Replacing master page layout for documents

Hi all! I have been making a book, and have been using our standard master page layout. I now have to change the master page layout of the whole book, and I have made a document that uses the new master page layout. I did the typical make new master page layout, gave it a name, and everything seemed normal. I then went to add it to the existing documents but, my new layout is nowhere to be found. How do I add this new layout? I thought I could just change out the current master page layout for the new one. The only changes are the graphics at the top, and some header and footer changes. Body text stays the same. I'm on FM11 by the way.

> I then went to add it to the existing documents ...
How? Import Formats from the Book menu should do what you want, followed by an Apply Master Page operation (assuming the new pages have exactly the same names as the old pages to be replaced).

Similar Messages

Copy single master page from one document to another?

The answer to a previously posted question seems to involve creating a document differently (than I had). A lot of work went into the creation of the master pages in the original document which I will now need to recreate in the new document. Is there a way I can copy one master page from one document to another?
Many thanks,
Theresa

There are a number of ways to do this.
Create a copy of the document you want to copy the Master page from. Delete all pages except for the one you want (but you have to leave Right and Left alone as FM must always have these two pages available).
Open the new document and the one that you want to import the master pages from.
In the new document:
Import from Document: (select the document with the Master Page that you want)
then
File > Import > Formats
and select Page Layouts only.
Note that Right/Left always come along for the ride.
Alternative and probably best way to get a single Master Page:
In new document, add a new Master Page and select "Empty".
In the old document, on the desired Master Page, Select All on page (ctrl+A) and then copy (ctrl+v).
In the new document on the new master page, paste (ctrl+v) to add the layout. Note: you may need to rotate the page first if it isn't in the same orientation as in the old document.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery or directly typing its URL

I apply theme before singing all users into application ,now visitor/member are not affected color text so we are reapplying themes
I am not able to reapplying SPColor /my site Host template " An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery
or directly typing its URL" while applying theme i am getting error

is it your public site/ community site or team site?
what level of subscription you have?i would say try to delete the site and try to create a new.
http://community.office365.com/en-us/forums/154/t/147705.aspx
are you able to open the site in the sharepoint designer?
or try to send them the private message to the support team.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Change Layout for Document Access Right

Dear SAP B1 dev. team and management,
I have read the LICENSE COMPARISON CHART in the following link:
https://websmp206.sap-ag.de/~sapidb/011000358700000953982007E
I find that there is a confusing functionality in the sales A/R. It is change layout for document. Does it means change PLD for document ?
In the chart, the change layout for document acess right is full for logistict users. Does it means that all users that assigned with limited logistics will be able to change the default PLD before they start to print the delivery order ?
if yes, the SAP B1 8.8 SP00 PL12 seems has bugs. I said so because the user with limited logistic (LL) can open the PLD icon to change the layout they want to use. The chart info seems uncorrect and the SBO end users can claim that it's deceitful.
Could you check it and create hotfix for your B1 8.8 SP00 PL12 ? Thanks in adv.
Rgds,
JimM

Solved in B1 8.8 SP00 PL13

Is it possible to define master page usage for a linked project?

Hello again!
I feel like I'm spamming this forum with all my questions, but I seem to be having a difficult time trying to find information on FM/RH integration.
Is there a way to define which master pages are assigned to the topics linked to FM files?
I don't really want to do this individually for each topic (I only have 2 master pages: one for the intro page and another for all other topics).
Even so, when I map a FM file manually to a RH master page, I get a warning message stating that any changse to the topic will be overwritten on the next FM file update.
Any ideas?
Thanks again.
Sue

Hi Sue
I'm a RoboHelp user and a big ole Frame ignoramous. So what I'm about to tell you comes from the RoboHelp perspective.
SueC2009 wrote:
...I don't really want to do this individually for each topic (I only have 2 master pages: one for the intro page and another for all other topics)...
Indeed it would be VERY cumbersome if you had to associate a Master Page on a topic by topic basis. The good news here is that you have an ability in RoboHelp to select as many topics as you like and only make the association a single time.
Just open the Topic List pod. There you are able to select all topics by pressing Ctrl+A. From there you are then able to associate the desired master page.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How make Adobe Muse Master page Template for BC

How make Adobe Muse Master page Template for BC.?
Thanks
Ares

Hi Brad,
I notice doble brackets and also use normal page for converting it to BC template. Also I have delete uploaded page from /dir as BC every time generating the same tamplate but with diferent name when I am publishing updated project from Muse.
Ares

Custom Master Page issue with Document Set Libraries

Details: Publishing site using SharePoint 2013. The SharePoint is on my company's servers.
Have a custom Master page that has a navigation banner (built with HTML/CSS/javascript). The site has it applied successfully to the "Site Master Page" but when I also apply it to the "System Master Page", the libraries that have
Document Set type content do not show the files within. We'd like to be successful in applying to the "System Master Page" as that allows the banner to show when an actual library is accessed. Any suggestions, please?

Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
Thanks again,
Steven

How do I create a template/page layout for artwork for a folder?

Hi can someone please explain how I can create a page layout in Indesign CS5 to design the artwork for a folder. The folder is an A4 paper wallet type folder with a 3mm spine - I'm just not sure how to build this on the page! I have a subcription to lynda.com but can't seem to search out a relevant tutorial.
Thanks in advance for any help!
Olwen

Do you mean for a Pocket Folder?
Here's a quick and dirty way.
New document > Page Size > A3 > Toggle wide
Place your curser in the width and after the dimension type +3mm
Set Columns to 2, Gutter = 3mm
Margins 0
Bleed, if needed, to 3mm

One Master Page made for multiple files

Can Master Pages be made, to be used in multiple files? If possible, how?

sort of. You can use Move Pages to copy whole master pages between documents, or you can connect the files using the Book function, and then sync Master pages for all documents in the book.

Why is the master page default for 2 pages?

New to ID; Why are the master pages paired? I made several Master pages that consist of one page and they worked fine, so I'm wondering what I'm missing; no doubt there is a reason that the default is for a pair of master pages. So, what;s the reason?
vasi

Master pages are paired into spreads when you have "facing pages" checked off in your document setup dialog. This allows for having different information, like mirrored positioning for page numbers, or different running headers, on opposite sides of the spread.
If you only make single page documents or docs that are printed on only one side you might want to uncheck that box.
Peter

Can't select Master Page object on document page.

Hi,
Yes, I know this question has been asked a million times. But, it's just not working for me. I've got a simple green box at the bottom right of my master page. I've made it into a button. I've allowed the master page to overwrite. But, on my document pages I simply cannot select this object. I've made the object into a button, per the master page, and, I need to have it link from each page back to a previous page in the document. Yes, I've tried Cmd + Shift, then click on the object, but, that doesn't work.
My button shares space with a page text box. Those are the only objects on the page, though. If I move the text box up, then yes, I can select the button. But, that's cheating.
Thanks a lot for any help.

What do you mean shares space with? Is it on top of the button?
If so, try locking it the text frame..
Bob

Custom page layouts for iPhoto books- bleeds and type

I've been digging through the forum for info on creating custom page layouts. I have the basics: print PDF (to capture the page BG and graphics elements), manipulate in PhotoShop and place the custom page as a full page photo.
How does iPhoto deal with bleeds? Since I'm trying to recreate the style of the other pages I'd like it to match.
Is all type in an iPhoto book rasterized? The printed PDF retains type. Will rasterized type in PS layouts match "native" text in iPhoto?
I haven't purchased a book yet and I'm wondering if the book is sent to Apple as a PDF with vector data. If that's the case can custom pages be inserted into the PDF with vector type intact?
Thanks all!
rg

gatz:
Welcome to the Apple Discussions. I don't know much about bleeds but you can manipulate it in the iPhoto preference file with Pref Setter.
Regarding the rasterized type, you'll have to give it a try and then create a pdf of the book to check it out. In iPHoto 5 we used to be able to get a copy of the pdf file that was uploaded to Apple but in V6 that's not possible. I think the pdf file may be the same as we get when creating it via Print to PDF. Here's the info I received from Apple about book quality and materials:
I contacted Apple and asked for information that I could pass on. Here's the reply I received from Apple:
"Thank you for contacting the Apple Print Products Customer Service.
I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
For more information regarding iPhoto 2, please visit the following article:
iPhoto: Color, Black and White Prints Appear Garbled or Distorted
For more information regarding iPhoto 5, please visit the following article:
http://docs.info.apple.com/article.html?artnum=165501
Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
BOOKS
All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
Hardcovers Books
The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
Softcover Books
The softcover books come in three sizes:
- Large 8.5 x 11 inches
- Medium 6 x 8 inches
- Small 2.6 x 3.5 inches
All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
CARDS
All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
CALENDARS
All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
KODAK NEXPRESS 2500 Digital Production Color Press
I hope you find this information helpful in answering questions on the iPhoto forum."
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Sharepoint 2013 master page branding for public site

We have created one SharePoint 2013 public site in office 365.
We create a custom master page for entire site.when i am login with particular user then its fine.but for anonymous user publishing page design and content not properly view.
please provide me proper solution for publishing page layout that works with anonymous user.

You should be able to configure this within the library settings of the master page library as below.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Replacing master page layout for documents

Similar Messages

Maybe you are looking for