Replacing Topcase - wich one to buy?
hi!
I need a new topcase for my macbook bought in October 2006.
I've allready bought one on wich some keys don't work (backspace, the 4 punctuation keys right down, and the F12 one). Then i've noticed connector wasn't the same gold instead of Silver currently on my MB.. So I think i've probably made a mistake in the compatibility of this topcase with my MB model..
Have i right? and so if i buy no matter wich one with a silver connector will it be definitely working with my MB or have to check my serial number with the topcase's one..?
Someone can get me one but i don't know wich one i have to get..
Thank you very much.
i can give you my MB serial number if it can help you...
discojesus wrote:
yes that's this. keyboard + trackpad + housing
in fact it's really simple to replace.. i've allready replace it several times..
and the 2 times i made this done buy Apple technicians it have been really neglected.. that's why i need to replace it now myself cause the one they've installed me is misworking. I tried to tell them but of course it's my fault..!!
so i just don't know how to know if a top case will be compatible with my MB..!
and i'm sure somebody here know this..!
thank you anyway deltalux for your answer!
Hence why I said don't attempt unless you know and you said you know so, I'm going to help you a little more. Based on the poster above's link, if your Macbook is of the Mid 2007 revision or older, you need to get this:
http://cgi.ebay.com/MacBook-White-Keyboard-Version-1-NEW-Grade-BW0QQitemZ270302053873QQihZ017QQcategoryZ80032QQcmdZViewItemQQtrksidZp1742.m153.l1262
else, get this:
http://cgi.ebay.com/MacBook-White-Keyboard-Version-2-NEW-Grade-BW0QQitemZ270302050241QQihZ017QQcategoryZ80032QQcmdZViewItemQQtrksidZp1742.m153.l1262
deltatux
Similar Messages
-
Replacement iphone(hardly one month old phone) is a new one or refurbished ?
Replacement iphone(hardly one month old phone) is a new one or refurbished ?
I am facing lot of issues with my iphone 3gs.Please i request you guys dont buy any apple products here.its waste.I bought my iphone one moth back when i use GPRS(internet ) on my phone .it will shut down and gets heated.Went to imagine(Authorised apple service center)they said will replace the phone when i went to collect the phone they said it a new one when i check the connector it was having all dust in it.WHEN I ASKED THEN AGAIN THEY SAY ITS A NEW PRODUCT.HOW COME A NEW PRODUCT HAS DUST COLLECTED IN CONNECTOR DOCK.
Replace the phone with a brand new phone.There should be no way to tell. The dealer/store shouldn't know either. It should be good as new.
The warranty clearly states that it can be a refurb unit. You have no say in the matter. -
Hi it's me rabia and i'm apple user
I want to change my cell phone because it's having scratches on it and i also feel like its home button did't work correctly
So i want to know that can i have a new cell phone on replace of this one at any nearby of my house App store without any cost ?
But i'm not having any line yet on my phone i use it on net mostly so what is the scene can i have or can't ??
please inform me soon !Is your phone still covered by warranty? If so, go to your nearest Apple store and depending on what happened, this may or may not be covered by warranty. If it is, then you can get a replacement exactly as the phone you already have.
If out of warranty, then there is nothing you can do and you'll have to pay. -
IPhoto library Gone! (replaced in just one click w/o ever dragging 2 Trash)
iPhoto library gone / replaced in just one click (w/ o ever dragging anything to the trash)!
I currently own multiple PowerMacs all sharing the same high speed local network. All of them run the latest / Mac OS X.4.9 and have multiple HD’s (both internal and external) as well as iLife’ 06. And all of them also have iChatAV3 and are able to video chat one with the other at will while on the same local high speed network.
This is my very first iPhoto library nightmare since I’ve owned a mac. and yes I’ve always been conditioned to backup everything one wishes to keep. This particular scenario is no different. (altho my back up HD for one of the three G4 computers involved was a bit dated by at least 6 months).
This was essentially triggered via two separate iLife ‘06 apps , namely iPhoto and iChatAV3 (combined with at least an ounce of stupidity on my part). That combined with 2 people not communicating properly / being on the same page (or rather the same Folder) when working on the very same task. Hey... I do NOT claim to be an expert at this particular application even though I have used macs since apple first introduced the Apple IIe decades ago. So this does not stem from lack of experience but rather not thinking things thru entirely in terms of all the possible consequences of simple, yet catastrophic actions when it comes to replacing or authenticating one particular folder containing the entire iPhoto Library simply titled “pictures”.
Starts like this, ichatav is open on 2 of three macs and my teenage daughter asks me to send her a roll of pictures she downloaded into my computer (since it’s twice as fast as her own) from her digital still camera. Now she wants all 12 photos on her computer as well. So I drag all 12 photos to my desktop and place them in a folder titled “Jackies pics”. I drag this folder to her icon on my buddy list and ichat AV simply refuses to allow sending the entire folder and ask me to send them one at a time. That should have been my first clue. Strange I thought. Always worked well in the past. Why not now? So I tell her over ichatav that the app simply won’t allow me to send her the entire folder and that I’ll have to send them one at a time. Please make a new folder on your HD called Jackie’s pics. She agrees and creates a folder on her end called .... (you guessed it) ...... “pictures”...... to which she drags each of the 12 images I sent over our local network.
Little did she realize this newly created folder has the makings of an atomic bomb when it comes to importing the entire folder into iPhoto’s library on her own mac. A dialog box quickly materializes asking that she “authenticate” or hit cancel. So she ask me what to do. I said that’s fine, hit authenticate (assuming she titled it Jackies pics). BIG mistake! She hits authenticate and now she has the 12 images I sent her in iPhoto....BUT .... the 1600 or so originals in the entire iPhoto library quickly vanishes. Her entire iphoto library is now wiped out or rather replaced with this new folder. She asks me, what happened? And in less than 30 seconds she in complete tears. Over 2-3 years of her photos (all 1600 images) gone in the click of a mouse.
Today is father’s day .... and I remembered that I have a complete backup of her HD (even though it is a bit dated). So together, we managed to recover about 90% of the lost images. If anyone reading this knows how I can possibly recover the final 10% (most current photos) then please help us.
Bottom line: We were fortunate. This Father’s Day iPhoto Nightmare ended happily....
TIA
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)Just another update .... Today, my daughter was multitasking on her G4 powermac working within iPhoto as well as email account and last but not least the latest iTunes. As she opened this final app (and I mean "final").... her entire hard drive bit the dust after she saw the spinning beachball and hence attempted to force quit. (I should also point out we are having a heat wave in San Diego today ...which also may have contributed to this hardware issue mainly).
This time, I had a complete updated copy of her HD and simply cloned it to a new hard drive. Took me a few hours to troubleshoot, clone and install a new drive in its place. But all is working normally again (sure hope it stays that way this time).
Friendly reminder to those who read this post .....
BACKUP, BACKUP, BACKUP .... ESPECIALLY IN IPHOTO & ITUNES! -
I have a new computer and want to sync my iPhone's apps. when I tell it to do so it says that all apps in my phone will be replaced by the ones in iTunes, but it's empty because it's new. If I do so will all my apps be deleted?
Transfer purchases over from your phone to your computer before you sync your apps. See Transferring Purchases for more details.
-
How can i start a new user profile service in ordre to replace an old one ?
hi
i create a new user profile service in ordre to replace an old one
when i use : Get-SPServiceApplication i can see that hi is created but
when i use Get-SPServiceInstance i can see it i can see only the old oneHi,
The Get-SPServiceInstance returns the services instance for a specific server or the entire farm. The service instance GUID is unique to every farm and cannot be changed.
For starting a fresh with the User Profile Service configuration, you can unprovision and re-provision the User Profile Service:
http://sharepoint.stackexchange.com/questions/16146/deleted-service-application-service-instances-remain
http://www.harbar.net/articles/sp2010ups2.aspx#ups14
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are: the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?
I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are: the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?
-
How do I install a new system file to replace the damaged one
I am tring to repair the permissions on my computer and am getting all of these types of errors. Computer is dragging. I reinstalled my operating system and this is what is happening. Any suggestions. Happening on my desk top I Mac and on my Mac Book. I did google search and Error 23 is "These errors indicate that the Mac tried to access one of the standard routines in the system file and couldn't find it. In all probability, that means you have a corrupted system file. Try installing a new system file to replace the damaged one."
Here is a sample of what disk utilities says
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/cdesc-Con versions.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_format ted_s-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_param- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_query- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_senten ce-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_xml-i. yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions/cdesc- ExtractOptions.yaml"
It says it should be done in 6 minutes and I am going on hours!
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib"."
Any suggestions?I would apply or reapply the 10.6.8. Combo Update from Safe Boot (hold Shift down at startup -- give it much more time to boot than usual and leave it in SB for a few minutes before doing anything.)
http://support.apple.com/kb/dl1399
The messages you are seeing beginning with "Permissions differ on...." can be ignored. -
I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
Anyone a solution?I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.
-
I got some applications like games etc installed on my iphone through a friend's pc.
now when i downlaoded some apps on my pc and try to sync , it says that the existing apps on my iphone would be replaced by the one in my itune library.
what is the way that i can have the existing apps on my iphone to remain and also install new apps when i download without losing the installed onesI got some applications like games etc installed on my iphone through a friend's pc.
Were these apps downloaded via your own iTunes AppStore account or your friends?
now when i downlaoded some apps on my pc and try to sync , it says that the existing apps on my iphone would be replaced by the one in my itune library.
That's correct. iTunes will delete any apps you have not downloaded through your own iTunes account. If you did use your own iTunes account, choose iTunes > File > Transfer purchases... to move the apps into your own iTunes Library.
what is the way that i can have the existing apps on my iphone to remain and also install new apps when i download without losing the installed ones
Re-download the apps through your own iTunes account (pay for them if necessary). Apps cannot be shared between different iTunes user accounts. -
I have over 16,000 songs in my iTunes library so I manually manage the music on all my devices. I bought a new iPod to replace an older one. I'd like to transfer all 900 songs to my new device without having to handpick each song from my music library. Is there a way to do it?
No. I have quite a few more 16,000, so I don't manually manage. Making playlists for each device makes things much easier to organize. You can create regular lists of essential tracks and smart playlists to automatically catch new content, top rated, most played etc. If you'd done it this way all along configuring a new or restored device would be the work of moments.
tt2 -
Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?
Hey there longislandmacca,
It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?
Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.
-
Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268 -
To replace values of one of the field in the database table
How to replace values of one of the field in the database table with a new values? Pls help to solve
Hi
You can use the UPDATE command to update one of the field value in a table
see the UPDATE syntax and use it
but in real time you should not do like this
Regards
Anji
Maybe you are looking for
-
Date format in Discovere Reports
We have created a workbook with a parameter which is supposed to show up an LOV for a parameter in the MON-RR format. Now this LOV shows up correctly in the Discoverer Desktop edition as MON-RR format, but when we view the same in Discoverer Viewer i
-
HT201335 what type of hdmi cable do I need to get for my apple TV to connect to my HDTV
Hi I just got myself an apple TV and would like suggestions on the best connection cable to buy to be able to connect my apple tv to my LGHD TV. Regards
-
Is 4S camera zoom digital or optical?
I've taken some zoomed photos with my 4S iPhone. I think this results in a smaller .jpg file. Is the 4S zoom doing a digital zoom (which is about the same as a crop)? Maybe it would be better to take a non-zoomed photo and then crop in Photoshop?
-
How do I get Photoshop CS5 working again after OS 10.10 upgrade?
-
"Show logging" displays the switch UP time not the Date & time
Hi, i have cisco 2950 switch, when i type the show logging, what ever event has happend i am getting like this "26w6d: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down" but it is not showing the date & time when the event has occured