in DE, based on columns of the table definition T_CAPDES.
(3) Create in the RON a reference from the view V_CAPDES to the table T_CAPDES, in the node 'Base Tables'.
(4) Modify the table T_CAPDES in the database, e.g. add a column, drop a column or change the datatype of a column.
(5) When you Capture Design the table T_CAPDES, the user receives the following information in the Message Window:
"CDS-15334 Warning: The Table T_CAPDES already exists in the Repository. NOMERGE_AND_SAC Rule selected => the captured property values will not replace the existing property values in the repository..."
The modifications in the table T_CAPDES are not visible in DE: Capture Design has not been executed for this table.
Probably this warning will be generated because of some Capture Design preferences.
A workaround is, to delete the table definition T_CAPDES in Designer and to Capture Design this table again from the database. But a major disadvantage of this workaround is, that the reference from the view definition V_CAPDES will be lost.
Bottom line: I need some more information about the Capture Design preferences in Designer?
Thanks a lot!
Lennart de Vos

USER MASTER TABLES

In which USER MASTER table contain fields FIRSTNAME,LASTNAME....plz send me....Very Urgent...!

Check with the tables below related to USER Details.
USR02
Logon data
USR04
User master authorization (one row per user)
UST04
User profiles (multiple rows per user)
USR10
Authorisation profiles (i.e. &_SAP_ALL)
UST10C
Composit profiles (i.e. profile has sub profile)
USR11
Text for authorisation profiles
USR12
Authorisation values
USR13
Short text for authorisation
USR40
Table for illegal passwords
OBJT
Authorisation objetc table
Reward points if useful.

How to Create Inline Table to Display Detail Data in a Master Table in 11g?

Hi,
I have a requirement to create inline table inside master table to show data.
I found this 10g article for this http://download.oracle.com/docs/cd/B31017_01/web.1013/b28967/web_masterdetail006.htm#BABCDCGE
I couldn't find such option in 11g. Am i missing something? Please let me know where i can find more details.
Required Output:
[+] DepartmentId DepartmentName
[-] DepartmentId DepartmentName
EmployeeId FirstName LastName
EmployeeId FirstName LastName
EmployeeId FirstName LastName
[+] DepartmentId DepartmentName
Also, I tried creating the Page as below (Departments -Employees Relation). i.e I have tried using the ADF treeModel in the bindings and then created a table/inline table manually to populate. The data is available in the iterators (i found using sops in back bean), but the inline table is not showing any data. I tried enabling PPR on detail based on master. But no luck.
<af:table rows="#{bindings.Departments1.rangeSize}"
emptyText="#{bindings.findAllStaff1.viewable ? \'No rows yet.\' :
\'Access Denied.\'}"
var="row" value="#{bindings.Departments1.treeModel}">
<af:column headerText="#{bindings.Departments1.labels.DepartmentId}"
sortable="false" sortProperty="DepartmentId">
<af:outputText value="#{row.DepartmentId}"/>
</af:column>
<af:column headerText="#{bindings.Departments1.labels.DepartmentName}"
sortable="false" sortProperty="DepartmentName">
<af:outputText value="#{row.DepartmentName}"/>
</af:column>
<f:facet name="detailStamp">
<af:table rows="#{bindings.Departments1.rangeSize}"
emptyText="No rows yet." var="detailRow"
value="#{row.children}">
<af:column headerText="#{row.children[0].labels.EmployeeId}"
sortable="false" sortProperty="EmployeeId">
<af:outputText value="#{detailRow.EmployeeId}"/>
</af:column>
<af:column headerText="#{row.children[0].labels.FirstName}"
sortable="false" sortProperty="FirstName">
<af:outputText value="#{detailRow.FirstName}"/>
</af:column>
<af:column headerText="#{row.children[0].labels.LastName}"
sortable="false" sortProperty="LastName">
<af:outputText value="#{detailRow.LastName}"/>
</af:column>
</af:table>
</f:facet>
</af:table>
Thanks in Advance,
Harikiran

Hi,
After reading the above links end-to-end twice, I'm finally able to establish the relationship in UI. I've used iterator for my specific purpose, although it can be done using a table/forEach.
1) Create VOs for Dept and Emp, i.e. DeptVO and EmpVO.
2) Then a View Link on deptID, i.e DeptEmpVL
3) Drag and drop the Dept as AdfTreeTable, b'coz it will create the treeBinding and also add the emp accessor by selecting it in the binding window. (refer to above doc links from BaiG)
4) In my Page UI, i've created a new table and an iterator in the detailStamp.
Dept Table ->
o Value = #{bindings.Departments1.treeModel}
o Var = dept
o varStaus = deptVarStatus
Add these:
Column1-> OutputText -> #{dept.DepartmentId}
Column2-> OutputText -> #{dept.DepartmentName}
Insert into TableFacets -> detailStamp -> iterator
Iterator ->
o Value = #{dept.children}
o Var = emp
o varStatus = empVarStatus
Add these:
OutputText -> #{emp.EmployeeId}
OutputText -> #{emp.EmployeeName}
OutputText -> #{emp.Salary}
This iterator/forEach comes in handy for having n Number of regions inside a layout.
Thanks,
Harikiran

Snapshot replication slow during purge of master table

I have basic snapshot/materialized view replication of a big table (around 6 million rows).
The problem that I run into is that when I run a purge of the master table at the master site (delete dml), the snapshot refresh time becomes slower. After the purge the snapshot refresh time goes back to the normal time interval.
I had thought that the snapshot does a simple select so any exclusive lock on the table should not hinder the performance.
Has anyone seen this problem before and if so what has been the workaround?
The master site and the snapshot site both are 8.1.7.4 and are both unix tru64.
I don't know if this has any relevence but the master database is rule based while the snapshot site is cost based.
thanks in advance

Hello Alan,
Your problem is, to know inside a table-trigger if the actual DML was caused
by a replication or a normal local DML.
One way (I'm practising) to solve (in Oracle 8.1.7) this is the following:
You can use in the trigger code the functions DBMS_SNAPSHOT.I_AM_A_REFRESH(),
DBMS_REPUTIL.REPLICATION_IS_ON() and DBMS_REPUTIL.FROM_REMOTE()
(For details see oracle documentation library)
For example: a trigger (before insert of each row) at the master side
on a table which is an updatable snapshot:
DECLARE
     site_x VARCHAR2(128) := DBMS_REPUTIL.GLOBAL_NAME;
     timestamp_x      DATE;
     value_time_diff     NUMBER;
BEGIN
IF (NOT (DBMS_SNAPSHOT.I_AM_A_REFRESH) AND DBMS_REPUTIL.REPLICATION_IS_ON) THEN
IF NOT DBMS_REPUTIL.FROM_REMOTE THEN
IF inserting THEN
     :new.info_text := 'Hello table; this entry was caused by local DML';
END IF;
END IF;
END IF;
END;
By the way: I've got here at work nearly the same configuration, now in production since a year.
Kind regards
Steffen Rvckel

URGENT : replicating master table definition modif

Similar Messages

Maybe you are looking for