Report 11g RUN_REPORT_OBJECT is not working FRM-41214
Dear all,
We are not able to run the reports using RUN_REPORT_OBJECT from forms 11g, we have tried our maximum to resolve this issue, unfortunately no proper documentation. Forms working without any issue are able to see the report out puts if I try running the report using internet explorer, but from the forms using RUN_REPORT_OBJECT It is getting failed. I could see two reports servers were running RptSvr_xxxxxx_FrmInst, rep_wls_reports_xxxxxx_frminst both servers queue status page also we can browse, but the reports running using RUN_REPORT_OBJECT is not working, the job queue is not showing these jobs.
When I use report diagnose it is showing "Exception when retrieving IOR"
Environment - Fusion Middleware 11.1.1.5.0, Windows 2008 server
Error : FRM 41214 Unable to run report
Can anyone through some lights on this issue.
We areTrying the below code :
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Thanks & Regards
user11319190 wrote:
I have posted it in the begning ,anway i am copying it for you again...
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
-----Please not that it is not reaching here......
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Edited by: user11319190 on 08-May-2013 00:12Hmm.. I don't see the report name whom is calling or run. I modified your code, give a try..
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(V_REPORT_ID,REPORT_EXECUTION_MODE,BATCH);
/* edit the report name like D:\repname.rep */
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,<write the full path of reports>);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
VJOB_ID := SUBSTR(VC_REPORTSERVERJOB,INSTR(VC_REPORTSERVERJOB,'_',-1)+1);
/* i added loop */
WHILE VC_REP_STATUS in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
END LOOP;
-----Please not that it is not reaching here......
IF VC_REP_STATUS = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;Hope this works..
Similar Messages
-
Report generation toolkit does not work
Hello,
The report generation toolkit does not work.
It seems to point to the 'Generate Report Data Members.ctl'.
I suppose it has something to do with the wrong set of active X-controls ?
I work with Win 2000 and Office XP
How can i solve this problem ?
Thanks in advance !
Regards
ChristineHello Julien,
Sorry for the late answer
I become a broken arrow, when openening the example Sample Report (Excel).vi
Searching further for the cause of the error it brings me to the sub vi tables.
Print screens in attachment
Regards
Christine
Attachments:
error Ni Reports.doc 67 KB -
12002 The Reporting Web Service is not working.
Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
NenadHi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Exporting Crystal Report to HTML is not working in Windows 7
Hi Sir,
I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
Below is the code to Exporting Crystal Report to HTML in VB.NET.
Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
Dim CrFormatTypeOptions As New HTMLFormatOptions
Dim vFormat As Integer
Dim CrExportOptions As New ExportOptions
Dim vRdReport As New ReportDocument
Dim sfd As SaveFileDialog
Dim vFileName As String = Nothing
vRdReport = vRptSource
sfd = New SaveFileDialog
If Not (vRptPath = "") Then
sfd.InitialDirectory = vRptPath
End If
sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
If sfd.ShowDialog = DialogResult.OK Then
' Set the disk file options.
CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
Else
Return
End If
CrExportOptions = vRdReport.ExportOptions
CrFormatTypeOptions.HTMLFileName = vFileName
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLHasPageNavigator = True
CrFormatTypeOptions.UsePageRange = True
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.HTML32
.DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
.FormatOptions = CrFormatTypeOptions
End With
vRdReport.Export()
Catch ex As Exception
MsgBox(ex.ToString)
End Try
Code working fine at Windows XP, But it is not woking in Windows 7 environment.
Please can anyone share your valuable thoughts or ideas reg. this.
Thanks in Advance
Deivanayaga Perumal D.user13509659 wrote:
Run this code to reproduce the issue.Which issue?
It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
Edited by: jduprez on Feb 10, 2011 1:01 PM -
'Report a Problem' is not working at all on my iMac. What do I do?
I'm running Mac OS X Version 10.5.8, 3.06GHz Intel Core 2 Duo, etc...
I have not been able to use the Problem Report interface for over a month.
No matter what software the problem is with, no matter how strong my internet connection is, I get a dialog saying "Submission failed: Your report could not be submitted. Please try again later." For example, here's a screencap from 1 minute ago, after Spotify crashed.
The same thing happens with Apple software as well as third-party. I have no idea what to do.
Any help will be much appreciated.
-S.StefanoBlack wrote:
None of this is the point though. I don't care about reporting the problems, I wanna know why my computer is having errors rendering a very basic function impossible. Hard drive problem, data corruption, mystery Mac virus...my concern is that this is a symptom of something bigger.
That's good to know, but keep in mind that your original posting complained solely about "Report a problem not working." That was the issue in the title and text of your original post. Several people responded with regards to that concern that you raised, and indicated that not being able to report back to Apple was not a serious concern, we don't think Apple is using that data much and may have turned off some of the reporting paths back to the company anyway. As Pondini said, if you are really concerned about some other problem, describe it so people here might address it. You mention "Hard drive problem, data corruption, mystery Mac virus ..." but provide no details except that the report back to Apple failed, about something. A report back to Apple failing to go through is not evidence of any of those things you mentioned, it's actually seen pretty often. -
Exe created with Report Generation toolkit does not work for all users
I created a exicutable with the report generation toolkit and it only works with some of my users. I use microsoft 2007 and anyone that has microsoft 2007 my exe works well. Most of my users that have microsoft 2010 are able to use my program as well. However, there is one user with 2010 and Windows 2007 that cant get my program to work.
Any suggestions for troubleshooting this?
ThanksThe most likely issue is due to the fact that Microsoft changes the ActiveX object model of Office for each version of Office. The Report Generation Toolkit does a pretty good job of handling this, but it is not 100% effective. Search, for example on the "Set Cell Border" function and you will see what I mean. In these cases it's up to you to handle this issue. How you handle it really depends on your situation. For us to provide a more concrete answer you will need to provide further details, such as what toolkit function is "not working" (whatever that means), and who you "users" are. Is this an internal distribution? Are you selling this program? Is this code written for a project with a specific customer?
-
Interactive Report Search bar is not working
Hello all,
I'm working on a Report. I has two regions, one is for select list criteria and Other is sql query.
To remove the No data forund. I added REQUEST = 'GO' for sql region.
When i run the report, selecting all my criterias and click search i get the interactive report.But the tool is not working. If i remove the REQUEST = 'GO' it's working.
Can anybody please help me.
Thanks,
KeertiKeerti,
You're using the "Display Condition" of the Interactive Report Region (IRR) to show the report or not.
If you have multiple selects just use a PL/SQL expression as in:
:P1_MULTI_1 IS NOT NULL
AND :P1_MULTI_2 IS NOT NULLNow, if that works for you lets take things a little further... You don't need the second submit button all the time (I'd get rid of it entirely but you seem to really want to hide the region until a selection is made). I did the following:
1. Updated the display condition of the report to use a PL/SQL expression.
2. Set the display condition of the submit button to the opposite of the IRR.
3. Added the item name of the select to the interactive report attributes > Advanced Attributes > Page Items to Submit.
Now the go button can be used for everything.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
Edited by: Dan McGhan on May 14, 2009 12:28 PM
Updated as only clicking "go" works with Page Items to Submit. -
Submit report using selection table not working in OO CL_SALV classes
I have used CL_SALV classes in my report. now the problem is submit report is not working. any suggestions.
It works in REUSE_ALV FMStill i m facing the same problem
-
Crystal Report formula with datediff not working as expected
We need a Crystal Report formula to display the number of seconds the oldest arriving call has been waiting. Across multiple resources that can each have an "oldest call". The database stores a datetime value for the time the oldest call arrived. If there are no waiting calls, then this field is NULL. (MSSQL database). It seemed reasonable to implement this in a formula that 1) discovers the minimum of "oldest call" timestamps in the selected records, and 2) to use "datediff" to produce the difference (in seconds) between the "oldest call" timestamp and current time.
The first attempt at this relied on "implied" iteration that could be done within a formula. Something like:
data: OLDESTARRIVALTIME
null
'2014-06-14 08:08:08.000'
null
'2014-06-14 08:07:55.000'
null
whilereadingrecords;
datetimevar minArrival;
if isNull({SVCCLASSMEASURES_VW.OLDESTARRIVALTIME}) = False
and minArrival < {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME} then
minArrival := {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME};
DateDiff("s", minArrival, {SVCCLASSMEASURES_VW.UTCDATE})
We tried storing the values of OLDESTARRIVALTIME in an array. We could see it iterating, but the values in the array only contained
the column value from the first record.
This was to solve the problem of screening null values and producing the minimum of the set.
Since that didn't work (and the web articles seemed to imply this would iterate over all the records, we tried another approach. This
time we set NULL timestamps in the table to a timestamp far in the future, so that we could directly apply "minimum" to produce
the correct "begin" for datediff.
data: OLDESTARRIVALTIME
'2030-01-01 00:00:00.000'
'2014-06-14 08:08:08.000'
'2030-01-01 00:00:00.000'
'2014-06-14 08:07:55.000'
'2030-01-01 00:00:00.000'
datetimevar minArrival = minimum({SVCCLASSMEASURES_VW.OLDESTARRIVALTIME});
datetimevar minUTC = minimum({SVCCLASSMEASURES_VW.UTCDATE});
if minArrival < minUTC then
DateDiff("s", minArrival, minUTC)
else
0
(minUTC would be current time in UTC)
So, to start things off, the last formula produces negative numbers! They hover in negative seconds within a negative minute (-33, -45, etc.).
That's inconceivable, considering the test for minArrival < minUTC. Both of the fields are "datetime".
As it turns out, in the near term, it's most important to get the second formula working. And, of course, insights into getting the first
formula to work are welcome as well!
Have we run into some weird behavior of the "DateDiff" function?
Thanks!If DateDiff is always returning a negative number you could try swapping the dates around in the call to DateDiff - it should look like this:
DateDiff("s", minUTC, minArrival)
Or you could use the Absolute Value of the calculation:
Abs(DateDiff("s", minUTC, minArrival) )
As for your first formula, you need to initialize the variable to a value prior to using it in the comparison. If you don't, its value is null and comparing it against a value won't work. (See What is Null and Why is it Important for Crystal Reports | SAP BI BLOG for a blog that I wrote about working with nulls in Crystal.)
You should change your existing formula to something like this:
whilereadingrecords;
datetimevar minArrival;
if OnFirstRecord then minArrival := DateTime(2013, 1, 1, 0, 0, 0);
if not isNull({SVCCLASSMEASURES_VW.OLDESTARRIVALTIME})
and minArrival > {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME} then
minArrival := {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME};
Note how I changed the If statement. Also, you want to replace minArrival with the field value if the field is less than the current value of minArrival - so you need to use ">" instead of "<" in the comparison. Place this formula in the details section. It will now show anything because of the semi-colon on the end. This will ensure that it gets evaluated for every record.
Now, create a second formula that looks like this:
whileReadingRecords;
datetimevar minArrival;
DateDiff("s", minArrival, {SVCCLASSMEASURES_VW.UTCDATE})
Place this formula in a footer section - it will not work in a header section. If you need it in a header section you might be able to take the "whilereadingrecords" off of both formulas and use the "Maximum()" summary function to get the correct value.
-Dell -
Wls 11g jaas module not working
Hi,
I am successfully using a standard JAAS module to authorize and authenticate users on an HPUX – WebLogic 9.2 environment. However when we port this exact JAAS module to a LINUX – WebLogic 11g environment, the JAAS module times-out after 25 minutes at WebLogic managed server startup and eventually fails.
We want to know if anything has changed from a JAAS perspective when comparing WebLogic 9.2 versus 11g? We have been unable to get JAAS authentication working. We tried re-creating the jar file but have now run out of options. They have over 16 different Linux servers that all have the same problem. All time out once the JAAS module has been implemented.
We are primarily interested in knowing if there have been any significant changes to the JAAS functionality between WLS 9.2 and 11g versions. They have tried recompiling/recreating the JAAS file on our Linux servers but the same result occurs. It simply stalls and then doesn't work after appearing to be hung for 25 minutes at start-up time.
It is a custom JAAS module that we have implemented. However the very same JAAS module that works for WLS 9.2 does not work for WLS 11g.
Any suggestions on how we can get this working would be very helpful.
Thanks in advance.
Edited by: user10600611 on Jul 8, 2010 5:53 PMYes, the packaging has changed somwhat, when you compiled for 11g didn't u get compilcation exceptions?
If you didnt, then you might not be using those packages.
Can u paste the stak trace/ thread dump at the time it was hung? -
Interactive Reports Action Menu buttons not working
We are running Apex 4.02 and using theme 11 (round green). We recently upgraded to IE 10 (on windows server 2008 R2) and are now experiencing issues with all interactive reports within Apex. The Action menu is displayed correctly and the options are available but the buttons to apply the changes do not seem to respond.
For example, I can press the Action button then select Format->Sort from the actions menu. The sort by options are displayed but nothing happens when I press the Cancel or Apply buttons. There is no error - it looks like the button press is not executing the code.
I have searched for issues specifically related to Apex but have only been able to find references to general problems with IE 10 and Ajax calls. I'm not sure whether IRs are using Ajax as part of it's core functionality and whether this is the behaviour we are seeing.
I'm keen to understand whether others have encountered this problem and resolved the issue somehow. Any help would be very much appreciated.I would have set this up somewhat differently. I'd have all of your buttons set to pause the slide in exactly the same spot about 1.5 seconds into the slide. To set the variable for completion of a section I would have used a standard or conditional action that was executed by the button that brings the learner back to the menu slide. This action would set the variable and then jump back to the menu slide using the button's On Success action. You need one of these actions per separate section in your project.
As to why some of your buttons are not working at all...
1. They may not be set up correctly. Check all settings again.
2. The buttons may be corrupted. Delete the ones that don't work and insert new ones. Avoid copying and pasting.
As luck would have it, I've just completed an e-book Guide to Adobe Captivate Advanced Actions that has an entire series of practice exercises that take you step by step through creating exactly the menu slide setup that you describe. If this project is important enough to you, it may be worth your while to consider purchasing that e-book:
http://www.infosemantics.com.au/adobe-captivate-advanced-actions -
Crystal Report viewer print dialog not working.
I have an asp.net website that i developed in VS 2010 that is using Crystal Reports 10.2. Everything works fine in the devleopment environment but when I upload it to the production server the print dialog wont print.
The print dialog opens up just fine but when i click print it says "Class not registered" at the top of the dialog.
How can I fix this problem?
Thanks in advance.Hello,
Please search before posting.
Visual Studio 2010 is not meant to work with Crystal Reports 10.2.
Download CR4VS2010 here:
[/people/blair.wheadon/blog/2010/07/29/crystal-reports-for-visual-studio-2010-beta-2-and-runtimes-now-available|/people/blair.wheadon/blog/2010/07/29/crystal-reports-for-visual-studio-2010-beta-2-and-runtimes-now-available]
Thanks,
Bhushan. -
Heterogenous connection with dg4odbc Oracle 11g: insert did not work !
Hi,
we just migrated to a 64bits version of our oracle 10.2.0.4 database.
We had a heterogenus connection who was woking "A1" at that time (in 32 bits). Now, we had some problems with the Odbc 64bits and we found on this site that we can use dg4odbc (Oracle 11g).
We tried it and it works well except for a case ... We have to refresh some Oracle tables using a Ingres database. We have a first script SQL that truncate a table and insert data from a table (using heterogenous connection) terminated by a commit. The second one do exactly the same thing but we use a PL/SQL anonymous block.
Does anybody know why the first script work and the second not ...
Here is the "log" of the execution of the first script:
D:\Logiciels\oracle\ora10g\rdbms\BIN>D:\Logiciels\Oracle\Ora10g\rdbms\bin\sqlplu
s.exe agrt997/oedec12a1 @D:\batch\script_gen\test1.sql
SQL*Plus: Release 10.2.0.4.0 - Production on Jeu. Juil. 9 14:23:59 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
SQL> set feed on
SQL>
SQL> TRUNCATE TABLE AGRBAKA1.ADMIN_LOCALE;
Table truncated.
SQL>
SQL> INSERT INTO AGRBAKA1.ADMIN_LOCALE
2 SELECT * FROM ADMIN_LOCALE@test_ron;
*49 rows created.*
SQL>
SQL> commit;
Commit complete.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64
bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
D:\Logiciels\oracle\ora10g\rdbms\BIN>
Now, the execution of the second one (who not worked !!):
D:\Logiciels\oracle\ora10g\rdbms\BIN>D:\Logiciels\Oracle\Ora10g\rdbms\bin\sqlplu
s.exe agrt997/oedec12a1 @D:\batch\script_gen\test2.sql
SQL*Plus: Release 10.2.0.4.0 - Production on Jeu. Juil. 9 14:24:32 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
SQL> set feed on
SQL>
SQL> TRUNCATE TABLE AGRBAKA1.ADMIN_LOCALE;
Table truncated.
SQL>
SQL> DECLARE
2 cpt NUMBER;
3 BEGIN
4 INSERT INTO AGRBAKA1.ADMIN_LOCALE
5 SELECT * FROM ADMIN_LOCALE@test_ron;
6
7 commit;
8 EXCEPTION
9 WHEN OTHERS THEN
10 ROLLBACK;
11 END;
12 /
DECLARE
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
*[Ingres][Ingres 3.0 ODBC Driver]Ingres API invalid handle error*
ORA-02063: preceding 2 lines from TEST_RON
ORA-06512: at line 10
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
*[Ingres][Ingres 3.0 ODBC Driver]Ingres API invalid handle error*
ORA-02063: preceding 2 lines from TEST_RON
SQL>
SQL> EXIT
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64
bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
D:\Logiciels\oracle\ora10g\rdbms\BIN>
It's strange ...
Thank's
YvesHi,
We set the HS_FDS_TRACE_LEVEL=255, stopped/started the listener, started the trace in the ODBC.
Here is the trace of the dg4odbc:
Oracle Corporation --- LUNDI JUIL. 13 2009 10:42:42.849
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- LUNDI JUIL. 13 2009 10:42:42.849
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
HOSGIP returned value of "FALSE" for HS_FDS_SUPPORT_STATISTICS
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "IngresSvrA1"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.1.0.6.0_0006, Instance:IngresSvrA1
Exiting hgogprd, rc=0
hostmstr: 2960482304: HOA After hoagprd
hostmstr: 2960482304: HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2009/07/13-10:42:42
Exiting hgolofn, rc=0 at 2009/07/13-10:42:42
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2009/07/13-10:42:42
hostmstr: 2960482304: HOA After hoainit
hostmstr: 2960482304: HOA Before hoalgon
Entered hgolgon at 2009/07/13-10:42:42
reco:0, name:AGRT997, tflag:0
Entered hgosuec at 2009/07/13-10:42:42
Exiting hgosuec, rc=0 at 2009/07/13-10:42:42
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using AGRT997 as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2009/07/13-10:42:43
HS_FDS_CONNECT_INFO = "IngresSvrA1"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2009/07/13-10:42:43
dsn:IngresSvrA1, name:AGRT997
optn:
##>Connect Parameters (len=40)<##
## DSN=IngresSvrA1;
#! UID=AGRT997;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2009/07/13-10:42:43
DriverName:CAIIOD35.DLL, DriverVer:03.50.910.0089
DBMS Name:INGRES, DBMS Version:09.10.0000
Exiting hgocont, rc=0 at 2009/07/13-10:42:43
SQLGetInfo returns for SQL_CATALOG_NAME
Exiting hgolgon, rc=0 at 2009/07/13-10:42:43
hostmstr: 2954018816: HOA After hoalgon
hostmstr: 2954018816: RPC Before Upload Caps
hostmstr: 2954018816: HOA Before hoaulcp
Entered hgoulcp at 2009/07/13-10:42:43
Entered hgowlst at 2009/07/13-10:42:43
Exiting hgowlst, rc=0 at 2009/07/13-10:42:43
SQLGetInfo returns " for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
Exiting hgoulcp, rc=0 at 2009/07/13-10:42:43
hostmstr: 2954018816: HOA After hoaulcp
hostmstr: 2954018816: RPC After Upload Caps
hostmstr: 2954018816: RPC Before Upload DDTR
hostmstr: 2954018816: HOA Before hoauldt
Entered hgouldt at 2009/07/13-10:42:43
Exiting hgouldt, rc=0 at 2009/07/13-10:42:43
hostmstr: 2954018816: HOA After hoauldt
hostmstr: 2954018816: RPC After Upload DDTR
hostmstr: 2954018816: RPC Before Begin Trans
hostmstr: 2954018816: HOA Before hoabegn
Entered hgobegn at 2009/07/13-10:42:43
tflag:0 , initial:1
hoi:0x12f074, ttid (len 28) is ...
00: 50434341 3238352E 65363738 34322E62 [ACCP.582876eb.24]
10: 2E31312E 36323031 34373639 [.11.10269674]
tbid (len 10) is ...
0: 000B0018 009CB3EA 0104 [..........]
Exiting hgobegn, rc=0 at 2009/07/13-10:42:43
hostmstr: 2954018816: HOA After hoabegn
hostmstr: 2954018816: RPC After Begin Trans
hostmstr: 2954018816: RPC Before Describe Procedure
hostmstr: 2954018816: HOA Before hoapdsc
Entered hgopdsc at 2009/07/13-10:42:43
Describing procedure AGRT997.admin_locale
Output hoada
hgopdsc, line 1222: NO hoada to print
Exiting hgopdsc, rc=942 at 2009/07/13-10:42:43
hostmstr: 2954018816: HOA After hoapdsc
hostmstr: 2954018816: RPC After Describe Procedure
hostmstr: 2954018816: RPC Before Describe Table
hostmstr: 2954018816: HOA Before hoadtab
Entered hgodtab at 2009/07/13-10:42:43
count:1
table: AGRT997.admin_locale
Entered hgopcda at 2009/07/13-10:42:44
Column:1(dir_no_direc): dtype:-6 (TINYINT), prc/scl:3/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:2(adr_no_adm_reg): dtype:-6 (TINYINT), prc/scl:3/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:3(adl_no_adm_loc): dtype:-6 (TINYINT), prc/scl:3/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:4(adl_desc_adm_loc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:5(adl_adr1_adm_loc): dtype:1 (CHAR), prc/scl:35/0, nullbl:0, octet:35, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:6(adl_adr2_adm_loc): dtype:1 (CHAR), prc/scl:35/0, nullbl:0, octet:35, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:7(adl_adr3_adm_loc): dtype:1 (CHAR), prc/scl:35/0, nullbl:0, octet:35, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:8(adl_cd_post_adm_lc): dtype:1 (CHAR), prc/scl:6/0, nullbl:0, octet:6, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:9(adl_no_tel_adm_loc): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:10(adl_no_fax_adm_loc): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:11(uti_id): dtype:1 (CHAR), prc/scl:7/0, nullbl:0, octet:7, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:12(bak_dt_dern_modif_rec): dtype:93 (TIMESTAMP), prc/scl:19/0, nullbl:1, octet:7, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:13(uti_id_uvb): dtype:1 (CHAR), prc/scl:7/0, nullbl:0, octet:7, sign:1, radix:10
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
The hoada for table AGRT997.admin_locale follows...
hgodtab, line 577: Printing hoada @ 0224711C
MAX:13, ACTUAL:13, BRC:1, WHT=6
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
-6 TINYINT N 1 1 0/ 0 0 0 20 dir_no_direc
-6 TINYINT N 1 1 0/ 0 0 0 20 adr_no_adm_reg
-6 TINYINT N 1 1 0/ 0 0 0 20 adl_no_adm_loc
1 CHAR N 30 30 0/ 0 0 0 0 adl_desc_adm_loc
1 CHAR N 35 35 0/ 0 0 0 0 adl_adr1_adm_loc
1 CHAR N 35 35 0/ 0 0 0 0 adl_adr2_adm_loc
1 CHAR N 35 35 0/ 0 0 0 0 adl_adr3_adm_loc
1 CHAR N 6 6 0/ 0 0 0 0 adl_cd_post_adm_lc
1 CHAR N 10 10 0/ 0 0 0 0 adl_no_tel_adm_loc
1 CHAR N 10 10 0/ 0 0 0 0 adl_no_fax_adm_loc
1 CHAR N 7 7 0/ 0 0 0 0 uti_id
91 DATE Y 16 16 0/ 0 0 0 0 bak_dt_dern_modif_rec
1 CHAR N 7 7 0/ 0 0 0 0 uti_id_uvb
Exiting hgodtab, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoadtab
hostmstr: 2954018816: HOA Before hoadafr
Entered hgodafr, cursor id 0 at 2009/07/13-10:42:44
Exiting hgodafr, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoadafr
hostmstr: 2954018816: RPC After Describe Table
hostmstr: 2954018816: RPC Before SQL Bundling
hostmstr: 2954018816: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2009/07/13-10:42:44
type:0
SQL text from hgopars, id=1, len=312 ...
000: 454C4553 41205443 64222E31 6E5F7269 [SELECT A1."dir_n]
010: 69645F6F 22636572 2E31412C 72646122 [o_direc",A1."adr]
020: 5F6F6E5F 5F6D6461 22676572 2E31412C [_no_adm_reg",A1.]
030: 6C646122 5F6F6E5F 5F6D6461 22636F6C ["adl_no_adm_loc"]
040: 2E31412C 6C646122 7365645F 64615F63 [,A1."adl_desc_ad]
050: 6F6C5F6D 412C2263 61222E31 615F6C64 [m_loc",A1."adl_a]
060: 5F317264 5F6D6461 22636F6C 2E31412C [dr1_adm_loc",A1.]
070: 6C646122 7264615F 64615F32 6F6C5F6D ["adl_adr2_adm_lo]
080: 412C2263 61222E31 615F6C64 5F337264 [c",A1."adl_adr3_]
090: 5F6D6461 22636F6C 2E31412C 6C646122 [adm_loc",A1."adl]
0A0: 5F64635F 74736F70 6D64615F 22636C5F [_cd_post_adm_lc"]
0B0: 2E31412C 6C646122 5F6F6E5F 5F6C6574 [,A1."adl_no_tel_]
0C0: 5F6D6461 22636F6C 2E31412C 6C646122 [adm_loc",A1."adl]
0D0: 5F6F6E5F 5F786166 5F6D6461 22636F6C [_no_fax_adm_loc"]
0E0: 2E31412C 69747522 2264695F 2E31412C [,A1."uti_id",A1.]
0F0: 6B616222 5F74645F 6E726564 646F6D5F ["bak_dt_dern_mod]
100: 725F6669 2C226365 222E3141 5F697475 [if_rec",A1."uti_]
110: 755F6469 20226276 4D4F5246 47412220 [id_uvb" FROM "AG]
120: 39395452 222E2237 696D6461 6F6C5F6E [RT997"."admin_lo]
130: 656C6163 31412022 [cale" A1]
Exiting hgopars, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoxpars
hostmstr: 2954018816: HOA Before hoxopen
Entered hgoopen, cursor id 1 at 2009/07/13-10:42:44
hgoopen, line 83: NO hoada to print
Exiting hgoopen, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoxopen
hostmstr: 2954018816: HOA Before hoxdscr
Entered hgodscr, cursor id 1 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:1(dir_no_direc): dtype:-6 (TINYINT), prc/scl:3/0, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:2(adr_no_adm_reg): dtype:-6 (TINYINT), prc/scl:3/0, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:3(adl_no_adm_loc): dtype:-6 (TINYINT), prc/scl:3/0, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:4(adl_desc_adm_loc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:5(adl_adr1_adm_loc): dtype:1 (CHAR), prc/scl:35/0, nullbl:0, octet:35, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:6(adl_adr2_adm_loc): dtype:1 (CHAR), prc/scl:35/0, nullbl:0, octet:35, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:7(adl_adr3_adm_loc): dtype:1 (CHAR), prc/scl:35/0, nullbl:0, octet:35, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:8(adl_cd_post_adm_lc): dtype:1 (CHAR), prc/scl:6/0, nullbl:0, octet:6, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:9(adl_no_tel_adm_loc): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:10(adl_no_fax_adm_loc): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:11(uti_id): dtype:1 (CHAR), prc/scl:7/0, nullbl:0, octet:7, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:12(bak_dt_dern_modif_rec): dtype:93 (TIMESTAMP), prc/scl:19/0, nullbl:1, octet:7, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
Entered hgopcda at 2009/07/13-10:42:44
Column:13(uti_id_uvb): dtype:1 (CHAR), prc/scl:7/0, nullbl:0, octet:7, sign:1, radix:0
Exiting hgopcda, rc=0 at 2009/07/13-10:42:44
hgodscr, line 521: Printing hoada @ 022470D0
MAX:13, ACTUAL:13, BRC:100, WHT=5
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
-6 TINYINT N 1 1 0/ 0 0 0 20 dir_no_direc
-6 TINYINT N 1 1 0/ 0 0 0 20 adr_no_adm_reg
-6 TINYINT N 1 1 0/ 0 0 0 20 adl_no_adm_loc
1 CHAR N 30 30 0/ 0 0 0 0 adl_desc_adm_loc
1 CHAR N 35 35 0/ 0 0 0 0 adl_adr1_adm_loc
1 CHAR N 35 35 0/ 0 0 0 0 adl_adr2_adm_loc
1 CHAR N 35 35 0/ 0 0 0 0 adl_adr3_adm_loc
1 CHAR N 6 6 0/ 0 0 0 0 adl_cd_post_adm_lc
1 CHAR N 10 10 0/ 0 0 0 0 adl_no_tel_adm_loc
1 CHAR N 10 10 0/ 0 0 0 0 adl_no_fax_adm_loc
1 CHAR N 7 7 0/ 0 0 0 0 uti_id
91 DATE Y 16 16 0/ 0 0 0 0 bak_dt_dern_modif_rec
1 CHAR N 7 7 0/ 0 0 0 0 uti_id_uvb
Exiting hgodscr, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoxdscr
hostmstr: 2954018816: RPC After SQL Bundling
hostmstr: 2954018816: RPC Before Describe Table
hostmstr: 2954018816: HOA Before hoadtab
Entered hgodtab at 2009/07/13-10:42:44
count:1
table: admin_locale
The hoada for table admin_locale follows...
hgodtab, line 577: NO hoada to print
Exiting hgodtab, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoadtab
hostmstr: 2954018816: RPC After Describe Table
hostmstr: 2954018816: RPC Before SQL Bundling
hostmstr: 2954018816: HOA Before hoxclse
Entered hgoclse, cursor id 1 at 2009/07/13-10:42:44
Exiting hgoclse, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoxclse
hostmstr: 2954018816: HOA Before hoadafr
Entered hgodafr, cursor id 1 at 2009/07/13-10:42:44
Exiting hgodafr, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoadafr
hostmstr: 2954018816: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2009/07/13-10:42:44
type:0
SQL text from hgopars, id=1, len=28 ...
00: 454C4553 2A205443 4F524620 6122204D [SELECT * FROM "a]
10: 6E696D64 636F6C5F 22656C61 [dmin_locale"]
Entered hgopoer at 2009/07/13-10:42:44
hgopoer, line 159: got native error 7 and sqlstate HY000; message follows...
[Ingres][Ingres 3.0 ODBC Driver]Ingres API invalid handle error
Exiting hgopoer, rc=0 at 2009/07/13-10:42:44
hgopars, line 278: calling SQLPrepare got sqlstate HY000
Exiting hgopars, rc=28500 at 2009/07/13-10:42:44 with error ptr FILE:hgopars.c LINE:308 ID:Prepare stmt
hostmstr: 2954018816: HOA After hoxpars
hostmstr: 2954018816: RPC After SQL Bundling
hostmstr: 2954018816: RPC Before Rollback Trans
hostmstr: 2954018816: HOA Before hoaroll
Entered hgoroll at 2009/07/13-10:42:44
tflag:1 , cmt(0):
hoi:0x12f074, ttid (len 28) is ...
00: 50434341 3238352E 65363738 34322E62 [ACCP.582876eb.24]
10: 2E31312E 36323031 34373639 [.11.10269674]
tbid (len 10) is ...
0: 000B0018 009CB3EA 0104 [..........]
Entered hgocpctx at 2009/07/13-10:42:44
Exiting hgocpctx, rc=0 at 2009/07/13-10:42:44
Entered hgopoer at 2009/07/13-10:42:44
hgopoer, line 159: got native error 7 and sqlstate HY000; message follows...
[Ingres][Ingres 3.0 ODBC Driver]Ingres API invalid handle error
Exiting hgopoer, rc=0 at 2009/07/13-10:42:44
hgoroll, line 124: calling SQLEndTran got sqlstate HY000
Exiting hgoroll, rc=28500 at 2009/07/13-10:42:44 with error ptr FILE:hgoroll.c LINE:124 ID:End transaction
hostmstr: 2954018816: HOA After hoaroll
hostmstr: 2954018816: RPC After Rollback Trans
hostmstr: 2954018816: RPC Before Rollback Trans
hostmstr: 2954018816: HOA Before hoaroll
Entered hgoroll at 2009/07/13-10:42:44
tflag:1 , cmt(0):
hoi:0x12f074, ttid (len 28) is ...
00: 50434341 3238352E 65363738 34322E62 [ACCP.582876eb.24]
10: 2E31312E 36323031 34373639 [.11.10269674]
tbid (len 10) is ...
0: 000B0018 009CB3EA 0104 [..........]
Entered hgocpctx at 2009/07/13-10:42:44
Exiting hgocpctx, rc=0 at 2009/07/13-10:42:44
Exiting hgoroll, rc=0 at 2009/07/13-10:42:44
hostmstr: 2954018816: HOA After hoaroll
hostmstr: 2954018816: RPC After Rollback Trans
hostmstr: 2954018816: RPC Before Logoff
hostmstr: 2954018816: HOA Before hoalgof
Entered hgolgof at 2009/07/13-10:42:46
tflag:1
Exiting hgolgof, rc=0 at 2009/07/13-10:42:46
hostmstr: 2956316672: HOA After hoalgof
hostmstr: 2956316672: RPC After Logoff
hostmstr: 2956316672: RPC Before Exit Agent
hostmstr: 2956316672: HOA Before hoaexit
Entered hgoexit at 2009/07/13-10:42:46
Exiting hgoexit, rc=0 at 2009/07/13-10:42:46
hostmstr: 2960150528: HOA After hoaexit
hostmstr: 2960150528: RPC After Exit Agent
If you want the "trace log" of the ODBC, I could send it to you in a further reply.
Thank's -
EPM Report/Input template & functions not working
Hello Experts,
We are working on SAP BPC 10 NW SP 04, and EPM Addin SP 16.
We have an input template/report where- in rows we have 3 dimensions and 3 in columns. In template we have used EPMDimensionoverride function for row and columns both, also extensively used EPMDimensionPropertyValues for filters of other dimensions.
We are facing different types of problems with this report:
Scenario1 – The template does not gets opened. We have “Refresh while opening the sheet” option in use. While opening this template, the refresh doesn’t happen and it says “Process in progress.Please wait”. And the Excel is hanged out totally.
Scenario 2 – In the filter part where we have used EPMDimensionPropertyValues functions. Sometimes it shows the dropdown list and sometimes not. IF we select any member in the filter, the other dropdown’s become disabled, but after refresh they are working. If the property values exceed 255 limit, we specify a range in the EPMDimensionPropertyValues function. But sometimes this is also not working. If we specify range it doesn’t populate the data also plus the dropdown created is blank. One point noticed was that when the sheet is protected it displays some dropdown lists, but when we unprotect the sheet all the dropdown’s are listed. We are facing quite weird behavior while using this function.
Research a lot on this, Tried processing all dimensions, took them offline then online, Log out from the sessions and then re- logged in. Run the program UJA_REFRESH_DIM_CACHE, but no luck!
I copied the same environment into new. and executed the template. There it is working fine! except the EPMDimensionPropertyValues function. Dont know what the exact cause is???
Regards,
PriyankaHi Priyanka,
Based on your description it's not possible to help you... You have some complex template with a lot of formulas. And you have issues. Try to isolate the issue on some simple template and provide the screenshot with the formulas explanation.
Vadim -
Report on Infoset is not working
Hi All
I was having couple of queries on one infoset which is based on 2 ODS. Later i have removed one ODS and inserted the new ODS. now when i am opening the query it is showing error for those fields which were present in old ODS which i have removed, i adjusted the query by replacing them with new char of the new ODS.
So now query should work fine but it is still giving some error. When clicking( Double click) on some row fields it is showing error message which indicates that the field has been corrupted.
Did anyone face this problem earlier, please provide some input on this issue
Thanks
Tripple kHello All
Problem is still same. Let me explain again
We were having one infoset which had 2 ODS. We developed some query on it. Later we removed one OD and inserted the new one and changed the query fields accordingly. Now we are not able to execute the query on infoset.When clicking( Double click) on some row fields it is showing error message which indicates that the field has been corrupted.
I have tried following things
1. Created a new query on infoset: Its Not working
2. Created ODS again and new query: Its not working
3. Created a MP on these 2 ODS and new query on it: Its Working
4. Created query on both ODS: Its Working
Only in case of infoset its not working.
We are in regular communication with SAP but still issue is unresolved.
Any idea ???
Thanks
Tripple k
Maybe you are looking for
-
I have a design that we want to have printed in a large banner format. We have access to one that also has a tool that will cut it out also. I was told to do this, I need to create a separate swatch color that has a special name to it. Ok, no prob
-
How to use a query in Web template
Hello i have really a very silly question. How can i use a Query that is already defined by BEX into a Web template so that i can set up simple properties like changing colours of Row as well as avoid Tab pages. I logged into a Web template. Can any
-
How to change marker size in line graphs
Hello, I'm using line graph and i show markers for the user know where to see a tooltip. I observed that the line markers are very big and clutter my graph when points are very close one anothers. I would like to make them smaller, but I don't know h
-
Change keyboard shortcuts for zoom
Hi When looking at the keyboard shortcuts for MAC, the 100% zoom is down as command alt '0', yet it is showing in the dropdown list as 'n'? Is there a way of changing the shortcuts. Previously the 100% zoom was simply command (apple) '0', which is no
-
What color correction setting is best
I just bought the Canon Pixma IP4300. I'm using a lot of ink trying to figure this out, so I thought I'd ask in case there was a default. In Advanced>Color Options>Color Correction, the choices are; 1) Driver matching 2) ColorSync 3) None Is one of t