Repeat subform until the end of the page

Hi there,
I'm relatively new to Livecycle and scripting, and I have a question that can hopefully be answered. I have a form in which the content is set to flowed and includes expandable fields. The last printable object in my form is a repeatable subform called ChainOfCustody. It's presence is set to hidden until the user clicks Print. It then becomes visible on the prePrint event. I'd like to have ChainOfCustody repeat as many times as it takes to fill the page it's on regardless of whether it appears 1 time or 10 times. I thought I could use addInstance inside a While loop and test when it's no longer on the current page, but that didn't work. I'm running out of ideas at this point, so any help is appreciated. (Below is my form's hierarchy, if that helps.)

You can achieve this by using master pages and pagination.
The implementation will be determined by your form requirements. The simple example attached is an example with two body pages:
- sPageBody
- sPageLast
Regardless of how many pages the sPageBody flows over (by clicking the 'Add Section' button) and whether the sHideShow subform is hidden or visible, the sLastPageFooter always displays at the end of the last page.
Ben Walsh
www.avoka.com

Similar Messages

Subform at the end of the last page

How do I get a subform that is always at the end of the last page?

You can achieve this by using master pages and pagination.
The implementation will be determined by your form requirements. The simple example attached is an example with two body pages:
- sPageBody
- sPageLast
Regardless of how many pages the sPageBody flows over (by clicking the 'Add Section' button) and whether the sHideShow subform is hidden or visible, the sLastPageFooter always displays at the end of the last page.
Ben Walsh
www.avoka.com

Audio in a sequence falls silent right until the end of the sequence

Hmmm, ok, maybe I am completely clueless.... Anyway: I am making a video with 3 dv-clips that I imported previously. When I drag the clips from the browser into the timeline and render them, everything is ok and plays well. Then, after a little editing, i.e. cutting the sequences into smaller pieces, but leaving everything in the same sequence in the timeline, at some point parts from a sequence right to the end of it, fall silent. I can still see the audio in the viewer, but the audio meter itself shows zero audio and I can't hear anything anymore over the speakers. This goes right to the end of the sequence, the next sequence again starts with sound but also falls silent after a while, right until its end. Only the last sequence retains its sound right to the end. The silence starts at some point within a clip of a sequence, but there is no correlation to the marks of the sequence.
I have not (knowingly) done any audio editing, although I am working on a German keyboard and my menus show some odd commands, e.g. Cmd-Y for Undo because of this (the German keyboard goes QWERTZ and YXCV, so Y and Z exchange places) and I am still hitting Cmd-Z when I want to undo stuff, but Cmd-Z itself does not seem to have any function.
So, it looks like I am simply inadvertently giving FCX the command to shut up from a certain point in my clip onward right to the end, without actually silencing the data, since it is still visible in the viewer. I am stumped.
I had this happening to me a couple of times and the last time my only (desperate) remedy was to delete all the clips in the timeline, drag the originals back from the browser into the timeline, render again etc. etc. Well, rendering takes about 3 hours, so I'd rather prefer learning what the heck is the stupid thing I'm doing wrong. Any suggestions, anybody?

Well, not silly, just desperate;-) I tried a similar workaround. First I re-copied the two clips concerned into the sequence, cut them into pieces (it was a video of a concert, so I cut right after every song) and rendered the pieces separately. All went well, except for the last one, at which FCX had run out of memory again (how much does this s...er use anyway? I have 1.25 gigs of RAM, 4 gigs free on my boot partition and 20 gigs free on the document partition with the video; and NOTHING ELSE running). Anyway, repeating the render for the remaining clip was eventually no big deal either.
I saved after every step, so I would know, when something went wrong, but nothing did.
So, right now it runs oK, but leaves a somewhat stale feeling in my mouth, since I prefer knowing where the problems come from. My guess would be either a memory-related issue, or that, due to this strange shift in key commands owed to my German keyboard, I hit the wrong keys a couple of times and those did something elaborately strange to my audio tracks. Well, when it comes up again and I can catch the culprit, I will let you know. Thanx for your input for now;-)

How do i get a new tab to open up with my home page after i click on the + at the end of the tab

how do i get a new tab to open up with my home page after i click on the + at the end of the tab

problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

How to add footer at the end of every page

Hi,
I need to add some text at the bottom of every page in my application. I have made a footer region where i have put that text component. I have simply included that footer region as the last element of every jspx page. This shows the footer at the end of the content and not at the end of page(which is required).
Using css like position:absolute;bottom:0px; shows the text at the bottom of bowser window, not page(so, problem for pages having scoll).
It is not feasible to make any changes in each jspx page. So, what is the way out to achieve this by keeping the change limited to pagefooter region page and/or ss.css
Note: I am using Jdev10.1.3

With JDev 11g, you can create pageTemplate however, in 10g though support for page template is not available, you can achieve basic functionalities like this through web template. See sample here:
http://www.developer.com/db/article.php/3513706/Easy-Web-Templates-with-Oracle-JDeveloper-10g.htm
And if incase you use JHeadstart tool for development, JHeadstart provides templating facilities too.
If you want to achieve using CSS, check this example:
http://www.electrictoolbox.com/html-css-footer/
regards,
~K

How to find end of the Page in Crystal ? or I need to add one Horizontal line at the end of the page.--- URGENT HELP NEEDED

Hi friends,
I need to add one horizontal line for the detail section at the end of the page.
I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
Is there any feature to find end of the Page.
I want report format like this.
set id | set name | date Name
1         x           dddd   vijay
                        dddd   sarathi
                        dddd    reddy
(End of the page)
Thanks in advance...
vijay.

Do you know how many detail records are showing up per page?
If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

How do I force Pages to open a document at the END of the document?

I have a document -- my personal diary -- in which I write almost every day. Every time I open it, it opens about 3/4 of the way into the document, then I have to go to the end of the document to write more. Is there any way to change this weird behavior so the document opens to the end?
I searched discussions and there is an archived discussion of this issue from 2008 where someone points out that if you manually go back to page 1 in the document, then use the Save command, the document will open to page 1 when next opened. However, I can't find any method to have the document open to the end, which seems like it should be an obvious option. I just find it strange that the document does not re-open to the last saved position, especially text documents.
Any workaround?
Thanks in advance.
pd

Well, that was my problem. I was opening an "old" Pages document (updated to 09 of course, but originally it was an 06 document). I would write some additional material at the end and save. But next time I opened the doc it would open to a spot about 3/4 of the way through, not at the end. As I mentioned, I found another discussion in here from a few years back started by someone with the same problem.
Cutting and pasting is really pretty simple (actually I should say copying and pasting in this case): Open old doc, select all, copy, open new doc, paste, save with new name. That worked and now the new document opens to the end. Much more convenient.
pd

When i open a new tab i want the cursor to be at the beginning of the url (it was until this latest update, now the cursor is at the end of the url)

I have just taken the latest update to 22.0 from the last version.
In the past when i opened up a new tab the cursor would jump to the beginning of the URL and i could start typing. Now the cursor goes to the back of the URL and i have to double click the URL to type in a new one.
Let me try to be as clear as i can. I have had firebox set for long time so when i open a new tab google.com comes up, and google is also my home page.
I have not installed any options for a long time either. And nothing that has to do with tabs.
What i remember is as i opened a new tab the URL of it would turn blue and i could start typing in a new URL. Now when i open a new tab i see google.com come up in blue, then the url turns to https://www.google.com/ and the blue goes away and the cursor is at the end of the URL. I now have to double click the URL to type.

I switched to the "about blank" and then use my home icon to get to Google.com
It is not quit as good as it was but usable.
I think you should add two new check boxes in options under "tabs"
1 - When opening any new tab, put the focus of the cursor on the URL.
2 - When opening any new tab, put the focus of the cursor on the search box.
This will take care of the majority of people.

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/

When I try to launch an adobe application I am prompted to renew my creative cloud subscription even though I'm paid up until the end of the year.

When I try to launch an adobe application I am prompted to renew my creative cloud subscription... even though I'm pre-paid up until the end of the year. I can't use any of my applications at the moment.

Another update: The one month free trial software is no longer working for me as a work-around.
Also: I tried to open up my Adobe applications from two other machines that I have in the house, but it did not work. I received the same subscription renewal popup loop. This leads me to the conclusion that it is strictly an issue on the Adobe Licensing Server side, and NOT a localized issue with something wrong on my system.

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

BSP adds CR/LF marker at the end of the page even with compression options

Hello!
I'm creating normal BSP Page with Flow Logic and setting the contents myself:
<%@page language="abap" %><%
response->set_cdata( '-=-' ).
%>
The problem is that WebAS somehow always adds a CR/LF (new line) marker at the end of the page (even if I set compression option to "Remove leading and trailing spaces"). I also tried to set different mime-types.
On the other side there is a BSP Application it00 (described here http://help.sap.com/saphelp_nw04/helpdata/en/eb/8c683c8de8a969e10000000a114084/content.htm ) that shows the uploaded file right.
So I was trying to include that 'solution' setting OnInputProcessing event to this
*         set response data to be the file content
          runtime->server->response->set_cdata( '!=!' ).
*         set the mime-type and file size in the response
          runtime->server->response->set_header_field(
            name = 'Content-Type'
            value = 'text/plain' ).
          runtime->server->response->set_header_field(
            name = 'Content-Length'
            value = '3' ).
          navigation->response_complete( ).
But nothing happens at all.
Please, help me getting rid of these two annoying bytes ('CR/LF') at the end of page.

Thank you, Cornelia!
It works now.
The following code is "must have"
navigation->response_complete( ).

I can not save a bookmark to a subfolder any longer. when I select "Bookmark this page" the subwindow for where to save the link does not open. It just saves all bookmarks to the end of the bookmark listing.

I am running 3.6.13
The bookmarks toolbar will not open the folders. It just saves the current page at the end of the the bookmarks list.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.5.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

How to exit the session at the end of the current page

hi gurus,
i want to exit the session at the end of the current page, so that when i am trying to open some other page in the same browser it should ask for login id & pwd and should not pick the previous session-id.
Regards,
srikar

Look at the below links, it might help you..
[Link1|Re: Navigation with a new session]
[Link2|how to end a session in bsp ?]
Raja

Repeat subform until the end of the page

Similar Messages

Maybe you are looking for