Repair Disk & Repair Permissions Using Leopard Install Disk NOT WORKING!!

I start up from my Leopard disk and click the Mac OS Partition in disk utility and two things go wrong...
Firstly, when I click either verify or repair permissions the progress bar stays as the moving angled lines forever (haven't tried leaving it for more than five minutes though).
Secondly, when I verify my disk it says everything appears to be okay, but when I try and repair the disk it says "The disk Macintosh HD cannot be unmounted" so I am unable to repair my disk. Are these fixable issues or is it a Leopard thing?

UPDATE: I let Repair Permissions run for a good twenty minutes and it worked, just took a long time, this in turn fixed my Repair Disk problem, so I'm all set.

Similar Messages

How to use Leopard Install disk as bootup disk?

I have not tried this, but exactly how is the original Leopard Install disk used as a bootup disk? Is there a way to exactly duplicate this disk in case the original becomes unusable?
Thanks

To duplicate the disc you will need a dual-layer DVD-R and a Mac with a DL burner (check System Profile to assure you have a compatible optical drive.)
Duplicate a CD or DVD
1. Insert the DVD/CD;
2. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
3. from the DU File menu select New | Disk Image from Disk 1;
4. Choose to format the disk image as DVD/CD Master, name the disk image and click Save;
5. When the .cdr file is finished select it with mouse and press COMMAND-I to open the Get Info and check the box to lock the file;
6. Choose the .cdr file from the left side list, click Burn, and insert a new, blank DVD or CD.
It is also possible to create a bootable partition on an external drive that functions exactly as the DVD. You need an external drive partitioned using the GUID partition scheme and formatted Mac OS Extended (Journaled.) You would then clone the DVD to the partition on the external drive as follows:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the external volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the external volume from the left side list and drag it to the Destination entry field.
6. Insert the OS X Installer DVD into the optical drive and wait for it to mount on the Desktop.
7. Select the OS X Installer DVD from the left side list and drag it to the Source entry field.
8. Double-check you got it right, then click on the Restore button.

New Snow Leopard install, Mail not working

I installed Snow Leopard in my late 2006 iMac yesterday. It has gone through all of its updates now. When I try to open Mail it gives me the error message, "You can't use this version of the application Mail.app with this version of Mac OS X. You have Mail.app 3.6."
I would have thought that the install would have installed the appropriate version of Mail, but something's up. Suggestions?
Details:
Model Name:          iMac
Model Identifier:          iMac5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM51.0090.B09
SMC Version (system):          1.9f4
Serial Number (system):          W87042M5VUV
Hardware UUID:          00000000-0000-1000-8000-0017F2CC2056

answer found in How do I update my mail now that I have Snow leopard

How does repair disk function work using an install disk?

Appreciate any input........ thanks...
I need to repair my disk using the "repair" function in disk utility, but the option is blank.., however the message states to use the install disk that came with the Macbook Pro..., but there is no way to access the function....., it only gives the options for a re-install...
anybody have any ideas ?
I also use a timemachine...... is it possible to somehow use this feature to fix my disk ?

Look on the menubar for utilities.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Is it possible to use the snow leopard install disk for bootcamp setup?

I'm going to be installing a windows 7 partition through bootcamp on my macbook, but I can no longer find the two original install disks that it came with. So my question was whether or not its possible to go through the bootcamp process with the snow leopard install disk?

Do you mean a "Retail OSX Snow Leopard Install DVD for USD 29" ?
If so, then yes. use it.
Sounds to me like the Original Install Discs you refer to are OSX 10.5 Leopard ones, right ?
These won't work with Windows 7 since Windows 7 requires OSX Snow Leopard DVD at minimum for the Driver Installation and BootCamp Assistant version 3.x as well, which is also only avaiable in OSX Snow Leopard.
http://support.apple.com/kb/HT1899
Stefan

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Can't get past language selection with Leopard Install disk

My 1 year old Intel Mac Mini, which had been running 10.5.4 without problems suddenly froze up. The mouse was still active but I couldn't click anything. I turned the system off with the power button. When I restarted it got as far as the login screen, but clicking the user didn't do anything. I was able to log in using safe mode (hold down shift when starting). I ran the disc utility, repaired permissions and verified the disc. Seemed OK, but still the same behavior (freeze at login screen) when I try to boot normally.
I tried booting from the Leopard install disk. When it reached the language selection page there were some strange-looking horizontal lines in the display. Clicking the "proceed" button caused a copy of the button's graphic to appear at the top of the page and nothing else happened. Very puzzling, since I had upgraded OS X using that same disc.
I have a Superduper backup from a couple of weeks ago. It won't boot up normally either. Any ideas? Unfortunately, I'm 2 weeks out of warranty!
Thanks,
jwstex

I would probably start looking at the ram to see if it's worked loose or a board has gone bad (rare, but it happens).
Make sure no external drives or other unnecessary connections.
If the ram doesn't fix the problem, then you could also Zap the PRAM by holding down the Command + Option + P + R keys during boot up. Hold down the keys until the Mac goes through 3 startup chimes, then just release the keys and continue to boot normally. Check your clock settings if it boots.
http://support.apple.com/kb/HT1379

Leopard Install Disk Won't Boot

I have Tiger installed on my PowerBook G4 right now, and just got it repaired so thought now's as good a time as any to upgrade to Leopard. Only problem is I can't get the install disk to boot. I've tried both methods. Inserting the disk and clicking install OS X, restarting from there and allowing the system to restart using the DVD as the destination volume. Also tried just holding down C during a restart with the DVD in there. Both result in the same incomplete boot. It stays on the grey Apple screen for an abnormally long time before going to a light blue screen, then to a black/dark grey screen where I get a beach ball that spins for all eternity. The disk sounds like its spinning and processing and wanting to do something in the drive, but alas, it does not. Now I tried to boot with the same Leopard install disk on my iMac, and didn't have a problem at all. So needless to say, a little confused. If anyone has any ideas on how to remedy the situation, please let me know. Thanks.

Is your Leopard installer a retail installer which looks like *, and it does not say:
DropIn, Update, or Upgrade on it?
If not, you must purchase Leopard retail.
If your Powerbook lacks 512 MB of RAM, that could also prevent it from installing.
- * Links to images hosted on my website may give me compensation.

Video Ram failed, won't boot from Leopard Install Disk

Hello,
Recently, I ran the techtools software, and got a report that my video ram had failed. It was suggested that I attempt to reinstall OSX. I put in the Leopard install disk, click the install or setup button or whatever it is, click to restart. When it restarts, a gray screen comes up, but the computer never actually boots up, from either the DVD or my hard disk.
Any suggestions?

Welcome to the Apple Discussions!
Since your MacBook is still very new, you shouldn't have an problem with the DVD. If I were you, I'd call AppleCare Support and have someone walk you through re-installing Mac OS X. However, I really doubt this will help resolve what seems to be a hardware failure on your MacBook. Hopefully the folks at AppleCare Support can help figure out if you need to send your MacBook in for repairs.
-Doug

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

How do you make a back-up copy of the OSX Leopard Install Disk 1?

I'd like to make a back-up copy of +Leopard Install Disk #1+ but I only have one DVD read/write machine onboard the Mac Pro.
Can I insert the Leopard DVD, copy it to my desktop, remove it from the drive, insert a blank DVD and burn the contents to the blank DVD?
I'm trying to create a simple bootable Leopard DVD that will enable me to (a) boot up, then restore my System HD from a Time Machine Archive; and/or (b) run +Disk Utility+ from a source other than the main System HD if necessary.
I know I can do these things from the original Leopard Install DVD but I'm trying to preserve it and use it as little as possible in the event I need to reinstall Leopard.

In addition to Malcolm's instructions I want to point out that you need a Dual Layer
DVD+R (or -R) for this. Those are quite flaky and some might not work or not work well when you burn them. I was recommended Verbatim DL DVD+R as being reliable. try those.
also, instead of burning to a copy of the install Disk 1 to a DVD you can clone it to a partition on your hard drive. Just make a small partition, insert the DVD, select it in Disk Utility and click on "restore" tab. select the DVD as the source and the partition as the target and hit "restore". this will give you a very fast bootable installer right on your hard drive.

Making a copy of Leopard Install Disk

Hi there,
A while back I copied the contents of my Leopard install disk by simply dragging the files from the Disk into a new folder on my Desktop with the idea of making a back up copy in case I lost my original DVD. So recently my G4 started to slow up a little so I decided to de-clog it by doing a clean erase and install. However when I double click the "Install Mac OS X.app" icon and a dialogue appears saying:
"The application "Install Mac OS X" cannot be used from this volume. To install Mac OS X, please use the application provided on the Mac OS X installation disc."
So I went to find my original disk and it has simply disappeared.
So my question is If I make a disk image of the copied Leopard disk files that are on my desktop then burn it, can I install then from that Disk.
All and any help would be greatly appreciated.
Thank you

Unfortunately, your drag & drop backup copy of the OS X install disc is no good. An install disc, like all bootable Mac OS X volumes, contains a bunch of hidden files and directories that are essential for booting, and a Finder drag & drop copy misses all of those. So the backup you thought you made is incomplete, and there's nothing you can do to fix it.
You'll have to get your hands on a replacement set of install discs. If it was a retail Leopard DVD your only option (if it is truly lost) will to be to buy another one, I'm afraid to say.
In the future, a good way to make a backup copy of the Leopard install disc is to use Disk Utility to make a disk image of it. You can then burn a copy of the disk image to a DVD+R DL disc if you want, and boot from that.

Mac Pro gets kernel panic while trying to boot from Leopard install disk

Hi all,
I'm finally getting around to installing leopard on my 2006 Mac Pro. It has the x1900 video card from Apple and all firmware is up to date. The install disk upgraded my Macbook with no problems.
When booting I get the wipe to grey, kernel panic, "You must restart your Mac" screen. Any suggestions?
BTW the Leopard install disk installs OSX 10.5.0
Thanks
Pax

I finally found that the mac pro needs installer 10.5.2 or it will do the kernel panic thing. I did find a way around this though.
1) I took an external drive hooked to my macbook and installed 10.5 on it. Then booted from it and did all the updates, installed all my necessary software (ilife 08, parallels, and so on).
2) I then made sure my Mac pro's drive was currently backed up and then booted up from the backup and then used Carbon Copy Cloner to clone the new OS 10.5.4 Leopard disk onto my Mac Pro boot drive.
3) After that I used migration assistant to transfer all my user settings and such.
It all worked great and I now have Leopard on my Mac Pro.
Just thought I'd let everyone know how I got around it.
Pax

Why does imac G5 eject leopard install disk

Why does imac G5 eject leopard install disk? I'm trying to help my father get online to read the newspaper using an iMac G5 1.8 GHz 17". I've installed a new hard drive and reinstalled software and rus software updates until I've reached 10.4.11 and the lovely "your software is up to date" message. When I put in the Leopard 10.5.1 Install DVD, it auto ejects within 15 seconds and never gets mounted and never shows on desktop. When I place the same DVD in my Intel MacBook Pro running 10.6.8, the disk mounts and the install window opens as usual. Any suggestions on what i'm missing here? thanks

If you doing the internet, you can get by with Tiger. Get TenFourFox.
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
for PPC -- works for me on 10.4. Supports 10.5
tenfourfox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox

Repair Disk & Repair Permissions Using Leopard Install Disk NOT WORKING!!

Similar Messages

Maybe you are looking for