Need mapping columns for the table ic_whse_inv in R12.
Hi Guys,
We are upgrading to R12, and I need mapping for the following columns in the table ic_whse_inv
to the Tables in R12.
SAFETY_STOCK ,REORDER_POINT ,FIXED_LEADTIME, PURCHASE_IND
Can you guys help me?
Thanks\Kiran S.
Hi,
I have already gonr through the OPM release 12.1 migration documents provided in 376683.1.
The metalink ID1098353.1 is somewhat helpful for me in analyzing the transactions duting upgrade phase. However, I still not able to get the exact replacement for ic_loct_inv in R12. Your assistance is really required and appreciated.
Thanks
Similar Messages
-
IDM with SQL server Error: Cannot find columns for the table...
Hi all,
I am Configuring IDM with SQL Server repository and ran into this error.
'Cannot find columns for the table 'object'
.....jdbc...[SQL Server]Invalid object name 'object'
Can anybody please help me!!
GYes, permissions are very important. I ran into a similar problem because I didn't have the correct permissions. Make sure the user has the following permissions:
CREATE ANY TABLE
ALTER ANY TABLE
DROP ANY TABLE
CREATE ANY PROCEDURE
EXECUTE ANY PROCEDURE
DROP ANY PROCEDURE
Also, make sure there is enough space in the default tablespace of that user.
HTH
~Suvesh -
Need Mapping logic for the following scenario
Hi everyone,
I need a mapping logic for the following scenario.
For the same order no with same material no, the quantity should be summed and only one idoc should be created.
For the same order no with different material no, no need to sum the quantity and only one idoc should be created.
For example:
Source Structure:
Ord No Mat No QTY
12 1 2
13 1 3
13 2 1
12 2 4
15 1 5
14 3 7
12 1 6
Target Structure:
Ord No Mat No QTY
12 1 8
12 2 4
13 1 3
13 2 1
14 3 7
15 1 5
Thanks in AdvanceTry the graphical mapping as shown below using concat with a space as delimite and UDF to split the value again by space.
1. Idoc node
(RootContext)
OrdNo
|concat[ ] -> sort[asending] -> SplitByValue -> collapseContexts -> Idoc
MatNo case sensitive [ValueChange]
(RootContext)
2. OrdNo
OrdNo(RC)
|concat[ ] -> sort[asending] ->SplitByValue->collapseContexts->SplitByVale-> UDF to fetch ordno -> OrdNo
MatNo(RC) case sensitive [ValueChange] [eachValue] (return var1.split(" ")[0];)
3. MatNo
OrdNo(RC)
|concat[ ] -> sort[asending] -> SplitByValue ->collapseContexts->SplitByVale-> UDF to fetch ordno -> MatNo
MatNo(RC) case sensitive [ValueChange] [eachValue] (return var1.split(" ")[1];)
4. Qty
[asending,case sensitive]
-- sortByKey -----> formatByExample -> sum ->Qty
OrdNo(RC) | | ^
|concat[ ] -> | Qty(RC) |
MatNo(RC) | |
--sort[asending]-> SplitByValue
case sensitive [ValueChange]
Regards,
Sunil Chandra -
Using Alias for the table column
Dear all,
Can we use alias name for the table column while developing zreport.
ie.,
without using standard table column name ( like mara-matnr ), i wish to use mat_num for matnr. So that, one can easily understand the column.
Could you help me out in this regard.
Thanks in Advance,
S.Sridhar.yes you can declare in ur internal table like
material_number like mara-matnr. -
Vertical scroll bar for the table
Hi,
I have a table which will contain more than 100 rows. First Visible rows will be 10.
i want a vertical scroll bar for the table, so that i can see all the rows using vertical scroll bar. While scrolling down, the header row, which contain names of the column should be static (ie visible even scroll down) and the footer of the table should be visible even goes up.
If I use Scroll container, it will take whole table and the header row, row with name of column will move up invisible when i scroll down. So it is not useful if i use scroll contatiner.
I need a fnctionality were table has a vertical scroll bar to it.
Thanks
MahaHi,
Your requirement is one of the default properties of the Table UI element in NWDS CE version.
Regards,
Alka. -
Exception: non-read-only mapping defined for the primary key field
Hello.
I'm new to Oracle and I created Java EE Web Project.
And I created entities from tableA, tableB, tableC from my database.
tableA has foreign key to tableB and has unidirectional Many-to-One relationship. tableC has two primary keys and one of these is foreign key to primary key in tableA. tableC also has unidirection Many-to-One relationship to tableA.
Then I created session bean and data control from it, in design window, created read-only table from tableA.
And I selected columns in tableA and also in tableB.
I ran the application and saw the following exception in log window.
Local Exception Stack:
Exception [EclipseLink-46] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.DescriptorException
Exception Description: There should be one non-read-only mapping defined for the primary key field [tableC.tableA_ID].
Descriptor: RelationalDescriptor(mypack.tableC --> [DatabaseTable(tableC)])
tableA_ID is a primary key in tableA.
How can I solve this error?
Please help me.
Edited by: 900471 on 2011. 12. 3 오전 5:32
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:34There are not enough details to be sure since you have not provided the mappings. From just the error, it looks like you are using the tableC.tableA_ID field as the foreign key in the ManyToOne relationship to A, but have marked it as insertable=false, writeable=false, meaning that it cannot be updated or used for inserts.
Either make it writable (set the settings to true), or add another basic mapping/attribute in the entity for TableC that maps to the field which you can use to set when you insert a new tableC entity. A simple example is available at
http://wiki.eclipse.org/EclipseLink/Examples/JPA/2.0/DerivedIdentifiers
Best Regards,
Chris -
hi
i have a table and in onLeadSelect()
i have a writen code for creating a modal window
but i need a image in the table for the onLeadSelect()
that is if i click on the image a modal window
gets displayed .
is this possible?Hi Kishore,
For ur requirement u can do this.
In the table have ur first Column with Cell Editor as LinkToAction.And for that link set imageSource property to the image u want to display.
And ensure u have copied the image under the folder src/mimes/Components/<comp package> of ur component
Once u do this an image is diaplayed for first column in ur table
Now Do not bind onLeadSelect of table.instead bind onAction of LinkToAction u created to the event in which the code is written for showing pop up window..
Let me know if it solves ur issue
Rgds,
Santhosh -
How can I findout the coulm value contains 0 through 9 for the table
could u plz suggest me how can I findout the coulm value contains <> 0 through 9 for the table...
Well I am going to give it a shot, because I believe I am looking for the same thing.
I have a value that is of type varchar2. How can I determine if it has special characters or alpha characters in it? In other words, I only want the value to consist of numbers. (Initially it had been thought that Letters would be used as well, but now they just want numbers and the datatype of the column cannot be altered since there is data in it.)
I have gotten this far, but I do not know what else I can use besides '[:alpha:]'? I cannot seem to find this documented anywhere...I can find the regexp package reference, but not the character classes...
select regexp_instr('1a23456', '[[:alpha:]]',1,1,1, 'i') x
from dual
This works fine = returns 3, so I know there is an alpha character.
select regexp_instr('1$23456', '[[:alpha:]]',1,1,1, 'i') x
from dual
This returns 0 - what do I need to change so that it detects the '$' and returns 3?
Thanks!!
Janel -
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
How to look for the Table Name
Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
RegardsHi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar -
How to find out the NULL columns in the table?
Hi,
Please provide the query to find the null columns in the table. Here, all rows in the table have same column as null. It won't change.
Table
c1 c2 c3 c4
X C 10
T D 20
I wanna find out as C2 is the nullable column.
Thanks in advance !!
Regards,
Vissu....Below code might be solution for finding NULL valued in columns in a table and if it is solution .kindly give me points for the same.
declare
cursor col_cur is
select column_name
from user_tab_cols -- all_tables can also be used in case the table is present in own schema
where table_name = 'TABLE_NAME'; --provide the TABLE_NAME
stmt varchar2(1000):= '';
v_count number;
count_null number;
begin
execute immediate 'select count(*) from TABLE_NAME' into v_count; --provide the TABLE_NAME
for rec in col_cur loop
execute immediate 'select count(*) from TABLE_NAME' where --provide the TABLE_NAME
'||rec.column_name||' IS NULL' into count_null;
if count_null = v_count then
stmt :=stmt|| rec.column_name ||chr(13);
end if;
end loop;
dbms_output.put_line(stmt);
end ; -
Activate change logs for the table V_T007K
Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda -
How can I give different Editors in the same column for the jTable?
I am having a JTable with 2 columns and 10 rows. In the 2nd column, for the first 2 rows
I need to show JCheckBox, for nect 2 JComboBox and for remaining JTextField as the editor.
How can I do this. Thanks in Advance.Remember, the parent class of a cell renderer does NOT have to be a Component itself. Most do simply because the end result of the getCellRenderer call is the component itself.
Create 3 cell renderers, one based off of the checkbox, one based off the combobox, one based off of Object. The Object based one will hold instances of the other two renderers and will be the actual renderer supplied to the JTable. When called, based on the row, it will forward the call to the to the appropriate renderer and return the result of the call.
Technically, the internal components do not NEED to be renderers themselves, but doing so makes it a lot easier to test them independently of the combined renderer. -
hi
i have a scenatio where the table need
scroll bar , so ihave used scroll container
for the table and i am able to view both
horizontal and vertical scroll var , but i need
only verticle scroll var .
how can this be achieved ?hi
thanks for the quick response ,
but its not helping me .
i have set the width of the table less than
scroll container .
i need just vertical scroll bar to be visible
no horizontal scroll bars
iam able to view both .
Maybe you are looking for
-
ITunes deletes symlinked folder on Album Artist rename
Hello community, I experience a very strange behavior of iTunes in combination with Symlinked folders. I use Windows 7 and my folder structure is listed below. I have a Laptop with a 256GB SSD and instead DVD-Drive a 640GB SATA drive. Drive layout: C
-
Can anyone help me please? I tried to install and remove twice, We bought one year full package of creative cloud programs. Many thanks for a solution, i have 3 days trial left.
-
Hello im trying to make a counterstrike source movie and im recording my footage in 1600 x 900 and 16:9 so i finally figured out how to setup a CUSTOM sequence and get my resolution in there as 1600 x 900 and 16:9 but the issue i am having is the bla
-
Error installing EMET 5 on Windows 7 "key not valid for use in specified state"
No - those other references do not answer the question. However, this issue appears not to be EMET specific, but .MSI installer specific--i.e. other .MSI installs are failing on this machine with the same message... All of the references I have been
-
Desk jet f4280 wont print black
printer wont print black ink. prints color ink fine. infact, if i have an office doc i just change the text color 2 dark blue, and it is just fine. color ink indicator is all 4 lights bright green. black ink indicator is all 4 lights-light green.