Subform at the end of the last page

How do I get a subform that is always at the end of the last page?

You can achieve this by using master pages and pagination.
The implementation will be determined by your form requirements. The simple example attached is an example with two body pages:
- sPageBody
- sPageLast
Regardless of how many pages the sPageBody flows over (by clicking the 'Add Section' button) and whether the sHideShow subform is hidden or visible, the sLastPageFooter always displays at the end of the last page.
Ben Walsh
www.avoka.com

Similar Messages

Repeat subform until the end of the page

Hi there,
I'm relatively new to Livecycle and scripting, and I have a question that can hopefully be answered. I have a form in which the content is set to flowed and includes expandable fields. The last printable object in my form is a repeatable subform called ChainOfCustody. It's presence is set to hidden until the user clicks Print. It then becomes visible on the prePrint event. I'd like to have ChainOfCustody repeat as many times as it takes to fill the page it's on regardless of whether it appears 1 time or 10 times. I thought I could use addInstance inside a While loop and test when it's no longer on the current page, but that didn't work. I'm running out of ideas at this point, so any help is appreciated. (Below is my form's hierarchy, if that helps.)

You can achieve this by using master pages and pagination.
The implementation will be determined by your form requirements. The simple example attached is an example with two body pages:
- sPageBody
- sPageLast
Regardless of how many pages the sPageBody flows over (by clicking the 'Add Section' button) and whether the sHideShow subform is hidden or visible, the sLastPageFooter always displays at the end of the last page.
Ben Walsh
www.avoka.com

How to Add barcodes at the end of a 3 page form to capture data

I am working on a multiple pages form that contain a paper form barcode I decide to put all paper form barcodes in the last page. How do I get the data fields to be assigned to different barcodes at the end of the page.
How do I remove the red x on the barcode.
I calculate that my form will have approx 2000-3000 chacracters how many barcodes will I need to put
I am using Designer 7
George Ward

With Designer 7.x you will have to wrap each of the data sets on each of the pages in a subform and then with each of your barcodes, select the subform that you would like to collect data from.
Your life would be made much easier if you upgraded to Designer 8.x as you could create "collections" and then associate those collections to each of your barcodes.
With 3,000 characters of data you would more than likely be looking at 3 separate barcodes. The capacity does depend on the type of data your capturing but you should be covered with 3.
Lee

How to find end of the Page in Crystal ? or I need to add one Horizontal line at the end of the page.--- URGENT HELP NEEDED

Hi friends,
I need to add one horizontal line for the detail section at the end of the page.
I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
Is there any feature to find end of the Page.
I want report format like this.
set id | set name | date Name
1         x           dddd   vijay
                        dddd   sarathi
                        dddd    reddy
(End of the page)
Thanks in advance...
vijay.

Do you know how many detail records are showing up per page?
If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.

How do I force Pages to open a document at the END of the document?

I have a document -- my personal diary -- in which I write almost every day. Every time I open it, it opens about 3/4 of the way into the document, then I have to go to the end of the document to write more. Is there any way to change this weird behavior so the document opens to the end?
I searched discussions and there is an archived discussion of this issue from 2008 where someone points out that if you manually go back to page 1 in the document, then use the Save command, the document will open to page 1 when next opened. However, I can't find any method to have the document open to the end, which seems like it should be an obvious option. I just find it strange that the document does not re-open to the last saved position, especially text documents.
Any workaround?
Thanks in advance.
pd

Well, that was my problem. I was opening an "old" Pages document (updated to 09 of course, but originally it was an 06 document). I would write some additional material at the end and save. But next time I opened the doc it would open to a spot about 3/4 of the way through, not at the end. As I mentioned, I found another discussion in here from a few years back started by someone with the same problem.
Cutting and pasting is really pretty simple (actually I should say copying and pasting in this case): Open old doc, select all, copy, open new doc, paste, save with new name. That worked and now the new document opens to the end. Much more convenient.
pd

The + sign at the end of the tabs no longer takes me to the last current tabs or websites it instead takes me to google search. How do i get it back to my last tab for the website I visited?

I used to get the last websites or my frequent websites I visited when I clicked on the + sign at the end of the tab bar.. Now all I get is a google search page.. How do i get it back to the other way it was?

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Do or did you have the Google Toolbar installed?
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites

Need to add a new page in the SAP Script as last page

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E           ENDPAGE
/:           NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ENDPAGE'
    EXCEPTIONS
      element = 1
      window = 2.
Thanks,
Ravi.

Need to place the window only in last page in script

Hi,
I want to place the footer window only in the last page.If it has 2 pages the footer window shhould come in second page only if there is only 1 page then it should come in the first page.
can anyone tell me how to do this in Script.

HI Camila,
In such a case, donot use the footer of the Table , but create another window-FOOTER which is positioned after your table, with such a design, your footer would alwyas come only at the end of the Table.
This is a simpler approach.
The other approach could be to set Conditions in the condition tab of the footer , such as it comes only on the last page.
If you take my suggestion, i would say use the 1st option i have explained.
This will help you.

How do I make the "Open new tab" button positioned at the end of the tab strip, on the right, next to the last open tab, just as the standard Firefox should be.

My "Open a new tab" button (the +) does not appear at the end of the tab strip, it does not look like it is given in all photos here in the support page. It did not look like this before either. Now I have it at the most left end i.e. before the tabs begin. I can move it to the most right, but it sticks there. I want it to be attached to the last open tab, as it used to be, and as is shown in example Firefox photos.
Could be useful if I sent you a print screen, but I don't see an attachment option here.
Thanks!

See https://bugzilla.mozilla.org/show_bug.cgi?id=574833 - Installing Persona theme completely covers the caption buttons

Footer must print at the end of the page

Hi everyone,
I have requirement in smartforms for Purchase Orde that the footer must be printed at the end of the last page irrespective of the number of items. Please help me
Thanks

Hi,
You have two options as suggested by all above, either go for footer in the main window with condition 'at end of table', which will print your footer at last page as soon as your table ends. this way your footer will come to the last page but will not be fixed at a position.
to fix the position of you footer at the bottom, create a separate footer window. but then you need to knw the amount of data coming on the last page, else your footer and main window content will overlap. to avoid the overlapping - you will have to count the number of line getting printed per page, this way you can know that on the last page if you have sufficient space(no. of lines) available to print the footer or not. You can check for thses conditions to suffice and get your footer printed on the last page or additional new page without overlapping.
Thanks.

Libreoffice right-click context menu going beyond the end of the page

having a rather annoying issue with libreoffice 3.x (started with 3.5.x and still in 3.6.1): The right-click context menu goes over the screen borders when I am at the end of the page (instead of opening in the other direction so that all options are visible). I am running arch 64bit KDE 4.9.1. But I think in this case that's not relevant because we have a second computer, the same one basically with an extremely similar setup and there it works just fine. I did uninstall libreoffice, got rid of the .cache in the home folder, then reinstalled but the problem persists.
Anyone know how to fix this or hints on how to approach the problem?
Thx!
Captn

Update:
the problem was fixed with an update to KDE 4.9.2 but shortly after for some reason, it reappeared. As previously mentioned, I tried uninstalling libreoffice entirely, including the libreoffice .config folder. Here is what it looks like (second screen shot):
I noticed that this also happens with dolphin when I open it as root. Someone came across the same issue and fixed it?
Help's greatly appreciated
Captn
Edit: libreoffice version 3.6.1
Edit 2: Real Problem identified:
I just wanted to update this thread should there be others that, at one point or another, run into a similar problem. I won't be marking the thread as solved since I did not actually solve the problem (yet). However, I did identify the cause and therefore know how to circumvent it.
Since I didn't elaborate much on the specs / technical side, I have an HP pavilion with an Nvidia card and I am using the propretiary drivers. I set up a separate X screen for my TV and there is where the problem lies. It has worked for months but since recently this setup causes some weird graphical behavior (as in the above pictures) which can be annoying. If using the twinview setup or no external monitor, everything works normal. My guess is that plasma-desktop and the separate x screen don't work very well together for a reason unknown to me for the time being.
The problem itself can be annoying if you rely on libreoffice to work so I hope this might help somebody should there be annyone running into a similar issue.
Last edited by capthilts (2012-10-13 06:02:32)

How do i get a new tab to open up with my home page after i click on the + at the end of the tab

how do i get a new tab to open up with my home page after i click on the + at the end of the tab

problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

I upgraded my iPhone last night but at the end of the upgrade the Contacts were synched. This has replaced my iPhone contacts with my Windows contacts. Is there a way to restore my iPhone contacts?

I upgraded my iPhone last night. At the end of the upgrade iTunes synched the Contacts, but all my iPhone contacts have been deleted and replaced by the Windows contacts on my computer. Can the iPhone contacts be restored? The latest backup shows the time to be after the sync so we tried to restore the iPhone but only the Windows contact list is there. Can you access any previous backup files anywhere?

Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/

Subform at the end of the last page

Similar Messages

Maybe you are looking for