Report painter - customer balance not accurate

Hi Expert,
I am using report painter to create a cusomter balance by months for user. I realised that some customers the balance print from this report not tally to debtor ledger balance but some are tallied perfectly. Anybody know the reason?
In report painter I on the row field I chose CUSTOMER on column name with SET or Hierarchy note on, variable on, General data selection Ledger = F2, Record Type = 0, Version = 1.
SAP R/3 4.6C
thank you

Hi
Check the SET' used in that - Check any other selections filtering some of the line items (may be the cost centers, profit centers, etc.,) - Take one customer showing inaccurate figures and check all line items, try to identify the difference where exactly.
VVR

Similar Messages

Report Painter - Account descriptions not showing

Hi guys...I have created a balance sheet in report painter, using a library based on table FAGLFLEXT. this table does not have account descriptions in it, but only account number. The client wants to see the account description as well. Is there a way I include that in my report? Since we are using the new GL, i have used FAGLFLEXT. Please advise how I can accomplish this...can I use a view or a table join between FAGLFLEXT and SKA1?
please help
thanks
Brian

Dear Brain,
In the report painter, GRR2, select your report and go to
Formatting > Section layout
Select the lead column tab
Here in the Contents field, select "Key and description"
That would resolve the issue.
regards
Venkatesh
assign points if useful

Report painter un balanced in balance sheet

Dear Experts,
can you please help me
When i run report painter In T C : GRR3, i saw balance sheet balance is unbalanced that is liablities is not matched to assets . it shows out of balance .
How i can verify this unbalanced amount
Regards
Bhaskar

Hi ,
Can uyou please explain me , how to check asset line item and GL line item in which T C and how to reconcil
Regards
Bhaskar

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

Report painter- Characteristic can not be maintained with key figures

We have added new characteristic ZZFIELD1 in CCSS report sructure for reporting and selected it in gen. selection list. While running report painter report, it gives an error that ZZFIELD1 cannot be combined with key figures.
Any help to figure out what step is missing will be highly appreciated.
This is a PS report painter report using PS database profile in the selection of parameters for the report
Thanks

The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

INVENTORY REPORT for customer but not consignment company owned

HI Everyone,
I am working on creating an inventory report and sending it out to a customer.
We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
The above process is a scenario that still needs to be worked on...
THe customer should be able to look at only his stock and not any other stock....
Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
If there i a better way through which this can eb done please suggest me... thank you..
Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
Thanks & regards
AHP.

Customer balance not able to clear in APP (F110)

Hi,
We have 4 line items in a document as follows:
PK               Amount
04                      40.12 (Opening balance)
17                   4838758.27-
17                   1531556.00-
27                   6370274.15
The above document Customer & Vendor both are there and 3 line items are cleared.
1st line item 40.12 is debit balance and it is not cleared,
we put the baseline date as 24.05.2008 and we ran the F110 job and this item is going to exception list.
(It is showing Discount base 40.12 & No pymt possible because items with a debit bal.still exist)
Can you please let me know why this is going to Execption list.
Best reagards,
Madhusudhan

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

FSV not assigned accounts in Report Painter

Hi
I created one report through Report painter for Balance display.
After Execution of the report in Drilldown many Balance sheet G/Ls are showing as not assigned in the report.
As they are assigned in the Financial statement version.The G/Ls not assigned are the Balance Sheet G/L.
Thanks

Hi,
Can you please check the financial statement version which might have been included in the general data section of the report or the column characteristics. Also check the row element/ cell element defination.
Regards,
Gaurav

How to get Daily Customer Balance Report?

Hi
I have received a requirement from the user where he has to send the Daily Customer balance report currently he is using the T.Code S_ALR_87012172 Customer Balances in Local Currency for fetching the monthly data.
I want to know what are the ways to make the report and what is the best way out of them to do it. Can it be done through user Exit, BADI, query or we have to get the Z report made by the apaber.
Also, if it is possible please tell me the way step by step for user exit, badi or query if that is to be used.
Please help
Thanks in advance
Pankaj

Thanks for your reply Aleksey...
We are using the report S_ALR_87012172 - Customer Balances in Local Currency and user want the same report on daily basis like Total Debit/Credit, Balance carryforward and the Accumulated balance. I have checked but unable to find out any such output.
Please suggest what to do whether to make chnges in report painter or have to write a query. If I write a query then plz suggest me the tables as I am trying to do that but unable to link the Balance carryforward and accumulated balance.
Regards
Pankaj

How can i have customer balance report at Ship to Party Level

HI All
My client want to have a report for customer balances at ship to party level
For example for a customer ABC has 4 ship to party and they want to track Sales at each ship to party level for Customer ABC
Regards
Sandip

Thanks Buddi,
Partner function SB works the way we wanted it to.
Regards

Dynamic field in S_ALR_87012172 - Customer Balances in Local Currency?

Hi,
My problem is that we want to add the document Numnber field in the report S_ALR_87012172 - Customer Balances in Local Currency so that we can get the desired output. I have tried to add the Document number field under 'Documents' in the Dynamic Selection using table BSID. When we are adding it it is working fine for all other reports for customer balances but not showing anything here.
Please tell me the reason why it is happening if possible and tell me how to get that field added.
Please reply asap as it is quite urgent.
Thanks in advance
Regards
Pankaj

Thanks again Ravi,
I have tried that option and made the Form and Report but when I am trying to Excute the report S_ALR_87012172 - Customer Balances in Local Currency it is not coming with the desired output. Is it the link problem. Can you plz tell me we have made a form and then a report with the desired parameters but how to link that report with the desired T. Code.
Secondly, if I make the changes in the Standard reports which are mentioned below then system is taking the changes but when I am making the new form and report myself then system is giviing me the desired output. Can we make our own report and link it to the T. code we want or we only can make the changes in the standard reports .
0SAPFD10-01     Transaction Figures: Account Balance
0SAPFD10-02     Transaction Figures: Special Sales
0SAPFD10-03     Transaction Figures: Sales
Please help me as I don;t know much about the report painter.
Thanks in advance..
Regards
Pankaj

S_ALR_87012247 - Customer Balances and Line Items in Local Currency

Hi All,
This report S_ALR_87012247 - Customer Balances and Line Items in Local Currency is not displaying line items for customers in ECC6. Is there any configuration required to get the line items? Please help
Thanks
Sridevi

If you see this report S_ALR_87009950, you will get
Opening Balance at the start of fiscal year
Debits and Credit during the reporting period
and the Cumulative Balance.
Please note the above report will not give you line item details.
S_ALR_87012247 report is specifically for poland, in the description it is mentioned that the line items will be displayed, unfortunately, for other countries, there are no line items visible. Therefore, you may explore the possibility of copying this report and changing the code in order to bring the line items along with the totals.

Report Painter for Non Leading Ledger (Error GH113)

Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
Thanks

Hi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks

Report Painter for B/S , P&L statements

Hii gurus
this is ramki...
Plssss help me in the making of Report painter for Balance Sheet and Profit And Loss Statements , as of now i didn't did Report Painter .
I have tried no.of times , i dont know the confg also...
My client is asking DR & Cr columns for the statements..
can any body plsssss forward to me report painter confg documentation...( atleat for base level confg )
helpers will b great appreciateble..
thanks in advance
regards
ramki

Hi
i am sending you a sample of how to createa report in report painter follow it,
Main Steps in Creating a Report Using Report Painter
The illustration below shows the main steps in creating a report with Report Painter:
In this section, you learn how to create a Profit Center Accounting (PCA) report with Report Painter.
For these sample reports, you should focus on the tables that correspond to the SAP application areas with which you are working. The examples shown in this section have been created in Release 4.6C.
Sample Report for Gross Profit Margin
Bungee Corporation wants to use Report Painter to create a gross margin report. This Profit Center Accounting report uses data table GLPCT. The desired PCA report displays the gross margin for each profit center.
Below is an illustration of the completed gross margin report.
Prerequisites to Creating a Report with Report Painter
Before you can create a report with Report Painter, you need to:
     Determine the table
     Find the library
     Create sets
     Create variables
The following sections explain these prerequisites.
Determine the Table
Before you can start creating the report, you must decide on the table you need to use. In this example, we use table GLPCT in Profit Center Accounting.
Find the Library
Determine the library you want to use for the desired table.
If you need to create a library, on the SAP Easy Access screen, either:
     From the navigation menu, choose SAP menu → Information systems → Ad hoc reports → Report painter → Report Writer → Library → Create.
     In the Command field, enter transaction GR21 and choose .
In our example, we use existing library 8A2 for creating a report.
Create Sets
Create the required sets for your report. To create a set, on the SAP Easy Access screen, either:
     From the navigation menu, choose SAP menu → Information systems → Ad hoc reports → Report painter → Report Writer → Set → Create.
     In the Command field, enter transaction GS01 and choose .
Note that this procedure is not necessary for creating the report given in the example that follows.
Create Variables
Create any variables for the fields that must be entered before the report is executed. To create a variable, on the SAP Easy Access screen, either:
     From the navigation menu, choose SAP menu → Information systems → Ad hoc reports → Report painter → Report Writer → Variable → Create.
     In the Command field, enter transaction GS11 and choose .
Note that this procedure is not necessary for the sample report in the next section.
Creating a Report with Report Painter
When you are ready to create the report using Report Painter, use the following steps.
Example Task: Creating a report using Report Painter
1.     On the SAP Easy Access screen, either:
o     From the navigation menu, choose: SAP menu → Information systems → Ad hoc reports → Report painter → Report → Create.
o     In the Command field, enter transaction GRR1 and choose .
2.     On the Report Painter: Create Report screen:
a.     In Library, enter the name of the library to be used for the report (for this example, 8A2).
b.     In the Report, enter a name for your report and a short text description.
c.     Choose Create.
1.
To help you better understand how to create a report in Report Painter, the next procedures explain the varying substeps. You can either:
o     Define the rows (or rows with a formula)
o     Define the columns (or columns with a formula)
o     Define the general data selection
Define Rows
Example Task: Defining rows (including defining a row with a formula)
To start defining the rows, on the Report Painter: Create Report screen, double click on Row
On the Element definition: Row1 dialog box:
a.     To include characteristics in the first row of the report, select the desired characteristics in the Available characteristics frame (for example, Account number)
b.     Use to transfer the chosen characteristic to the Selected characteristics frame.
c.     In From, enter the account number(s) you want to include in the row definition. Either enter to and from values or a group set (for example, the value 800000).
d.     To enter the row heading, choose
On the Text maintenance dialog box:
a.     In Short, enter the desired short text (for example, Revenue).
b.     To copy the short text into the Medium and Long text fields, choose Copy short text.
c.     To continue, choose
On the Element definition: Row1 dialog box:
a.     To check if the selection is correct, choose Check.
b.     To transfer the selection to the row 1 definition, choose Confirm.
You have now defined the first row.
To define the second row for costs, on the Report Painter: Create Report screen, double-click on Row 2.
On the Select element type dialog box:
a.     Select Characteristics.
b.     Choose
On the Element definition Row 2 dialog box:
a.     To include characteristics in the second row of the report, select the desired characteristics in the Available characteristics frame (for example, Account number)
b.     Use to transfer the chosen characteristic to the Selected characteristics frame.
c.     In From and To, enter the account number(s) you want to include in the row definition (for example, 400000 and 490000).
d.     To enter the row heading, choose
On the Text maintenance dialog box:
a.     In Short, enter the desired short text (for example, Costs).
b.     Choose Copy short text to copy the short text into the Medium and Long text fields.
c.     To continue, choose
On the Report Painter: Create Report screen:
a.     You can now choose to add further rows with other required characteristics. In this example, you can create a formula in the third row.
b.     Double-click on Row 3.
On the Select element type screen:
                   a. Select Formula as the row element type.
                   b. Choose
On the Enter Formula screen:
a.     Enter the formula for Row 3. You can either type it in or use your mouse and the formula components buttons. If you type the formula, do not forget the spaces. In this example, Y001 and Y002 represent Revenue and Costs respectively.
b.     To check the correctness of the formula, choose Check.
c.     Choose
On the resulting Text maintenance dialog box:
a.     In Short field, enter the text for the formula field (for example, Gross Marg).
b.     In Medium and Long fields, enter the required text (for example, Gross Margin).
c.     Choose .
You have now defined three rows (Revenue, Costs, and Gross Margin).
Define Columns
Example Task: Defining columns
On the Report Painter: Create Report screen, double-click on the first column, Column 1.
On the Select Element Type (not shown) dialog box:
a.     Select Key Figure with characteristics.
b.     Choose .
On the Element definition: Column 1 dialog box:
c.     In the Basic Key figure field, use the dropdown to select Amount in company code curr.
d.     In the Available Characteristics frame, select the desired characteristic for column 1 (for example, Fiscal Year).
If you want to be prompted for the fiscal year at the time of running the report, you must make this a variable instead of a value.
e.     Choose to move the desired characteristic to the selected characteristics frame (for example, Fiscal year).
f.     Place your cursor in the From value field and select the checkbox to the left under (variable on/off).
g.     To view the possible entries for the From field, choose .
h.     From the resulting selection dialog box:
     Select a variable from the list of available variables (for example, CYear).
     Choose .
i.     On the Element definition dialog box, choose .
j.     On the resulting Text maintenance dialog box:
     In Short, enter a text for the column header (for example, Curr Year).
     To copy the short text to Medium and Long text fields, choose the Copy short text button.
     Choose .
Now you have defined the column 1 for your report.
k.     Back on the Element definition dialog box, choose Confirm.
On the Report Painter: Create Report screen, define column 2 and all other columns you choose to define. You can define these columns either by:
o     Repeating steps for column 1
o     Copying columns
o     Entering a formula that calculates the difference between columns (for example, between Current Year and Prior Year [variable is Pyear] in a column called Variance)
Adding a column or formula is similar to adding a row formula. After defining the rows and the columns, the screen would appear as follows.
General Data Selection
After you define the rows and columns, define the general data selection screen for the report.
Example Task: Defining the general data selection screen for the report
1.     On the Report Painter: Create Report screen, from the menu bar, choose Edit → General data selection.
2.     On the Element definition: General data selection screen:
a.     From the Available characteristics frame, select the fields to add to the general data selection as shown.
b.     Choose to move the selections into the Selected characteristics frame.
c.     Enter the values for each field. (For example, the standard ledger for PCA is 8A to 8E and the U.S. company code in IDES is 3000. This example is a year-to-date report, so all 12 periods are in the range. The standard Version in PCA is 0, the Record type for actual dollars is 0, and CO is 2000).
d.     To check the selections, choose Check.
e.     To create the definition for the general data selection for the report, choose Confirm.
      3.   On the Report Painter: Change Report screen:
a.     To save the report, choose
To include the report into a report group, choose Environment → Assign report group.
      1.     On the Insert Report in Report Group dialog box:
a.     In Report group, enter a report group name (for example, ZTGR).
b.     Choose .
2.     On the Create report group dialog box, choose Yes to create and assign to a new report group.
Display and Execute the Report
Example Task: Displaying the report you created in the previous steps
1.     On the SAP Easy Access screen, either:
o     From the navigation menu, choose: SAP menu → Information systems → Ad hoc reports → Report painter → Report → Display.
o     In the Command field, enter transaction GRR3 and choose .
2.     On the Report Painter: Display Report screen:
a.     Double-click on your report.
b.     Review the report display.
c.     To execute the report, from the application toolbar, choose execute.
On the Selection screen:
a.     Enter the variables used to execute the report (for example, Current Year 2000 and Last Fiscal Year as 1999).
b.     On the application toolbar, choose execute.
The report appears. You have successfully created a report in Report Painter.
You can also execute the report through the report group (for example, ZTGR).
1.     On the SAP Easy Access screen, choose SAP menu → Information systems → Ad hoc reports → Report Painter → Report Writer → Report group → Execute or in the Command field, enter transaction GR55 and choose
2.     On the Execute Report Group: Initial Screen:
o     In Report Group, use to select a report group.
o     Choose .
3.     On the next screen, enter appropriate values and choose .
4.     On the next screen, from the menu bar, choose:
o     Settings → Column attributes to change the column attributes such as changing the column width, setting the scaling factor, and setting decimal place numbering for number display.
o     Settings → Summation levels to specify a range of summation levels for which totals will display.
o     Settings → Print page format to change the layout of the report output.
5.     To transfer the report to Microsoft Excel or Lotus 123, from the application toolbar, choose .
6.     On the Options dialog box, select the radio button of your choice and choose . Note that for the report to open in Microsoft Excel or Lotus 123, you need to have these applications installed on your PC.
7.     To get back to the original display of the report, select Inactive on the Options dialog box.
Understanding the Report List
After executing a Report Painter report, several additional functions can be applied to the output to make your reports as meaningful as possible. You can:
     Sort on each column.
     Highlight rows that meet the threshold criteria, for example any amount greater than 6,000.
     Drill down from any line item. Drilling down you can access ABAP programs, transaction codes, SAP Queries, drilldown reports, or other Report Painter and Report Writer reports.
     Launch SAP Graphics.
     Send the report through SAP mail.
     Save as an extract to be brought up later.
     Expand and collapse rows.
     Change the layout settings.
     Display the report in Microsoft Excel with office integration.
hope this gives you an idea, and send me an email to [email protected] i will send you a doc on it,
if this was helpful then assign points ..
regards
Jay

Report painter issue

Hi All,
I need to create a report using report painter.
Requirement goes like this:
1) A report of quantities on a cost center against a cost element.
2)The quantities should be for each month from jan to Dec
I have used SMEG (QUANTITY) as the Basic Key figure.
General Selection:
Version     0
Fiscal year     1GJAHR     Fiscal Year
Value type     4
CO area     0002
Cost center     1KOSET     Cost center group
I am trying to get the quantity (MENGE) booked using F-02 on a cost center.
But my problem is that, against a cost center there are many other quantities booked.
I am not getting the output as my report painter query is not using COEP table and my data is available on COEP table.It queries COSS & COSP
Is there is a way that i can use my report painter queiry this table.
Regards
Rahman

reolved

Report painter - customer balance not accurate

Similar Messages

Maybe you are looking for