Report on Unconfirmed sales orders

Dear Friends,
I have a requirement in which I need to have a report showing all the unconfirmed sales orders and sales order with (Fix delivery date & Quantity) indicator not set.
Is there any standard report to solve the above.
Please advise.
Regards,
Harsh

Hi
I would advise to use status profile at sales order header level.
Such as status 10 - order created/unconfirmed
                       20 - order approved
Now go to se16, type VBAK get field OBJNR and go to JEST Table with OBJNR as input field you can see E0001 X as active, that means orders are unconfirmed.
Based on that an ABAP report can be prepared to list all orders which are unconfirmed.
If helpful please reward
Regards
Ravi

Similar Messages

  • Rescheduling of Unconfirmed Sales Orders

    Dear All,
    I was trying to reschedule the sales orders whose schedule lines are not confirmed using a report SDV03V02 (V_V2) but that picks up the confirmed open sales orders also in the process of rescheduling.
    My issue is I wanted set some indicator where it can pick only unconfirmed sales orders and not all the open sales orders.
    This program is been run in Background daily once so I can not put any specific material number also.
    Please let me know if there is any alternative method to reschedule only unconfirmed sales order other than going for a Z program with required selection screen.
    Appreciate your quick reply on this
    Thank you in advance
    Regards
    Mahesh

    Hi
    V_V2 is a collective rescheduling program as such it will do a reschedule all sales orders except for the ones with the fixed date and qty indicator set.  You alternatives are:
    1.  Take a copy of the V_V2 program and have a programmer change it to suit your requirements
    2.  Set the fix date and qty flag as default in your ATP config and use transaction MASS to set your existing orders.  Then the next time you run V_V2 it will ingore all your confirmed schedule lines.  However, this may cause you as much trouble elsewhere than it solves.
    3.  If the number of sales order is not high you can manually allocate the quantities by using transaction CO06
    Frank

  • Self Updating Report of Open Sales Orders (Maybe Crystal )

    I want a self updating report of Open Sales Order. I want it to refresh constantly. I know that it could be an alarm but it would be executed every # minutes and dont want to. Any ideas ? I dont know Crystal Reports enough but is it posible ?

    Hi ,
    If I were you , I will not be crazy looking at my sales order in every 1 minutes ..I would train my users to check at least 15 minutes.
    I understand what u are trying to do;you  want that customer will see the latest open SO created ..but 15 minutes is good enough time .
    I think you have to check if database size grows up big time ..so far no report has come to me from my clients for this set up .
    make sure you  are not saving an alert into database
    If you are using multiple alerts , I will atleast monitor my database for a while to see i encounter performance issue ..
    So far for one alert at every 15 minutes ..i think u should be fine ..
    Hope this helps
    Bishal

  • Report for viewing Sales order no against delivery date & actual GI date

    Hi Experts,
    Is there any report for viewing Sales order no against delivery date & *actual GI date*
    Because in VL06F , i can only able to get planned GI.
    Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
    Regards,
    Sujit S.

    dear Hrishi,
    i followed your suggestion, but couldn't get desired results,
    here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
    thanks for your valuable reply.
    @ G. Lakshmipathi ;-
    i think i will need to develop z-report for fetching the data from the tables
    VBAK (to get sale order reference) and
    LIKP (to get delivery and actual GI date)
    thanks for your reply,
    Regards,
    Sujit

  • Do we have standard report to show sale order stock with amount?

    Do we have standard report to show sale order stock with amount?
    I try to use MB5B and MBBS but they don't show value.
    MB5B show only qty
    MBBS no any report.
    Please kindly help.
    Thank you very much.

    Okay Thank you very much for your suggestion.
    I think I have to create a new ZProgram. T_T

  • How to devolped an Interactive ALV Report to display sales orders

    hi,
             how to devolped an Interactive ALV Report to display sales orders pertaining to the selected Customers and item details in the secondary list.For this report what are the tables and fields wehave to used give with example.
    thank you
    radhakrishna

    Hi,
    look via se38 for BCALV* and SALV*.
    Try ABAPDOCU.
    Regards, Dieter

  • Unconfirmed Sales Orders should not consume Forecast

    Hi All,
    We have an issue where the Unconfirmed Sales Order consumes the Forecast in APO. As per the requirement we only want to have Consumption of Forecast against the Confirmed Sales Order. Please suggest how we can stop this.
    The Planning Strategy in Product Master is maintained as 20 (PLANNING WITH FINAL ASSEMBLY), corresponding in R/3 is 40.
    fyi, we use APO 3.1. 
    Thanks,
    Aashish

    Hi Aashish,
    You might set the "fixed date and quantity flag" for the unconfirmed items so they will not generate a requirement and thus they will not be transfered to APO. But the order will also never appear in a APO BOP run...
    Another option would be to switch off the consumption in the APO inbound processing (userexit) when a sales order without confirmation arrives.
    best regards,
    Michael

  • Report for open sales order

    Dear all,
    I need to create a open sales order report. Could you please tell me from which table i can get open sales order. Its standard report is VA05 and also I checked in table VBBE. but all record which i get from VA05 are not visible in VBBE table. It means VBBE doesnt carry all pending open records.
    Please guide me from which table i can get it or what is the sriteria to get it?
    Thankyou very much in advance
    Punnet Sharma

    hi,
    my logic goes like this:
    Note: Open cursor is used since we are dealing with huge amnt of data:
    * Select orders based on their Delivery status
      SELECT  vbeln
      FROM vbuk INTO TABLE git_vbuk
          WHERE lfstk = 'A' OR lfstk = 'B' .
    * Filter selected orders
    * Selection using open cursor
      DATA: lwa_op_sal_ord1 TYPE gt_comtab.
      IF sy-subrc = 0.
        OPEN CURSOR c1 FOR
          SELECT vbap~matnr
          FROM vbap INNER JOIN vbak
          ON vbap~vbeln EQ vbak~vbeln
          FOR ALL entries IN git_vbuk
          WHERE vbap~vbeln = git_vbuk-vbeln AND
                vbak~vbtyp = 'C'.
        DO.
          CLEAR lwa_op_sal_ord1.
          FETCH NEXT CURSOR c1 INTO CORRESPONDING FIELDS OF lwa_op_sal_ord1.
          IF sy-subrc = 0.
            APPEND lwa_op_sal_ord1 TO li_op_sal_ord1.
          ELSE.
            CLOSE CURSOR c1.
            EXIT.
          ENDIF.
        ENDDO.
      ENDIF.
    here filter orders based on 'A' and 'B' from VBUK...
    then frm header table VBAK get order for vbtyp ='C'.
    now li_op_sal_ord1 will have open sales orders..
    Moreover as per ur query y do u need the item data frm VBAP as u are only concerned abt VBELN.
    If u need item u hv 2 run another select.
    regards,
    ags

  • Report for Open Sales Orders

    Hi..
    my client want the report for all open sales orders in following manner :
    CUSTOMER NAME         ITEM 1      ITEM 2     ITEM 3  ITEM 4
    Customer 1                     23             45           54          76
    Customer 2                     10             20           30          50
    Customer 3                     40             10           30          10
    TOTAL                            73             75          114        136
    please let me know the sql query which i can put in crystal report to creat this report
    Regards
    Rakhi

    hI rAK
    HERE IS UR QUERY FOR OPENSALES ORDER  I THINK THIS WILL SOLVE UR PROB
    SELECT T0.[DocNum], T0.[DocDate], T2.[CardCode], T2.[CardName], T0.[DocTotal],
    (T0.[GrosProfit]/(T0.[DocTotal]-T0.[GrosProfit])*100)'PROFIT%', T2.[CntctPrsn], T2.[Phone1], T3.[GroupName]
    FROM ORDR T0  INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode
    INNER JOIN OCRG T3 ON T2.GroupCode = T3.GroupCode
    WHERE T0.[DocTotal]!= T0.[GrosProfit] and T0.[DocStatus] ='O'
    GROUP BY T0.[DocNum], T0.[DocDate], T2.[CardCode], T2.[CardName], T0.[DocTotal],
    T0.[GrosProfit], T2.[CntctPrsn], T2.[Phone1], T3.[GroupName]
    REGARDS
    JENNY

  • Report on open sales order ,total sales

    Hello Gurus
    I am developing a report line item wise of sales order in which i need to get
    Suppose a sales order is created on 01.12.2009 for 1000 quantity
    billed quantity in december 600
    billed quantity in january     200
    1) total sales done against this SO line item wise.
    2) sales in this month againt this SO
    3)open order qty as 01.01.2010
    4)last day sales i.e from 01.01.2010 to 20.01.2010 the date of last sales against this SO
    so my output should be
    total sales = 800
    sales in this month =200
    open order qty as on 01.01.2010= 400
    please tell me the logic
    regards
    sphoorthi
    Moderator message - Please do not post your requirements and ask the forum to do your work for you - post locked
    Edited by: Rob Burbank on Jan 20, 2010 10:47 AM

    Hi,
    I gather from your thread that the question is not to build a report on a MP yes/no but more on which MP.
    Depending on the reporting needs and on how well you are able to combine the 2 cubes in the new MP I would say go for the latter option so you have more control on this one MP (for example if you need to add something that is already available in cubes).
    However, when (future!) reporting needs could mean that characteristics need to be added to the report(s) and filtered on that are not in both cubes you will have major problems getting the data properly from new MP and you would be better off using the individuals MP's and combine the data in a workbook or in a web template giving more flexibility.
    So you need to really analyze the requirements and decide on the way forward. Keep in mind possible future requirements because for now it could seem these few fields could be enough but new requirements could directly give a problem.
    Hope this helps
    C.

  • New Report for Opens Sales order and P.O from Plant and S.Loc

    Dear Gurus
    We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
    If you have already developed this kiond of report help me inthis case.
    Thanks
    ramki

    closed

  • Table Name to take report of Open Sales Order items&its relevant GL Number.

    Hi,
    I wanted to take a report with Output as Open Sales Order Items and its relevant GL account numbers. is there any T Code in the Standard or atleast the table name.
    I have already fetched the Open Sales Order Items from T code VA05, but i need the relevant GL account numbers also.
    Any pointers on this will be appreciable.
    Rgds,

    Hi
    There are no standard reports where in you can fetch the data of the open sales order items and its G/L accounts with the output. But  by creating your own report using LIS then it is possible
    Regards
    Srinath

  • Report for Late Sales Order Processing

    Hello all, business want to have a report the shows if sales order are late for processing. Something similar to VL10H for delivery but based on the customer requested delivery date instead of the confirm delivery date in VL10H. Some report that would indicate that the sales order is late and must be process for delivery as soon as possible.
    Is there something similar existing already in SAP ? I don't want to reinvent the wheel !!
    Thanks a lot !
    Mathieu Pagé

    Though, you can always create a quick SAP query using SQVI.
    Join tables VBAK (sales order header), VBAP (item) and VBEP (schedule line) on fields VBELN, POSNR.
    Select all the fields you are interested in and in the selection you can have VBEP-EDATU (schedule line date which you can compare with today's date to see if there are line items), VBEP-BMENG (confirmed qty), VBEP-WMENG (ordered quantity) and lastly the field you are interested in "Customer requested delivery date" VBAK-VDATU

  • Standard report for BLOCKED SALES ORDERS

    Hey friends,
              Do any one of you know whether there is any standard report that shows the Blocked sales orders..??
    thanks in advance,
    Regards,
    Anvita.

    anvitha,
    You have the following transaction available in SAP for showing the sales documents blocked due to different reasons.
    V.14  Sales Orders Blocked for Delivery  
    V23   Sales Documents Blocked for Billing
    VA14L Sales Documents Blocked for Delivery
    VE31  Blocked SD Documents (Export related)               
    VKM1  Blocked SD Documents (Credit Blocked)               
    Check which one will satisfy your requirement.
    Thanks
    Giridhar

  • Standard Report -  ATP Failed Sales Orders

    Please let me know if there is a standard report to get the list of ATP failed sales orders.
    In a case where customer requested delivery date has not confirmed and a new delivery date confirmed which leads another schedule line of the material.
    My requirement is to get the list of all the ATP failed sales orders, where we have two different schedule lines for a material under Item level u2013 u2018schedule linesu2019 tab view.
    Your time highly appreciated.
    Thanks & Regards,
    Victor.

    Hi,
    Proceed as below:
    - Go to SE16
    - Input VBEP
    - Input ' 01 to 02' in Schedule Line Number field
    - Input other data as per your requirement or you can add more fields in selection from settings
    - Then execute
    From above you can get all the documents for which there were two schedule lines generated.
    Hrishi

Maybe you are looking for