Replacement Path Variable with Another Variable
Hi,
I am currently trying to create a report that would need me to have the same values for different characteristics (e.g. clearing date, posting date, net due date). I have seen that there is a way in the replacement path variable that would replace its value with another variable that is ready for input. I also looked into SAP help but I can't seem to figure out on how to do it specifically. Does anyone know a step-by-step process on how to do this? How does this work?
Thank you in advance!
take an e.g.
u have characteristic say ch1
u want to restrict it with replacement path variable
first of all create a variable var1
click what it is based upon for e.g. 0calday, 0material etc.
make it user entry variable
select single or multiple entry
make it mandatory
save it and hit okey
click on ch1
right click and say restrict
in new window create a new variable
give its name and technical name
processing path is replacement path
go to next tab of replacement path
select several ooptions
replace variable with another variable
select a variable called var1
change the offset length and offset start with different parameters.
hit okey
this way u have restricted ch1 with replacement path variable var1
now when u run report u have to enter value of var1
which will then further feeded to ch1
this way u can create replacement path variables at lots of instances and then u can always feed the value from var1 at different time
make sure as this ur requirement is date
try to use 0calday as reference infoobject all the times....
Similar Messages
-
How to replace one variable with another in large number of queries
Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them) -
How to get a "char variable" with presentation variable???
I want to pass a char variable with presentation variable, I don't have problems if I pass "int".
For example in answers page I add a column that contains years of my dimension. 2000 until 2012 and prompted my presentation variable "year" (from my dashboard prompt) and when I go to dashboard if I choose in my prompt 2006 in my report appear 2006...any problem and easy. But my problem is if I would pass a char variable, in my prompt also I have months but not numbers else names: January, February, March...and a presentation variable that name is "month". If I do the same report but change column year to month (name) I don't have any results and I have an error.
How can I solucionate this???
Thank you!!Alex,
Do you have separate columns for Year and Month Name. If Yes, Then why it is so confusing?
1. create a dashboard prompt with month name column
2. Assign it to monthname variable
3. In your report use above variable any where.., but what ever you are doing should be logical and valid to get some data.
In general above approach will work.
You said, "No! I don't want to do a filter with month! I would like to pass this variable, in this example don't make sense but I need to pass a char variable with presentation variable to do another things..."
what does that mean, what you are trying to do with the variable in your report. If you give a example that would be better.
- Madan -
Replace a string with another string in a file
I have to replace a string with another string. Say for example in a html file it got a line like,
<a href="##"></a>
now i want to replace this ## with the full derived path like
"c;\\sample folder\\sample subfolder\\samplefile.html"
can someone help me to do this?
pls tell me from the file opening till closing the file.I have to replace a string with another string. Say
for example in a html file it got a line like,
<a href="##"></a>
now i want to replace this ## with the full derived
path like
"c;\\sample folder\\samplesubfolder\\samplefile.html"
can someone help me to do this?
pls tell me from the file opening till closing the
file.
public class Buckel {
final static String CONST = "c:\\sample folder\\samplesubfolder\\samplefile.html";
public Buckel() {
public static void main ( String[] argv ) throws Exception {
int idx = 0;
String in = "<a href=\"##\"></a>", // We'll imagine this just gets here somehow. If it's on the i/p file then take the '\' out B4 and aft the '##'.
out = "";
idx = in.indexOf( "##" );
if ( idx > 0 ) {
out = in.substring( 0, idx ) + CONST + in.substring( idx+=2, in.length() );
System.out.println( out );
} -
Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
How to replace a movieclip with another movieclip
How to replace a movieclip with another movieclip
Hi,
I am having a swf called tchild.swf... in this i got a
movclip 'child1'. i am loading this tchild.swf into another swf
tparent.swf within 'mcloader' movie clip.. i got another movclip
called 'picture1'
i am loading tchild.swf into mcloader movclip.. and i want to
load 'child1' moviclip into picture1..
how to replace a picture1 movieclip with child1 mc..
PS: i dont want to load picture1 from library.. its on the
stage.AWT or Swing?
-
Replacing multiple spaces with another character
i need to replace multiple spaces with another char in a string
my code is
Dim text as String="a bit much a little much" Dim arr As String() = text.Split({" "c}, StringSplitOptions.RemoveEmptyEntries)Dim newtext As String = String.Join(" ", arr) MsgBox(newtext)
it returns to "a bit much a little much "
But i want to replace only long spaces with "=" as "a bit much =a little much"
How can i do that?This version uses two spaces to split the string and then trims any additional single spaces. It returns "a bit much = a little much".
Dim text As String = "a bit much a little much "
Dim parts() As String = text.Split({" "}, StringSplitOptions.RemoveEmptyEntries)
Dim newText As String
If parts.Length = 2 Then
newText = parts(0).Trim & " = " & parts(1).Trim
End If -
Qosmio X500-10W - Can I replace the HDD with another one?
Hello
I have a Qosmio X500-10W with two HDD Toshiba MK5055GSX 500GB 5400RPM 8MB ??SATA II but is one of hs so I wonder if I can be replaced by a more powerful style HDD 750GB 7200tr / min 16MB Toshiba course?
merciHey,
Your question is a little bit hard to understand but I think you want to replace the HDD with another (faster) model, right?
Well, thats no problem. HDDs with 7200rpm will work, they are a little bit louder but they are faster so if you need more performance no problem.
Also 750GB or more is no problem because SATA interface is not capacity limited. Theoretically 1TB or more should also work.
Anyway, you can buy the 750GB you mentioned it will work. :) -
How to auto create a global variable with specific variable name in a global vi ?
how to auto create a global variable with specific variable name in a global vi using lv ? Because i need to add a lot of global variable in this global vi. But you know, if i manually add them , it will be a much time-costing work. So i want to use someway to auto generate ? Can i ?? Thanks a lot !
Hi
what aartjan is saying is the way for you. but you can develop an utility which will actually help you create global variables. To get the details on this just have a look at VI Scripting section on LAVA forum.
But i would like you to suggest few things
1. If your programs have so many global variables (Thats why u want utility) then you should take out some time to read about LabVIEW design patterns. I think if programmer follows these practicess he dont need a single global variable.
2. Their are some other ways to achieve similar functionality as of global variables (Uninitialized Shift Registers, Single Element Qs and so on) but they are much faster than global variables.
I am Attaching Whatever Resources i am having I will also attach the template of the design pattern i generaly use in short duration
Message Edited by Tushar Jambhekar on 10-06-2005 07:33 PM
Message Edited by Tushar Jambhekar on 10-06-2005 07:36 PM
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog
Attachments:
LabVIEWDesignPatterns.zip 1505 KB
Large_Code_Implementation.zip 522 KB
Database Tests.zip 868 KB -
Variable replacement path with another variable
Hi Guru's
I'd like to use the functionnality of replacement path from a variable.
Well, i have variable V_1 which is a basic manual entry variable based on a date infoobject. this variable is not mandatory and accessible.
And i have the variable V_2 which should be based on V_1 so i created V_2 with a process replacement path and in the replacement tab i put V_1 (i try with the list but i didn't find my V_1)
But the result is that V_2 is always empty but i have no problem when i check the query
So do you have any idea ?
Why i can not see the V_1 in the list of variable from the replacement ?
I don't want to use by exit. i know that it is possible but i want to use the main simple functionnality for flexibility is maintenance by users.
Thanks for help
Cyrilthanks for your answer,
svu123, my V_1 variable is of course in a correct status to be used. i made test in first without V_2.
And when i create V_2 in the first tab i activated correctly the replacement in processing type. if not i can not choose
the query or variable source and i can not see the list of variables.
Rakesh, i tried what you answered without results. i check different variables that are available in the list and i have
lots of different variables (all in ready for input) but i have interval, multiple single values, SAP standard variables my own variable on other fields.
any other ideas ?
many thanks
Cyril -
Replacement path using the text variables.
Hi all,
I need to create the text variables of processing type replacement path. can any one help me by sending the step by step procedure for the same.
Thanks & Regards
KKHi KK,
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
The example is applicable for Dates in the same way you can create for Text also.
Regards,
R.Ravi. -
Stepping through a query result set, replacing one string with another.
I want to write a function that replaces the occurance of a string with another different string. I need it to be a CF fuction that is callable from another CF function. I want to "hand" this function an SQL statement (a string) like this: (Please note, don't bother commenting that "there are eaiser ways to write this SQL..., I've made this simple example to get to the point where I need help. I have to use a "sub_optimal" SQL syntax just to demonstrate the situation)
Here is the string I want to pass to the function:
SELECT
[VERYLONGTABLENAME].FIRST_NAME,
[VERYLONGTABLENAME].LAST_NAME,
[VERYLONGTABLENAME].ADDRESSS
FROM
LONGTABLENAME [VERYLONGTABLENAME]
Here is the contents of the ABRV table:
TBL_NM, ABRV <!--- Header row--->
VERYLONGTABLENAME, VLTN
SOMEWHATLONGTALBENAME, SLTN
MYTABLENAME, MTN
ATABLENAME, ATN
The function will return the original string, but with the abreviations in place of the long table names, example:
SELECT
VLTN.FIRST_NAME,
VLTN.LAST_NAME,
VLTN.ADDRESSS
FROM
LONGTABLENAME VLTN
Notice that only the table names surrounded by brackets and that match a value in the ABRV table have been replaced. The LONGTABLENAME immediately following the FROM is left as is.
Now, here is my dum amatuer attempt at writing said function: Please look at the comment lines for where I need help.
<cffunction name="AbrvTblNms" output="false" access="remote" returntype="string" >
<cfargument name="txt" type="string" required="true" />
<cfset var qAbrvs=""> <!--- variable to hold the query results --->
<cfset var output_str="#txt#"> <!--- I'm creating a local variable so I can manipulate the data handed in by the TXT parameter. Is this necessary or can I just use the txt parameter? --->
<cfquery name="qAbrvs" datasource="cfBAA_odbc" result="rsltAbrvs">
SELECT TBL_NM, ABRV FROM BAA_TBL_ABRV ORDER BY 1
</cfquery>
<!--- I'm assuming that at this point the query has run and there are records in the result set --->
<cfloop index="idx_str" list="#qAbrvs#"> <!--- Is this correct? I think not. --->
<cfset output_str = Replace(output_str, "#idx_str#", ) <!--- Is this correct? I think not. --->
</cfloop> <!--- What am I looping on? What is the index? How do I do the string replacement? --->
<!--- The chunck below is a parital listing from my Delphi Object Pascal function that does the same thing
I need to know how to write this part in CF9
while not Eof do
begin
s := StringReplace(s, '[' +FieldByName('TBL_NM').AsString + ']', FieldByName('ABRV').AsString, [rfReplaceAll]);
Next;
end;
--->
<cfreturn output_txt>
</cffunction>
I'm mainly struggling with syntax here. I know what I want to happen, I know how to make it happen in another programming language, just not CF9. Thanks for any help you can provide.RedOctober57 wrote:...
Thanks for any help you can provide.
One:
<cfset var output_str="#txt#"> <!--- I'm creating a local
variable so I can manipulate the data handed in by the TXT parameter.
Is this necessary or can I just use the txt parameter? --->
No you do not need to create a local variable that is a copy of the arguments variable as the arguments scope is already local to the function, but you do not properly reference the arguments scope, so you leave yourself open to using a 'txt' variable in another scope. Thus the better practice would be to reference "arguments.txt" where you need to.
Two:
I know what I want to happen, I know how to make it happen in another programming language, just not CF9.
Then a better start would be to descirbe what you want to happen and give a simple example in the other programming language. Most of us are muti-lingual and can parse out clear and clean code in just about any syntax.
Three:
<cfloop index="idx_str" list="#qAbrvs#"> <!--- Is this correct? I think not. --->
I think you want to be looping over your "qAbrvs" record set returned by your earlier query, maybe.
<cfloop query="qAbrvs">
Four:
<cfset output_str = Replace(output_str, "#idx_str#", ) <!--- Is this correct? I think not. --->
Continuing on that assumption I would guess you want to replace each instance of the long string with the short string form that record set.
<cfset output_str = Replace(output_str,qAbrs.TBLNM,qAbrs.ABRV,"ALL")>
Five:
</cfloop> <!--- What am I looping on? What is the index? How do I do the string replacement? --->
If this is true, then you are looping over the record set of tablenames and abreviations that you want to replace in the string. -
Using a variable inside another variable
I'm trying to use one two variable in a package with one variable feeding its value to another variable as follows:
Variable 1 = Count
Variable 2 = File_Name
Variable 1 counts up from 1;I would like to use this value as an input to Variable 2 as follows:
SELECT LOAD_FILENAME FROM DIMSTATS_FILENAME WHERE (SELECT ROW_NUMBER() OVER (Order by FILE_ID) AS RN FROM DIMSTATS_FILENAME) = #DIMSTATS_TEST.count.
How ever I am getting the following Error :
+ODI-1228: Task File_Name (Variable) fails on the target connection DDBSTAGE.
Caused By: java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]The multi-part identifier "#DIMSTATS_TEST.count" could not be bound.+
I have also noticed that the value of Variable 1 is not being passed to the Select statement above through SQLServer Profiler. If I hard-code the value of #DIMSTATS_TEST.count (Variable1) the query is successful.
How can I get the value of Variable 1 to be passed to Variable 2?
Could someone please help
ThanksYou did not mentioned how you are using those variable .
You need to have these variable inside a package .
It will be like
Variable 1 (Refresh) -------OK-------->Variable 2(Refresh) ------------OK-----> Some other operation .
Thanks,
Sutirtha -
I can't find the tutorial on replacing a person with another image from a different photo.
I got an email with a link to a video a long time ago that showed how to remove a person from a group photo and replace this person with an image of them from another photo. It does not seem to be in the videos on my Phtotshop elements 9 list within the program. Does anyone have a link to this video so I can save it and rewatch it? Thanks
Click on the link below and go to: Easily Create the Perfect Photo
It’s designed for several people but it should work with just one person in the shot. After viewing the tutorial open both images in Full Edit and go to:
File >> New >> Photomerge Group Shot
http://www.adobe.com/products/photoshop-premiere-elements/features.edu.html?promoid=GYSZM -
How do I replace a color with another color?
I'm not having any luck finding this. Is there a simple way to replace a color (like a red shirt) with another color (green shirt)? Somehow I'm not seeing this anywhere. I know how to do it in Premiere Pro.
You can use the Color board ("corrector"). Click on the Eye dropper icon and click and drag over the t-shirt (you'll see some feedback of what's being selected.) You can hold down the shift key and click/drag (slightly) on other spots to add more to the selection (or hold down the option key to subtract from the selection.) You can also use the Color Mask slider to add or subtract from the selection.
Then click on the right arrow for the Correction and in the Color Adjustment, click and drag the Global control to change the color.
Maybe you are looking for
-
Some of my facebook and instagram notifications are no longer audible
Basically, I am only being audibly notified on facebook when someone sends me a message. In other cases, I only get a badge icon and a banner, but no sound. With regards to instagram, no sound whatsoever. I checked my notification settings. Both face
-
Having come to the forum to ask an actual question, I have been laughing at Bill's dialog with himself. Anyway, here is the question: I have about 20 audio clips that I want to play for a client to get a feel for the type of music they might like. I
-
How to load a XML-Schema (XSD) from Classpath
Hi I want to perform XML Schema Validation using a XML-Schema stored in a File "MySchema.xsd" in the classpath. Unfortunately I have no clue, how I can load this file without using an absolute path. I already tried: Thread.currentThead().getContextCl
-
Data Set - Encode Attribute Value?
I'm using an HTML data set with an active region. Some of the data is to be used as attribute values (e.g. as the "value" of an "input" tag), and some of the data is to be used within the HTML of the document (but should not be rendered as HTML). Wha
-
Ipod classic unregisters from mac every time i try to restore with itunes
i have a 7th generations 120 g ipod. every time i try to restore it, you hear an audible click as it unregisters itself from my computer. And it will keep appearing and disappearing in that manner until i physically remove it from my computer. even w