Repair permissions now takes 15-30 minutes

In leopard, permissions repair was slooooow. but upon moving to SL, it got a lot faster - that is, until just recently, probably coinciding with the 10.6.2 update, where it now gets stuck at the "2 minutes remaining" mark for approximately 15-30 minutes. it is at this point, we get the message:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
anyone else experience this?
btw - this is on my wife's white macbook, not my MBP.

K T wrote:
Normal - pretty much everyone gets those. OK to ignore.
http://support.apple.com/kb/TA21041?viewlocale=en_US
-=-=-=-
i've seen this issue before - but my problem is that repairing permissions takes up to half an hour now. on my MBP, which runs the same version of OSX and has a much bigger drive, repairing permissions takes under 5 minutes.
i'm wondering if it's an unrelated issue. is it possible to see what's hanging up the permissions repair?
Message was edited by: bscepter

Similar Messages

  • Repair permissions now takes literally hours

    on my MBP, i can repair permissions in five minutes or so. on my wife's macbook, it takes up to four hours. does anyone know why this may be and how to fix it? both are running the latest version of 10.6.3.

    Carolyn Samit wrote:
    HI,
    on my wife's macbook, it takes up to four hours.
    That shouldn't happen.
    Boot your wife's Macbook from her install disc, run Disk Utility to Verify and if necessary Repair any errors on the startup disk.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
    Carolyn
    thanks for the response. so.... i repaired the disk as you suggested. nada. "the disk appears to be fine." i thought i'd repair permissions from the boot disk. big mistake. it's said, "15 minutes remaining" for the past 30 minutes and isn't budging. plus, now it won't let me quit (or even force quit). i know my wife's HD is quite full - i think there's 12GB free of 80GB total - but that shouldn't be it, should it?

  • Mac book now takes about 10 minutes to start up and all applications "unexpectedly quit" every time before they've opened. What did I do???

    Mac book takes about 10 minutes to start up and all applications "unexpectedly quit" even before they open. What did I do???

    are you using sample base instruments in those projects a lot using exs or kontakt? when paths to samples get messed up for some reason it can result in along waiting times each time a project is loaded.
    lately my kontakt samples get loaded without any sign of activity. if it is a large orchestral score i see a dead screen for quite a while before suddenly everything pops up and is ready to work with. i recall seeing progress bars or similar things in the past though...
    repair permissions and defragging (idefrag) may help as well.
    btw. i can drink as much coffee as i want late at night, even five minutes later i can sleep well. seems i am immune. but right now i am also having plenty of hardware issues to deal with so that's a good thing i guess...!

  • Repaired permissions, now no applications run

    After I repaired permissions, in my user account (not admin), no applications run?
    Anyone know what I did wrong, and how I can fix it?
    Thanks
    it just stalls for ages and doesnt run. Only firefox and adium X is running. ...

    Yes, you can boot up from an external drive. When you get it your will first need to prep the drive before installing OS X on it:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    After the formatting has completed quit DU and return to the installer. Proceed with the OS X installation. When it has finished and rebooted you will be running from the external drive. You should then be able to fix things on the internal drive.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Repaired permissions, now TM doing a full backup?

    Hi, intelligent user who doesn't have much advanced knowledge concerning what Repairing Permissions even means here.
    So I'm planning on replacing my Macbook Pro's HD, and I just finished making a full bootable backup onto a 200GB FW drive using Super Duper, and checked the "Repair Permissions first" option. I figured that having a latest Time Machine backup (1TB Time Capsule) would make sense as well, so before powering down to unscrew the case I did a Back Up Now. It scanned the entire computer and decided that it would backup all 70 GB fresh. I'm assuming this has something to do with having repaired permissions, but I don't quite know what that means. It may be something similar to what recently happened to me, when I erased my whole computer and refreshed from Time Machine, and then on the next backup it did everything over again instead of updating (for that backup I can still browse dates before that happened as long as I start at the root drive).
    Anyone know what I could do to fix this?

    Brian wrote:
    We have to be careful here: there are three different scenarios:
    New computer or logic board. Time Machine identifies your computer by it's +Media Access Control address+ (MAC address), embedded in the hardware of the logic board. There is a way that some folks have gotten around this on Leopard after a new logic board, but it's tedious and very easy to mess up (I did that, twice!) per the link in #C8 of Troubleshooting. (It's very dangerous on a different Mac).
    That was automated for Snow Leopard, resulting in the Re-Use prompt mentioned in #B5 of Troubleshooting. But, as #B5 specifies, Time Machine usually still does a full backup; the advantage is, Time Machine will delete the old backups normally.
    New drive on the same Mac (per the link you provided). I don't believe that works on Snow Leopard, and I've not seen a hack specifically for Snow Leopard posted here.
    Full restore (from Time Machine, a "clone", or otherwise) to the same drive on the same Mac. This almost always results in a new, full backup. An Apple engineer said that would stop with Snow Leopard, but obviously didn't. Some real techie UNIX guru decided there ought to be a way to do it; he posted a two-page log here a few months ago, of altering all sorts of things via Terminal, converting UUIDs to hex, etc., and claimed to have made it work. But he did it only as an exercise, and even he wouldn't recommend it, even to expert UNIX types.
    . . . I suppose the best way to save space on my Time Capsule (it now has at least 3 copies of my entire system with only very minor differences in the existence of some files) would be to make sure I have all the files I will ever want to have backed up, then delete the old records, which is something I presume wouldn't be too hard, make a fresh backup, then delete whatever I don't think I need right now, knowing it will all be found by scrolling back to July of 2010?
    I'd have to agree. It just isn't worth the hassle, or the risk of damaging something that you might not notice for a long time. I have no problem hacking around with most things, but not my backups.
    Depending on whether Time Machine made new sparse bundles, it may not be too tedious to delete the old backups. See #12 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • Repaired permissions, now my iMac wants a password to delete anything.

    I just repaired permissions on my computer (general maintenance), and now when I try to delete something from my desktop it asks for a password. I never set one on my account in the first place. I also need one to delete off the server in Adobe Bridge. How do I fix this?

    See if Linc's suggestion in the following topic will work for you:
    Permissions nightmare: Apple Support Communities
    OT

  • I recently updated to latest version of ITunes for Windows and now takes 2 - 3 minutes to open and does not see my Iphone?  Any suggestions?

    I recently updated my ITines software to version10 and since the update it doesn't recognise my Iphone/  It also takes 2 - 3 minutes from clicking the icon to firing up the software.
    Is anyone else having this problem and how was it resolved?
    Thanks

    Actually, Chris, I found that page yesterday on my own doing a search, before I wrote my post.  After your instructions didn't work, I found that page and tried deleting the iAdcore.dll and that did not work.  When I tried to open it said it didn't have the iAdcore and could not be opened.  There was no QTMovieWin there to delete.  I again uninstalled everything in the order listed on this new page, because there were 7 things to uninstall (not 5 as your last page suggested).  I found that I had iCloud so that was deleted in the proper order.  Did not have MobileMe on the computer.  Also deleted Apple Application support, which wasn't on your list either.  I restarted the computer.  I looked for any files on drive C program files as indicated, and did not find any of those files.  I went to the iTunes page and downloaded the latest version yet again (maybe the 5th time?).  And I got the same notice:
    "The  iTunes Library.itl cannot be found or created.  The default location for this file is in the iTunes folder in the music folder."
    I went to that iTunes folder in the music folder there are a number of iTunes library folders and none of the open except one.  The ones that don't open give me the same dialogue box as above.  The last folder opens to a page of codes, I guess that's what it is.  Gobbeldy gook to me.  But that folder is listed at the top in the URL as itTunes Library.xml.  I don't see any .itl.  Is that the folder I need?  And how do I get that??
    I don't know if that last paragraph is significant, but I thought I'd include just in case it is.
    BTW, can I just download an older version of iTunes?  And how can I find it?  I still have the old version on my old computer which is at home.  Not sure how to get it from that to this one.
    Thanks for hanging in there with me.  Perhaps there is someone else who could help if you can't figure it out.

  • After upgrading to Yosemite, it now takes roughly 3 minutes for my computer to boot up, my sign in is now on my lap top screen and not my aux. screen as it has been and my touchpad won't work until sometime after booting up.

    Slow boot, wrong screen & touchpad not connection correctly

    So are they going to do anything with all of this or just act like Microsoft & hope it'll get better by its-self? I'm pretty disappointed and wish I'd stayed with Mavericks. Is there anyway to go back?

  • Why Repairing Permissions takes so Long

    Is it normal for the Leopard Disk Utility to take a really long time to Verify and/or Repair Permissions?
    Repairing Permissions under Tiger was not bid deal bug in Leopard it really seems slow. There is now a timer but it it not even close. The one minutes can turn into 5 to 15 minutes. I wonder if the delay means there is something wrong with my installation?
    arkay

    There are more permissions for Leopard to check than there were in Tiger. I'm not sure that is the complete explanation but repair permissions does take a long, long time in Leopard and the progress indicator being stuck on 1 minute for so long adds insult to injury. You can post a complaint about it to Aople Feedback.
    http://www.apple.com/macosx/feedback/
    I've not found that verifying permissions is noticeably faster than repairing them so I never use the verify function.

  • Logging into my account now takes 5 minutes

    I've just upgraded from 10.4.11 to 10.6.1 and everything seems to work fine except for the login process which now takes around 5 minutes, rather than the usual few seconds. I boot up the mac, choose my account at the login screen, type in the password and then wait. The login is fine except for the amount of time it takes, which is an inconvenience. Leaving the machine on constantly is not an option as I move it between home and work daily. Any ideas?

    I had such problem too. My one was related to broken firewire port in Intel iMac (under TIger it logs up to 1 min but under Leopard&Snow Leopard it takes up to 7 minutes).
    I solve mine problem by completely removing FireWire kext drivers from system. Do not the same before not sure!!!
    FIrst of all, see what is in your system log (/var/logs/system.log), note, that you should had administrator rights to see it. Also it may be seen from Console (Show Log List > DATABASE SEARCHES > All Messages). See it right after login. There will be messages what the same happens in desired time period (while system is started but before login dialog appearing).
    I think, posting here messages that starts from the time of boot and up to Desktop appearing will be good idea - it may help us to understand yours problem.

  • IPhoto takes 4-5 minutes to launch...new problem as of today

    Hi all, I'm on my phone typing as my Internet is down...all kinds of problems today so bear with me.
    Suddenly today my iPhoto started acting weird. Well, it as well as the other iLife programs. At first I was noticing that, when quitting, the apps would hang, including iPhoto. I'd either have to force quit or give it a good 3 minutes.
    I started by repairing pemissions. That didn't help at all.
    So next I trashed the iPhoto .plist. That really screwed things up as iPhoto would launch, but would only give me the iPhoto window....there was no content.
    I then rebuil the library. When I launched it, it again sat there for a while. However, I did finally pull up my photos, everything intact. So I quit it and launched again...and that brings me to where I'm at. It launches, but it takes approximately 4-5 minutes for it to finally do so. The spinnig wheel is up that whole time. Thus has never happened. All of my iLife apps have always been super snappy, opening in mere seconds. That includes iPhoto...it was one of the fastest, but now takes about 5 minutes to launch.
    The only change tithe machine is that I installed adobe lightroom 3 the other day, but that also seemed fine...meaning the problem just cropped up today.
    This seems to be affecting iTunes as well.
    Any idea what in the world is going on and more importantly, know a remedy? I've done all I know to do per above. Any suggestions? Thanks!

    Okay, here's what I found out. Followed the above instructions...no joy. I think this maybe needs to be posted in a general OS forum, as I'm thinking this is more about that vs just being about iPhoto/iTunes. Here's what I tried and learned.
    A new account allowed iPhoto to open up immediately. However, iTunes seemed a touch slow...not sure if that is just due to it being a new account. So, I deleted that account and moved on to the preferences instructions above.
    I removed all preferences and placed them in a "preferences A" folder on the desktop. Launched iPhoto and got the exact same results. Super slow...took forever to open. Took forever to close. Same with iTunes.
    So I placed all of the removed preferences back into the folder and decided to start launching and closing apps to see what's affected, what's not. Here are the findings.
    iPhoto - The worst of all. Takes 4 minutes to open.
    Mail - Opens fine, closes very slowly...apprx 1 minute
    Calculator - This now opens incredibly slowly. Also noticed that the blue light below a launching app in the dock that seems to radiate was not radiating immediately....just sort of sat there. About a minutes passes, then it radiates for a second and calculator opens. Quitting is instant
    Garageband - Launching is slooooow, quitting is instant.
    Lightroom 3 - quitting is slow....quit results in upper-left menu items flashing once, then beach ball for about 30 seconds.
    These apps check out perfectly fine with no problems launching or quitting: iCal, Safari, Firefox, Aperture, Photoshop (CS3), Illustrator (CS3), InDesign (CS3), Acrobat, Suitcase, Image Capture, Disk Utility, Text Edit, Photo booth, Final Cut Pro.
    So I'm at a loss. This may be more of an OS issue, but figured I'd post here to follow up on the suggestions given. I think I'll pose a question in the OS forums. I'm thinking this might mean boxing up the iMac and making a trip to the genius bar. It's incredibly frustrating.

  • Repairing Permissions is a real joke!!!

    I thought Leopard was suppose to be better, faster. What's with the 10 minute wait for Repair Permissions to do what it's suppose to.
    I can't be the only one seeing this!!!

    Tiger has support for ACL's but they are off by default, and the system doesn't use them for anything, so for the most part the standard UNIX permissions are all that are used. Leopard on the other hand, has ACL's enabled, and most of the system folders have extended permissions (usually just a deny delete), so more things need to be checked. Repairing permissions now involves checking for an ACL in addition to the standard permissions, testing against the receipt and .bom files in the Receipts folder, and possibly repairing both. Using the "Apply to enclosed items" on a system folder can also have the unexpected side effect of creating a bunch of ACL's that the system is not expecting, so things can get pretty busy.
    Repairing permissions isn't some kind of magic bullet that fixes everything, although sometimes it is hard to tell from some of the posts around here. You shouldn't have to use the repair permissions utility at all, unless there is some kind of problem with them - most just use it for system updates.

  • Repairing permissions not repairing

    I just installed a new 8-core Mac Pro, fresh install of Leopard, plus iLife 09 and a ton of my software.
    Am finding this quirk: I repair permissions, and a bunch of "permissions differ" messages come up (most pertaining to Front Row, BackRow, iPhoto Access, and iWork) but if I run it twice in a row, those permissions don't get fixed. I thought Repair Permissions now permanently fixes all permissions (unlike older Mac OS's in which sometimes permissions wouldn't get fixed).
    Problem?

    David Das wrote:
    I just installed a new 8-core Mac Pro, fresh install of Leopard, plus iLife 09 and a ton of my software.
    Am finding this quirk: I repair permissions, and a bunch of "permissions differ" messages come up (most pertaining to Front Row, BackRow, iPhoto Access, and iWork) but if I run it twice in a row, those permissions don't get fixed. I thought Repair Permissions now permanently fixes all permissions (unlike older Mac OS's in which sometimes permissions wouldn't get fixed).
    Problem?
    Have you really searched these boards for identical issues before posting?
    On the right side of this forum is a small window marked "Search Discussions"
    It's very hand and obviates repetitive posts.
    The answer to your question is no.

  • Can't update, can't repair permissions, what to do next?

    Im using an iBook G4. Anyway, tried to update to 10.4.6 yesterday, the process stalled. Rebooting took a very long time. When I open system updater, the process hangs up about 1/4 of the blue bar across. I didn't know to repair permissions before starting, so I tried to do that later. Disk utility does not run properly, so I cannot repair permissions now. I get an error message about a background process.
    The computer seems to work now, but what is my next move? Thanks.

    Vipir,
    Neither you nor I can really guess Apple's policy on the matter. You are welcome to submit it as feedback here:
    http://www.apple.com/macosx/feedback/
    or call AppleCare on it and offer it as a suggestion.

  • Repairing permissions takes forever

    Takes a minimum of 40 minutes...usually about an hour. I would really like to fix this, main reason being that my SuperDuper backups are taking a lot more time than they should. Problem is on both of my machines.
    I am familiar with the kb article referencing permissions that you can safely ignore and this large discussion thread:
    http://discussions.apple.com/thread.jspa?threadID=2106528&start=0&tstart=0
    Does installing the 10.5.8 combo update twice fix this? Can it be done at this late date? I see that Safari 4.0.2 was part of the install, I am now running Safari 5.0.2.
    Any other work around to correct this nuisance?

    Hi...
    Make sure there's enough free space on the disk.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 10% to 15% free disk space at all times.
    Not enough free space can slow a drive down and may slow down repairing permissions as well. Try not to use any other apps at the same time. That may make a difference.
    Carolyn

Maybe you are looking for