Report Building - Gross Margin
I'm looking for a way to duplicate the margin analysis report in the cost management module of Oracle. However I would like to add extra information like backlog, etc. I want a report to show me all orders (open and closed). If it is open then I would like the units and revenue to be in a backlog catagory. If it is closed I want that to be in revenue catagory but I also want the COGS amount.
1 Refer to reports in PS section
PS - information systems - financials - cost/revenue - there is also a contribution margin report available
2 depends on where you have assigned the customer code - if user fields then you use structural reports like CN41 etc
if you have created the partner function then you have to run seperate reports
3 write plan values is a business transaction and can be activated by using a user status to influence (allow) this business function to happen
Similar Messages
-
Financial report with gross margin
Hello everyone,
I use BI Publisher and I wondering how to do a financial report with the gross margin
I would like to know the way to do
1. A calculation like a gross margin with a percent of the revenues.
2. How to subtract a sub-total with another one.
Does somebody has a solution, thanks?Create a metric in RPD, it increases the re usability when creating reports in Answers.
-
Require Help in developing a Report for Gross Margin
Dear Experts,
I need some inputs regarding development of Gross Margin Report for Controlling. If any body could help us in providing some inputs regarding Costing Information from CK13N or give us some contact number so that we will contact them immediately to get our doubts clarified. Please help ASAP.
Regards,
AnuHi jaya ,
whats ur Business requirement ?
Regards
Prabhu -
Report for Gross margin,Net Margin
Hi Experts,
I Want to know is there is any report
1) where i can get the Planned Cost, Planned Revenue, Contribution Margin,Gross amrgin & Net Margin.
2) Can i get the Customer code which assigned to the Project at a time for all the projects for a particular profit center/plant.
3) Where can i activate the "WRITE Planned Values" For the WBS, in order to know the changes donr in the cost planning.
Please help me to solve above issues.
Thanks & regards
Raman T S1 Refer to reports in PS section
PS - information systems - financials - cost/revenue - there is also a contribution margin report available
2 depends on where you have assigned the customer code - if user fields then you use structural reports like CN41 etc
if you have created the partner function then you have to run seperate reports
3 write plan values is a business transaction and can be activated by using a user status to influence (allow) this business function to happen -
COPA Gross Margin report Cost component roll up
Hi,
I have a question about COPA valuation using standard cost estimate and roll up of cost components in Gross Margin report.
I would like to build a simple Gross Margin Report in KE30 showing Billed quantity, Revenues and COGS split to Material, Labour and Overhead Components, but with cost components roll-up from SGH to FG.
In order to have the split of COGS I believe I need to maintain Valuation using Standard cost estimate in COPA. However, from my experience, I think that in Gross Margin reports I saw in COPA in the past - there was no cost component rollup from Semi finished to Finished products.
I mean if we sold 1 piece of FG at a price of 20 EUR and cost components for it would split into:10 - Materials, 2 - Labor,3 - Overhead (Total COGS of 15 EUR)
If this is 2-level production and this FG has SFG in its cost estimate, the SFG cost split into: 3 - Materials, 1 -Labor and 2 - Overhead
From my experience all costs of SFG used to produce that FG would go under Materials Component in Gross Margin report (312=5 from SFG would go to Material component of Sold Finished Product). Is it possible to have in Gross Margin report situation where Material Component from SFG would be rolled up to Material component in Sold Finished Product, Labor component from SFG rolled up to Labour component in FG... etc?
Regards,
KarolHi Karol
I dont think that SAP functions this way... In your eg, the Cost of SFG (321) does not roll upto to the Material cost of FG
Moreover, it is not controlled in COPA, but in Product Costing
When you define your Cost Comp Str in OKTZ, you can tick the check box "Roll up Cost Component" in each of the cost components.... Once you do this, the Overhead cost in SFG will be rolled up to the Overhead cost of FG (And Not to Material Cost of FG)...
Costing keys would simply fetch the cost estimates and transfer it to COPA.... So, set it up right at the source in OKTZ and it should be done
br, Ajay M -
Report for calculating gross margin
Hello Experts,
We need a report where we can find the gross margin .
We have wholesale and Retail where the items are set up in a way that the date goes to the same journal entry.How can we separate this and calculate the gross margin for different BP type .BP code for wholesale starts with "W" and for retail it starts "C".
Any help/suggestion is greatly appreciated.Hi,
Have you tried Sales Analysis report by customer? You can select different groups of customer by BP code.
Thanks,
Gordon -
Margin Bug in CF8 Report Builder???
Build: 193563
When I set my left and right margins to .50 inches the generated report comes out with a .25 inch margin left and .75 inch right. After a couple of hours searching the web for a solution and playing with various combinations of margins, I changed my margins to .49 inch left and .51 inch right and the report is much closer to centered on the page.
Is this in fact a bug in Report Builder CF801? Is there something I'm missing or should I look somewhere else for answers?This problem appears to be fixed in build 181436 of the
Report Builder -
Dear Expert,
Our management asked me to make a gross margin report which the report has;
Item Number
Item Name
Preferred Vendor Name
Normal Selling Price
Item Costs
Customer Name
Customer Price List
Gross Margin
The Input key was Gross Margin Start and End .
Above query need to evaluate all price list given to customer... so we know which margin to be evaluate to increase total margin of the company..
ThanksHow many price lists do you have? If you have ten or more, how the query results would be look like?
Thanks,
Gordon -
Regarding KE30 - Gross Margin report & Profit & loss report
Hi,
Can anybody give me some overview on Gross margin and profit & loss report . I would Like to know the functionality of these two reports . Please provide me some usefull links.
Regards,
Ratheesh BSthanx
-
BEx Formula Use of 'Logical And' and Calculation for Gross Margin
HI Bex gurus.
Having an odd time with what should be a simple formula to handle the display of gross margin (GM). The goal here is to display GM% properly and the requirement is as follows
If GM <= 0 then 0.0
Else
If GM > 0 and Sell > 0 then ( ( sell - cost /sell ) * 100 )
Else
If GM >0 and Sell = 0 then 100
I am familiar with bex formulas and have referenced the help docs on booleans here -
Boolean Operators - SAP Business Explorer - SAP Library
But what is odd is that if I use a calculation or a CFK in the IF, THEN with a LOGICAL AND, the formula does not report correctly
If I put in a static value, like 77, the expected logic is followed. I have tried making sure have extra parentheses and changing the order of the statement, to no avail! I could use some extra brains on this puzzling matter, so you help is greatly appreciated and will award points!
Thanks
lee lewis
Here are the formulas in text and below screen shots. Wish could copy and past formulas to and from editor!
GM%77
( ( ( 'Order GM' >0 ) AND ( Order Sell > 0 ) ) == 1) * 77 + ( ( ( 'Order GM'> 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
GM%
( ( ( 'Order GM' >0 ) AND ( Order Sell > 0 ) ) == 1) * 'REF GM%' + ( ( ( 'Order GM' > 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
'REF GM%
(order sell - order cost /order sell ) * 100 )
GM%77
GM%Shouldn't you change on of the brackets in your REF GM% ?
'REF GM%
(order sell - order cost /order sell ) * 100 )
I would put that as
'REF GM%
(order sell - order cost) /order sell * 100 )
Not sure what you mean with those red arrows... but in both cases you would be dividing by 0 (order sell = 0). -
Why is printing report different from report builder and app server
I created a report and when ran from report builder it looks fine.
And when i moved the report to server and ran the report in the browser using this url
http://192.1.1.8:7778/reports/rwservlet?userid=esp/esp_dev1@wdev&report=FMMA_VOUCHER.rdf&destype=cache&desformat=pdf
and print it the report shrinks, the fonts become small and the margins change. I am having hard time how to figure out a way to correlate the formatting in the report builder and when i run on the server using pdf format.
Is there any way to set the server so that the pdf output matches with the report builder.
Thanks.
SreeI assume you are doing a cross platform deployment
Pls read section 6.2
Resolving PDF Font Issues During Cross-Platform Deployment
in
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
--------------------------------------------------------------------------------- -
Help with Oracle Report Builder and SQL Server2000
Hey guys,
I just installed it Oracle Developer Suite10g with Report Builder and I am trying to use Report builder and wants to connect with SQL Server 2000. The problem that I am running in to is SQL Server 2000 i have is Window Authentication so Does not required to enter user name and password. So how can i connect my report builder to SQL server or is it possible to connect Report builder to SQL server?
Also, I want to create small practice version of database in Oracle how do i do it? what i mean by that is I installed trial version or Oracle developer 10g from www.oracle.com and now trying to get some knowledge with oracle. Could any one can give me some direction in this matter please.
Thank You
KeyHave a look at the reports help for the purpose header and trailer sections. Here is an exert:
"Report sectioning enables you to define multiple layouts in the same report, each with a different target audience, output format, page layout, page size, or orientation. You can define up to three report sections, each with a body area and a margin area: the names of the sections are Header, Main, and Trailer. By default, a report is defined in the Main section. In the other sections, you can define different layouts, rather than creating multiple separate reports. If you wish, you can use the margin and body of the Header and Trailer sections to create a Header and Trailer page for your reports." -
Bug in PDF generation with Report Builder CF8
Hello
there is a bug in the calculation of the left margin of a
page.
I upgraded from MX 7.02 to CF8. My "old" Reports worked fine,
but when I export them to PDF an print them the left margin is
different.
I'm using metric settings in the Report Builder. I created a
new Report with Left Margin 2 cm and a single Field with the left
Property = 1 cm (0.9879 cm). The printed paper with these poperties
where fine. I could measure appoximatly 3cm . But if I use Report
Left Margin = 1.27 cm and Field left Property = 0.35cm. The left
margin of the printed paper is only 1.1cm.
So it depends on the choosen Values of report left margin and
the left property of a field.
Does anybody else have the same problem?I found this posting as I have now "rediscovered" this issue. I came to the same conclusion - edit ALT TEXT for every image.
However, I think it is confusing that these paths of image file are not considered Personal Information that can be removed using the Inspect Document feature (I tried - was not successful). The list of things to be removed using this wizard is quite extensive
- and some of them less visible than these file paths.
It would be interesting to know if this is going to change with future updates of Word. Why is an ALT TEXT included at all per default? I think using the file path in ALT TEXT should be made optional. Is there a way to turn off this default embedding of
the full path?
As the OP I also used Office 2013 on Windows 7 64bit.
Elke -
Cfreport cutting off lines on multiple pages created with report builder
I have a report built with report builder and it appears that if you set the body to "stretch with overflow" that cfreport will "cut off" a line or two every time it paginates see attached for a simplified version of the report, I have removed all but the body on this (actual report has a watermark, report header, page header and page footer ...the problem is pretty apparnt with this scaled down version as you can see it's missing text from one page to the next ..any ideas/suggestions/known bug?? You can see a sample of the issue here: http://www.arroyoc.com/onlybody.pdf
Hi Helen,
As per my understanding, I think this issue is caused by width size is not appropriate in the report. To narrow down this issue, please make sure that Body Width + Left margin + Right margin <= (Page width).
If the tablix is a matrix, because of the column group can expand to multiple columns, we should according to the following rule:
Body Width + Extra expanded column width + Left margin + Right margin <= (Page width).
Besides, please make sure there are no extra page breaks before each “R”. To check whether the issue is caused by the letter “R”, we can try to use another field to replace the Company Name field.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
CF Report Builder 9: Dynamic Footer Band Height
Problem:
I have a coldfusion (.cfr) and need to be able to either set the height of the footer band or set the bottom margin so that the report can be printed onto custom paper which has pre-printed information in at the bottom of the page.
Can this be done:
Is it possible to programically set the Footer Height in report builder or even have the footer band expand with its contents. There are options there called Stretch with Overflow but these don't appear to work on this band.
Or
Is is possible to programically set the bottom margin of the report for all pages when I am calling it from coldfusion 9
<!---Create Report--->
<cfreport template="../reports/reportFile.cfr"
style="mystyle{ defaultStyle: false; font-family:'Arial'; color: ##000000;}"
format="#reportFormat#"
query="#reportQ#">
<cfreportParam name="lblTitle" value="#reportTitle#">
</cfreport>
I cannot figure this out. Someone please help!Another developer on my team sent me a report that worked and
I noticed that I had set the Print Order to horizontal when I was
trying to fix another issue. Changed it back to vertical and it
works fine. Not sure why that should have mattered, but it works.
Maybe you are looking for
-
At a loss with phone line and broadband
Hi, First of all, sorry for cross posting this, but as you might gather I'm currently stuck between a rock and a hard place. http://community.bt.com/t5/Phones/At-a-loss-with-phone-line/td-p/54639 I'm not going to repeat everything in that post, just
-
Mail for exchange settings on N97
I have a N97 which mail for exchange was working happily on, synchronizing mail, contact's and calendar. The world was a good place! The screen broke and needed replacing on my N97 and I have set up mail for exchange again. Now when it downloads ma
-
How can i create an event from a cell of JTable ?
Hi , I am having a JTable which has two types of render : checkboxCellRender and DefaultTableCellRenderer i want to generate an event by clicking the checkbox which will do color changes for other cells . How can i do that ? Can i pass the events ? c
-
Activation failed due to sructure generation error.-URGENT
i tried to check in an activity but activation failed due to the foloowing error:PLEASE HELP VERY URGENT Development Component Build (2008-03-14 10:09:20) Component name: tablist Component vendor: worldbank.org SC compartment: worldbank.org_GDB
-
Troubleshooting the lockwaits for parallel processing jobs
Hi Experts, I am facing difficulty tracing the job which is interfering with a business critical job. The job in discussion is using parallel processing and the other jobs running at the time are also using the same. If I see a lockwait for some proc