Report prints on printer X, not on printer Y

Post Author: Vint
CA Forum: .NET
Folks,
My Visual Studio 2003 application containing a Crystal Report (bundled version) prints fine to a networked HP Color Laser Jet 3800dtn, but will not print to an HP Business Ink Jet 2280tn. Each was tested as the default printer.
Any ideas as to why?
Thanks,
Vint

Assuming that you are grouping on Category, there are two places where it is possible to set this.
1. Right-click in the gray area to the left of the group header and select "Change Group". Go to the Options tab and verify that "New Page After" is not turned on. Close.
2. Right-click in the gray area to the left of the group footer and select "Section Expert". Go to the Paging tab and verify that "New Page After" is not turned on. You might also want to check other sections and verify that there is no paging set up elsewhere.
-Dell

Similar Messages

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

Hyperion Financial Reporting-Print Service is not Starting-11.1.2.1

Hi,
We are using Hyperion 11.1.2.1 and when i look at my Hyperion Financial Reporting-Print service it shows me at stopping and when i right click to stop/start it the options are greyed out.
I have completely stopped all the hyperion services and started them again and now the HFR Print service is showing me as Starting.
Kindly help me what should i do to resolve this issue.
You can see the screen shot at my blog.
http://hyperion-consulting.blogspot.in/2012/08/hi-we-are-using-hyperion-11.html
Regards,
AS
Edited by: Don'tKnow999 on Aug 30, 2012 9:52 PM

Hi John,
Thanks a lot for your reply. I saw the log file however i am not able to understand where the issue lies. Can you kindly hlep me out. Below is the FRPrintLogging.log
[2012-08-31T02:42:54.565-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T02:42:54.565-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:12:21.914-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Oracle Workspace
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Copyright&#169 2000, 2011 Oracle and / or its affiliates.
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] All Rights Reserved.
[2012-08-31T03:13:46.993-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:249)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:80)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:122)
     at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
     at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.011-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.025-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
]]

(( Hello -ENABLE REPORT PRINTING - OPTION NOT SHOWING ))

2010-07-28
Hello,
I am trying to print a report in APEX 4.0
using the free account APEX.ORACLE.COM .
I learning how to do this using the tutorial at:
http://st-curriculum.oracle.com/obe/db/apex/r40/apexstart/apexstart_b/apexstart_b_ll.htm
In the tutorial it says:
(about 40% down the page)
17 .
Select Yes in the ****Enable Report Printing**** drop-down menu and select Portrait in the Orientation drop-down menu under Page Attributes. Then click the Page Header tab.
The screenshot the tutorial shows looks like this:
HTTP://mankindwins.com/__7700-2900-APEX-GLOBAL-201/850-500-SCREENSHOTS-FOR-EMAILS-203/ENABLE-REPORT-PRINTING--SCREENSHOT-FROM-TUTORIAL.jpg
However, when I go into the page for my application, the screen looks
like this:
HTTP://mankindwins.com/__7700-2900-APEX-GLOBAL-201/850-500-SCREENSHOTS-FOR-EMAILS-203/PRINT-ATTRIBUTES--FROM-INSIDE-APEX-PAGE.jpg
As you can see, there is no option for:
****ENABLE REPORT PRINTING****
What do I have to do this make this option appear?
How do I get the
****ENABLE REPORT PRINTING****
option to appear?
I believe I saw something somewhere that said you had to do
so-and-so to ****enable report printing****.
How do you do this?
Thanks for your help!
DAVID888
Edited by: DAVID888 on Jul 28, 2010 11:30 PM

Hi,
What model number is listed o the back of the printer?
The HP Wireless Direct feature is only available for the CE658A model, not for the CE657A model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Report printer was not valid, switching to default printer.

We are using a Crystal Report viewer in Tomcat. Everything works but sometimes in the Tomcat log we get the following error:
ERROR com.crystaldecisions.reports.reportdefinition.ReportDefinition - Report printer was not valid, switching to default printer.
Is there a way to stop this error from being reported? If not, is it safe to ignore since everything appears to be working fine?

Generally safe to ignore, unless of course you want to print to that printer
Just means report was designed connected to specific printer which is not available where you are now publishing report. YOu could try going into printer set up and selecting No Printer.
Ian

File name field not generating dynamic file name for report printing

Hello Folks,
I have a report region on a page and have enabled report printing. I would like to have the file name generated dynamically. So, I add the substitution string, say "&P1_CUSTOMER_NAME." (no quotes). The output file I get is literally named "&P1_CUSTOMER_NAME..pdf" (no quotes).
I have seen several posts suggesting the file name field should accept this syntax but, I cannot get it to work.
We are running Application Express 3.2.0.00.27 and BI Publisher.
Any suggestions?
Thanks for your help.
-Markus B.

I was finally able to make it work using a page process and the APEX_UTIL.DOWNLOAD_PRINT_DOCUMENT with a submit button.
-Markus B.

Report Printing - Excel error

Hi all,
I'm not sure what's causing this error.
With a regular report (not Interactive) region, I have enabled the report printing. All file types open/save correctly except for Excel.
When opening the file, Microsoft Excel actually pops up this error:
File cannot be opened because:
The server did not understand the request, or the request was invalid.
Error processing resource 'http://www.w3.org/TR/xhmtl1/DTD/xhtml1-strict.dtd'.
Line 3, Position 57.
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">If I save the file and try to open it, Excel pops up this error:
This XML file cannot be opened because of an error. Check to make sure the file is a valid XML file, and that the XML syntax is correct.
You can also try re-creating the file and closing other applications before you attempt to open it again.Excel version is Excel 2002 SP3 (v10.x).
Some additional info that might be helpful:
When Excel is opening, the status bar shows it is "Opening HTML.XLA", the shows "Opening {filename}.xls" but fails halfway through that.
Any ideas?
Chris

Hi Chris,
This is the output I get when I click on the Print link
<?xml version="1.0" encoding="UTF-8"?>
<DOCUMENT>
    <DATE>04-AUG-08</DATE>
    <USER_NAME>nobody</USER_NAME>
    <APP_ID>17977</APP_ID>
    <APP_NAME>Test Export</APP_NAME>
    <PAGE_ID>1</PAGE_ID>
    <TITLE>Page 1</TITLE>
    <P1_ROWS></P1_ROWS>
    <P1_GO></P1_GO>
    <P1_REPORT_SEARCH></P1_REPORT_SEARCH>
    <REGION ID="4149756408582108901">
        <ROWSET>
            <ROW>
                <COL1>value1</COL1>
                <COL2>value2</COL2>
                <COL3>value3</COL3>
            </ROW>
            <ROW>
                <COL1>value12</COL1>
                <COL2>value22</COL2>
                <COL3>value32</COL3>
            </ROW>
        </ROWSET>
    </REGION>
</DOCUMENT>Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/

Dunning Report Print Layout Issue

Hi
I have a problem with the Dunning Report Print layout (Dunning All (system)). In the wizard I select all the Invoices (Which are over due and current) for the BP and sent to printer.
In the print out all the due dates are mixed with the acctual Due dates.
Acctuall Invoices
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     25.02.08              1
10002                     03.03.08              1
10003                     03.04.08              0
Print out
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     03.03.08              1
10002                     03.04.08              0
10003                     25.02.08              1
How can I fix this. This is coming from the System template and we havent change anything.
Could you please help me.
Thanks
Sanjaya

Hi
I solved the problem. But the issue was when i ran the dunning wizard the layouts messed up. For example if I had a dunning letter with 3 lines (overdue documents). The last line would copy itself 4-6 times (it would show the last document 4-6times so the total lines in the dunning letter would be 7-9 lines). But I solve the issue. Somehow the attention person (which I got from the contact persons (ocrp) and not from the document contact person (oinv) ) did the issue. When i switch it to the oinv the issue was gone.
kind regards
Søren
Edited by: Bundgaard Søren Hollænder on Jan 26, 2009 9:56 AM

How to suppress extra form feed for character report printing using ORARRP?

Dear All,
We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
I shall be highly obliged if anyone could reply to my queries ASAP.
Regards,
KrishnaKumar S

Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

Report printing on continous stationery.

Hi!,
I am having a problem with report printing, say if a report is of tabular type and say extands upto 5 pages , I have left some spacing in header section for Company name & logo. It is all okay while running the report on the screen, but while printing the first page comes proper, then on the second page the distance to be left at top reduces and correspondingly goes on reducing on the forthcoming pages and son on., untill it moves to the preceeding page.
My mailid is [email protected]
Pankaj

hi,
you have to set the margin to the paper size u want to print. and u have to set the section width and heigth to the paper size. then it will work properly.
i have used this.
if ur problem is not solved yet.
mail me for any help. my mail id is [email protected]
bye
natesh

Report Printing: APEX 4.01 - APEX Listener - WebLogic 10.3.3

We have some report printing issues...
Our configuration is APEX 4.01 using the APEX Listener with WebLogic 10.3.3.
The first issue is that under "Print Attributes" the following is listed in red under "Printing":
"Report printing is currently not available, there is no print server configured."
The second one is that we need to print pdf format and I have not found a solution for doing this with the APEX Listener and WebLogic. I saw that the FOP solution for the APEX Listener didn't make it into the current release... Is there any way to do pdf type reports with the current APEX listener technology?
The third issue is that in the demo app when running a report there is a "Error loading file:" type error with "FLOW_FLASH_CHART" and apex_util.flash as part of the url.
Any help would be appreciated...
Thanks!
- Scott

I deployed in WebLogic the fop.war that came with APEX 4.0.1 and it got rid of the error message, but when I tried to download a report as pdf, I got an error saying it was corrupted or invalid. I downloaded the file it produced and opened it in a text editor. It was a small html type file with the following URL:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
When I go to the URL that I think it should be going to based on what I put into Instance settings> Report Printing, I get:
Compilation of JSP File '/apex_fop.jsp' failed:
apex_fop.jsp:5:18: The import oracle.xml cannot be resolved
<%@ page import='oracle.xml.parser.v2.XMLDocument'%>
^------------------------------^
apex_fop.jsp:6:18: The import oracle.xml cannot be resolved
<%@ page import='oracle.xml.parser.v2.XSLProcessor'%>
^-------------------------------^
apex_fop.jsp:7:18: The import oracle.xml cannot be resolved
<%@ page import='oracle.xml.parser.v2.XSLStylesheet'%>
^--------------------------------^
apex_fop.jsp:8:18: The import oracle.xml cannot be resolved
<%@ page import='oracle.xml.parser.v2.DOMParser'%>
^----------------------------^
apex_fop.jsp:12:1: XMLDocument cannot be resolved to a type
XMLDocument v_doc;
^--------^
apex_fop.jsp:13:1: XSLStylesheet cannot be resolved to a type
XSLStylesheet v_xsl = null;
^----------^
apex_fop.jsp:15:1: DOMParser cannot be resolved to a type
DOMParser parser = new DOMParser();
^------^
apex_fop.jsp:15:28: DOMParser cannot be resolved to a type
DOMParser parser = new DOMParser();
^------^
apex_fop.jsp:16:1: XSLProcessor cannot be resolved to a type
XSLProcessor processor = new XSLProcessor();
^---------^
apex_fop.jsp:16:30: XSLProcessor cannot be resolved to a type
XSLProcessor processor = new XSLProcessor();
^---------^
apex_fop.jsp:21:13: XSLStylesheet cannot be resolved to a type
v_xsl = new XSLStylesheet(new java.io.StringReader(request.getParamet

Report print attributes - custom report layout

Hi there,
I've looked for this information in the web and in this forum without luck so far...
We have here BI Publisher and I use the "Enable Report Printing" option in a traditional report in Apex 4.0.2. That works great.
But instead of using the "Default Report Layout", I want to use a custom one based on a RTF file. However I have no idea what the data XML looks like in order to build a custom layout.
To be clear: if you go to Shared Components > Report Queries, you have a Download XML Data option so you can build your report layout based on the XML structure. For instance, you can use <?for-each:ROWSET1_ROW?>, <?COLUMN_NAME?> etc
Any ideas about what that XML structure is for a traditional report?
Thanks
Luis

Found it: change temporarily the output format to XML and download the report. The XML structure is all there. Very helpful to know that all page items are included in the XML as well. It would be good to have this functionality detailed somewhere in the Apex documentation.
What I still need to know is how to access the substitution strings below in my RTF (NOT XSL-FO) template:
Select Default Report Layout to use the built-in generic report layout.
To use a custom generic report layout, select it from the list.
You can use the following substitution strings when building custom XSL-FO report layouts:
#PAGE_HEADER#
#PAGE_HEADERFONT_COLOR#
#PAGE_HEADER_FONT_FAMILY#
...Any ideas?

Transaction Journal Report - Print Layout Design

Hi all
Is it possible to add Journal Entry Project Codes to this Transaction Journal Report (Print Layout Design)?
I tried to add Journal Entry Project Codes to this system PLD but the result still not showing any Project Code.
Kedalene

Hi Kedalene Chong
ou don't need a list of variables to use them. Simply go to View -> System Information so whenever you hover around a field with the cursor, in the left bottom corner of the screen you will see the details of that screen along with the variable number if it is a variable.
So you will see something like:
[Form=139 Item=29 Pane=0 Variable=91]
-> in this case the variable number is 91 - use it in Print Layout Designer.
So you can just use the variable specified in these details. When creating the print layout, just go back to your form, stand on a field with your mouse and you will see what variable to use.
Also Check with the PLD Variables Note No 867048...
Symptom
Using system variables when designing a print template for the General Ledger report.
Please note that variable numbers might change when upgrading to a higher version.
Cause
FAQ
Solution
Field Name
Variable Number
Posting Date
62
Due Date
63
Document Date
112
Series
140
Document Number
141
Transaction Number
65
Journal Voucher
66
Reference 1
67
Reference 2
68
Reference 3
69
Details
70
Transaction Code
71
Project Code
72
Costing Code
73
Offsetting Account
74
Indicator
137
Total (LC)
75
Debit (LC)
96
Credit (LC)
95
Balance (LC)
76
Total (SC)
77
Debit (SC)
98
Credit (SC)
97
Balance (SC)
78
Total (FC)
79
Debit (FC)
100
Credit (FC)
99
Balance (FC)
80
Creator
138
Internal Reconciliation
131
External Reconciliation
132
System variables from the Business Partner Master Data window available for use in the General Ledger report:
Phone
117
Fax
118
Contact Name
119
Address
120
Sales Employee
133
Remarks
134
Full Address
135
Hope Hepful
Regards
Kennedy

Crystal Report Printing - A4 Issue

Hello Experts,
One of our customers use third party rental add-on with SAP B1. The add-on has cyrstal reports files. All these reports are set to letter size by default in report page setup. Client does not to print in A4 .
When the user clicks on Print Preview / Print Icon on rental order the , the report loads, but when sent to Printer for printing it becomes A4 (It should be letter).
The rental reports works fine on the SAP Server, meaning when sent to printer it goes as Letter size which is what we want but this does not happen at Client's machine's.
Also , i have an add-on running on my local machine and the reports prints in letter size with out any issue. I have been searching online regarding this issue but i haven't found any solution.
Can any one advise me on this issue. Is there any setting that i can do in crystal or printer ?

Is the default page size for the client's printer set at Letter or A4?

Report prints on printer X, not on printer Y

Similar Messages

Maybe you are looking for