Replace drive with SSD

Hi All
I have a late 2008 Aluminium macbook. I was wondering about replacing the current har drive with an ssd drive. I know I should get fatser boot time etc but does anyone know what sort of extra battery life I would get by using 1.
Thanks

I haven't noticed a difference in battery life from when I upgraded from an HDD to a SSD.

Similar Messages

  • I have a Mac book pro with regular drive, I want to replace the drive with SSD, so can I do t for Mac book pro purchased in 2012 and which SSD is recommended. I am looking for 500 to 700GB SSD.

    I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
    I am looking for 500 to 700GB SSD.
    Thanks

    Upgrading your MacBook Pro with a Solid State Drive...
    ...call back with any questions.
    Clinton

  • Z41-70 | Replacing DVD with SSD

    Hey , I want to order the Lenovo Z41-70 in the next few days.I read in the internet that I have an option Replacing DVD drive with SSD.Anyone can confirm it? if its possible which Caddy I have to buy? Thanks !

    I'm using dv3533tx with Corsair 180GB SSD.
    First, I try to run restore disk which i create with system restore, It happens same trouble!!
    Second, I try to run restore disk from recovery media which brought by HP. Originally.
    I success to recovery from DVD to SSD.
    FInally, I success to update Windows 7 using WIndows 7 Home Premium (32bit) upgrade disk.
    Please contact your hp dealer and whether you can get recovery disk ( if optional)

  • Replaced my iMac optical drive with ssd  - now I can't create a bootcamp partition

    I have a late 2009 imac 27". Recently my imac hard drive crashed so I used this opportunity to replace the broken hard drive and also replacethe iMac optical drive with a SSD drive. The idea was to use the ssd drive as my bootcamp partition and boost things up. WRONG IDEA!
    I wasted already 5 hours trying to get bootcamp to install windows 7 onto the ssd using an external optical drive, a USB drive, an internal partition of my new hard drive. I used rEFIt to try and boot from these fine devices - nothing! Once the OS restarts to install Windows 7 it gets stuck either in blank screen or with a message that it requires a bootable device.
    This is one of the most puzzling situation I've seen. Any help will be highly appreciated.
    Thanks,
    Amir

    This is the same problem people have with their MacBook Pro. Some people have had success using rEFIT, but many didn't. The only solution that I found was just installing my opitcal drive back in and installing windows on what ever hardrive you need. Then taking the optical drive back out. I know that sounds like a lot of work, but once your done you will be relieved.

  • Replacing super drive with SSD

    Hi everyone,
    My iMac is getting old (2.8GHz Core 2 Duo).
    I'm thinking to replace a super drive with 240GB SSD (will install OS and Apps). I will still use my internal SATA drive for data and files.
    240GB SSD > OS and Applications
    500GB SATA > all data and files
    I'd like to know if I get significant speed advantage??? Anybody has similar configuration? How is it? Is it worth to do?
    Also I'm thinking to upgrade my MBP same way..
    Thanks!

    Well first off it voids your AppleCare/warranty as a unauthorized change, but if you don't care then most have preferred placing the SSD where the hard drive is and moving the hard drive to where the Superdrive is, placing the Superdrive in a external encloses.
    SSD made to be the boot/OS/applications/bare bone user drive for speed and the hard drive for large storage (as SSD's can wear out)
    You won't be able to boot off the external Superdrive or install Windows from it according to reports I read.
    If you contact Bmer art MacOwnersSupportGroup
    http://macosg.com/
    He has a lot of experience and did it himself so he can teach you how it's done, the best SSD to use, cloning your drive and so forth.
    http://www.mcetech.com/optibay/
    http://www.harddrivebenchmark.net/high_end_drives.html

  • Replacing Mac Mini Hard Drive with SSD, and New ML Install

    I have a mid-2011 Mac Mini, and it has been running very sluggish, even when there are multiple free GB of RAM and the processor is only at 10 to 20% of capacity. I ran TechTool Pro 6 to do a scan of the whole machine, and it didn't detect anything out of the ordinary.
    At this point I am guessing that it's probably a software issue. I have tons of processes running in the background all the time, and have installed hundreds of programs over the last two years, so it could be anything number of things that are somehow messing up Mountain Lion.
    So, I would like to replace the 500GB internal hard drive with a 120GB SSD Drive (Samsung 840 Series), and put a fresh install of Mountain Lion on the SSD, put the 500GB in an external enclosure, and see if that fixes the problem.
    Can someone explain the best way for me to do this, in a step by step list?
    I can figure out how to accomplish each step, I just need some overall guidance as to how I should approach the whole thing.
    Thanks very much!
    Some other notes:
    I have a 3 TB hard drive that I can use to back up everything on the 500 GB hard drive, but I'm assuming that time machine isn't the best way to back everything up, since I won't be able to restore the machine on the 120GB drive that I want to boot from.
    Normally, I would get the internal 500GB down to 100GB of data, and then clone it on the SSD, and make the swap, but I'm assuming that cloning the drive will potentially replicate the source of the slowness, so I'm assuming that isn't the best way to proceed.

    Here is my opinion and steps I would perform.
    Back up your system first.
    Check the iFixit.com site for a guide of how to replace the drive. Review Steps 3 and 4 BEFORE you replace your drive.
    If you have a USB thumb drive with the ML 10.8.3 installer, skip to step 6.
    If you don't have a USB thumb drive with the ML 10.8.3 installer, download the OS X Recovery Disk Assistant and use a 1-4GB thumb drive to create a Recovery HD on the thumb drive you can boot from. Skip to step 6.
    If you have neither of the above, after replacing the drive, restart into Internet Recovery by pressing/holding the Command+Option+R keys. Since you have a mid-2011, Internet Recovery will ONLY allow you to download and install Lion since that's what probably came preinstalled on your system.
    After you replace your drive and you are booted into the OS X Utilities Menu from one of Steps 3-5, select Disk Utility and format your new drive as Mac OS Extended-Journaled with the GUID partition table.
    Go back to the OS X Utilities Menu and select Reinstall Mac OS X.
    After the download and install of OS X you can run through the setup creating your user account (same as you had on you old drive).
    If you were able to install OS X ML, skip to step 11.
    If you installed Lion, you will have to login to the App Store and download/install your purchase of ML.
    Run Software Updates to bring your OS X up to date.
    Now you can restore any data files and apps that will fit onto the new drive from Time Machine. Enter Time Machine and navigate to your last backup to view the /Applications folders and your user folders (e.g Documents, Downloads, Music, etc.).
    For your email, you can open Finder then press the Option key to see your user Library folder in the list. Select it to open it then enter Time Machine again and navigate to your last backup so that your user Library folder is opened in Time Machine. Copy your Mail folder to your Desktop so you can copy it back to your current user Library.
    I think that's it.

  • Replacing optical drive with SSD and HD with new HD

    Hi folks, recently my macbook pro unibody's  (2011) hard drive started encountering some fatal errors.  I've gone through all possible fixes, and it looks like the only option left is to replace the HDD.  As much as this initially bummed me out, I'm a little excited about the prospect now.  I think I would like to go ahead and replace the optical drive with a SSD while I have the computer open to replace the HDD.  This will breathe some serious new life into my macbook pro. 
    My question is, which SSD's and HDD's are compatible with the macbook and which brands do you guys (the community) recommend?  Should I upgrade my ram while I'm in there? How difficult of a job is this?  I am mechanically inclined but I have much more experience working on tractors than electronics.  Thanks for any advice or input you can offer!

    Go to OWC to get the Data Doubler bracket for your model. You can also find HDDs and SSDs there. Be sure to put the SSD where the HDD is located and put the HDD in the optical drive bay. Upgrading RAM is always a good idea. I've done all these in my 2011 MBP. OWC also provides tools needed and online video tutorials.
    For optimum use of this combo only install OS X on the SSD. Install everything else on the HDD. Then follow these instructions for setting it up to have the computer boot from the SSD but use your Home folder that is on the HDD:
    How to use an SSD with your HDD
    If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
    After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
    Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
    When the computer boots up it will now be using the Home folder located on the HDD.
    Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
    Be sure you retain the fully bootable system on your HDD in case you ever need it.
    Be sure to use Trim Enabler 3.3 to activate TRIM on the SSD.

  • Can I replace DVD with SSD drive on Satellite P?

    Hi everyone !
    I would like to know if I can replace DVD by caddy's SSD ?
    If I do it about that, Do I loose my warranty ?
    Thanks.

    I dont know what notebook model you have but in most cases such replacement (ODD ? SSD) would work in case the notebook would support the slim-select bay.
    This was the case in older Tecra and Portege notebooks
    I guess Satellite notebooks dont support such upgrade but this is just an assumption..
    Warranty?
    Well, if you would disasemble the notebook, the warranty will be canceled

  • Replace HDD with SSD for HP ENVY 15t-j000 Quad Edition Notebook PC

    I'd like to buy a HP ENVY 15t-j000 Quad Edition Notebook PC and a HP v300a 120GB SATA Solid State Drive with Upgrade Kit.
    Now the SSD has a 7mm thickness.
    My question is if I can replace the HDD with this SSD? How thick is the HDD bay in the laptop.
    If it's more than 7mm will the SSD move inside it?
    Thanks
    This question was solved.
    View Solution.

    Hi,
    The old HDD on your machine is a bit thicker but with at least 4 screws I don't think new SSD will floating around in the case. I actually put new SSD in one of my laptop (not HP) and no problem BUT I don't move this laptop around. If needed, blue tac may help.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • [MBP - 2008, 4,1] Best way to replace HDD with SSD

    Looking to upgrade my 2008 Macbook pro with a new SDD.
    What is the best way to install a SDD while still saving the data from my HDD?  I've heard it's possible to clone the hard drive, place the info on the SDD, and then boot with it.  I've tried my best googling it, but I can't seem to figure out how I would connect my SSD to my computer while the HDD is still installed?  I don't have an external drive with SATA connections. 
    If I do have to do a clean boot with the SDD (After saving important documents on an external drive), would I need my OSX disks?  It's been a long 4 years with this computer and don't think there is any chance of recovering the OSX boot disks.  Is there a way to download these necessary to do a clean boot?
    Thanks for helping a misguided student trying to speed up his laptop!

    You have two basic options. First is simply replace the HDD with the SSD. Second is to remove the optical drive, move the HDD to the space where the optical drive was (you need a mounting kit for this) and install the SSD where the HDD was installed.
    Visit OWC to see the various options they have that includes the special mounting kit, SSD, and installation tutorials.
    If you go with the first option then you will need an external notebook drive enclosure in which to put the HDD when you replace it with the SSD.
    As for cloning that is done as follows:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Be sure you prep the SSD properly:
    Drive Preparation
    1.  Boot from your old HDD. Open Disk Utility in your Utilities folder.
    2. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    I would also recommend upgrading your OS to Snow Leopard. You will need at least 1 GB of installed RAM for Snow Leopard.

  • Replacement drive with WD Black2

    I am planning on replacing my Macbook pro (15-inch, Early 2011) hard disk with a Western Digital Black 2 drive. Model: WD1001X06XDTL
    Has anyone done this or aware of any compatibility issues?
    Thanks

    I fixed my problem by zeroing data on the drive and going back to the factory state of the drive.  That restored the only visible partition to the 120gb SSD.  I then installed Mavericks, the created a 35gb partition for boot camp.  It was tricky, but I got windows 8.1 to install by creating a 35gb partition with bootcamp, then deleting that partition in disk utilities to create free space.  I was then able to restart my macbook and install windows 8.1 using the usb flash drive that bootcamp created.  Once I installed the bootcamp drivers for windows, bootcamp was setup and I just had to change its preferences to run mavericks on startup.  I just havent been able to get audio to work in this bootcamp installation of windows.  I will keep looking for solutions.
    Now that windows was installed (and I was still in windows), I inserted the usb drive that came with the wd black2 dual drive (or you can just go to the wd support page, look up dual drives - because this is the only one - and ran the installation software for the drive which unlocked the 1tb partition.  It showed up as  one 1tb partion that was formatted in ntfs.  DONE!  I can now confirm that this drive does work in a mid 2012 MacBook Pro.  I did some other things, such as reformatted the 1tb partition to a mac journaled partition, moved my home folder to the 1tb partition, and am now investigating how to make this a fusion drive.  I will have to temporarily move my home file off of the drive when this time comes because the command to create the fusion drive with delete what is on the 1tb partition.  It is possible to create a fusion drive using partitions on drives rather than the whole drives so that you can keep your restore partition.
    all of that being said, i answered your question about how this drive appeared in finder after I got it all set up.  all drives can be read and written from mavericks and windows.  i have 2 partitions on my ssd, one for mavericks and one for windows, and 1 1tb partition that i reformatted from ntfs to mac journaled.  only problem that I have had is getting audio to work with bootcamp windows, but it works in parallels windows. 
    you are considering different drive configurations, and I will give you my 2 cents on that.  i am considering returning this drive (i have only had it about 2 weeks), in order to get a 500gb 2.5" samsung evo 840 or crucial mx100 so that I can be all ssd in my machine, and use external hdds when i need them.  I have plenty of flash drives, external hdds, and a synology diskstation nas with 4tb wd red drives if I need high capacity long term storage for media.  Don't be afraid to move your optical drive out of your machine in favor of another drive, but just realize that that bay may only support 3gb/s instead of 6gb/s that you can get from your primary drive space.  large capacity ssds are affordable.  this drive was $185 on amazon when i got it (120gb ssd + 1tb hdd), but a 500gb samsung evo 2.5" sata3 ssd goes for 240.  you can even get msata of the same size for about the same price, and can get an adapter (about $65) that will let you put 2 of them into a single 2.5" bay.  apple uses msata in the macbook air, the only difference is that apple uses a special shape of the ssd (the connecting pins still match those of other manufacturers) in combination with its soldered in ram to keep people from changing things inside the machines.  msata ssds and ssds in general may be the wave of the future, and i dont know if i can justify using a hdd when i can have a ssd for about the same price.  Modern ssds, especially those from samsung and crucial, have good reputations and seem to be quite durable.
    thanks for your question because i think writing this has helped me decide to return this drive and get a 500gb samsung ssd.

  • Swapped drive with SSD, now have to use option key to boot

    I recently replaced my HD in my Macbook Pro with an SSD.  I used SuperDuper to create an image to an external USB drive that I had.  I then removed the stock HD from the Macbook Pro, replaced it with the SSD, booted with the Lion install disc and went into disk utility, created a partition (Journaled, guid) and restored my SuperDuper image to it.  Now, every time I reboot my MBP, it sits at the gray screen (no apple logo) for quite a while, then finally the apple will pop up and it will boot, although quite slowly.  If I hold down the option key when I reboot, the option comes up right away for the SSD, I click it and it's very fast to boot.  Once in the OS, the speed is awesome and no problems.  I also used Onyx to check the startup volume, repair permissions, etc and everything went off without a hitch.  No errors and according to that my startup volume is OK.  Also updated to the latest 10.7.2 patch and that went fine too, although I had to use the option key on reboot.
    Does anyone know what I could investigate that could be causing this boot issue.  I'd like it to boot directly into the OS quickly without the option key.  Is there somewhere that I have to specify a new primary boot device or something?

    Go into sys preferences then startup disk and check highlight the SSD and select Reboot.
    You also need to enable TRIM support.

  • Swap optical drive with SSD for 4k video editing?

    I've already swapped the original HD with an SSD 500gb and replaced the optical drive with the original HD as a secondary drive. That has worked nicely for a couple years. But now that I'm doing intense 4k video editing, I want to replace the HD in the optical bay with a 1tb SSD.
    My question to you: Will the SSD perform at the same speed in the optical bay as it would in the main bay as a secondary drive? Or is there a speed limitation on the optical bay periphery and as such it's not worth putting a fast drive in there?
    What alternative options would you suggest for video editing? My late 2011 Macbook Pro 2.5ghz core i7 with 16gb ram stalls when editing 4k footage off a firewire g-raid. I figured an internal SSD would perform faster and as a double benefit make my files portable without need for an external drive.

    I've already swapped the original HD with an SSD 500gb and replaced the optical drive with the original HD as a secondary drive. That has worked nicely for a couple years. But now that I'm doing intense 4k video editing, I want to replace the HD in the optical bay with a 1tb SSD.
    My question to you: Will the SSD perform at the same speed in the optical bay as it would in the main bay as a secondary drive? Or is there a speed limitation on the optical bay periphery and as such it's not worth putting a fast drive in there?
    What alternative options would you suggest for video editing? My late 2011 Macbook Pro 2.5ghz core i7 with 16gb ram stalls when editing 4k footage off a firewire g-raid. I figured an internal SSD would perform faster and as a double benefit make my files portable without need for an external drive.

  • Replacing Drive with a 500 gig 5400 RMP Drive

    I have a 2008 macbook pro with a 200 gig drive. I would like to replace it with a 500 gig 5400 RMP drive.
    Q: Does anyone have any favorites that:
    1 - fit inside correctly (some models are the wrong size)
    2 -DOES NOT have any of the recent drive firmware issues like:
    http://discussions.apple.com/thread.jspa?messageID=9815826&#9815826
    choices : Hitachi - Western digital - toshiba - samsung - seagate(? problems)

    revDAVE:
    As far as I can tell the clicking issue is intermittent. If you get one that clicks, you can it exchanged under warranty.
    The heat issue in 7200 rpm drives is a question people ask before they install a 7200 rpm HDD. (Incidentally, this question was raised about 5400 rpm drives when going from 4200 rpm drives.) I am not aware of any evidence that the 7200 rpm HDD is significantly hotter than 5400 rpm drives, and, as you may know, the perception of heat is often relative to the user. In any case, I would not worry about a heat issue with a 7200 rpm HDD.
    As to which brand to buy, that is a tough call. Be sure that you buy a drive that does not have GForce that will interfere with the MBP's SMS system. Hitachi is usually a safe bet. Seagate makes excellent drives, but some people have complained about issues with the 500 GB HDD. Remember that whatever brand you buy there is a possibility that your drive may be defective. In the final analysis it's your decision.
    cornelius

  • U410 ultrabook: Can I defrag hard drive with SSD cache?

    Hi,
    I would like to know if I can defrag my hard drive with 24G SSD cache. I heard that it would be bad to defrag the SSD part so I would like to defrag the regular hard drive portion only (1TB). I right clicked the drive but I see four drives and can't tell which one I should defrag. It looks like the first c drive is the one, but I am not sure. Any comments would be helpful. Thanks.

    You are right that by default, drives are set to be defragged automatically. But you can also do it manually and when the date of the task is not yet due.
    Re ssd, are there permanent files in that drive? By permanent, I mean data, programs, etc.. Not the temporary files used by runned programs and the system using the caching process.

Maybe you are looking for

  • FBL3N - line item visible both as open item and as cleared item

    Hello, Please can you tell me possible reasons for which I see the same line item in FBL3N as an open item when I check "open items" and as cleared when I check for "cleared items". Thank you ! Daniel N.

  • How do i add a second phone to itunes without merging contacts?, How do i add a second phone to itunes without merging contacts?

    how do i add my husbands phone to my itunes with out merging contacts, and calendars, we want to share music and pic's and backup all his numbers and calendars seperately form mine

  • Activation problem while activating PRODHS

    Dear Experts, I have modified PRODHS structure by adding some more fields.  While activating it is generating warning activation log, saying that there is inconsistencies in some of the other tables and some tables were adjusted and activated.  Rgds,

  • Client Abort Exception

    Hi all , I have a chaching servlet and a compression filter servlet. the compression filter servlet througs up ClientAbortException . what could be the reason. I know that this exception is thrown when the user closes the browser when the responses i

  • Email gateway FOOBAR again ?

    Anyone else come back to a bunch of these from the weekend ? From: Postmaster <[email protected]>   To: me   Date: Sunday 07:15:55 This is a delivery failure notification message indicating that an email you addressed to email address : -- [email pro