Reports 3.0 - Drill Down Reports over the Web
Can anyone tell me how to code a button to run a drilldown
report over the Web ?
I have read about bookmarks, hyperlinks and hypertext and found
the on-line documentation to be rather unclear.
Thanks
null
Magoo is talking about a patch 23, and you are on 11. Maybe that's the difference?
You can also try to upgrade just the Oracle 8 client (I assume Developer 2000 uses the 8 client). We did that to resolve some issues for Developer 6i on a 9i database.
You need to get Oracle8 8.0.6.3.8 patch.
Similar Messages
-
Report painter and drill down reports
Hi SAP gurus,
Can any froward configuration of report painter and drill down reports.
iassign pointsHiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki -
Customized drill-down report cannot go to line item level (FGI4 and FGI1)
Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmelHi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM -
Difference between Drill down Report and Interactive Report
What is the difference between Drill down Report and Interactive Report?
Hi,
Drill down report and Interactive report seems to be acts as same. But there is a minor difference between those two.
Drill Down Report - When you click on a particular field in a report it drills down to the next report, it won't trigger another screen.
Interactive Report - When you click on a particular field in a report it will trigger another report based on the field clicked. It opens another session internally in the same screen.
Regards,
Jayaram... -
Drill Down Report to Summary Report Page Navigation
Hi,
I need technical input.
I have 1 summary report, which is having two columns i.e. Name, ID.Name having hyperlink which navigates to drill down level report.
How to go back from drill down level report to summary report.
Note : Using IE back button it is not full filling becz whenver user navigates the data in drill down reports
Example : In drill down report i have 200 records where i have traverese to 175 records.Where i have clicked 6 times next level page button, In this scenario where user click on the IE back button it not takes back to summary report rather than it traverse back 150 records.
Thanks in advances
Regards,
MuraliAfter creating the hyperlink in your ORACLE report you have to do the following
Here are the instructions
1. Open Adobe Reader 8.0 (not sure if earlier versions have an internet option.)
2. Click edit
3. Click Preferences
4. Click Internet
5. Remove check mark for Display PDF in browser
6. Click ok
7. Close Adobe Reader
8. Run your UI
9. Generate a PDF report
10. A pop-up window will appear. Check remember and then click ALLOW
11. Enter username and password (this needs to be done only once to initialize the connection between Adobe and Oracle login app)
Good luck
Carroll -
How to get the back button if we to go the 2nd drill down report??
Hi,
I have a drill down report for the main report. And have detailed drill down as in 1st report>2nd report>3rd report.
But once i goto drill down, the return button is there which directs to main report i.e. 2>1,
But once i goto 3rd, i do not get the back button so that i can access reports in 3>2>1, instead its going directly to 1st from 3rd.
hope i have made the point clear.
Someone suggest me how do i get the back button??
Thanks!!use the below code in Narrative view
<script>
function goBack()
window.history.back()
</script>
<input type="button" value="Back" onclick="goBack()">
If helps mark
Edited by: Srini VEERAVALLI on Feb 13, 2013 12:08 AM -
What is the difference in Interactive reports and Drill down reports?
What is the difference in Interactive reports and Drill down reports? Are they same?
Hi FRD ,
Both are same .
as far as i know there is no difference .
bye . -
How to get the output data of Standard drill down report into z-program?
HI every one,
I want to get the output data of drill down report into z-program.
Actually,if the output is only one, I can get into z-program,
But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthikHI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems? -
Agregated value in original report in not same as the drill down report
Hello experts,
I have a issue with the drill down reports.
Agregated value in the main report is not equal to the agregarated value in the drill down report.
In my report I have a sales for jan 2011,feb 2011 so on
For jan 2011 it is some thing $56000
when I click on this amount it giving the detail level for each region sales and at the end it is giving the total sales for jan 2011 as $98000
My question is why there such difference in the total amount when we are drilling down?
Please help me in this regard. I am new to obiee.hello
do you have any filters on this report that would related to measures?
if so, remove these filters and see if you still get different values;
rgds -
User can't open the drill down report in EIS
Hi Everybody,
Please help me from this problem.I am using EIS for DRILL DOWN Report generating.But few user can't able to do the report.
Please show the path how i can resolve the issue.
Regards,
999What kind of error message (if any) are they getting when they attempt to use the drill through?
-
Problem in accessing the drill down report via RRI
Hi guru's,
ThanX in advance for all the stuff you are providing.
I have a problem with the drill down report.I have two reports Q1 and Q2 where Iam navigating to Q2 from Q1 via RRI.But when I try to drill down to the Report Q2 It gets into an unending state of query execution(to say shortly it gets struck).
This report was working fine earlier.But very Recently I encountered this problem.I started debugging the query at RSRT.For the report Q1 just goes fine but when I drill down to Q2 it gets struck.This is the part of code where the report end up in an unending state.Infact it gets struck exactly while calling the method...
"CALL METHOD g_sx_buffer-r_request->read_data"
Fetch the data, using the wait command only with the second parse
IF g_s_session_prptys-use_wait = rs_c_false
OR i_mode = rrx1_c_grid_get_mode-wait_fetch.
Is data available
CALL METHOD g_sx_buffer-r_request->read_data
EXCEPTIONS
x_message = 8
no_processing = 1.
CASE sy-subrc.
WHEN 1.
Necessary for drill to level
raise no_processing.
WHEN 8.
RAISE x_message.
Can Some one help me out to know what happens at this part of code that is causing the error.
ThanX A Lot,
Regards,
SukumarIts better you raise an OSS message on this problem.
-
How to add the required characterists and key figures to drill down report?
hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Is it possible to see the Drill down output in the expanded format by default in SSRS reports?
Hi Guys,
I have created a drill down report. If i preview my report , by default i can see the out put in the aggregated level and i have to drill it to down levels if i want. My requirement is i want to see the data in the leaf level by default means report
should be displayed in the expanded format to the leaf level, if i want i can drill up the report later.
Is this possible in SSRS? Can some one help me out on this?
Thanks in advance.
Regards,
kiranHi ,
Thanks for the reply. but if i follow this steps i can see the output in the expanded format but + and - symbols will be interchanged. That means if i drill up i have (-) before the column name and if i drill down it will be (+).
For this to work you need to set properties initial appearance of toggle image
see this example
http://www.mssqltips.com/sqlservertip/1329/drill-down-techniques-in-ssrs-with-the-visibility-property/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Drill down report export to pdf
Hi,
I have a drill down report that i need to export to pdf.to get the drill down facility, I used 'HIDE' option for the groups.
The drill down works in crystal.But when I export the crystal report to PDF, I could not see the hidden groups/Tabs, and my drill down doesn;t work.Please suggest me what to do while exporting a drill down report to PDF. Is it possible to export a drill down report to Excel?Can someone suggest the precaustions to be taken while exporting to different formats??
Thank you,
Tatyana.Drill-Down behavior in Crystal doesn't carry over to pdf exports.
Using one of the 3rd-party Crystal Reports schedulers listed at http://www.kenhamady.com/bookmarks.html you can achieve similar behavior in pdf exports by automating the process of:
1. exporting the main report to main pdf.
2. Bursting a detailed report to individual pdf files
3. using Crystal formulas embedded in the main report to generate live links from the exported main pdf to the individual detail pdf files. -
Drill-Down Report Printing Problem for Selection Parameters
Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
PHello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P
Maybe you are looking for
-
Unable to log in to SAP ES workplace HU2 system; Client 800
Hi, I'm unable to access the below SAP IDES system using the link https://esworkplace.sap.com System - HU2 Client * - 800 User * - P610131 I get this message. User account not in validity date. To log on please register on SCN: http://www.sdn.
-
I can't find any error in my vi but it just doesn't work please help
I'm trying to control a robot named cs-113 and I find someone has already achieved this. He wrote a vi called robot cs-113.vi and I just tried to write a same one but it just doesn't work. Can anyone tell me why it doesn't work? Thanks for your help!
-
Not able to select "all devices" in device selector
I am having a problem selecting "all devices" in device selector in most cases in lms4.1. When selecting "all devices" it show up zero. Instead i have to choose "device type groups" and this takes about half a minute to show up. In some cases I a
-
How to use a procedure as source in mapping?
My procedure has a nested table out parameter. I link the nested table parameter to Varray Iterator operator as source. But validation failed. Error message as follows. VLD-1111: This mapping cannot be generated because it contains a combination or s
-
I need to change the ID for a vlan and would like to minimize the outage for migrating the hosts. Our environment are Nexus cores using a VPCs to 5ks. The SVI for the vlan resides on the Nexus cores and only L2 on the Nexus 5ks. For example I have