Report development in Web UI

Hi CRM Experts,
I have to develop a Web UI report in CVRM 2007 for displaying Activity List.
I know how t o develop a report in SAP gui but what I want to know is how to develop a web UI report in CRM 2007?
Please let me know the steps.
Regards,
Sangeeta.

Hi,
Please look for the document C41_BB_ConfigGuide_EN_DE in the best practice guide for SAP CRM. My best wishes.
With Regards
Binu

Similar Messages

Report development in Web UI in CRM 2007

Hi CRM Experts,
I have to develop a Web UI report in CVRM 2007 for displaying Activity List.
I know how t o develop a report in SAP gui but what I want to know is how to develop a web UI report in CRM 2007?
Please let me know the steps.
Also, please let me know if there are any tutorials or documents available for the same.
Regards,
Sangeeta.

Hi Sangeeta,
You can create a normal GUI report and then assign a transaction code to it.
You can use transaction launcher to call this transaction on Web UI. Hence you would be able to execute the report in Web UI.
Hope this helps!
Regards,
Saumya

Report Developed in Webi Rich Client Consuming more time in Data Retrieval

Dear All,
I am a BO Consultant, recently in my project I have developed one report in Webi Rich Client., at the time of development and subsequent days the report was working fine (taking Data Retrieval time less than 1 minute), but after some days its taking much time (increasing day by day and now its taking more than 11 minutes).
Can anybody point out what could be the reason?????
We are using,
1. SAP BI 7.0
2. SAP BO XI 3.1 Edge
3. Webi Rich Client Version :12.3.0 and Build 601
This report is made on a Multiprovider (Sales).
What are the important points that should be considered so that we can improve the performance of Webi Reports????
Waiting for a suitable solution.....................
Regards,
Arun Krishnan.G
SAP BO Consultant
Edited by: ArunKG on Oct 11, 2011 3:50 PM

Hi,
Please come back here with a copy/paste of the 2 MDX statements from the MDA.log to compare the good/bad runtimes.
& the 2 equivalent DPCOMMANDS clauses (good and bad) from the WebI trace logs.
Can u explain what u really mean in the bold text above..................Actually I didn't get you..........
Pardon, I have only 3 months experience in BO.
Regards,
Arun
Edited by: ArunKG on Oct 11, 2011 4:28 PM

Report developed in 6i and open and run in 10g, Web Layout is not working

Hi,
Initially reports were developed in Reports 6i now we need to convert into 10g. I just opened the .rdf in Reports10g. Report is successfully running in paper layout and showing the data. But when i try to run the report in Web Layout im getting a BLANK INTERNET EXPLORER SCREEN. Why is it so? What should i do to run my report successfully in Web Layout? When i see Web Source, i am seeing the below code,
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
<%@ page language="java" import="java.io.*" errorPage="/rwerror.jsp" session="false" %>
<%@ page contentType="text/html;charset=ISO-8859-1" %>

<html>
<head>
<meta name="GENERATOR" content="Oracle 9i Reports Developer"/>
<title> Your Title </title>
<rw:style id="yourStyle">

</rw:style>
</head>
<body>
<rw:dataArea id="yourDataArea">

</rw:dataArea>
</body>
</html>

Please, guide to achive the Web Layout Report.
Thanks & Rgds,
M Thiyagarajan

Hello,
The answer is in the Migration FAQ :
When I open an Oracle6i Reports Developer report in the Oracle Reports Builder 10g and run my Web layout, I get an empty Web page in my browser.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm#368
Regards

Calling a Web Service in Oracle Report Developer 10g?

Hello,
Does Oracle Report Developer 10g supports Web Services (calls) or XML files as a Data Source?
If yes. From what version?
Thanks.

ok, so you have at least 2 solutions:
1. you get the data into a loop through your Java array.
2. you use the EXEC_SQL package function to create a dynamic SQL cursor
Select ... from the_table where code in ('c1', ..., 'cn')Francois

Run Web Layout in Reports Developer not working properly

I created a simple tabular report on hr.employees. It runs fine for the "Run Paper Layout" button. When I click "Run Web Layout" I get an IE browser window with the following:
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception message.
I do not know where to 'Set the init-param debug_mode to "true"'
I'm using windows XP
My "home" for the 10g Developer Suite is I:\DevSuite10g
My "home" for the 10g Rel2 database is I:\oracle\product\10.2.0\
I can navigate to http://mycomputer:8890/reports/rwservlet and see the
"OracleAS Reports Services - Servlet Command Help" webpage
I'm not using Oracle Application Server software.
Please Advise........Mark

Sure, here is the note.
Subject: Running JSP Report in Builder returns: Error: 404 Not Found Oraclejsp: Java.Io.Filenotfoundexception
Doc ID: 372624.1 Type: PROBLEM
Modified Date : 07-JUN-2006 Status: MODERATED
In this Document
Symptoms
Cause
Solution
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to: Oracle Reports Developer - Version: 10.1.2.0.2
This problem can occur on any platform.
Symptomso The loss of functionality
Cannot test jsp using Run to Web Layout button.
o The sequence of events
Open a report in builder.
Click on Run to Web Layout.
Browser shows 404 error.
o The significance of loss
Cannot test reports in builder.
o Include specific error messages (error number with syntax)
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the initialization parameter in debug_mode to "true" to query the complete exception message.</HT
o What IS working
Paper layout reports work.
CauseA space in the name caused the URL call for the jsp not to be valid.
When the URL is generated, the space is treated as the need for a new parameter.
EXAMPLE
JSP name: 'my test.jsp'
Builds the following URL:
http://server:3000%2Fmy+test000203332.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes
While the following name without a space produces a good URL
JSP name: 'myname.jsp'
http://server:3000%2Fmyname000203332.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes
Note that the '+' is not in the good URL.
SolutionTo implement the solution, please execute the following steps:
1. Rename you report from my test.jsp' (with space) to 'mytest.jsp' (no space)

Can't print OLE objects when 9i report developed in 6i

Hi,
I am migrating my reports from 6i to 9i. I just open report in 9i which is already developed in 6i and run the report it don't print OLE objects. It shows when I run report in Designer Preview, but in printing it shows blank
--Vijay

Hello,
The answer is in the Migration FAQ :
When I open an Oracle6i Reports Developer report in the Oracle Reports Builder 10g and run my Web layout, I get an empty Web page in my browser.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm#368
Regards

Reports Server/running reports on the web.

I am trying to configure my web server to run reports on the web. I have followed the instructions provided by Oracle, but some is not clear. When i try to run report on the browser, i get the following error:
CGI Error
The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
Oracle documentaion say the following about the steps to configure the web server:
1-Start your Web server by entering the following:
2-Start your browser.
3-Create a listener.
4-Configure your Web server mapping and note the physical and virtual directories. For example:
I have done all the steps above except creating a listener. The documentation doesnt explain that step at all.
I have created a cgi-bin directory and made it excetable and copied the rwcgi60.exe from reports server machine to the web server machine. I also copied the TNSNAMES entry for the web server from the reports server machine to the web server machine.
Here is the command i use(just trying to make sure that web CGI is responding, but it doesnt work)
http://web_server/scm/cgi-bin/rwcgi60.exe
Other question: On the server machine, i have 3 oracle directories: ORA81, ISUITES, 806, which one should be the home directory for the reports to work on the web??
I am using oracle 8.1.7 with 9iAS release 1.
Thanks

Please note that our CGI servlet is only used as a migration point for
people with legacy CGI. It is not intended to support people with new
development to -- we encourage you to use JSP and servlets.
Thanks,
Michael
Savitha wrote:
>
Thanks Wei,
Savitha
"Wei Guan" <[email protected]> wrote in message
news:8itate$332$[email protected]..
Yes, WebLogic has CGIServlet to handle CGI, refer to document for details.
Cheers - Wei
Savitha <[email protected]> wrote in message
news:8isq8i$ocn$[email protected]..
Does Web logic Support CGI ?
Need to connect the Web Server with the Oracle Reports Server running
on
a
separate machine.
Which is to be referred to as CGI_Virtual Directory?
Thanks ,
Savitha
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/

Calling a Report from a Web Form

Hi,
I am calling a Report developed in report 6i from a Web form 6i
Button. I am unable to launch the Report if Report is using a
Customized Template. The report is able to launch if it has no
template or using the templates given in report wizard. Is there
any setting required in the Report Server for reading the
template file???

Hello,
According to the way the reports is launched, the format of the reports output depends on the
variables : FORMS60_REPFORMAT (for Forms 6.0 and 6i)
Two others variables are used : FORMS60_OUTPUT and FORMS60_MAPPING.
Can you check the variable FORMS60_REPFORMAT ?
regards Dennis:
Thanks for the info. Your suggestion of changing the windows registry setting FORMS60_REPFORMAT to 'PDF' worked! I did not have to make any other changes to the form. I left the run_product format as is in the form and it worked like a charm. When we eventually migrate to Oracle Reports/Forms 9i we will look into using run_report_object. But for now we will stick with Oracle Forms6i. There was no need to alter the other registry settings FORMS60_MAPPING and FORMS60_OUTPUT since I followed the instructions of setting the virtual directories (symbolic links) when I installed the forms and reports services.
Thanks again for your help!
T.J.

Crystal Reports on Windows Web Server 2008 R2

Hello!
I use Crystal Reports for Visual Studio 2010. I have developed a web project/app in .NET 4.
What exactly should install on the server side (Windows 2008 R2 WEB) for the reports to work? At the moment I'm getting the following error: "Could not load file or assembly 'CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified."
Thx,
M

You will need the runtime:
MSM:     http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
MSI 32 bit:     http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
MSI 64 bit:     http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
Ludek

Parsing a string in Oracle Reports Developer

What this will be used for is just to have a web page allow input of the name and PID so that a simple printout of those items will show up on the .rdf.
I have a string named "Remote_Host" stored in a txt file:
https://my.portal.shands.ufl.edu/portal/page/portal/SHCEMPAUTH&fNAME=ITH,MARY&PID=100000958135
What I need from that string is Name =ITH,MARY AND PID = 100000958135
How do I do this in Oracle Reports developer utilizing the progam unit?

user2033058 wrote:
I appreciate your help - I am new to this so I really don't know what I am doing.
This is what I have - Let me know if it is correct. Currently when I compile it there is an error stating: Encountered the symbol ">" when expecting %Well hopefully my other example has made it a little clearer for you.
Please note, when you post code on the forum, put {noformat}{noformat} before and after the code so that it keeps it's formatting properly. ;)

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Downloading of Oracle 10g Reports developer guide

I have to download Oracle 10g Reports developer guide in pdf format.
so can you please send me exact URL of it .

Hi,
Building Reports:
http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B13895_01/B13895_01.pdf
Publishing Reports to the Web: http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/B14048_02.pdf
Regards
Rainer

Reports 3.0 - Drill Down Reports over the Web

Can anyone tell me how to code a button to run a drilldown
report over the Web ?
I have read about bookmarks, hyperlinks and hypertext and found
the on-line documentation to be rather unclear.
Thanks
null

Magoo is talking about a patch 23, and you are on 11. Maybe that's the difference?
You can also try to upgrade just the Oracle 8 client (I assume Developer 2000 uses the 8 client). We did that to resolve some issues for Developer 6i on a 9i database.
You need to get Oracle8 8.0.6.3.8 patch.

Displaying ABAP report on a web browser

Hi, I want to develop a code for displaying ABAP report on a web browser.

Hi Rao,
Are you looking for running ABAP report from portal / WDA?
There are lot of similar threads available on SCN: to run ABAP report in WDA.
Calling a TCODE PA60 from Web dynpro ABAP
Call TCode MM02 from ALV
Please search in SCN, hope you may find many threads.
Regards,
Rama

Report development in Web UI

Similar Messages

Maybe you are looking for