Replacement for "AP_CHECK_FORMATS" table in R12

Hi all,
what is the replacement for ap_check_formats in Oracle apps R12.
Is ap_selected_invoice_checks obsoleted in R12? If yes ,what is the replacement for ap_selected_invoice_checks.
Please suggest.

Hi,
You need to have metalink (my oracle support) credentials and a valid CSI to access this.
Metalink can be accessed from here.
https://support.oracle.com
Thanks

Similar Messages

Replacement for Pooled table: M_VMVME

Hi,
Can anyone suggest what is the replacement for the pooled table M_VMVME in ECC 6.0 version.
Thanks,
Sheetal

Sheetal
The replacement for this pooled table is SHP_IDX_GDRC.
Please check out Note: 570991 & 479457 or look at program ZBEY_COMPLETE_INBOUND_DELIVERY.
You may need to replace your cersion of the program with the new one.
Regards
Carl Cavendish-Davies
SAP Technical Manager

Replacement for AR_SALES_TAX in R12?

Any one please tell me the replacement for the table AR_SALES _TAX in R12. I am working on
location_id,start_date, end_date, from_postal_code,to_postal_code,sales_tax_id columns .Any one please suggest the proper placement

Yes, it's still available in R12
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=AR_SALES_TAX&c_owner=AR&c_type=TABLE
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=AR_SALES_TAX&c_owner=APPS&c_type=SYNONYM
http://etrm.oracle.com/pls/et1211d9/etrm_fndnav.show_object?n_appid=222&n_tabid=52548&c_type=TABLE
http://etrm.oracle.com/pls/et1211d9/etrm_fndnav.show_object?n_appid=222&n_tabid=52548&c_type=TABLE
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
Thanks,
Hussein

Replacement to MSEG table

HI,
The fields RSNUM and RSPOS are from the reservation table RESB. Based on these two fields I am fetching MBLNR MJAHR and ZEILE from MSEG table. But the select query is taking a lot of time. Could anyone please give me a replacement for MSEG Table .
Thanks,
Chinmaye

You should avoid reading MSEG if you don't know the document number (MBLNR). Check if you can get to that number in table EKBE via table EKET. See this site for an illustration of how the tables are connected:
http://www.erpgenie.com/sap/abap/tables_mm.htm#Purchasing%20Tables

Need mapping columns for the table ic_whse_inv in R12.

Hi Guys,
We are upgrading to R12, and I need mapping for the following columns in the table ic_whse_inv
to the Tables in R12.
SAFETY_STOCK ,REORDER_POINT ,FIXED_LEADTIME, PURCHASE_IND
Can you guys help me?
Thanks\Kiran S.

Hi,
I have already gonr through the OPM release 12.1 migration documents provided in 376683.1.
The metalink ID1098353.1 is somewhat helpful for me in analyzing the transactions duting upgrade phase. However, I still not able to get the exact replacement for ic_loct_inv in R12. Your assistance is really required and appreciated.
Thanks

Replacement for ic_loct_inv in R12

My client is currently runnning on 11i OPM. They are going for R12 upgrade now. We have lot of reports and PL/SQL programs using ic_loct_inv table in 11i. I would like to know the replacement for ic_loct_inv in R12 Discrete mfg.

Hi,
I have already gonr through the OPM release 12.1 migration documents provided in 376683.1.
The metalink ID1098353.1 is somewhat helpful for me in analyzing the transactions duting upgrade phase. However, I still not able to get the exact replacement for ic_loct_inv in R12. Your assistance is really required and appreciated.
Thanks

Replacement for some cols of the tbl AP_SELECTED_INVOICE_CHECKS_ALL in R12

Hi,
We are in upgrade of 11i to R12 and we are badly in need of the replacement for the below 11i columns of the table AP_SELECTED_INVOICE_CHECKS_ALL in R12
CHECK_VOUCHER_NUM,
ATTENTION_AR_FLAG,
VOID_FLAG,
OK_TO_PAY_FLAG
It would be a great help if someone throws some light on this. I tried in IBY_PAYMENTS_ALL, IBY_PAY_PAYMENTS_ALL, AP_SELECTED_CHECKS but could not find them.
Thanks,
Naresh Mankala

Please see these links.
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
eTRM
https://etrm.oracle.com/
Thanks,
Hussein

Regarding finding the table name for a field in R12 forms

Hi all,
I need to know how to find the table name for a field in R12. I am working on extracting the employee information but i need to know how to get the table names for the fields.
Thank you,
raj

Please see these threads.
How to find table name in ebs
How to find table name in ebs
E-Business tables
E-Business tables
Thanks,
Hussein

Which tables are suitable for advanced compression in R12.1.1 vision db

I want to use advanced compression in our R12.1.1 test env and I want to know which R12 tables are suitable for that?(I want make a script for compressing our VISION DB automatically)
for example, table like GL% and ... ?
some table contain long/long raw data_type ,so if I compress all tables in a tablespace(like APPS_TS_TX_DATA) ,filter long/long raw table will became a time-cosuming job..
thanks

Hi,
for example, table like GL% and ... ?I believe this is no direct answer to your question as this depends on the number/type of records you have in your tables, and this varies from one organization/environment to another. You could calculate the size of the tables and decide which tables need compression by yourself.
some table contain long/long raw data_type ,so if I compress all tables in a tablespace(like APPS_TS_TX_DATA) ,filter long/long raw table will became a time-cosuming job..Please see if these links help.
Early Benchmarks: Using Advanced Compression with Apps 12
http://blogs.oracle.com/stevenChan/2008/11/early_benchmarks_using_advanced_compression_with_ebs.html
Using Advanced Compression with E-Business Suite Databases
http://blogs.oracle.com/stevenChan/2008/10/using_advanced_compression_with_e-business_suite.html
New Whitepaper: Options for Reducing E-Business Suite Database Sizes
http://blogs.oracle.com/stevenChan/2008/12/whitepaper_options_for_reducing_ebs_database_size.html
Regards,
Hussein

Replacement of i_wrap table in oops for FM 'ALVDG_WORD_WRAP' ?

Replacement of i_wrap table in oops?
**This declaration is not allowed in oops?
how to replace i_wrap declaration, occus 0**
**if i convert into types....i am unable to pass in below function module. **
DATa: BEGIN OF I_WRAP OCCURS 0,
          text(60) type c,
           END OF I_WRAP.
     CALL FUNCTION 'ALVDG_WORD_WRAP'
          EXPORTING
            textline                  = w_text1
           DELIMITER                 = ' '
           OUTPUTLEN                 = 35
*         IMPORTING
*           OUT_LINE1                 =
*           OUT_LINE2                 =
*           OUT_LINE3                 =
         TABLES
           OUT_LINES                 = I_WRAP
*         EXCEPTIONS
*           OUTPUTLEN_TOO_LARGE       = 1
*           OTHERS                    = 2
        BREAK-POINT.
        IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
pls suggest.

Hello Anee
Quite simple:
"DATa: BEGIN OF I_WRAP OCCURS 0,
"          text(60) type c,
"           END OF I_WRAP.
TYPES: BEGIN OF ty_s_wrap.
TYPES: text(60) TYPE c.
TYPES: END OF ty_s_wrap.
TYPES: ty_t_wrap TYPE STANDARD TABLE OF ty_s_wrap
                             WITH DEFAULT KEY.
DATA: lt_wrap TYPE ty_t_wrap.
     CALL FUNCTION 'ALVDG_WORD_WRAP'
          EXPORTING
            textline                  = w_text1
           DELIMITER                 = ' '
           OUTPUTLEN                 = 35
*         IMPORTING
*           OUT_LINE1                 =
*           OUT_LINE2                 =
*           OUT_LINE3                 =
         TABLES
           OUT_LINES                 = lt_wrap
*         EXCEPTIONS
*           OUTPUTLEN_TOO_LARGE       = 1
*           OTHERS                    = 2
Regards
Uwe

Joins for PO & RCV tables in R12

Could you provide me joins for below tables
rcv_shipment_headers rsh
rcv_shipment_lines rsl
rcv_transactions rct
po_headers_all poh
po_lines_all pol
Thanks

rsh.shipment_header_id = rsl.shipment_header_id
AND rsl.po_header_id = rct.po_header_id
AND rsl.po_line_id = rct.po_line_id
AND rct.po_header_id = poh.po_header_id
AND rct.po_line_id = pol.po_line_id
AND poh.po_header_id = pol.po_header_id
Thanks,
PS.

Joins for INV tables R12

Hi,
Could you provide joins for below tables:
mtl_system_items_b
mtl_kanban_cards
mtl_onhand_quantities_detail
MTL_SECONDARY_INVENTORIES
MTL_ITEM_CATEGORIES
MTL_CATEGORY_SETS_TL
MTL_CATEGORIES_B
Thanks

Yes it is kind of limitation in obiee. But there are some solutions which might deviate from best practices.
Sol 1. Snowflake the dimensions in Business Model. Rather than merging both of them into single logical table, separate them into two different logical tables.
Sol 2. For the logical table , have two LTSs. First LTS will have both tables and all columns mapped to both tables. Second LTS will have only main table, Columns belong to that table only mapped. In this way when you selected columns related to first source system will use second LTS which has only only one table.
- Madan Thota

Oracle Financials AP 11i tables Vs R12 tables

Hello,
I have a package that works in Oracle Apps 11i instance. This package is using 11i tables in its cursors. we are moving this package to r12 and thus this package has to run in r12 using r12 tables. I have heard that a lot of tables have been changed from 11i to r12 in oracle financials. here is the code.
Some of the tables in the AP that were used in 11i were AP_BANK_ACCOUNTS_ALL, AP_BANK_BRANCHES, AP_CHECKS_ALL,
AP_INV_SELECTION_CRITERIA_ALL,
fnd_lookup_values_vl. I need to know their R12 counterparts or the R12 tables that needs to be inserted here.
SELECT DISTINCT abb.attribute1 attribute1
FROM APPS.ap_bank_accounts_all ABA,
APPS.ap_bank_branches ABB,
XXAP.XXAP_CD_PAYBATCH_APPR_OUT XCOUT,
APPS.AP_INV_SELECTION_CRITERIA_ALL AISC
WHERE aisc.checkrun_id = xcout.batch_id
AND aisc.bank_account_id = aba.bank_account_id
AND aba.bank_branch_id = abb.bank_branch_id
SELECT ABB.ATTRIBUTE1 MESSAGE_ID,
FROM APPS.AP_BANK_ACCOUNTS_ALL ABA,
APPS.AP_BANK_BRANCHES ABB,
APPS.AP_CHECKS_ALL CHK,
APPS.AP_INV_SELECTION_CRITERIA_ALL AISC,
APPS.fnd_lookup_values_vl FLV,
XXAP.XXAP_APP_OUT XCOUT
WHERE ABA.bank_branch_id = ABB.bank_branch_id
AND AISC.bank_account_id = ABA.bank_account_id
AND XCOUT.batch_id = AISC.checkrun_id
AND CHK.checkrun_id = AISC.checkrun_id
AND CHK.PAYMENT_METHOD_LOOKUP_CODE = AISC.PAYMENT_METHOD_LOOKUP_CODE
AND ABA.ATTRIBUTE4 = FLV.LOOKUP_CODE

933951 wrote:
Hello Srini,
Thank your for the reply. Appreciate it.
I have taken a look at the zip file from that Steven Chen blog, but i guess that does not really help me at the moment i guess. It tells us changes have been made but what needs to be replaced with which tables hasnt been mentioned.
I have taken a look at the document "Bank Setups in R12 Question [ID 434195.1]" and it provided me this below information. Is it right if i replace the tables on the left with the tables on the right.
AP_BANK_ACCOUNTS_ALL --> CE_BANK_ACCOUNTS
AP_BANK_ACCOUNTS_USES_ALL --> CE_BANK_ACCT_USES_ALL
AP_BANK_BRANCHES --> CE_BANK_BRANCHES_VCorrect - pl see this MOS Doc
R12 Cash Management 'How To' documents [ID 580516.1]
AP_CHECKS_ALL -- ??
AP_INV_SELECTION_CRITERIA_ALL -- ??These two tables are still valid for R12. Pl see
What are the new tables in R12 for Payables and to what R12 objects are obsoleted 11i tables mapped [ID 1290116.1]
>
Is the above derived information right? Can you please help me in this? Thank you
Also, i have seen a lot of threads with the same requirement, so i guess that should help a lot of other people.
Thank youHTH
Srini

Use of open interface tables in R12

Hello,
Can someone tell me the status of using open interface tables in release 12. Is this still a supported mechanism for importing data into the product, or must you use a PL/SQL/Java API, XML gateway etc?
iREP for 11.5.10 lists these open interface tables, but they are missing from the embedded iREP in R12. However, looking in the database for the RA_CUSTOMERS_INTERFACE_ALL shows that the tables exists. Is it supported to still use open interface tables, or are they just there for legacy upgrade purposes? If it is supported, where is the documentation for these R12 open interface tables?
I wish to integrate into various modules using Oracle Data Integrator and it seems to only have 'integration knowledge modules' to support open interface tables.
i look forward to your response.
Cheers,
John

Hi Helios,
Thanks for your response. Two of the links do not work.
All I really need to know for sure is that R12 supports open interface tables.
Perhaps I didn't use the embedded R12 iRep correctly - the standard view by product family certainly didn't show any open interface table, and they did not appear in the 'interface type' drop down list. However, I notice from an example on the web that you can pivot the results by interface type. I will try that when the environment becomes available again.
cheers,
John

Creating view to get first row for each table !!

I am having tables(more than 10) which are related using foreign key and primary key relationship.
Example:
Table1:
T1Prim T1Col1 T1Col2
Table2
T2For T2Prim T2Col1 T2Col2 T2Col3
(here T2For will have value same as T1Prim and in my design it has same column name i.e. T1Prim)
Table3
T3For T3Prim T3Col1 T3Col2 T3Col3
(here T3For will have value same as T2Prim)
and so on.
The data in the tables is like For table1 there will be one record, for table2 there will be one record and for table 3 there are more than one records.
Can i view either the first record for each of them or all records from each of them by writing the following view.
I have written a view like this:
Create or replace view test (T1Prim,T1Col1, T1Col2,T2Prim,T2Col1 T2Col2, T2Col3, T3Prim,T3Col1, T3Col2, T3Col3)
As
Select
Table1.T1Prim,
Table1.T1Col1,
Table1.T1Col2,
Table2.T2Prim,
Table2.T2Col1,
Table2.T2Col2,
Table2.T2Col3,
Table3.T3Prim,
Table3.T3Col1,
Table3.T3Col2,
Table3.T3Col3
From
Table1,
Table2,
Table3
where
Table1.Prim = Table2.For
and Table2.Prim = Table3.For
When i ran the select statement on the view I am not getting any data. Whereas there is data when select is ran on individual table.
Can someone please tell me where i am goofing.
Thanks in the anticipation that i will get some hint to solve this.
Eagerly waiting for reply.
Thanks !!

I mean use a collection :
Collection Methods
A collection method is a built-in function or procedure that operates on collections and is called using dot notation. The methods EXISTS, COUNT, LIMIT, FIRST, LAST, PRIOR, NEXT, EXTEND, TRIM, and DELETE help generalize code, make collections easier to use, and make your applications easier to maintain.
EXISTS, COUNT, LIMIT, FIRST, LAST, PRIOR, and NEXT are functions, which appear as part of an expression. EXTEND, TRIM, and DELETE are procedures, which appear as a statement. EXISTS, PRIOR, NEXT, TRIM, EXTEND, and DELETE take integer parameters. EXISTS, PRIOR, NEXT, and DELETE can also take VARCHAR2 parameters for associative arrays with string keys. EXTEND and TRIM cannot be used with index-by tables.
For more information, see "Using Collection Methods".
Syntax
Text description of the illustration collection_method_call.gif
Keyword and Parameter Description
collection_name
This identifies an index-by table, nested table, or varray previously declared within the current scope.
COUNT
COUNT returns the number of elements that a collection currently contains, which is useful because the current size of a collection is not always known. You can use COUNT wherever an integer expression is allowed.
For varrays, COUNT always equals LAST. For nested tables, normally, COUNT equals LAST. But, if you delete elements from the middle of a nested table, COUNT is smaller than LAST.
DELETE
This procedure has three forms. DELETE removes all elements from a collection. DELETE(n) removes the nth element from an index-by table or nested table. If n is null, DELETE(n) does nothing. DELETE(m,n) removes all elements in the range m..n from an index-by table or nested table. If m is larger than n or if m or n is null, DELETE(m,n) does nothing.
EXISTS
EXISTS(n) returns TRUE if the nth element in a collection exists. Otherwise, EXISTS(n) returns FALSE. Mainly, you use EXISTS with DELETE to maintain sparse nested tables. You can also use EXISTS to avoid raising an exception when you reference a nonexistent element. When passed an out-of-range subscript, EXISTS returns FALSE instead of raising SUBSCRIPT_OUTSIDE_LIMIT.
EXTEND
This procedure has three forms. EXTEND appends one null element to a collection. EXTEND(n) appends n null elements to a collection. EXTEND(n,i) appends n copies of the ith element to a collection. EXTEND operates on the internal size of a collection. So, if EXTEND encounters deleted elements, it includes them in its tally. You cannot use EXTEND with index-by tables.
FIRST, LAST
FIRST and LAST return the first and last (smallest and largest) subscript values in a collection. The subscript values are usually integers, but can also be strings for associative arrays. If the collection is empty, FIRST and LAST return NULL. If the collection contains only one element, FIRST and LAST return the same subscript value.
For varrays, FIRST always returns 1 and LAST always equals COUNT. For nested tables, normally, LAST equals COUNT. But, if you delete elements from the middle of a nested table, LAST is larger than COUNT.
index
This is an expression that must yield (or convert implicitly to) an integer in most cases, or a string for an associative array declared with string keys.
LIMIT
For nested tables, which have no maximum size, LIMIT returns NULL. For varrays, LIMIT returns the maximum number of elements that a varray can contain (which you must specify in its type definition).
NEXT, PRIOR
PRIOR(n) returns the subscript that precedes index n in a collection. NEXT(n) returns the subscript that succeeds index n. If n has no predecessor, PRIOR(n) returns NULL. Likewise, if n has no successor, NEXT(n) returns NULL.
TRIM
This procedure has two forms. TRIM removes one element from the end of a collection. TRIM(n) removes n elements from the end of a collection. If n is greater than COUNT, TRIM(n) raises SUBSCRIPT_BEYOND_COUNT. You cannot use TRIM with index-by tables.
TRIM operates on the internal size of a collection. So, if TRIM encounters deleted elements, it includes them in its tally.
Usage Notes
You cannot use collection methods in a SQL statement. If you try, you get a compilation error.
Only EXISTS can be applied to atomically null collections. If you apply another method to such collections, PL/SQL raises COLLECTION_IS_NULL.
You can use PRIOR or NEXT to traverse collections indexed by any series of subscripts. For example, you can use PRIOR or NEXT to traverse a nested table from which some elements have been deleted.
EXTEND operates on the internal size of a collection, which includes deleted elements. You cannot use EXTEND to initialize an atomically null collection. Also, if you impose the NOT NULL constraint on a TABLE or VARRAY type, you cannot apply the first two forms of EXTEND to collections of that type.
If an element to be deleted does not exist, DELETE simply skips it; no exception is raised. Varrays are dense, so you cannot delete their individual elements.
PL/SQL keeps placeholders for deleted elements. So, you can replace a deleted element simply by assigning it a new value. However, PL/SQL does not keep placeholders for trimmed elements.
The amount of memory allocated to a nested table can increase or decrease dynamically. As you delete elements, memory is freed page by page. If you delete the entire table, all the memory is freed.
In general, do not depend on the interaction between TRIM and DELETE. It is better to treat nested tables like fixed-size arrays and use only DELETE, or to treat them like stacks and use only TRIM and EXTEND.
Within a subprogram, a collection parameter assumes the properties of the argument bound to it. So, you can apply methods FIRST, LAST, COUNT, and so on to such parameters. For varray parameters, the value of LIMIT is always derived from the parameter type definition, regardless of the parameter mode.
Examples
In the following example, you use NEXT to traverse a nested table from which some elements have been deleted:
i := courses.FIRST; -- get subscript of first element
WHILE i IS NOT NULL LOOP
-- do something with courses(i)
i := courses.NEXT(i); -- get subscript of next element
END LOOP;
In the following example, PL/SQL executes the assignment statement only if element i exists:
IF courses.EXISTS(i) THEN
courses(i) := new_course;
END IF;
The next example shows that you can use FIRST and LAST to specify the lower and upper bounds of a loop range provided each element in that range exists:
FOR i IN courses.FIRST..courses.LAST LOOP ...
In the following example, you delete elements 2 through 5 from a nested table:
courses.DELETE(2, 5);
In the final example, you use LIMIT to determine if you can add 20 more elements to varray projects:
IF (projects.COUNT + 20) < projects.LIMIT THEN
-- add 20 more elements
Related Topics
Collections, Functions, Procedures
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/13_elems7.htm#33054
Joel P�rez

Replacement for "AP_CHECK_FORMATS" table in R12

Similar Messages

Maybe you are looking for