Report COOIS Field string text change

Dear all ,
I have found the report RCOTX000 to change the text in field string in order information sytem report , well I want to change some field label text in the report COOIS / COOISPI ,so I try with the help of RCOTX000 but it is not changing the field text . Is there any other setting required for this or there is no way for changing the field text ?
Please help me out from this issue.
Thanks
Rajesh

Dear,
Please refer the OSS Note 363327 and 395258.
Regards,
R.Brahmankar

Similar Messages

FI Report Description to long text

hi Gurus
I wanted to change FI report description to long text but some how it is picking up medium text only.
I have tried all options like: Header text legnth, report lay out, elements text change , row coulmn text change and even definition.
Please guide how can i change this.
Regards
Hiren
Edited by: Hiren Mazumdar on Sep 7, 2011 10:08 AM

Do obtain text from table STXL you can use FM: READ_TEXT.
Get the entry from STXL that you are requiring and get the text using this FM.
thanks.
JB

How to change crystal report data field at runtime ?

Hello everyone,
I have a Crystal Report file ,which i am using to generate report for my windows form project .
In that report i have a filed called as Quantity which data type is set as decimal, the requirement is like that the number of value those comes after decimal point that should be set according to the value which is given by the user at the run time .
For eg: If user gives 1 at the run time then the report Qty field value set one value after decimal point. Like 12.1
if user gives 2 then Qty field the value is 12.22 like tat but user can give from zero to any number.. and if it is zero it should not show decimal
Note: The main idea hear is how to change the filed in Crystal Report decimal point value by using code(or we say writing code we need to set manually as user input it will change)
Can any body help me how to solve this issue .
S.K Nayak

I think you could probably make the field you see a formula field and take a parameter as the number of decimal places.
totext converts a number to a string.
totext({decimalField}, 2)
That's 2 decimal places.
You could probably substitute a {parameter} for that 2.
If not then you could substitute an entire formula.
To explore formulas:
foreach (FormulaFieldDefinition f in rpt.DataDefinition.FormulaFields)
MessageBox.Show(f.Name);
// f.Text = your new formula
Where rpt is an instantiated report.
Or add another string field which you display in the column and do the calculation with the original decimal.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

Can't add database field or text object to a report (new and existing)

We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report. I get a prohibition symbol (circle with a backslash inside it) when I hover over the report. Has anyone encoutered something like this? Any suggestions? Thank you.

Do you have two monitors?
I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
Ian

Trying to Add IBAN Field to Vendor Changes Report

Hi,
I need to add IBAN field to vendor changes report (S_ALR_87012089).
These are the steps I took:
1) Go to OBAT and add new field group
2) Go to OBAU and add new fields to field group created in (1)
However, TIBAN fields cannot be added to the field group.
Are there any workarounds?
Thanks.

No solution except customization

How to change string text in xaml

I have string text in ListPickerItem like this
<toolkit:ListPicker x:Name="items" FullModeHeader="Items" Background="White" Margin="10,280,14,0" VerticalAlignment="Top" Foreground="Black" FontSize="25.333">
<toolkit:ListPicker.Header>
<TextBlock x:Name="Choose_Items" Opacity="0.8" Text="Choose Items" Foreground="White"/>
</toolkit:ListPicker.Header>
<corelib:String>item1</corelib:String>
<corelib:String>item2</corelib:String>
<corelib:String>item3</corelib:String>
<corelib:String>item4</corelib:String>
<corelib:String>item5</corelib:String>
<corelib:String>item6</corelib:String>
<corelib:String>item7</corelib:String>
<corelib:String>item8</corelib:String>
</toolkit:ListPicker>
So in code I want to change this text by the resource each string have another value like this
And the code is
Public Shared Iterator Function FindVisualChildren(ByVal obj As DependencyObject) As IEnumerable(Of DependencyObject)
If obj IsNot Nothing Then
For i As Integer = 0 To VisualTreeHelper.GetChildrenCount(obj) - 1
Dim child As DependencyObject = VisualTreeHelper.GetChild(obj, i)
If child IsNot Nothing Then
Yield child
End If
For Each subChild In FindVisualChildren(child)
Yield subChild
Next
Next
End If
End Function
Private Sub Change()
Dim rm As New ResourceManager("App.Resource1", GetType(MainPage).Assembly)
Dim main As Grid = ContentPanel
Dim result = FindVisualChildren(main)
Dim ST = result.OfType(Of String)()
For Each item In ST
item = rm.GetString(item.Text)
Next
End Sub
So How I can make right code to run like this problem ??
Thanks :)

Hi Shay Boshra,
Based on your description, it seems that you want to change the ListPickerItem content based on the resource file, if I do not misunderstand you, an easy way to implement it is that first you can define the ListPicker as following:
In the MainPage.xaml:
<toolkit:ListPicker x:Name="items" Background="White" Margin="0,-11,24,0" VerticalAlignment="Top" Foreground="Black" FontSize="25.333">
<toolkit:ListPicker.Header>
<TextBlock x:Name="Choose_Items" Opacity="0.8" Text="Choose Items" Foreground="White"/>
</toolkit:ListPicker.Header>
<toolkit:ListPickerItem Content="item1"></toolkit:ListPickerItem>
<toolkit:ListPickerItem Content="item2"></toolkit:ListPickerItem>
<toolkit:ListPickerItem Content="item3"></toolkit:ListPickerItem>
<toolkit:ListPickerItem Content="item4"></toolkit:ListPickerItem>
<toolkit:ListPickerItem Content="item5"></toolkit:ListPickerItem>
</toolkit:ListPicker>
<Button Content="Change Text" HorizontalAlignment="Left" Margin="20,446,0,0" VerticalAlignment="Top" Click="Button_Click" Width="299"/>
In the MainPage.xaml.cs:
Private Sub Button_Click(sender As Object, e As RoutedEventArgs)
Dim ResourceManager As New ResourceManager("App.Resource1", GetType(MainPage).Assembly)
For Each listpickitem As ListPickerItem In items.Items
listpickitem.Content = ResourceManager.GetString(listpickitem.Content.ToString())
Next
End Sub
The result:
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change report region fields in read only mode?

How to change report region fields in read only mode?
skud.

add the following javascript fuction to page header(or Javascript function and variables section)
function disableItems(pRegionStaticId,pDisableFlag) {
$('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
if( $(this).attr('name').match(/f[0-9][0-9]/) ){
return $(this);
}).attr('disabled',pDisableFlag);
pRegionStaticId is the region's static Id+
Note that this code specifically disables only application arrays. Disabled items are not available after submission (and hence are different from readonly) . But any page javascript can modify disabled or readonly items(client side), so you must check at the server side to validate the data.
You can disable items using
disableItems('MY_REGION_ID' ,true);and enable them by passing false
disableItems('MY_REGION_ID' ,false);

Add storage location field into report COOIS

When i check the Production order Storage Location is showing under Goods receipt Tab.When i execute the order COOIS Storage location field is empty.
Where and what to configure to pull storage location into report COOIS?
Thanks
Rafi

Hi Mohammed,
Ideally it should come, field storage location is fetch from the GR tab from production order. May be PP guy can help you much better.
Regards
Mohit

Matrix report - row field text extends into cell field's display space

The horizontal elasticity of the row field in the matrix is set to VARIABLE. This row field's horizontal elasticity needs to be VARIABLE (not FIXED).
However, this causes problems because if the row field's text length is long, the matrix does not change accordingly, i.e. the cell field does not move to the right to make room for the row field. So the row field extends into the display space of the cell field, and the text of the row and cell field overlap, and so the text is almost impossible to read (as well as ugly).
I have tried to put a frame around the row and cell field so that they are together and move accordingly, but this hasn't helped. I have also tried anchors but they cause the fields to appear NULL when they are not.
Any help is appreciated.
-nelson
[email protected]

I think you'll need to revert to a fixed sized field and increase the height of the field to cope with the number of rows that you could have.
You might be able to create a repeating frame above the matrix that tracks the matrix and pushes the whole matrix down as it expands, but I don't see how you could do this within the matrix structure itself.

Changing Field Labels texts: What happens after Upgrade?

Hi All,
my client would like to change some field label text of domains.
The question I have is, what will happen after change of release? Will the texts be overwritten? And all have to be maintained again?
Will I know which ones have been overwritten (SPAU)?
Any comment, suggestion, experience?
Thanks in advance!
thomas

Hello,
Guess your question refers to field label texts of datatyps - because domains have only the technical data definition. Anyway - all modifications of Data Dictionary elements ( domains, datatyps, tables) are handled by transaction SPDD during upgrades. The difference to transaction SPAU is, that transaction SPDD is used during the upgrade - after the 'Test'-phase and before the 'Import'-phase.
Have a look on the documentation of SPDD- it's quite good.
Regards Wolfgang

Script to search all files in specified folder for multiple string text values listed in a source file and output each match to one single results txt file

I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.

I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if

Re: Problem in ALV reports using Field symbols

Hi Friends,
Can you tell me how to convert a normal report using field symbols into ALV report
can ypu please suggest me any solutions.I am sending the code along with this mail.
Regards,
Dinesh
<b>Coding:</b>
*& Report YSDBTEMP                                                    *
REPORT YSDBTEMP                                .
tables: ekko , ekpo .
TYPE-POOLS: SLIS.
*Internal Table Declaration
data: begin of line ,
      ebeln like ekko-ebeln , "Purchasing Document No.
      bedat like ekko-bedat , "Purchasing Document Date
      matnr like ekpo-matnr , "Material No.
      netwr like ekpo-netwr , "Net Order Value in PO Currancy
      meins like ekpo-meins , "UOM
      change like ekpo-menge ,
end of line .
*Internal table Declaration
DATA: IT_final like table of line with header line.
DATA : FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV with header line.
DATA : V_REPID TYPE SYREPID.
DATA : IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
data : i_layout type slis_layout_alv .
Header for Main Grid Display
data:i_header1 type slis_t_listheader with header line.
Header for Interactive Report Display
data:i_header2 type slis_t_listheader with header line.
*Field Symbol declaration.
FIELD-SYMBOLS: <FS> type any table.
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
start-of-selection.
perform get_data.
perform field_cat.
perform layout using i_layout .
perform grid_display .
*&      Form get_data
      text
--> p1        text
<-- p2        text
FORM get_data .
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
ENDFORM.                    " get_data
*&      Form field_cat
      text
--> p1        text
<-- p2        text
FORM field_cat .
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
   append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'Purchasing Document Date'.
fieldcatalog-col_pos = 2.
   append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 3.
   append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Net order'.
fieldcatalog-col_pos = 4.
   append fieldcatalog .
clear fieldcatalog.
ENDFORM.                    " field_cat
*&      Form layout
      text
     -->P_I_LAYOUT text
FORM layout USING    P_I_LAYOUT.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_tabname = 'IT_FINAL'.
ENDFORM.                    " layout
*&      Form grid_display
      text
--> p1        text
<-- p2        text
FORM grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
*IT_EVENTS = I_EVENT[]
TABLES
t_outtab = <fs>.
endform.

Hi,
This is one sample program,
Check this.
I hope it is helpful to you.
TABLES : zeastable_02,zeastable_04.
TYPE-POOLS : slis.
TYPES : BEGIN OF fieldst,
        name LIKE zeastable_02-name,
        znum LIKE zeastable_02-znum,
        empno LIKE zeastable_04-empno,
        zempsalary LIKE zeastable_04-zempsalary,
        END OF fieldst.
DATA itab TYPE TABLE OF fieldst WITH HEADER LINE.
DATA: w_report_id LIKE sy-repid.            "Program name
DATA: w_title   TYPE lvc_title VALUE    'Assignment 1 in ALV'.
DATA: w_layout   TYPE slis_layout_alv.      "Layout setup
DATA: w_fieldcat TYPE slis_t_fieldcat_alv. "Field Catlog
START-OF-SELECTION.
SELECT-OPTIONS employee FOR zeastable_04-empno.
SELECT zeastable_02name zeastable_02znum
       zeastable_04empno zeastable_04zempsalary
       INTO CORRESPONDING FIELDS OF TABLE itab FROM
       zeastable_02 INNER JOIN zeastable_04 ON
       zeastable_02name = zeastable_04name
       WHERE zeastable_04~empno IN employee.
w_report_id = sy-repid.
PERFORM i_layout CHANGING w_layout.
PERFORM i_fieldcat CHANGING w_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program                = 'ZEASALV_04'
     i_grid_title                      = w_title
     is_layout                         = w_layout
     it_fieldcat                       = w_fieldcat
     i_save                            = 'A'
    TABLES
      t_outtab                          = itab
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM i_layout CHANGING w_layout.
PERFORM i_fieldcat CHANGING w_fieldcat.
*&      Form i_layout
      text
     <--P_W_LAYOUT text
form i_layout changing p_w_layout.
clear w_layout.
w_layout-colwidth_optimize = 'X'.
w_layout-edit = ' '.
endform.                    " i_layout
*&      Form i_fieldcat
      text
     <--P_W_FEILDCAT text
form i_fieldcat changing p_w_feildcat.
data: l_line_fieldcat type slis_fieldcat_alv.
clear l_line_fieldcat.
l_line_fieldcat-fieldname = 'NAME'.
l_line_fieldcat-ref_tabname = 'itab'.
l_line_fieldcat-seltext_m = 'NAME'.
l_line_fieldcat-key = 'X'.
   append l_line_fieldcat to w_fieldcat.
clear l_line_fieldcat.
l_line_fieldcat-fieldname = 'ZNUM'.
l_line_fieldcat-ref_tabname = 'itab'.
l_line_fieldcat-seltext_m = 'NUMBER'.
l_line_fieldcat-key = 'X'.
append l_line_fieldcat to w_fieldcat.
clear l_line_fieldcat.
l_line_fieldcat-fieldname = 'EMPNO'.
l_line_fieldcat-ref_tabname = 'itab'.
l_line_fieldcat-seltext_m = 'EMPLNUM'.
*l_line_fieldcat-key = 'X'.
append l_line_fieldcat to w_fieldcat.
clear l_line_fieldcat.
l_line_fieldcat-fieldname = 'ZEMPSALARY'.
l_line_fieldcat-ref_tabname = 'itab'.
l_line_fieldcat-seltext_m = 'SALARY'.
*l_line_fieldcat-key = 'X'.
append l_line_fieldcat to w_fieldcat.
endform.                    " i_fieldcat
Reward for useful answers.

BEX REPORT:DATE FIELD THROWING "X"

Hi,
We have a report which is being executed on an infoset.The data is being pulled from ECC and SRM systems.There are primarily 2 issues with this report
1)Purchasing Group descriptions are not being pulled.Instead an abbreviation is being seen in the report.It looks like currently ony short description is being pulled.Is there a way to pull the long description/medium description for this particular infoobject "Purchasing Group ".Please advise on this issue.
2)We have date fields, SC create date(Shopping cart),First Approval date and Last Approval date and Requested Delivery date in the report.
But the issue is First Approval date and Last Approval date fields are throwing up"X" in the report.Also,Some times ,it appears that ,the date field is being populated in the underlying ODS but in the report ,it is throwing up"X"
Also, some information on the date fields at infoobject level.
The date field is defined as a keyfigure
Type/data type is Date
Data Type is u201CDEC-Counter or amount field with comma and signu201D
But whether it should be u201C DATS Date field (YYYYMMDD)stored as char(8) .
Please provide some resolutions to work around this particular issue.
If you require further information,I will provide it.
Thanks,
Amar

Hi Amar,
As far as 'text' is concerned, check the following changes.
-ensure that medium or long text is maintained for that field.
-in Bex, under th display tab for that field, select 'text view' as Medium length text or Long length watever is maintained. (its standard by default).
this should solve your text problem.
Regards,
Pritesh

Custom report #value.FIELD# issue

I've created a report using the custom report layout option. This type of report has field tags #column_name.LABEL# in the heading section and #value.FIELD# in the Body section.
The layout of my report requires that some of the values, #value.FIELD# , be in the heading HOWEVER when I place them there they are returned literally. Values are only substitued when I place them in the Body section.
AND
If I place #column_name.LABEL#'s in the BODY section they are repeated for every row returned. How can I get the #value.FIELD# to return values in the HEADER section?

Dear All,
I have checked that for the company code which has COPA value field as zero there is no settlement posted in c088.
For other company codes there are postings on date 30.11.2010 but for this company code there is no poating on date 31.12.2010.
When I am executing co88 in test run its says:
Invalid posting period (please check your entry)
Message no. CK122
Diagnosis
You are attempting to update in a period that is locked against posting. This error can occur when you attempt to post to a period that is in the past.
Procedure
You can allow posting to the prior period in Materials Management. Choose Logistics -> Materials management -> Material master -> Other -> Post to previous period and activate this function for your company code.
If the posting is to be neither in the current period nor in the previous period, then you cannot change any stock data (such as goods movements, purchasing postings, invoice entries, or settlement to materials) because stock data can only be updated in two periods. Possible entries:
the current period in the material master record
the previous period
the last period of the previous fiscal year
Please suggest on the reason ofl error in order settlement how can I rectify
Regards
Raju

DIFF: Field string ,Structure and Internal table declaration

Hai,
       what is the diference between Field string ,Structure in ABAP program and Internal table declaration and how it will work ?
Thank you
ASHOK KUMAR.

hi,
Look this u will get a good idea.
*& Report ZTYPES                                                      *
REPORT ZTYPES                                                  .
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line)
Regards
Reshma

Report COOIS Field string text change

Similar Messages

Maybe you are looking for