Report bad after login but OK after refresh

Hi,
After a login, when discoverer lauch the report for the first time, it shows the same 20 lines over and over again until we refresh it. I tried launching it without conditions and sorts, but it still act the same.
Any idea what can cause this behavior ??
Thanks

It's a simple report showing a sum of all the lines in invoices, pretty standard.
Problem is the first 20 invoices keeps on repeating themselves (same No, same budget, same total, etc) for the maximum number of lines declared until a refresh is asked.
After a refresh, everything falls into place and the report is OK, meaning we now see all the invoices with no repetition whatsoever. This occurs only at login, closing and reopening of the report will show a correct report, contrary to a disconnexion, after what the problem reappears.
Sorry for being so long answering, lots of reunions lately...

Similar Messages

Refresh Webi reports automatically after BI data loads ?

Hello,
We are about to install BOE X.1 on top of BI 701.
The idea would be that the users would perform their WebI daily reporting, but obviously only after SAP BI night batch scheduling is finished, and the BI infoproviders filled.
I've read that BOE ofers you the ability to refresh the reports upfront.
We were wondering if there is a way to easily implement this logical dependance : to refresh the Webi Report only after the end of BI data loads.
There is off course, the possibility to use an external scheduler, but we have checked the licencing and it's quite expensive.
Is there another way to do so ?
Many thanks for your attention.
Best Regards.
Raoul

Hi Alan,
Thank you very much for your quick answer.
I would like to make sure that I understand you since I'm not very familliar with BOE :
First , we create an event in the CMC and connect it to a file location
Then we schedule the document and add the file event : do you mean schedule the webi report ?
Finally create the file as part of the Bex query refresh process : how exactly do we do that, in the BI process chains ?
Thank you very in advance for your help.
Best Regards.
Raoul

Indent changing is possible but changes are not reflecting after refresh

Hello all,
I am facing one issue with alignment in the BEX. i need to changed the the result rows. initally the indent is 2 , am changing it to 1 and saving as existing report. after refreshing the workbook. the changes are not reflecting. can anybody provide me some inputs on these. any help is appreciated.

Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty

After login but before I can access the internet I get a request for my login password so that - aosnotifyd - can access my login key chain. How can I get it to remember my password?

After login but before I can access the internet I get a request for my login password so that - aosnotifyd - can access my login key chain. How can I get it to remember my password?

Rephrase your question. Do you mean you keep getting login key chain errors?

Color profile changes after I login but I can't find the original profile

After I login but before everything loads, my color profile looks perfect. But then it looks like the color profile switches and everything gets a little too dark (not brightness, contrast). I go look at my color profiles and cycle through them, but nothing matches what I initially saw. I've unchecked the "Show only profiles for this display" and those don't match either. Is there a way to find out why/when/how that profile switches and what it's using before the switch?

If none of the previous suggestions work for you then try the following as a last resort:
System Preferences>Display>Display
Check the Colors & Brightness settings.
My Color setting is set to Millions which I believe is the default setting.
Now click on the Color button.
Check Display Profile
Is Show profiles for this display only enabled or disabled?
If necessary click on the Calibrate button & do the necessary.
Now in the bottom right corner, click on the purple button w/the black ? mark in the middle. This will bring up the help window.
Midway down, click on the Colorsync Utility link.
The next window should be Profile First Aid.
Read & follow the instructions/details of About Profile First Aid: & do the necessary to Verify & Repair.

After ApplyMRD Report Rows on some clients are not refreshed

hi all,
i've come across an issue regearding mr delete on some clients using ie for acess to an apex application.
a report displays a number of rows of a single table.
the user is able to check some rows.
a special button branches to an url "javascript:confirmDelete(htmldb_delete_message,'MULTI_ROW_DELETE');"a standard mrd process, using table pk, deletes the checked rows.
most of the clients work fine.
on some clients the deleted rows still appear in the report. the shown data will not be refreshed untill user logs out and logs in to the application.
i double checked that the rows are physically deleted from the table.
any idea if this is an ms ie issue and whch option has to be changed?
and no, customer can't switch to ff because of administrative policy.
regards peter

That could happen if region or page caching is enabled. If yes, disable it by setting it to never.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

500 Internal server error when loging in to Enterprise portal after refresh

Hi,
We had a data base refresh of test system with production data. After the refresh, when users are trying to log in to portal test server, they are getting error as follows:
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
I have instaled the certificate after refresh, but still getting this error. I work on SAP ECC6. Thanks in advance for your help.

Hi Bijoy,
Do you have the specific error message that the system shows when SSO is not working?
e.g. The system has received an expired SSO ticket
       Issuer of SSO ticket is not authorized
Did you do a connection test for your system connector?
You might want to check the following:
1. Time difference between portal server and ECC server
2. Parameters (e.g. login/accept_sso2_ticket = 1) in ECC have the correct value
3. User account that you are using for testing exists and is valid in ECC.
4. Portal certificate is still valid and has been added into certificate list and ACL of your ECC client (with the right SID and client number).
5. System connector settings in portal are correct.
Cheers.
Best Regards,
Zhi Liang

Universe not showing correct filters after refreshed

SAP BO XI 3.1, when i am trying to refresh data in a webi report, its giving error, Invalid prompt definition contact BO admin WI 00005.
Though i deleted all filters in Bex query, save the query, import universe, refresh univerese, save universe, export universe still webi report is showing the same error, but if all the filters are removed it shouldn't show that error?
The filters are still available in Universe, but once filters are deleted from query there shouldn't be filters in universe after refreshed.
After universe is refreshed clicked the check button it showed me 15 errors on filters with message Invalid prompt definiton, supplied XML doc is not valid.
Can any one please help me out i really need this very soon.
Thanks.

Hi,
What happens exactly after universe refresh:
<li>Filters are deleted and this is a normal behaviour?
<li>Filters are NOT deleted and this is not normal?
Can you clarify the point?
Here is a simplified description of universe refresh:
<li>Generate a new universe in memory
<li>Compare the universe to refresh and the generated universe:
<li>    Add new objects in the universe to refresh
<li>    Delete or hide obsolete objects in the universe to refresh
<li>    Update objects (that need to be updated) in the universe to refresh
<li>    Delete all filters that are based on SAP variables and regenerate them if needed
Regards
Didier

Star rating plugin in apex disappear after refresh

i used apex 4.1,oracle database 10.3,theme 21(scarlet) ,window7
i bulid report page with star rating vote as this steps
1- download star rating plugin v_1_0 from oracle
2- install plugin in application
3- Create function GET_STAR_RATING_WIDGET in my database
4- i create report to show all articles with it rating i
write this sql in Region Source
(SUBJECT_ID,
SUBJECT_TITLE,
'<fieldset style="">'||
get_star_rating_widget (SUBJECT_RATE,
5,
'QUERY_RESULT',
'QR_RATING'||ROWNUM||'</filedset>')SUBJECT_RATE,
......etc)
and now the report work good and star rating appear but the problem when press next 15 row Or Refresh the star rate Disappear and the radio buttons appear and when i rest page the star rate appear again..i don't know what the problem
if any one have any idea please advance me
thanks

hi vc Accept my apologies for late reply where in my pc.
please check this link ..this my page where the problem
http://apex.oracle.com/pls/apex/f?p=54167:1:461102053491701:::::
username:demo
password:demo
the problem the star rating disappear when press next 15 row or make sorting
i create dynamic action as:
Event:after refresh
type:region
name:Query_Result
action: java script code
code:apex.jQuery(".starrating").rating({half:true}); apex.jQuery('#Query_Result').bind("apexafterrefresh", function(){apex.jQuery(".starrating").rating({half:true});});',
and no result
i change action to pls/sql code and no result , how can create action to appear the star rating,and how detect rate column in report and get its vale and make action on it
sorry i new in apex developer and i can't solve this problem.
full function in page
thanks

VA02 (SO) exit or badi after saving SO data - urgent

Hi experts,
Please let me know the user exit or BADI after SO data saved and commited, but before all internal tables refreshed.
Advices will be rewarded.
Thanks,
Shaik Bhasha

Hi,
Check all these userexits.
                                                                                Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
Regards,
Sonika

Excel Table with SharePoint Data Connection - Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Hi Eric,
>>but it seems that by extending the table itself to encompass both the SharePoint-sourced columns and the additional columns, that an association would be created between all columns for a given row in the table, no?<<
From my understanding, the answer is no.
Another example:
I have an additional column named "Column2" and an external column named "ID" (see "before").
After I add a new record and refresh this table, Excel will keep the last row in "column2" and add an empty cell in the second last row. (See "After")
If I delete the eighth data and refresh this table, Excel will still keep the last row and remove the last second cell.
In your case, if you insert a new record in the middle of the data and refresh this table, Excel will synchronized the external data and add a new cell in the additional column in the second last row.
From my understanding, Excel will always change the second last row to suit for deleting or adding record.
Hope this helps.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

New rows become deleted from snapshot sites after refresh

Hi buddy
I am facing problem in snapshot at snapshot sites.
I have oracle 8.0.5 4 database server machines.
all servers machines have O.S windows 2000 advance server
all servers machine have same oracle version ( 8.0.5 ).
there is Site A ( Master site ) site B ( snapshot site ) Site C ( snapshot site).
snapshot has been created at all snapshots sites ( B,C and at D)
snapshot log against each table are also present at master site ( Site A )
refresh group is present at snapshot site.
these are working since feb-2002 successfully. now problem occur in these sites if some miner issues comes then it has been resolved successfully.
Replication parameter in init.ora all all sites are as follows
global_names = true
job_queue_processes = 2
job_queue_interval = 60
job_queue_keep_connections = false
distributed_lock_timeout = 60
distributed_transactions = 16
open_links = 4
snapshot_refresh_interval = 60
snapshot_refresh_keep_connections=false
snapshot_refresh_processes = 2
few days ago one problem occurs in master site A. it become crashed. we did its recovery from previous night backup ( cold backup).
Now all branches are working. but my current problem is that we have 20 tables in replication.It is a snapshot replication old version of materialized view.
when site B start refresh procedure then it show message procedure successfully completed.
it show no error message.
but when we check no of rows at snapshot site ( site b )
all new rows which were inserted at snapshot ( site b ) after previous refresh has been deleted.
mean all data which is inserted after previous refresh command has been finished. but data which is inserted at master site is present at snapshot site after refresh.
this problem is present at all the snapshot sites ( site B, Site C and site D).
database link is also present from master to snapshot site anf from snapshot to master. but problem is still suspended.
i have checked at all snapshot site and master site there is no invalid procedure or package.
there is no error message in alert file at all site.
if any body has its solution kindly told me.
thanks in advance
Abdul Hameed
[email protected]

This is still going on when the page fails the call to getCurrentRow().refresh(Row.REFRESH_REMOVE_NEW_ROWS) goes out to lunch and stops processing for the rest of the function. I tried adding a try catch around it but nothing is caught and the function still fails.
getSiteMealLogsV().getCurrentRow().refresh(Row.REFRESH_REMOVE_NEW_ROWS);
---Stops working here -----
getSiteMealLogsV().clearCache();
getDBTransaction().commit();
Jim

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

Maintain the current row position of a table after refresh.

Hi,
I use a poll to refresh tables continuously. when a table is refreshed, the current referring row is reset.
To maintain the current row position after a refresh I use the following poll method.
public void refreshTableT1(PollEvent pollEvent) {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding dcb = fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer bindings1 = (DCBindingContainer) dcb.getValue(fctx);
DCIteratorBinding dciter = bindings1.findIteratorBinding("<VOIterator>");
if(dciter!=null){
if(dciter.getCurrentRow()!=null){
Key current_row_key = dciter.getCurrentRow().getKey();
dciter.executeQuery();
if(current_row_key!=null){
try{
dciter.setCurrentRowWithKey(current_row_key.toStringFormat(true));
}catch(Exception ex) {
System.out.println("Exception in current_row_key");
}This works for normal tables well. But when I use it to master-detail tables (pair of tables) it does not.
At the master-detail tables, before the first data fetch, it works well. if we go below the first data fetch, it sets the current row into another position.
how can I overcome this...??
Thanks,
Dinuka.

Hi Mr.Frank,
I have an association in two VOs.
for example: There are 2 tables called Emp and Dept. Every Department has Employees. so there is an association (both tables have a common column). Master table is the Dept table. when you click on one record of the Dept table Detail table will show the details of the employees belongs to that selected department. That's what I referred as master-detail tables. first one is master table; second one is detail table.
When the web page loads all the table data is not fetched from the db (it will depend on the fetch size). when we scroll down the table data fetch happens again and again.
think my data fetch size is 25 rows per time.
Suppose we use mine poll method and think I have clicked on the 20 ^th^ row of table1(master table). then the table2 will display details belongs to selected department. that is OK even after refresh. that works well.
when I go to 30 ^th^ row data fetch will happen (my fetch size = 25)
when I click on the 30 ^th^ row of the table1(master table), table2 will display details belongs to selected department. but after the poll method is called the selected row at the table1 disappears and is set to another position. now the 30 ^th^ row is not in the 30 ^th^ position. but it is the selected row and table2 displays correct details.
I think you have got the problem now. :D
Thanks a lot.
Dinuka.

RFCs not working after Refresh, is this SecureStore issue?

In our landscape we do frequent system refreshes (DB copy). we use to take out RFC table export and then import them back after refresh. every thing was fine till we upgraded to Netweaver 6.0. Now after refresh most of rfc donesn't work (one which have user ID/ Password in them).
Here is my findings till now:
When we goto SM59 and RFC maintenance screen it give below message:
bold "User Password invalid for identifier /RFC/CCMS (see Long text)"
============================
This is what long message is"
Message no. SR128
Diagnosis
Changes to the global key or system data have invalidated the passwords in secure storage.
Procedure
Enter the user password again.
Procedure for System Administration
You can find detailed error messages for the specified ID in transaction SECSTORE.
======================================
In secstore transaction I found this message for entry:
"System-dependent data for entry /RFC/CCMS changed: TRS / WTH"
Long text for this is:
System-dependent data for entry /RFC/CCMS changed: TRS / WTH
Message no. SECSTORE031
Diagnosis
When accessing the secure storage, the system detected that system-dependent data (installation number or system ID) had been changed.
Entry data: TRS
Current system data: WTH
If you receive this message during a migration process, the "Current system data" field contains the old specified system data instead of the current system data.
The content of both fields can also be empty, if the system cannot determine the data in the current context.
System Response
It is no longer possible to access entries that were created with the previous data.
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 816861.
========================================================
When I check the note it talk about the system copy and migration key, release key. I don't think this is valid in our case.
Now I tried to find out the tables where secstore stores its data:
RSECACHK    Table for Controlling ABAP Programs
RSECACTB     Table for ABAP Access Authorization for Secure Memory
RSECTAB       Secure Memory: Memory for Encrypted Data
At present we backup following tables:
rfcattrib
rfcdes
rfcdoc
rfcsysacl
Please advise if anybody faces the same issue? does anybody have any solution any notes?
Edited by: Madhusudan Bansal on Oct 22, 2008 9:46 AM
Edited by: Juan Reyes on Oct 22, 2008 1:24 PM

I checked all the notes and tables. every thing is correct.
What I think wrong is when we do refresh at that time. SS (secure store) tables from source system come here! we just export and import RFCs but not SS.
All I wanted to know is If we export and import SS tables will this resolve our issue?
can you tell me have you ever did refresh for netweaver? did you face this issue?
appreciate your help

Report bad after login but OK after refresh

Similar Messages

Maybe you are looking for