Report Desinger: Binding error for characteristic / Key Figure
Hi,
I am getting the error "Binding error for characteristic: Reference to characteristic".
I have created a report using a query and I have to change the query as per requirement, removed a characteristic.
Now when I execute a report, getting Data binding error.
Does system not changes the report if we change the provider query?
How can this issue be handled apart from deleting existing report and creating a new one?
Appreciate your help in advance.
Regards,
Amit
Amit,
First, try doing a save as on your report and save it under a new name. Delete the old one, then re-save it as the same name as before. Then, go in and clear cache so that it will re-build all references in the query. This should remove the error and you won't have to rebuild anything.
Cheers,
Rusty
Similar Messages
-
BEx report -two different calculations for a result for one key figure how?
All,
Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
Here is an example:
location product inventory
AAAA 11111 5
AAAA 11111 5
AAAA 11111 10
AAAA 11111 10
AAAA Result 7,5 ---> average
AAAA 22222 5
AAAA 22222 6
AAAA 22222 7
AAAA 22222 8
AAAA Result 6,5 -
> average
AAAA Result (across products) 14 ---> here I want to have a sum of averagesThis could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.
-
Report Designer - Binding Error
Hi Guys,
I am trying to use the report designer to build some reports. When I assign any dataprovider to my report - query/query view, I am getting an error "Binding Error for Characteristics"/"Binding Error for Key Figures". Can you please let me know if someone has faced this error and what can be the possible resolution. This is kind of urgent because none of the queries seem to work. We are on SPS 9 which I know is not the best.
Thanks,
Pratik.is it an DROPDOWN you trying to add dataprovider??
Hope it Helps
Chetan
@CP.. -
IP: Best Practice for capturing Key Figure input value in characteristics
Hi Gurus,
we have the requeirement to capture a plannable key figure as a characteristic as well for reporting reasons.
Input in the key figures will be a closed value ist (1 to 5) so no new master data will be created by that in the respective characteristics.
My first guess was an exit characterisic relationship, but obviously it is named "Characteristic Relationship" for a reason, as you cannot not derive values from key figures here.
Any ideas on what would be the best and easiest implementation scenario?
Many thanks in advance,
TobiasHi Tobias,
You can derive a characteristic value from a keyfigure using Characteristic relationship of type "EXIT".
Kindly let me know if your issue doesn't get solved using the EXIT type char rel.
EXIT type characteristic relationship:
The valid characteristic combinations and derivable characteristic values are defined by the customer-specific implementation of the specified exit class.
The exit class must implement the interface 'IF_RSPLS_CR_EXIT'. Only these types of classes are offered for editing in maintenance. We recommend that you derive your own class from the example class 'CL_RSPLS_CR_EXIT_BASE'. You then only have to implement the methods u2018CHECKu2019, u2018DERIVEu2019 and u2018CREATEu2019. The class 'CL_RSPLS_CR_EXIT_BASE' itself can be used directly, but it does not execute an action.
Note also the example source code given in the template class; an infrastructure for buffering is provided there, for example.
Regards,
Balajee -
Add a comment to a query cell (Characteristic / Key Figure Combination)
Hi Gurus
Essentially we are attempting to allow users add a comment to a number they enter in an IP planning screen.
The issue we have is that when we add the comment using the standard right click functionality it is stored against the basic key figure, not the characteristic/key figure combination. This means that the same comment will appear everywhere that key figure is used.
Is there a way to make comments specific to characteristic/key figure combinations so that they would show against only that cell?
Thanks
GarethHello,
have you tried the GRID reporting. if the structure of your report is fix you can use a formular for each cell.
In we reporting you have the possibility to change the output of the report with the web table interface (user exit)
I have no other idea.
reg.
Michael -
Exception aggregation for calculated key figure
Is it possible to have exception aggregation for calculated key figure in BW 3.5? As per Note 1151857, it is possible, however this note applies to BI 7.0.
As per note 152638, it is possible in older version only simple ckfs like 'CKF = Base key figure'.
Is there any workaround to define exception aggregation for complex CKFs in BW 3.5?
My requirement is like this -
CKF = (sales quantity - forecast) %share (sales quantity).
Aggregation for CKF over time should be sum whereas, for all other characteristics calculation of CKF should be done after aggregation(normal scenario).
So, defining exception aggregation of CKF as 'Summation' over time should fulfil my requirement.
I can not use calculate result as 'summation' setting for CKF because of following design of report.
Report contains structure(characteristic)
Elements of structure are -
Last 3 months(April - June)
Last 3 months - 1 (Mar - May)
Last 3 months - 2 (Feb - Apr)
and so on...
When data is aggregated for each element of structure, base KFs will be aggregated and calculations will be done on that.
Changes in the backend are also not possible because, normal aggregation of CKF-alike in backend will be summation for all characteristics.
Is there any way in BW 3.5 to model such a scenario?
Thanks and Regards,
Anup KulkarniSum of individual values of CKFs is not same as the Calculation on 'sum of basic key figures(result of basic key figures)'. - Yes, you are right.
I need to aggregate CKF over time as SUM. However, calculation for result of all other characteristics should be based on results of basic key figures and not the 'Sum of individual values of CKF'. -
What i understood is that whenever the time char is in row, then result should be simple on the sum what ur getting but when other char are there then it should go for calculation based on the sum of key figure.
If im not wrong in getting ur point.
How can two differenct activites be perofrmed on same key figure depending on the characteristic .....!. For this u have to think some other possibility or let somebody else update the thread. -
I have created a banded report split into departments. Each
recore has a value associated with it. The report runs fine if I
dont try to sub-total each departments vale, but if I add a
calculated field to the banding, I get the following error:
Report data binding error Error evaluating expression :
textField_2 Source text : calc.Department_Total.
Variable calc.Department_Total is undefined.
The calculated field is simply the sum of the values, with an
initial value of 0 and set to reset when the group changes on the
department. I am using the same data type for the calc field as it
automatically gave for the original Value field (Big Decimal)
Any ideas?
Dave HDoes anyone have any ideas about this, Its getting a bit
critical now. Has anyone else been able to do sums that calculate
on group changes?? The sum total works for the report, jusyt not
the bands. I desparate here, pulling my hair out.
Regards
Dave H -
Currency Translation for Calculated Key figures
Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k -
Report data binding error unknown column name
Hi,
I am having a problem with the new 7.02 update of Report
Builder. The issue is it's not finding my SQL query.
I have wrote my query initally in the advance mode, and it
doesn't seem to reconize it. Is there an issue with this?
I did manage to fix one of my reports by using the basic mode
and selecting all my tables and seting my linkage and criteria.
I have other computers that i have not updated to 7.02 and
they do not have this issue. Below is the error:
Error Occurred While Processing Request
Report data binding error Unknown column name : work_phone.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0;
.NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 127.0.0.1
Referrer
Date/Time 13-Jul-06 02:33 PM
Stack Trace (click to expand)
coldfusion.runtime.report.Report$ReportDataBindingException:
Report data binding error Unknown column name : work_phone.
at
coldfusion.runtime.report.Report.runReport(Report.java:420)
at
coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:96)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:106)
at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:157)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at
org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
This report works in 7.01. So all query variables match with
a variable in the SQL select statement.
Anyone have any Ideas??
Thanks,
DanielThank you very much for help.
The "Unknown column name " is a field still used in my
report, so I can't remove it.
After I clear the query in the report and reopen the report
and apply the same query back to it, I get different error message:
Element TASKNUM is undefined in QUERY.
The error occurred in : line 1
-1 : Unable to display error's location in a CFML template.
I know for sure this "Element TASKNUM is undefined in QUERY."
is defined in query. each time it complains something different. I
get really confused.
Thanks again.
Yueming -
Report data binding error with date values
I have CF7.02 with a Microsoft Visual FoxPro 9.0 SP1 Database
that I connect to using ODBC (FoxPro Driver 6.01.8630.01). I send
my sql results to a CF Report Builder 7.02 PDF report and it works
fine. If I dump the date values before I change them, they look
like the following: {ts '2004-12-20 00:00:00'} . However I have
tried a number of ways of manipulating the date before sending it
to the report, but I continue to get errors. I don't care what
format they go to the report in, since the report reformats them
anyway. I checked to make sure that none of the dates were null.
For example <cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDateTime(#ldCFPrcInputDate#) /> yields values in the
{ts '2004-12-20 00:00:00'} format when I dump the query results to
screen. Where:
ldCFPrcInputDate = 12/20/2004
CreateODBCDateTime(ldCFPrcInputDate) = {ts '2004-12-20
00:00:00'}
ReportQuery.PrcInputDate[lcCurRow] = {ts '2004-12-20
00:00:00'}
I get the error:
Report data binding error Unable to get value for field
'prcinputdate' of class 'java.util.Date'.
coldfusion.runtime.OleDateTime -> Date
Not using the CreateODBCDate function for example <cfset
ReportQuery.PrcInputDate[lcCurRow] = #ldCFPrcInputDate# /> I
get:
Report data binding error Unable to get value for field
'prcinputdate' of class 'java.util.Date'.
java.lang.String -> Date
Here are some of my failed attempts:
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDateTime(#ldCFPrcInputDate#) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
#ldCFPrcInputDate# />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
DateFormat(CreateODBCDate(#ldCFPrcInputDate#),'mm/dd/yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm/dd/yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm-dd-yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
Trim(createODBCDateTime(ldtmpdate)) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate({05-07-2006}) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate('{05-07-2006}') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(05/07/2006) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate('05/07/2006')/>
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(parseDateTime('05/07/2006')) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
parseDateTime(CreateODBCDateTime(05/07/2006)) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
parseDateTime(CreateODBCDateTime('#ldCFPrcInputDate#')) />
<cfset ReportQuery.PrcInputDate[lcCurRow] = '{05-07-2006}'
/>
<cfset ReportQuery.PrcInputDate[lcCurRow] = '{05/07/2006}'
/>
<cfset ReportQuery.PrcInputDate[lcCurRow] = '05/07/2006'
/>
I also did some googling without success. Any help is
appreciated.You may want to make sure that the column is not included in
the query variable list in your report cfr file.
The newest version of the Report Builder, which may be
installed on the server, no longer tolerates vars appearing in that
list of they are not in the query itselft. -
Property u201Czero allowedu201D must be identical for all Key Figures.
I am having the following error message when trying to run a Statistical Forecast in the Background. The job cancels out and I receive the error message: Property u201Czero allowedu201D must be identical for all Key Figures.
When I look in RSA1 under Key Figures Details "zero allowed" appears to be checked for all Key Figures. Can anyone point me in the correct direction I've already tried searching and did not find the answer.
Thanks.HI,
The setting is not in RSA1 but is in /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network Planning
choose the relevant Planning area right button click on the Planning area choose change key figure settings. From here you can check the flag Zero allowed for the key figure that Stat. FCST is generated.
Best Regards,
Ivo Stoyanov -
Calculate total and average for same key figure
Hi Experts,
I have a requirement where I need to calculate total and average for same key figure no of employees.
eg:
If I enter 03,2009 as Input the reuslt should give from financiual year starting to current month.
11.2008 12.2008 1.2009 2.2009 3.2009 average
11 10 12 10 10 10.6
10 10 11 12 10 10.6
total 21 20 23 22 20 21.2
we have only one characteristic in rows... companycode.
Waiting for your Inputs.
Regards
Prasad Nannurino it will work for u
you have to use variable on 0calmonth or fiscal period depending on what Time characteristic u are using.
lets say that variable is zcalmonth
it is based on 0calmonth for e.g.
now u restrict keyfigure with this variable zcalmonth with time char. = 0CALMONTH
copy and paste the restricted keyfigure
now set offset for variable in variable selection screen dialog box = -1
repeat this until u want
make this variable mandatory
now at query execution user will select any value for month/year
and u will see all 5 months in result set
now there can be maximum 12 months in a year, so u end up creating only 12 restricted keyfigures.
use YEAR in restricted keyfigure too, and restrict it with YEAR VARIABLE processing by CUSTOMER EXIT = CURRENT YEAR
in this case it will automatically removes any additional values...
for e.e.g
YEAR = 2008 only
User entered 6/2008
so lets say ur financial year starts in april 2007 and ends in april 2008
so u expect to see
4/08
5/08
6/08
but u created 12 restricted keyfigures , so it will show upto
4,5,6 months only -
Do we write variable customer exits for virtual key figures in Bex?
Hi all,
Am I thinking the right here " We write variable customer exits in CMOD for virtual key figures in BEx " or am I totally wrong. If thats the case where do we write it.
Thanks,
JBNevermind
-
Add update rule for new key figure in one info struc
Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated. -
How to create Variables for the Key Figures
Hi All,
How to create Variables for the Key Figures
Thanks
BhaskarHi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P
Maybe you are looking for
-
Please point to ebooks in fixed layout format with javascript animation and interactivity
Hi! I am a danish children's author and want to create an ebook in "Fixed layout" for the ibookstore. I want the ebook to have simple interactive and animated features triggered by javascript. I would like more knowledge about what is and isn't possi
-
Best screen protector? Mophie juice pack? for Verizon iPhone
I just got the Verizon iPhone. Can people suggest 1) the best screen protector; the one that came with it is weird in that it won't actually attach to the screen at the edges 2) the juice pack from Mophie (case + built-in additional battery) - does i
-
Access Denied Error For Shared Folder with Win Server 2008R2 Task Manager Scheduled Task
Hi, I have scheduled a Task with the Task scheduler. It invokes an .EXE file after every 5 min. The application is supposed to access some files lying on a different Server's shared path, process them and move them across folders on the Shared path o
-
Namespace disappears when invoke is called
I am sending the following SOAP message (I've abbreviated it ...): <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:open="http://www.openuri.org/" xmlns:pet="http://gencat.net/scsp/esquemes/peticion"> <soapenv:Header/
-
Unable to access application set in admin console after upgrade to 7.0 M
Hi Experts I am unable to access the Application Set through BPC Administration after upgrading our development server to version 7.0 SP3. I followed the instructions as per the Upgrade guide, and there was no issues during the installation. But when