Report Generation Toolkit error when running exe not vi

Unknown System Error in Get Report Settings.vi->Get Current Font.vi->Excel Easy Table (str).vi->insert table and save file.vi->80x test suite.vi
1. The above is an error I get from my exe
2. I do not get this error when just running the vi.
3. On several report gen functions cohersion dots are on my refnum input.  Is this the cause of my problem with the exe? 
I guess there is an another learning curve when dealing with the app builder. 
Any suggestions would be appreciated.
Thanks
Brian
CLAD
Brian

forget what i wrote. it was my vi. 
funny, most of the time it aint LabVIEW causing the problem but the program itself.
Brian

Similar Messages

  • Labview using Report generation toolkit in 2011 run time engine

    is that possiblity to run the  word in labview using Report generation toolkit in 2011 run time engine

    It is possible to use the Report generaion toolkit with the run time engine.  But you will have to include a lot of VIs from User lib since the report generation toolkit uses a lot of dynamically called VIs and classses.
    Certified LabVIEW Architect
    Certified Professional Instructor

  • Report generation toolkit VI error when running EXE

    A VI inside the Report Generation Toolkit (version 1.1.2), Excel Find Application Directory.vi, will not function correctly when running an EXE.  The "Current VI's path" block will return the path of the currently running EXE rather than the path of the Excel Find Application Directory VI.  (The same would be true for Word Find Application Directory.vi.)
    -Joel
    Solved!
    Go to Solution.

    Have you had a look at this knowledgebase article? The error is caused due to the exclusion of any dynamic VI.
    Ipshita C.
    National Instruments
    Applications Engineer

  • Error involving Report Generation Toolkit and Labview Run Time Engine

    Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

    I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
    Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
    I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
    I displayed my App.Property of APP.DI
    R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
    Any ideas ?
    Greg Klocek

  • Report Generation Toolkit Excel Vi's do not run after creating an executable​. What am I missing?

    I have labview 8.5 and Report Generation Toolkit version 1.1.2.   My vi works fine during development. When I make an executable or an installer the excel vi's do not work. I have seen this question posted before but it has always been for earlier revisions and the answers do not seem to apply with 8.5 and 1.1.2. 

    Hello ajh,
    You will have to include Dynamic VIs in the executable you build. The following link has more information:
    http://digital.ni.com/public.nsf/allkb/C38CE3F3054​2D65B86256F0E00740DD8
    Prashant.

  • Word_print.vi 1015 error when running exe

    I created a vi that generates report in word and prints to default printer. The vi works fine in three different computers with office 2000, 2003 & 2007. But when I create an exe, there is an error: 1015 Word_Print.vi in Print Report.vi. The error is only in system running office 2000. The application was built using LV 8.2 & office 2007. The exe is created with dynamic word vis in support files. I also tried addind Word_print.vi in the support files.
    Could you please let me know what I else I could do?
    Thanks
    U

    Ah, understood.  Which version of the Report Generation Toolkit do you have installed?  All versions, except maybe 1.1, have a folder on the package CD called Compatibility.  Within this folder are directories such as Office 97, Office 2000, [Office XP], [Office 2003], and [Office 2007] (toolkit version determines if you have the items in brackets).  If you dig into these directories, you'll eventually discover the file _wordsub.llb.  This library contains the appropriate _Word Dynamic VIs.vi that you'll want to include in the "support files" section of the application builder.  Refer to the Office.txt document found within C:\Program Files\National Instruments\LabVIEW 8.X\vi.lib\addons\_office directory to confirm what I said.  Thus, to create an executable that will print from your Office 2000 test machine, include the _Word Dynamic VIs.vi from the Compatibility\Office 2000\vi.lib\addons\_office\_wordsub.llb library on your Report Generation Toolkit CD.
    Peter K.
    National Instruments

  • Word report generation toolkit error with Win 7 LabVIEW 2013, Word2010

    Hi All
    I'm seeing different Errors using the Report generation toolkit. Maybe you can help me with that.
    The errors are:
    -2147417846, application is busy in Word_Get_range.vi
    -2146824090 Exception in Microsoft word: Befehl misslungenHelp Path is wdmain11.chm and context ...
    -2147417846 application is busy in Word_Quit.
    the error messages are attached to the post.
    I'm testing 10 sensors with one application and want to run up to 5 applications on one computer. Since I'm seeing such errors as application is to busy I set all my report generation vi's as non-reentrant execution and additionally added some pause after each word modification.
    But I'm still seeing such errors when I run two applications on one computer.
    What is the best way to deal with these errors?
    thanks
    best regards
    Urs
    Attachments:
    exceptionerror.PNG ‏20 KB
    BusyActiveX2.PNG ‏20 KB
    BusyActiveX.PNG ‏22 KB

    Here my Vi's involved in creating the report.
    Is there a way to check wheter word is busy or already open?
    Attachments:
    save report as PDF.vi ‏26 KB
    create_report.vi ‏70 KB
    Word_Update_Table.vi ‏34 KB

  • Report Generation Toolkit - Error message rpcrt4.dll

    Hello
    My labview app. calls functions from the Report Generation Toolkit. I tested the runtime version, and this work fine under in Windows NT and Windows 2000, but does not work under Windows 98. I got and error message say "rpcrt4.dll Page not valid" that seem come from Windows and is related to a Remote Procedure Call. I already check the version of this dll 4.71.2900

    The rpcrt4.dll is part of the DCom98 package. I have seen other problems, unrelated to LabVIEW, with this .dll arise when other programs have installed different versions of some of the DCom DLLs. You may want to consider trying this program out on another Win98 machine, or you may want to search through the Microsoft Support page for errors with this dll, specifically with the error number in the message you receive. The ones that I have seen have suggested restoring the DCom dlls to the original ones from the Win98 disk. There is also an update to the DCom components for Windows 98 (version 1.3) on the Microsoft website.

  • Report Generation Toolkit, Error 1706

    I'm trying to run some report generation toolkit examples, typically those that plot data in various charts in Excel.
    However I'm consistently receiving the attached error, seemingly saying that I require Microsoft Project -- something that seems strange.
    Attachments:
    NI Example Finder_2012-02-22_14-42-56.jpg ‏55 KB

    Sunshine's recommendation is a good one. In terms of the problem itself I suspect that the problem isn't in the LV world at all. I have had problems multiple times were attempting to open a file caused Windows to try and install a completely different program. The last time it happened, I never did anything to fix it, it just stopped doing it one day. The other times I ran some basic system cleanup (using ccleaner), removed stuff that I knew I didn't need and the problems cleared.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Report Generation Toolkit Error (undefined erro)

    Does anybody know what error -214 682 7864 (0x800A01A8) means when coming from the Report Generation Toolkit.
    I have an app which has been happily ticking over for several weeks, and then this error was generated when attempting to write a table to a spreadsheet. The error was generated all the way down in NIReportGenerationToolkit.lvlib:Excel_Get_range.vi (this is the ActiveX code).
    Any ideas? 
    nrp
    CLA

    nrp wrote:
    I have an app which has been happily ticking over for several weeks, and then this error was generated when attempting to write a table to a spreadsheet.
    Was it the first time you attempted to write the table to that spreadsheet?
    Maybe the error is due to the spreadsheet grown oversize than its limit so that it cant accomodate the table anymore.
    What is the version of MS Office you are using? I think Office 2003 can go only upto 1024 columns...
    - Partha
    LabVIEW - Wires that catch bugs!

  • Report Generation Toolkit Error

    I  have an application that generates multiple excel spreadsheets each containing a table and four graphs.  This has been working fine for three months but I am now getting error when generating the reports.  The source of the error is in the Excel_create_workbook as indicated on the attached picture.  I am passing in a template name for my excel reports.  The error code (-2147352571) states a type mismatch.  The file path to my template is a constant so I can't see how sometimes I get a type mismatch and other times I don't.
    Any help on this would be greatly appreciated.
    Thank you,
    AJL
    Attachments:
    create_Workbook error.JPG ‏269 KB

    Thanks for the reply, however, this VI is part of the Report Generation Toolkit so I don't want to have to modified NI's code if possible.  I did try your suggestion without saving the VI and I still got the same error. 
    Any other ideas? 
    BTW - I encountered this problem first in an executable but have since seen the error in the development code.
    Does anyone know if there is a limit to how many times you can create an excel document from LabVIEW?  I wouldn't think so but the error seems to happen if I try to create several (more then five usually) documents at a time. 
    Thanks in advance
    AJL

  • LabVIEW Report Generation Toolkit in the application does not work

    I have LabVIEW7.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1, which was updated after installed. I made a VI in LabVIEW7.1 enviroment using the Report Generation Toolkit and it works very well. After the VI was build an application.exe and installed even in the same PC, the Report Generation Toolkit didn't work. Excel that should pops-up does not do anything.
    the office i used is office xp. would you like to help me?
    thank you very much.
    Jing

    When you build the application, you have to include as "Dynamic vi" in Source file tab the vi:
    _Word Dynamic VIs.vi. from _wordsub.llb
    _Excel Dynamic vis.vi from -Excelsub.llb
    in the following library
    ...\National Instruments\LabVIEW 7.1\vi.lib\addons\_office\"
    Refer to the following discussion thread
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000053460000&ECategory=LabVIEW.LabVIEW+General

  • Report Generation Toolkit Error Quick Question

    Hi,
         I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003.  I took this to my production machine and ")@#(&%(*#^%()^!!!"  The production machine has office 2007 and a fully licensed version of the RGT.  Both machines have LabVIEW 8.6.0.  I've read all the stuff about these errors and something about classes and dll's and whatnot's.  So my quick question, is:  Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect? 
    Solved!
    Go to Solution.

    Hi 
    Quick Answer: Probably
    Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
    Best Regards
    David
    NISW

  • Data Services 4.0 error when running job - not updating repository table

    Hi All,
    I am hoping someone might have come across this error before.
    When running a data services job, from within Data Services Designer, when trying to re-run the same job, I get the following error messages:
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     |Data flow DF_XXXX_Data_DW1Date
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     SQL submitted to Oracle Server <BO3> resulted in error <ORA-00001: unique constraint (DS3_ADMIN.SYS_C005632) violated
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     >. The SQL submitted is <INSERT INTO AL_BW_REQUEST (REQUESTID,TYPE,VALUE,DF_NAME,CREATION_TIME) VALUES (
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     'REQU_4NIVIZ1G9S5B7LUY0HHP65ZJU', 3 , '29', 'DF_XXXX_Data_DW1Date',  to_date('2011.10.17 10:38:39', 'yyyy.mm.dd
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     hh24:mi:ss') )>.
    9332     2572     REP-100109     17/10/2011 10:38:39 AM     |Data flow DF_XXXX_Data_DW1Date
    9332     2572     REP-100109     17/10/2011 10:38:39 AM     Cannot save <RequestID info> into the repository. Additional database information: <SQL submitted to Oracle Server <BO3>
    9332     2572     REP-100109     17/10/2011 10:38:39 AM     resulted in error <ORA-00001: unique constraint (DS3_ADMIN.SYS_C005632) violated
    When I go and look into the Data Services repository AL_BW_REQUEST  table, the first time the job is run, all five fields in this table populate with data successfully. When re-running the job, on 3 out of the five fields within this table are populated but the VALUE and DF_NAME field are not populated, hence causing the primary key violation.
    Here is the data below from the AL_BW_REQUEST  table:
    REQUESTID                                      TYPE  VALUE     DF_NAME                               CREATION_TIME
    REQU_4NIVIZ1G9S5B7LUY0HHP65ZJU     3                      10/17/2011 10:38:38 AM
    REQU_4NJ503RVIFD3VLBJJEKBJ3OE2     3                       10/17/2011 10:33:37 AM
    REQU_4NJ4ZHSP9F93L3OAUDV6RHCMY     3                       10/17/2011 10:32:31 AM
    REQU_4NIV1NKP9645E394E7H12Q796     3                      10/17/2011 9:53:53 AM
    REQU_4NEYFNI2U68MBJOEWFJWVWWU2     3  24     DF_XXXX_Data_DW1Date      10/17/2011 9:47:58 AM
    If I truncate this table and re-run the DS job, it will not populate the VALUE and DF_NAME fields. 
    Does anyone know what could be causing this? The target source is BW.
    Seems like a bug to me.
    Thanks,
    Ainsley

    Hi Ramesh,
    Am a HANA apps consultant in India, would like to get in touch with you. but don't know how
    regards,
    Tilak

  • Min Mx planning report gives an error when run with RE-Stock yes.

    Hi All,
    We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error.
    what are the additional setups need to be done for it?
    It works fine when running with re stock no.and gives the out put of the report accurately.
    Thanks.
    MPH

    Hi Garry,
    These are the parameters and error codes are also given.
    P_ORG_ID='328'
    P_LEVEL='1'
    P_SELECTION='3'
    P_CAT_SET_ID='1'
    P_CATG_STRUCT_ID='101'
    P_SORT='1'
    P_D_CUTOFF='2009/07/03 00:00:00'
    P_D_CUTOFF_REL='0'
    P_S_CUTOFF='2009/07/03 00:00:00'
    P_S_CUTOFF_REL='0'
    P_USER_ID='5411'
    P_RESTOCK='1'
    P_DD_LOC_ID='32488'
    P_NET_UNRSV='1'
    P_NET_RSV='1'
    P_NET_WIP='1'
    P_INCLUDE_PO='1'
    P_INCLUDE_MO='1'
    P_INCLUDE_WIP='1'
    P_INCLUDE_IF='1'
    P_INCLUDE_NONNET='2'
    P_LOT_CTL='3'
    P_DISPLAY_MODE='1'
    P_SHOW_DESC='2'
    P_PUR_REVISION='2'
    *MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
    MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
    REP-1825: Before Report trigger returned FALSE.*

Maybe you are looking for

  • How do I increase the size of type in the mail box listing of new mail?

    I want to increase the font size for email that has been received in the inbox.

  • T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

    I just reinstalled a T60 from scratch TWICE  to the point of updating  - Intel Wireless Wifi Link for Windows XP - Just after that very latest Update (3.1.1.1 or so?)  there is no WLAN possible and I had to find out, that  a system restore is impossi

  • Network Printing Broken

    I have an iMac connected via ethernet cable to my router and a MacBook Air, which connects to the same router via WiFi. I have two network printers (a Brother HL-5250DN and a Samsung CLX-3170), both wired via ethernet to the same router. Both Macs ha

  • Updating a column when button  pressed

    Hello, I have a ADF master detail table and in the detail table and I would like to add a button. When user select a row and presses the button, I need to update a column value to 'Y'. How can I do this? I need to have a Yes or No prompt as welll bef

  • Solaris Heap grow for no reason ....

    Hi all, This is a tricky one. I have played around with Java under Unix for a while. My programm was working under Sun Ray with a normal heap with version JDK1.4beta3. I then decided to put it under JDK1.4rc..... Boum. The programm keep on exploding