Replace FE and APP server in SharePoint 2013 farm
Hello,
We have to replace the front-end web and app server from a SharePoint 2013 farm. The farm only has 1 FE, 1 APP and 1 SQL server. As the FE and APP were wrongly patched and have unsupported software installed there's no way of getting all servers
at same version level and to succesfully run the Product Configuration Wizard. The database server is ok but we have to replace the 2 other servers.
Is there any documented procedure to perform this migration/reinstall?
Thanks!
Martin
for first approach.
1- go to central admin and add all roles you need for the server that will stay
2- log into the server you will remove then run configuration wizard and choose disconnect from farm
you will have now one server, you can clean it up and keep it or later remove it when u have the new one
3- to add new server
https://technet.microsoft.com/en-us/library/cc261752.aspx
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you
Similar Messages
-
Office web apps Server for Sharepoint 2013
Hello,
I used the following article to install office web apps server and hook it up to a test sharepoint server:
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx. The OWAS service was verified as working by loading:
https://owas.companyname.com/hosting/discovery
For the sharepoint configuration phase, the following commands were run on the sharepoint machine:
1) New-SPWOPIBinding -ServerName "owas.companyname.com" -- (owas.companyname.com) is the host name of the owas server)
2) Get-SPWOPIZone
3) Set-SPWOPIZone -zone "external-https"
However, office documents are still launching in the desktop office applications, not in the browser. Any ideas of what else I may need to do?
thanks,
SherazadHi ,
According to your description, my understanding is that you fail to configure Office Web Apps for your SharePoint 2013.
How about run Get-SPWOPIZone? If you can get a result, it says that your SharePoint have connected with Office Web Apps.
Then you can run below command to change the zone to internal-https.
Set-SPWOPIZone -zone "internal-https"
Reference:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
How to calculate when I need multiple WFE and APP servers in SharePoint 2013 ?
Hi,
Please let me know about those factors are involved on the above topic. Share something from the real experience or with examples in details.
Thanks
srabonHi,
NOte: some links although for 2010 but fits for 2013
for the WFE is the RPS Requests per second versus the users
to get the RPS
http://smallcitydesign.com/how-to-get-sharepoint-2010-requests-per-second-rps/
and this excel sheet to get the users versus RPS
http://pcfromdc.blogspot.com/2013/02/determine-max-users-from-requests-per.html
and here you are how to get the number of front ends
http://abhayajoshi.blogspot.com/2014/01/how-to-calculate-number-of-web-front_24.html
for Apps server, it is based on memory and cpu consumption, check those links
http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepoint-2013-resources.aspx
https://technet.microsoft.com/en-us/library/ff758645.aspx
https://technet.microsoft.com/en-us/library/cc262971.aspx
the most important thing after you do you initial capacity planning is capacity mangement, check my wiki article in here
http://social.technet.microsoft.com/wiki/contents/articles/28226.sharepoint-2013-capacity-management.aspx
you can also make load testing using the following:
Visual studio or
https://gallery.technet.microsoft.com/office/PressurePoint-Dragon-for-58648ae4
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you -
Installation - Office Web Apps Server on SharePoint 2013 Foundation - Download missing
Hi all,
I'm trying to download Office Web Apps Server.
As of November 24th, the download was relocated on the Volume Licencing Center (as per this
link ).
Connected to VLCS, I'm trying to find the download from the tree / using filter..... I'm not finding anything.
Was the product renamed / not available at this time ?
ThxAre you aware of the type of subscription needed to download it?
The client I work for is a government department.... I think they have quite a big subscription!
Thx.
Update
I just found a great link to the list of products available thru the Volume Licensing Program
(http://www.microsoft.com/licensing/products/products.aspx#tab=2).
Office Web Apps Server requires an Office 2013 Licence.... We are checking this requirement right now... -
Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?
I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
Is it possible to install both Tabular and Multidimentional to same physical server?
Is it possible that some Power View reports use tabular and others multidimentional?
Could above requirement work in production environment? Anybody tried?
Kenny_IHi Kenny_I,
According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
on the environment.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Using Office Web Apps Server with SharePoint Foundation 2013
I want to know whether I can configure Office Web Apps server to edit Excel documents on a SharePoint Foundation 2013 site.
I came across a TechNet article that states that "When used together with SharePoint Server 2013, Office Web Apps Server provides updated versions of Word Web App, Excel Web App, PowerPoint Web App, and OneNote Web App".
However, later in the same article, it states "If your organization licenses Office 2013 through a Volume Licensing program, you can enable Office Web Apps editing for SharePoint 2013 on-premises" (without mentioning Foundation or Server).Hi Lemesnil,
The Office Web App server should support the Edit licenses for SharePoin Foundation 2013, Office Web App is free to
download, you can also try installing and configuring in a test environment, see more from the below article applied to SharePoint Foundation 2013.
http://support.microsoft.com/kb/2886404/en-us
http://blogs.technet.com/b/speschka/archive/2012/12/31/enabling-licensing-and-editing-for-office-web-apps-in-sharepoint-2013.aspx
Anohter useful article aobut how to license Office Web App server, you can take a look.
http://blogs.technet.com/b/volume-licensing/archive/2013/05/22/how-to-license-office-web-apps-server.aspx
Thanks
Daniel Yang
TechNet Community Support -
We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
Thanksi am no sure about user name and password. i never saw that option.
check this guide:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
thanks for the reply, but in our case the SMTP is a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please? -
Why we need SSL Certificates for configuring App Server in Sharepoint
Hi Support,
We are planning to have a separate server for Apps, while configuring the server its asking for certificate. The main scenario is while configuring server inside the same firewall why we need SSL for configuring.
Could you please let me know the reason why we need SSL for configuring App Server.
Thanks in Advance,
Regards,
PradeepHi Pradeep,
SSL (Secure Sockets Layer) is a transaction security standard that provides encrypted protection between browsers and App Servers. When SSL is enabled for an App Server, browsers communicate with the App
Server by means of an HTTPS connection, which is HTTP over an encrypted Secure Sockets Layer. HTTPS connections are widely used by banks and web vendors for secure transactions over the web.
Secure Sockets Layer is a requirement for web applications that are deployed in scenarios that support server-to-server authentication and app authentication. This is such a scenario. As a prerequisite
for configuring Task Synchronization, the computer that is running SharePoint Server must have SSL configured.
Reference:
http://blogs.technet.com/b/speschka/archive/2012/09/03/planning-the-infrastructure-required-for-the-new-app-model-in-sharepoint-2013.aspx
http://corypeters.net/2013/03/ssl-and-sharepoint-2013/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Deploying Project Server 2013 to an Existing SharePoint 2013 Farm
We recently deployed the following for our new SharePoint 2013 farm:
2 SQL server (alwaysOn config)
2 application servers
2 WFE
1 SQL for Dedicated Search
2 WFE for Dedicated Search
2 Applications Servers for Dedicated Search.
After purchasing a company that uses Project 2013 heavily we are now looking at deploying Project 2013 using our new 2013 SharePoint farm. My question is what is the recommended additional servers that would needed to be deployed to the existing farm?
Thanks,
RicRic,
It really depends on what your current dataset is, and what the load on your SharePoint Server/Project Server. Technically, Project Server can just sit on top of your WFE and App Servers for SharePoint. You do not need a complete separate server group
for Project Server alone, unless there is a special reason to do so.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:
-
Need to Setup Project Server in existing SharePoint 2013 farm
Hi
I have already SharePoint 2013 farm having 4-WFE Servers, 2-Application Servers, 3-dedicated Search Servers, 2-DB servers (Clustering enabled). Now I want to add one more App server having Project Server 2013 in this existing farm environment so Please
check the below steps. Please let me know If I am wrong in the approach.
Need to install PS 2013 on all the WFE, Applications and Search Servers.
Need to Run Sharepoint wizard on all the servers one by one. (Is it mandatory to run wizard on each server or should run only on application servers only)
The project Server service should run only on application servers.
Regards, Pankaj Waghmare - MCTS | ConsultantHello,
Those steps are correct for high level :) One thing you might need to do is after installing Project Server on all the servers is apply the same CU / SP to Project Server as SharePoint (using the Project Server equivalent patch) so Project Server and SharePoint
are patched at the same level. I would do this after installing PS2013 and before you run the wizard on each server.
I would ensure you test this on a non prod farm first and ensure you have a roll back plan in place.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
How to Use Team Foundation Server With SharePoint 2013 For Development
Hi All,
As i am new to team foundation server and i want to use team foundation server for our development. Please give me good startup point.Hi,
If you wanted to integrate Team Foundation Server with SharePoint 2013,
there are two articles for your reference:
http://dumians.wordpress.com/2013/04/01/integrate-team-foundation-server-with-sharepoint-2013/
http://nakedalm.com/integrate-sharepoint-2013-with-team-foundation-server-2013/
By the way, you can also post the question in in Visual Studio Team Foundation Server forums and more experts will assist you.
Team Foundation Server – General http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
More information:
SharePoint Products requirements for Team Foundation Server:
http://msdn.microsoft.com/en-us/library/hh667648.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Is there a way in install a trial version of Project server on a Licensed edition server of sharepoint 2013? Is there anyway around this or do I need to make a new box all trial versions to test this out?
Thanks
James T.FJames,
Yes, it is possible , however I wont recommend to do it. Since, once Project trial period expires you need to uninstall project server which can not be done without uninstalling SharePoint. Unless you are willing to rebuild the farm once your
testing is completed
Hrishi Deshpande
Senior Consultant -
P13N Server and App Server on separate systems - strange ports opened
Hi -
We have a configuration using WebLogic Personalization Server 3.1.1 on one
server and WebLogic Application Server 5.1 w/Service Pack 6 on another
server. What we've seen with our firewall configuration is that it appears
there are high-number random ports opened occasionally from the App Server
to the P13N Server, which d not appear to be related to connection attempts
(ex: port 42100). The only communication that we know should be happening
between the two systems are T3-based JNDI lookups, LDAP lookup/update
requests, and SQL queries. My questions, then, are as follows:
1) In handling JNDI requests, are there any callbacks that can occur between
the two servers in this configuration on a different port?
2) When separating the P13N Server and App Server, are there any "private"
ports opened between the two systems for management? As far as I know, the
App Server should simply view the P13N Server as another client, but the
firewall log would indicate that something is going on related to this.
If anyone has a similar config and can provide some info related to
potentially unseen port connections, please let me know. Thanks in advance!
Andy
[email protected]
Haakon,
I think the BPEL forum is the better source to ask
BPEL
Frank -
How to set ORACLE_HOME for database and apps server in same server
Hi, I have problem here to set ORACLE_HOME in .bash_profile for database and apps server. please help me to set this Oracle Home.
Thanks
-jebatcoIf you mean to have both simultaneosly set on the same OS session, of course that's not possible. But you can configure them on your profile, and choose them when needed. The following is an excerpt from my .bash_profile
export EDITOR=vi
umask 022
alias O='cd ${ORACLE_HOME}'
o10()
{ export ORACLE_SID=db102
export ORACLE_BASE=/home/oracle/base
export ORACLE_HOME=$ORACLE_BASE/OraHome10
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:/bin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin
export TNS_ADMIN=$ORACLE_BASE/OraHome11/network/admin
export PS1='[\u@\h_10 \W]\$ '
o11()
{ export ORACLE_SID=db11
export ORACLE_BASE=/home/oracle/base
export ORACLE_HOME=$ORACLE_BASE/OraHome11
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:/bin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin
export PS1='[\u@\h_11 \W]\$ '
xe()
{ export ORACLE_SID=XE
export ORACLE_BASE=/usr/lib/oracle/xe/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/server
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:/bin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11R6/bin
export TNS_ADMIN=/home/oracle/base/OraHome11/network/admin
export PS1='[\u@\h_XE \W]\$ '
}If I want to set Oracle 10g environment I type "o10" at OS prompt, "o11" for 11g, and so on. -
Integrate Workday and ServiceNow applications with SharePoint 2013 online
Hello, we have to integrate Workday and ServiceNow applications with SharePoint 2013 online and need to display data from these applications
to SharePoint 2013 intranet site.
Any information about the integration of Workday and ServiceNow applications with SharePoint 2013 would be greatly appreciated. Thanks!
Regards,
ShailendraHi Shailendra,
I searched a lot, there seems very few information from internet and internal about this topic, I'm not familiar with Workday and ServiceNow applicaitons, I would recommend you may post in the following community sites(which should be offcial
sites) for a better assistance regarding the integration questions between Workday and ServiceNow and SharePoint Online(O365).
https://community.servicenow.com/thread/174050
https://community.workday.com/
http://community.office365.com/en-us/f/154.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Driver missing - PCIe Data Acquisition and Signal .....
Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro. All the drivers are working (so far) and i haven't encountered many problems. However, there is one thing bugging me: When i go into Device Manager in Windows, and loo
-
Scratches on the bottom of my MacBook Pro
My own carelessness has unfortunately resulted in scratches on the bottom edges of my MacBook Pro. There is also a rather unsightly crack that has appeared from the top right hand corner where the charger connects to the middle section on the bottom
-
Has anyone successfully connected New ATV without HDMI?
There are numerous threads suggesting a variety of methods that MIGHT connect ATV to an older HDTV w/o HDMI but has anyone actually done so successfully? If so, please explain what actually worked. I'm curious because I'm stuck with a Mitsubishi rear
-
Colour is not right in illustrator cmyk pantone cyan and aqua
I am trying to work with colours in illustrator. I have set my colour mode to CMYK. I am trying to create a light aqua colour and just keep getting "out of gamut" errors. I tried using the colour book for Pantone and even entering the number of a
-
I have created a DVD with 19 home movies split over a menu and a sub menu. All appears to work ok in idvd. I then burn it to DVD and when I put it in the DVD player it opens up ok, but when I scroll down the titles and select one it plays a different