Replace Quotes of ocrd's code by space for query execution

Can anybody explain how to Replace Quotes of ocrd's code by space for query execution

Hi Joseph......
You can not modify OCRd Codes one it comes under trasnaction.
But if it is still any transaction less then you can manually replace its code one by one....
Else it is programatically possible......
Regards,
Rahul

Similar Messages

Oracle Error Code and Message for Query Timeout

Hi,
I need to catch the oracle error code and message for query timeout.
I am using Oracle 9i and could not find any relevant error code/message
for query timeout in Oracle Error Messages.
If anyone has encountered such error messages, please let me know the
Oracle Code or Error message.
Thanks & Regards,
Kanjana

Fly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
HTH -- Mark D Powell --

One space changes query execution time significantly. Why?

Hello,
my application works on Oracle DB 10.2. Today it started "hanging" on one a select query, which earlier took 1-2 seconds to execute (I waited for several minutes and then stopped it). The query is executed, using the following code:
PreparedStatement pst = conn.prepareStatement("select ... ? ... ? ... ? ");
pst.setInt(1, ...);
pst.setString(2, ...);
pst.setInt(3, ...);
ResustSet rs = pst.executeQuery();
So, it started hanging on the executeQuery() method call.
I started experimenting and discovered, that any minimal change to the query (for example, adding 1 adjacent space to the space that is already present) has the result, that query executes in 1-2 seconds again! But if I remove this additional unnecessary space - the query hangs again. This was reproduced with both web application and console application. Computing statistics didn't help.
Several hours later without any interference everything became OK - execution time of that query became 1-2 seconds. But for some time the system was, in fact, unavailable. Why could it happen, how 1 space could make such a great difference and how to prevent this situation in the future?

As others already mentioned you might have a problem where for some unknown reason the execution plan changes from fast to bad.
A completely different idea would be to rewrite the statement, maybe it is possible to find a way where you allways get good plans.
For example I'm not sure if the subquery is needed. If it is then better use alias names inside the subquery too.
Suggestion
select distinct vv.vv_id, vv.value, vv.vocabs_voc_id, vv.com, vv.status, vv.code,
            vv.main_vv_id, vt.vocabs_tree_node_id as node_id
            from vocs_values vv left join vt_vv vt
            on vv.vv_id = vt.vocs_values_vv_id
            connect by prior vv.main_vv_id = vv.vv_id
            start with (vv.vocabs_voc_id = ?
                            and upper(vv.value) like ?
                            and vv.status = ? ); When looking in more detail I see that you alread used an alias from the outer query inside the subquery. Is this correct?
I added some other aliases in blue for the subquery to show you the difference.
Problem?
select distinct vv.vv_id, vv.value, vv.vocabs_voc_id, vv.com, vv.status, vv.code,
            vv.main_vv_id, vt.vocabs_tree_node_id as node_id
            from vocs_values vv left join vt_vv vt
            on vv.vv_id = vt.vocs_values_vv_id
            connect by prior vv.main_vv_id = vv.vv_id
            start with vv.vv_id in (select {color:blue}vv2.{color}vv_id
                               from vocs_values {color:blue}vv2{color}
                               where {color:blue}vv2.{color}vocabs_voc_id = ?
                               and upper({color:red}vv.{color}value) like ?
                               and {color:blue}vv2.{color}status = ? );Shouldn't you replace {color:red}vv.{color} with {color:blue}vv2.{color}?
Edited by: Sven W. on Nov 5, 2008 1:21 PM
Edited by: Sven W. on Nov 5, 2008 1:26 PM

Does anyone have the AUTHORIZATION CODE (5 spaces) for PhotoShop CS2?

I cannot get my PhotoShop CS2 to activate - at one time the Adobe support gave me the
5 (JUST FIVE) box numbers for authorization - now they won't give them out....and I bought
my program - I just need to be able to use it again, after having to switch from XP Pro to Win7.
Anyone - help???

All you need to do is download the new non-activation version of CS2 from Adobe
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Install then enter the new serial number provided by Adobe at that link

ABAP code to break furthur Query execution

Hello,
I need a simple piece of ABAP code for the following purpose. When I run my query, I get the variable input pop-up. Incase I dont enter any values for the variables, the ABAP code should break furthur execution of the query. Is this possible and how??
Pls Help.
Thanks,SD

Hi,
The following code will help you, there is one variable ZVAR, it is user input variable on 0CALDAY, if user won't give any input it will take System date else it will process user input Date.
Note: Write this code at the end of the ENDCASE. i.e. below
IF i_step = 3.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZVAR'.
          CLEAR: l_s_range.
     IF loc_var_range-low EQ '' or
        loc_var_range-high EQ ''
           l_s_range-low = sy-datum.
           l_s_range-high = sy-datum.
        l_s_range-sign = 'I'.
           l_s_range-opt = 'BT'.
           APPEND l_s_range TO e_t_range.
        ELSE.
           l_s_range-low = loc_var_range-low.
        l_s_range-high = loc_var_range-high.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'BT'.
        ENDIF.
ENDIF.
Thanks
Reddy

Postal code a space must replace 5'

Hi ,
Iam creating vendor in foreign country and entered 7 digit postal code 1675129..then
Iam getting error 'In postal code a space must replace 5'
Thnks
jabeen

Hi,
Check the settings for the country you are maintaining the following path -
SPRO>>SAP NetWeaver>>General Settings>>Set Countries>>Set Country-Specific Checks.
In this check for the country what settings have been maintained for postal code. Also do a F1 to see the help on the checking rule field.
Hope this helps.
Thanks and Regards,
Anit

Pasting smart quotes and apostrophes in code view.

Sine upgrading to Dreamweaver CS5, I haven't been able to copy/paste smart quotes and apostrophes into code view without them automatically being converted to straight quotes.
For example, the following sentence (notice the curly quotes):
John’s new song is called “DW Blues”
would get pasted into Code View as:
John's new song is called "DW Blues"
Notice the smart quotes and apostrophe are replaced with single and double ticks, or "straight quotes." While this seems like a minor detail, it's extremely important to our writers and editors to have them appear on the website exactly as typed.
If I do the same copy/paste in Design View (doc type is XHTML Transitional), it appears as:
John's new song is called "DW Blues"
The characters are still replaced, and the straight quotes are then entity encoded (as expected).
This doesn't happen with other valid UTF-8 characters like ™, ®, —, etc., or with any other code editors I've used, including DW CS3.
Is there a hidden preference somewhere to disable this "feature," or is it just a bug?
Please help!

It's now 4 years since jsparacio posted this, and I just wanted to let everyone know that I had -- and am still having -- the exact same problem with Dreamweaver CS5 (running first under Windows XP, then Windows 7, and now again with Windows 8.1). So it's not just Macs that are affected.
FWIW, I have set my DW CS5 Paste preferences to the 3rd of 4 options available
    1 - Text Only
    2 - Text With Structure
    3 - Text With Structure Plus Basic Formatting
    4 - Text With Structure Plus Full Formatting
in the EDIT > PREFERENCES > Copy/Paste Preferences dialog box.
But the Paste Special command ignores this setting, giving me only the first 2 options from which to choose, with option 2 the default selection for Paste Special operations (options 3 and 4 are grayed out, and can't be selected).
According to David Sawyer McFarland's _Dreamweaver CS5: The Missing Manual_ (O'Reilly Media, 2010), the reason these are grayed out is because I am pasting unformatted ASCII text which I generated in a program editor called "UltraEdit":
    "... Choose EDIT > PASTE SPECIAL to open the Paste Special window. Here, you can choose which of the four techniques you wish to use ... sort of. You're limited to what Dreamweaver can paste. For non-Microsoft Office products, you can use only the first two options--the others are grayed out--whereas you can choose from any of the four with text copied from Word or Excel." (McFarland, p. 81)
Regardless of such restrictions, standard copy-and-paste (CTRL+C followed by CTRL+V) works just fine for me using Dreamweaver CS4 (i.e., I have never needed to use the Paste Special command), but with DW CS5, neither Paste command (CONTROL+V or CTRL+SHIFT+V) works properly with typographic/curly/smart quotes.
All typographic quotes -- ASCII-0146 and ASCII-0147 (double quote marks); plus ASCII-0145 and ASCII-0146 (single quote marks, for quotes within a quote) -- are converted to inch (" is entered in the code) and foot (' is entered in the code) marks when I copy-and-paste text with these characters into Dreamweaver's Design View.
When I copy this same plain ASCII text directly into the code (rather than using Design View), typographic double open & close quotes are converted to the inch (") mark, and typographic single open & close quotes are converted to the foot (') mark.
The beginning of this week, I installed Dreamweaver CS5, ver. 11.0, Build 4909 under Windows 8.1 OS on my new Ultrabook. I was hoping that under Windows 8.1, DW CS5's handling of typographic quotes might improve so that I can actually use this program that I purchased 4 years ago. Alas, no such luck: I continue to have the same problem I had when I first upgraded to Dreamweaver CS5 back in August 2010 (then running under Windows XP on my desktop computer).
Back in August 2020, when I first asked about fixes, I was told to change the Title/Encoding setting of Page Properties to "Western European" -- which I tried, but it didn't work then, and it doesn't work now ... and even if it did, it wouldn't be a proper fix for the problem as I have plenty of good reasons for wanting my HTML page Title/Encoding set to Unicode (UTF-8), not Western European ("charset=iso-8859-1").
The ability to copy-and-paste typographic quotes is such a big deal for me that I chose back in August 2010 to revert to Dreamweaver CS4, which I've been using ever since.
It is *very* frustrating that, 4 years later, I still can't use this program, and shall be reverting to DW CS4, yet again.
I continue to be completely flummoxed by this. Every other program with which I am familiar converts non-typographic quotes to typographic/curly/smart quotes ... never have I seen the process automated in reverse!

Replace quotes?

Hello I'm on Coldfusion 10 and I'm trying to figure out how to replace quotes ("). So far I tried this:
<cfset Session.Artist1 = Replace(Session.Artist1,""",""",'ALL') >
That does nothing, I then tried this:
<cfset Session.Artist1 = Replace(Session.Artist1,"&#34",""",'ALL') >
That errors out CF. I'll get this:
Error Occurred While Processing Request
Invalid construct: Either argument or name is missing.
So is there anything that would work in CF and in SQL for " (quotes)? I having people use the HTML ", but that also shows up in SQL as the coding. I would like it to work in CF and in SQL as just ", but can't figure out how. Any help would be great.
Thanks

I get no such complication. When I run the code
<cfset str='the "thing"'>
<cfset newStr = replace(str, chr(34),""","all")>
<cfoutput>#newStr#</cfoutput>
I get the result
the "thing"
Remember to view the result in the browser's source page.

Fpga disabled code using space on a FPGA

I have a endable/disable diagram for emulation a FIFO during emulation mode. see atached picture.
Does the disabled code use space on an FPGA ( I have not enough space on my 3Mgate FPGA for my program)
I ask this because in some other part of the labview code I had compiling error (in VHDL code) in disabbled laview code.
So it looks like if the disabled code takes space on the FPGA, is this the case?
Frank
Attachments:
FIFO emulation.GIF ‏10 KB

The code in disable structure doesn't take space on the FPGA, I use it often and it works.
But in your case, i guess you should disable the for loop too. Because you have an empty loop that have an auto-index activated, and since this part is not disabled, it takes space on your FPGA.
Hope this helps,
Xavier

How, please, can I get rid of the icons in the bookmarks toolbar so I have space for more bookmark names? Thank you

I try to get as many items as I can in the bookmarks menu toolbar (typically using 3 letter names). F4 adds an icon next to each name - taking up valuable space. How, please, can I get rid of the icons in the bookmarks toolbar so I have space for more bookmark names? Thank you.

If you remove the names then you may have a problem with organizing or searching for bookmarks.<br />
If you do not want to use the extension then you can achieve the same effect with code in userChrome.css<br />
That is what I would do.
Add code to userChrome.css below the @namespace line.
* http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks .toolbarbutton-icon { display:none !important;}
</nowiki></pre>
* http://kb.mozillazine.org/Editing_configuration
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

Creating a "space" for insertables characters in cross references

Is it possible to create a cross reference that has a "space" where text can be inserted later? I am thinking of a reference like "see No. __ in Fig.42 on page 8-3" with __ being the space where the number from the image can be inserted. My idea for a cross reference would be like this:
see No. <$inputChar><$inputChar> in Fig. <$AbsNumExkl> on page <$chapnum>-<$SeiteNum>. The tag <$inputChar> being a space for an insertable character. Is such a thing possible in FrameMaker or is there even a default tag in FrameMaker for such a "space"? I haven't a clue what I should be looking for to find a solution, hence posting my question here.
Any help or ideas would be very mucha ppreciated!
Thanks

Hi Matt,
and thanks first of all for your reply. Indeed I am looking to "call up" a call reference in an image. I have a document where the images have call-outs IN the images (bitmaps). I have only just now started to use FrameMAker 11 and i just stumbled across the Hottspot feature (I am not sure when the Hotspot feature was included) and will delve into that sometime when I have the time.. (harhar), hoping I migt find a work around to meet my needs with that.
Anyhow - for now, my prob is that I wish to make a reference to a call-out number in an image.
The cross refernce is (e.g.) "see No. __, Fig. 42, Page 87".
The Xref I CAN refer to without problem naturally is "Fig. 42, Page 87", but as you can see, I had hoped to be able to "be lazy" and have FM automatically also put down "see No." for me but leaving some space, where it is possible to insert text, meaning to leave a blank of some sorts in the "code" of the cross reference. Theoretically the Xref would be interrupted where text could be inserted (in the example fill in the "__" in my example).
Does makle that a little clearer?
As I had to meet my deadline I did put down my very own individual "No. XYZ" each time before setting the cross reference but it is far from ideal.
On the whole, I find working with images with call-outs is tedious in FrameMaker.- I would absoloutely LOVE a feature where it would be possible to work on different layers.
I have a few ideas I would like to try out and fiddle around with to find a solution for my problem. Unfortunately I am not properly trained on FM itself, I have been through all other DTP tools starting with Quark and PageMaker, Indesign etc. I am HTML-savvy, dabbled with Javascript, php and some XML, but the structured Framemaker is still only an untouched yet intriguing concept.
If any more ideas come your way, or if you have any recommendations for my to may be find work arounds let me know!
Thanks
still slightly
puzzled but 4ever hoping

Display default Group space for users in a Role upon login

Is it possible to configure the role/group space so that the users in that role will see the group space as default page after logging into webcenter.
Scenario:
Group Space : G_SPACE1
Role: W_ROLE1
Uers with W_ROLE1: user1, user2, etc
Requirement:
Whenever users with role W_ROLE1 login to webcenter(http://..../webcenter ),
they should see the group space G_SPACE1.
Note: I am aware that we can access the group space directly with url as http://...../webcenter/spaces/G_SPACE1.
Thanks-
Sachin

Hi,
Not as far as I know. This is something I had a requirement to do but couldn't find a way.
Although PS3 added support to configure the landing page/space for a user, it wasn't a very useful addition in my opinion. It only allows the admin to hard-code a single Space as the default for all users and doesn't work with ELs either.

Pass parameter with blank space for report ver 6

Hi,
I face a problem that i willing to pass the acno where it's value with blank space, for example ' 9' as parameter into my report, and assign it as v_acno. Inside the report query i add a where condition, acno >= :v_acno. When i run the report and pass acno without ' , it do not show any record. But when i run the report and pass acno with ' then able to show the records.
for example the value i key in
with ' = ' 9'
without ' = 9
So how i can solve it by pass the acno without ' but the record still able to show?
thks
Message was edited by:
user569740
Message was edited by:
user569740

Hi Nick,
It occurs because an argument of the DTExec commands must be enclosed in quotation marks if it contains a space. From the dtexe (SSIS Tool): Syntax Rules section of the
dtexec Utility (SSIS Tool) document, we can see:
All options must start with a slash (/) or a minus sign (-). The options that are shown here start with a slash (/), but the minus sign (-) can be substituted.
An argument must be enclosed in quotation marks if it contains a space. If the argument is not enclosed in quotation marks, the argument cannot contain white space.
Doubled quotation marks within quoted strings represent escaped single quotation marks.
Options and arguments are not case-sensitive, except for passwords.
So, you need to make the value of the variable @QUERY_STRING within double quotes in the value of the variable @Cmd or remove the space within the @QUERY_STRING value.
Regards,
Mike Yin
TechNet Community Support

SQL Developer replacement for Query Builder?

Our developers use query builder to quickly develop sql code w/conditions, joins, where clauses, etc. I just installed release 2 of SQL Developer and am trying to figure out if this is a viable replacement for query builder. Is there a graphical "query builder" component as part of SQL Developer?

Barry, I would agree that it should be clean and easy to use. I started using Data Browser 2.0 and migrated to Query Builder 6.0.7.1.0 and while Query Builder is no longer it's own product it's integrated into Reports Developer 10g. The basic layout and operation has been consistent thru the life cycle and I would think you'd keep the "look and feel" consistent with what's currently available. (might simplify integrating it too). My biggest complaint with Query Builder 6.0.7 (se don't use the 10g version) is that it errors when opening a schema with more than 8192 objects. As an E-Business Suite 11.5.10 customer this is an issue for our developers when logging in as the standard APPS user.
So here would be my "wish list"
1. consistent look and feel with "older" versions of Browser/Query Builder
2. removal of 8192 object limitation
3. ability to open older .brw format files
Certainly more improvements would be possible by integrating with SQL Developer and would be welcomed - this wish list is coming from a user who has MANY .brw files in the older 6.0.7 format.

Code Signing Cert for AIR and MSI

If a Code Signing Certificate for AIR is purchased, can that same certificate be used when distributing the package using MSI?
Or does it not matter as long as the AIR app is signed?

No, this was a different problem that created similar symptoms.
I just found out that, since Director 11.5, we can put the Xtras folder inside a projector. I was relying on outdated documentation, both online and in my mind, which said the xtras had to be next to the projector.
Weirdly, putting the Xtras folder inside the Contents folder (inside the bare stub projector) solved the problem I was having: my sound was not functioning after I code signed the xtra that enables sound. Now it works fine.
I also created an error when my projector's INI file set Movie01 to a Director movie in the same folder as the projector. Now I have it instead point to a movie in the Resources folder of the projector. So maybe I will just throw all my movies and supporting files in the Resources folder.
I too am thinking of documenting the process, once I know customers are buying my app and using it successfully. Maybe I'll use screen recording to create a set of YouTube tutorials. That can spare others from this confusion and aggravation, and encourage people to buy the latest version of Director and update their old products. The more money that Adobe earns from Director, the more they will be encouraged to invest in developing Director further.
If Apple will accept apps without receipt validation, that will certainly simplify things. I saw an Apple web page that stated it was mandatory, but that page has been changed. Maybe validation is optional but no longer required.
For details, check this:
https://developer.apple.com/library/mac/releasenotes/General/ValidateAppStoreReceipt/Intro duction.html
but luckily there is source code out there that can be used to handle those technical details.
I'm wondering how you applied your set of icons to your bare stub projector. Did you simply replace the projector.icns file? I created an error when I tried that.

Replace Quotes of ocrd's code by space for query execution

Similar Messages

Maybe you are looking for