Report need to be displayed and sent to spool

Hi All,
I have a requirement to display the output and simultaneously send the report output to spool and show the status message that report output is sent to spool with XXX spool number. Can you please help me regarding this. Its classical report.
Thanks,
Ram

Hi,
call the function module while displaying the report GET_PRINT_PARAMS.
see the sample program http://help.sap.com/saphelp_40b/helpdata/pt/9f/dba5ef35c111d1829f0000e829fbfe/content.htm
DATA: VAL,
        PRIPAR LIKE PRI_PARAMS,
        ARCPAR LIKE ARC_PARAMS.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      LAYOUT                 = 'X_65_255'
      LINE_COUNT             = 65
      LINE_SIZE              = 255
    IMPORTING
      OUT_PARAMETERS         = PRIPAR
      OUT_ARCHIVE_PARAMETERS = ARCPAR
      VALID                  = VAL.
NEW-PAGE PRINT ON NEW-SECTION
                     PARAMETERS PRIPAR
                     ARCHIVE PARAMETERS ARCPAR
                     NO DIALOG.
    IF VAL <> SPACE.
      LOOP AT ALVINTERNAL TABLE
       ENDLOOP.
    ENDIF.
NEW-PAGE PRINT OFF.
Prabhudas

Similar Messages

Change COPA Report - need to add Variable and Characteristics

Hello,
I need to change the existing COPA report, Need to add WBS element as a selection criteria and also a characteristics so it can be drilled down. Create WBS as a global variable in KE3E and it is not showing up in when i change the report in KE30 in the available list of characteristics. And also it is not showing up in KE35 when i change the general selection to add as a Variable.

Go to KE91 and create the report.
In KE91, the Characteristic Cost element (KSTAR) is available. Add it as below.
Cost Element .... Check the box Hierarchy node ...... check the box Variable on/off ...... KSTAR...... Cost element.
After this, just check in Variable, the Cost element shuold appear
Line item based reports are defined in KE91 (segment level reports in KE31).
Both types of reports can be started in KE30 and changed in KE32
Let us know if you still have any queries
Thanks
Edited by: nkonnipati on Feb 19, 2012 5:34 AM

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

How to autogenrate multiple items report of the SharePoint list and sent to the client id on daily basis

Dear Support,
As per customer requirement he want to send SharePoint list multiple items reports on daily basis by email autognrated workflow in SharePoint.
I tried for that and created workflow for SharePoint list on new item creation using SharePoint designer 2013 it’s working fine. But I am unable to send list multiple items report by work flow.
Please let me know the process for SharePoint list multiple items report generation and how to sent mail to the client id on daily basis.
Would request your support.

Hi
another approach
use a powershell scheduled script which will get needed lists items, adn will sned the infos by email
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Cross-tab report: need to SUM field and present as HH:MM:SS format

I am creating a cross-tab report and several of the selected data fields I need to summarize are time-based fields, which are stored as seconds in the database. When I create a standard report, the formula to convert the seconds to HH:MM:SS and SUM works just fine, but when I try to bring that formula field into the cross-tab report, it does a COUNT on it rather than a SUM.
How can I get it to SUM that data and present it in an HH:MM:SS format in the cross-tab report?
Here is the formula I'm using in the Standard Report to convert from seconds to HH:MM:SS and SUM the data.
totext(abs((Sum ({wagent.acwtime})) / 3600),"00") & ":" &
totext(abs(remainder((Sum ({wagent.acwtime})),3600) / 60),"00") & ":" &
totext(abs(remainder(remainder((Sum ({wagent.acwtime})),3600),60)),"00");

In the cross tab, do the sum on {wagent.acwtime}. In the cross tab on the page, right click on the field for the sum, select Format, press the X-2 next to Display String, and enter your three line formula, replacing {wagent.acwtime} with CurrentFieldValue.
HTH,
Carl

Report Needed to show WBS and Profit Center on Invoices

I need a report of open and cleared invoices that show the WBS and Profit Center.
I have tried the FBL5N and it doesn't populate it. Any other reports out there???

You dont have to join them. Keep both profit center and cost centre in the cube. While defining the update rules, derive profit center from cot centre.
In the report , keep profit center and cost centre as free char.
The users can dynamically drill down and view the report for cost centre or profit centre or both.
Another idea is to keep profit centre as a nav attribute in the cube and in that case, you dont have to derive profit centre from cost centre in the update rules.
Ravi Thotahdri

Report Painter Long Text Display and fiscal year

Hi Gurus'
Could you pls let me know, how do I get Long text in the report. Usually we get medium text.
And in the selection screen if i have like:
Company code
Fiscal year
Period
How do I get the text along with the Fiscal year.
Like Revenue 2008
Regards,
SK

Hi,
For displaying long text in rows or column,
go to menu bar>Formatting>Rows/column texts. Under this tab, you can select shot, medium, long as required for both rows and columns.
Further, to display fiscal year along with text in column, you must have asisgned variable for fiscal year in column. Go to text of the column and mention &variable of fiscal year assigned for the column after the text.
Reward points if useful.
Regards,
Harish

How do you undock a thunderbolt connected display and drives?

Hi
This question goes out to anyone using Apples Thunderbolt display and an Apple laptop.
The new Retina display MacBook might just win me over from my trusty MacBook Air and iMac combination I.e. it would replace both of them.
But I would need an external display and something to dock my FireWire disk drives to so the Thunderbolt display looks like a good option.
HOWEVER, I would reasonably frequently need to 'undock' the MacBook to go out to a meeting and would need to easily eject all my attached drives.
Is there an easy way to do this, or do I need to remember to manually eject each one before disconnecting the Thunderbolt cable from the laptop?
Looking forward to some good answers!!!!!
Robin

I've written a small applescript and exported it as an application that you can run each time you want to eject all your drives.
It systematically ejects each external drive until they're all gone, then it will be safe to remove the thunderbolt cable.
You can get it here: https://www.dropbox.com/sh/knwyt25fxhz6ilq/Qo0omdJAmC

Web Reporting - Converting HTML to PDF and displaying

Does any know of a method to convert the html data stream to a PDF format so it may be returned to the browser for printing?

i created an Help Service which can convert the current Web Application State to Pdf and it displays it automatical in the browser window. Charts and all the other stuff is also converted.
This is only on-top of a complex PDF Framework which offers features you request for example.
Batch support. Load balancing. Stylesheet support. Report Books. There are Convenience Classes in ABAP which support Template ID in PDF-Bytestream out. Sent PDF as mail. publish to Portal. Information Broadcasting integration etc.
the advatnage of this solution is that the conversion is performed on the Server and not on the client which means you need only one license, and not for each client...
i hope this helps.
best regards.
Kai Wachter

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

ALV report display online and generate in spool

Dear expert,
I have created an ALV report. I want to run this report online. After executed, the report is displayed. After display this report, I also want to generate the output report in the spool. Is there any way to do this? Thank you.
I have tried to use submit...to SAP Spool. in this way, it will generate the spool, but it will not display the report online. I want it both display online and generate a spool.

well forget yout the new-page print on thingie, since you use ALV.
if you had a write list this trick would be cool since you just could do following:
Do 2 times.
if sy-index GT 1.
    new page print on.
endif.
loop at itab into wa.
    write stuff....
endloop.
if sy-index GT 1.
    new page print off.
endif.
enddo.
/edit arrrgh forgot to write further...
with your ALV you could process a write list as well after displaying but you will have layout differences between your display and your spool then and i dont think that this is what you want/need.
you could however after display process your programm a second time, in background task and give it a printer where to print to. Since ALV wont get executed in background task you will get a spool instead.
Edited by: Florian Kemmer on Sep 15, 2010 2:40 PM

Report is executing in background and need data(output) in excel format

Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AM

Hi
Download a report to excel with format (border, color cell, etc)
Try this program...it may help you to change the font ..etc.
Code:
REPORT ZSIRI NO STANDARD PAGE HEADING.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
      H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
      H_MAP TYPE OLE2_OBJECT,          " workbook
      H_ZL TYPE OLE2_OBJECT,           " cell
      H_F TYPE OLE2_OBJECT.            " font
TABLES: SPFLI.
DATA H TYPE I.
table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
display header
ULINE (61).
WRITE: /     SY-VLINE NO-GAP,
          (3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
           IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-007
       EXCEPTIONS
            OTHERS     = 1.
start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-008
       EXCEPTIONS
            OTHERS     = 1.
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - start
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - end
disconnect from Excel
     CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
      FORM FILL_CELL                                                *
      sets cell at coordinates i,j to value val boldtype bold       *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*&      Form ERR_HDL
      outputs OLE error if any                                       *
--> p1        text
<-- p2        text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM.                    " ERR_HDL
Regards
Murali Papana

Need to get .ENV and reports.sh set up correctly for 9i/WebUtil

We have been editing default.env, a app-specific version of default.env called duris.env, and reports. sh, trying to fix the conflict between Forms WebUtil and Reports in 9.0.2.0.1. Now, it's to the point that I can't even run Reports from Forms without core dumping(direct URL calls to Reports work fine) .
I am pasting the contents of these 3 files into this note, in hopes someone can look at them and tell me why Reports won't even run from Forms any more. Any suggestions are welcome. My email is [email protected].
Here is the content of our default.env:
# $Header: default.env@@/main/25 \
# Checked in on Wed Apr 3 15:45:42 PST 2002 by vobadm \
# Copyright (c) 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Id: default.env /main/25 3-apr-2.15:45:42 vobadm $
# default.env - default Forms environment file, Solaris version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value used will be that defined
# in the environment in which the servlet engine (OC4J or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=/usr/oracle/product/9iasr2/mtier
# Search path for Forms applications (.fmx files, PL/SQL libraries)
FORMS90_PATH=/usr/oracle/product/9iasr2/mtier/forms90:/usr/oracle/product/webutil/forms:/usr/oracle/apps/duris/forms/bin:/usr/oracle/apps/tools/forms/bin
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here
CLASSPATH=/opt/java1.3/jre/lib/rt.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj90.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:/usr/oracle/product/webutil/lib/webutil.jar
#@@CLASSPATH=/opt/java1.3/jre/lib/rt.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj90.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar:/usr/oracle/product/webutil/lib/webutil.jar
#CLASSPATH=/opt/java1.3/jre/lib/rt.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj90.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar
# The PATH setting is not required for Forms if the Forms executables are
# in <ORACLE_HOME>/bin. However, it is required if Graphics applications
# are called from Forms applications.
PATH=/usr/oracle/product/9iasr2/mtier/bin
# Settings for Reports
# NOTE: This setting is only needed if Reports applications
# are called from Forms applications
#@REPORTS_CLASSPATH=$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:/usr/oracle/product/webutil/lib/webutil.jar
REPORTS_CLASSPATH=$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/reports/jlib/rwrun.jar
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
GRAPHICS60_PATH=
# Settings for forms9i tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS90_TRACE_PATH=<FORMS_ORACLE_HOME>/forms90/server
FORMS90_TRACE_PATH=/ford/thishost/u/oracle
# System settings
# You should not normally need to modify these settings
# Path for shared library objects
# This is highly platform (if not machine) specific ! At install time
# <percent>LD_LIBRARY_PATH<percent> should be replaced with the
# actual value of the LD_LIBRARY_PATH environment variable (at install
# time). That should ensure we have the paths for such necessities as
# the motif and X11 libraries.
# Explanations:
# - Reports needs the path for libjava.so
# (/cdm/solaris/o_jdk/1_2_2_0_0/jre/lib/sparc)
# - Forms needs two paths to the jre, for libjvm.so and libhpi.so
# - In ojdk 1.3.1 the location of libjvm.so is lib/sparc (there is no
# classic directory) so we do not include the .../classic directory
# below. There are other versions of libjvm.so (in directories server,
# client and hotspot) but we will use the version in lib/sparc for now.
SHLIB_PATH=/usr/oracle/product/9iasr2/mtier/lib32:/usr/oracle/product/9iasr2/mtier/jdk/jre/lib/PA_RISC:/usr/oracle/product/9iasr2/mtier/jdk/jre/lib/PA_RISC/classic:%SHLIB_PATH%
# Added for WebUtil
WEBUTIL_CONFIG=/usr/oracle/product/webutil/server/webutil.cfg
Here is the content of our app-specific .ENV file, duris.env:
# $Header: default.env@@/main/25 \
# Checked in on Wed Apr 3 15:45:42 PST 2002 by vobadm \
# Copyright (c) 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Id: default.env /main/25 3-apr-2.15:45:42 vobadm $
# default.env - default Forms environment file, Solaris version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value used will be that defined
# in the environment in which the servlet engine (OC4J or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=/usr/oracle/product/9iasr2/mtier
# Search path for Forms applications (.fmx files, PL/SQL libraries)
FORMS90_PATH=/usr/oracle/product/9iasr2/mtier/forms90:/usr/oracle/product/webutil/forms:/usr/oracle/apps/duris/forms/bin:/usr/oracle/apps/tools/forms/bin
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here
CLASSPATH=/opt/java1.3/jre/lib/rt.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj90.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:/usr/oracle/product/webutil/lib/webutil.jar
#@@CLASSPATH=/opt/java1.3/jre/lib/rt.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj90.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar:/usr/oracle/product/webutil/lib/webutil.jar
#CLASSPATH=/opt/java1.3/jre/lib/rt.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj90.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar
# The PATH setting is not required for Forms if the Forms executables are
# in <ORACLE_HOME>/bin. However, it is required if Graphics applications
# are called from Forms applications.
PATH=/usr/oracle/product/9iasr2/mtier/bin
# Settings for Reports
# NOTE: This setting is only needed if Reports applications
# are called from Forms applications
#@REPORTS_CLASSPATH=$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:/usr/oracle/product/webutil/lib/webutil.jar
REPORTS_CLASSPATH=$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/reports/jlib/rwrun.jar
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
GRAPHICS60_PATH=
# Settings for forms9i tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS90_TRACE_PATH=<FORMS_ORACLE_HOME>/forms90/server
FORMS90_TRACE_PATH=/ford/thishost/u/oracle
# System settings
# You should not normally need to modify these settings
# Path for shared library objects
# This is highly platform (if not machine) specific ! At install time
# <percent>LD_LIBRARY_PATH<percent> should be replaced with the
# actual value of the LD_LIBRARY_PATH environment variable (at install
# time). That should ensure we have the paths for such necessities as
# the motif and X11 libraries.
# Explanations:
# - Reports needs the path for libjava.so
# (/cdm/solaris/o_jdk/1_2_2_0_0/jre/lib/sparc)
# - Forms needs two paths to the jre, for libjvm.so and libhpi.so
# - In ojdk 1.3.1 the location of libjvm.so is lib/sparc (there is no
# classic directory) so we do not include the .../classic directory
# below. There are other versions of libjvm.so (in directories server,
# client and hotspot) but we will use the version in lib/sparc for now.
SHLIB_PATH=/usr/oracle/product/9iasr2/mtier/lib32:/usr/oracle/product/9iasr2/mtier/jdk/jre/lib/PA_RISC:/usr/oracle/product/9iasr2/mtier/jdk/jre/lib/PA_RISC/classic:%SHLIB_PATH%
# Added for WebUtil
WEBUTIL_CONFIG=/usr/oracle/product/webutil/server/webutil.cfg
Here is the content of reports.sh:
#!/bin/sh
# $Header: reports.sh@@/main/pl_hpux_formsreports_9i/8 \
# Checked in on Mon Apr 8 19:40:42 PDT 2002 by diglesia \
# Copyright (c) 2002 by Oracle Corporation. All Rights Reserved. \
# $
# Copyright (c) 60, 2002 by Oracle Corporation. All Rights Reserved.
## Example file to set environment variables in Bourne-shell or K-shell
## for Oracle Reports 9i. Refer to Install Doc for more detail on each
## of these environment variables. You need to modify some of the environment
## variables before doing source on this file ( % . reports.sh ).
##DISPLAY=< your unix machine name:0.0 >; export DISPLAY
DISPLAY=localhost:5; export DISPLAY
## ORACLE_HOME=< oracle home >; export ORACLE_HOME
## if you need more than one diretory in your path, all directories should be
## separated by ':'
PATH=$ORACLE_HOME/jdk/bin:$ORACLE_HOME/bin:${PATH}; export PATH
## Platform specific settings
## HP-UX settings
if [ `uname -s` = 'HP-UX' ]
then
SHLIB_PATH=$ORACLE_HOME/jdk/jre/lib/PA_RISC:$ORACLE_HOME/jdk/jre/lib/PA_RISC/classic:$ORACLE_HOME/lib32:${SHLIB_PATH}; export SHLIB_PATH
## Linux settings
elif [ `uname -s` = 'Linux' ]
then
LD_LIBRARY_PATH=$ORACLE_HOME/jdk/jre/lib/i386:$ORACLE_HOME/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
## Compaq Tru64 settings (OSF1)
elif [ `uname -s` = 'OSF1' ]
then
LD_LIBRARY_PATH=$ORACLE_HOME/jdk/jre/lib/alpha:$ORACLE_HOME/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
## Default settings
else
LD_LIBRARY_PATH=$ORACLE_HOME/jdk/jre/lib/sparc:$ORACLE_HOME/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
## end platform specific settings
fi
## You need to set TNS_ADMIN and TWO_TASK or ORACLE_SID to connect to database
## Some default values have been set below
TNS_ADMIN=$ORACLE_HOME/network/admin; export TNS_ADMIN
## TWO_TASK=< two task name >; export TWO_TASK
## ORACLE_SID=< ORACLE SID >; export ORACLE_SID
## setting for Reports Runtime
RW=$ORACLE_HOME/reports; export RW
#REPORTS_PATH=$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo:$ORACLE_HOME/reports/integ:$ORACLE_HOME/reports/printers; export REPORTS_PATH
REPORTS_TMP=/tmp; export REPORTS_TMP
REPORTS_NO_DUMMY_PRINTER=TRUE; export REPORTS_NO_DUMMY_PRINTER
REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar; export REPORTS_TAGLIB_URI
REPORTS_CLASSPATH=$ORACLE_HOME/reports/jlib/rwbuilder.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/j2ee/home/oc4j.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar;export REPORTS_CLASSPATH
##This section added by configurefont.sh
PRINTER=fontprinter;export PRINTER
TK_PRINT_STATUS=echo;export TK_PRINT_STATUS
REPORTS_PATH=$REPORTS_PATH:$ORACLE_HOME/guicommon9/tk90/admin/TTF;export REPORTS_PATH
#REPORTS60_PATH=$REPORTS60_PATH:$ORACLE_HOME/guicommon6/tk60/admin/TTF;export REPORTS60_PATH
TK90_UNKNOWN=$ORACLE_HOME/guicommon9/tk90/admin; export TK90_UNKNOWN
TK90_PPD=$ORACLE_HOME/guicommon9/tk90/admin/PPD; export TK90_PPD
TK90_AFM=/opt/rational/base/cots/acrobat.4.0/hppa_hpux/Resource/font:$ORACLE_HOME/guicommon9/tk90/admin/AFM; export TK90_AFM
TK90_FONTALIAS=$ORACLE_HOME/guicommon9/tk90/admin; export TK90_FONTALIAS

I tried these steps here:
http://articles.techrepublic.com.com/5100-10878_11-6174105.html
However I don't have a selection called share Windows in my sharing prefs, nor do I have a Utility called Directory Access

Need a PurchaseOrder SmartForm and SAPScript Report.

Hi all:,
I need a sample report for PO for SAPScript and Smartform, I am getting some problems, so I wanna to comapre these reports with my reports, can any one help me plzzzzzzzzzzz.

Hi Naimesh,
Thanks for your quick response.
Here is my SAP SCRIPT ADDRESS window:
In that my requirment :
Ensure that the distance between 2 words must be a minimum of 1 character, a maximum of 3 in Address window.
I didn't understand how to do that with CONDENSE command:
ADDRESS PARAGRAPH AS
TITLE       &ADRS-ANRED&
NAME        &ADRS-NAME1&,&ADRS-NAME2&,&ADRS-NAME3&,&ADRS-NAME4&
STREET      &ADRS-STRAS&
POBOX       &ADRS-PFACH& CODE &ADRS-PSTL2& CITY &ADRS-PFORT&
POSTCODE    &ADRS-PSTLZ&
REGION      &ADRS-REGIO&
CITY        &ADRS-ORT01&, &ADRS-ORT02&
COUNTRY     &ADRS-LAND1&
FROMCOUNTRY &ADRS-INLND&
ENDADDRESS
1) How to add that command in above window. Is it correct?
   Ex: NAME CONDENSE &ADRS-NAME1&
2) If I use CONDENSE command, it displays one space between two words. But in my requirement I need to set up like gap is minimum 1 space and maximaum 3 spaces. Please let me know.
Thanks,
Monica

Reports 6i needs to be displayed in different langauges

Hi all,
Could someone please explain to me how I can have oracle reports (6i) in different langauges. My reports were created in english and now needs to converted to other langauges eg to display the report on the web in German or French.... At the present moment i have the reports displayed using RWCGI60 in IIS web server.
Thanks in advance..

Hi,
Are you linking correclty the "key" structure?
Say, for example:
gs_key-header01 = 'ACCOUNT'.
gs_key-item01 = 'ACCOUNT'.
This should link your two tables by the "account" field.
and the call to the function
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
      EXPORTING
        i_callback_program = sy-repid
        it_fieldcat                 = gt_fieldcat
        i_tabname_header = 'GT_HEADER'
        i_tabname_item       = 'GT_ITEM'
        is_keyinfo                = gs_key
      TABLES
        t_outtab_header    = gt_header
        t_outtab_item      = gt_item
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.

Report need to be displayed and sent to spool

Similar Messages

Maybe you are looking for