Report-start only by pressing on go button, not by entering page

I got a page where a long-running report is located. Normally, you would limit the report. But when I click now on the tab unlimited report starts immediately.
How can I change this behaviour, that the report only starts by pressing a specific go-button on the page ?

Hi,
Unless I'm misunderstanding you want to hide the report until a go button is pressed. There are number of different ways to achieve this, below is one that would work.
To do this you could create a button in a separate region on the page, then add a branch based on the button and set a request value of GO.
Then in the report itself under conditions choose REQUEST = EXPRESSION 1 and in the expression 1 field add GO and this should achieve what your trying to do.
Thanks
Paul

Similar Messages

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Icloud download is incomplete. When I load the control panel it only partially loads. I do not get the page that offers feature

icloud download is incomplete. When I load the control panel it only partially loads. I do not get the page that offers features. Also when I look in my Windows Programs it shows that the icloud program has loaded 80MB vs 42MB. Can someone pelase help

Uninstall iCloud and reinstall it (reboot in between)

View any report by presing button not when the page rendered by default

hi all,
i am new in apex and i need in help to solve the below issue:
the reports in apex are shown when the page called by default,
i want that the report will show only when i press any button to show it not when the page requested.
hope i can get some solutions here.
regards
adnan

Position the button ("Go", for example) in a region that always appear by default.
Your report should be in a different region, but conditionally renders only when button Go is pressed (aka, request triggered by the button is activated)... or only when some parameter is not blank, whatever the condition you want to create.
Edited by: Kleber M on Oct 7, 2011 7:33 AM

HT1320 Hi, I have an Ipod nano which is nearly 12mths old. Recently ths shuffle aspect has not been working and the same piece of music plays over and over and can only move onto the next music only by pressing the manual button to move onto the next mus

Hi
I have an Ipod nano which is nearly 12mths old. Recently the shuffle aspect has not been working and I have to manually press the forward arrows on the screen to move onto the next piece of music. If i dont press the forward arrows the same piece of music plays over and over.
regards
jamie

Hello
Tap the screen when playing a song and you should see playback options and tap the repeat until it is white. When it is blue it on repeat and if it has a 1 on it then it is repeating the same song over and over again.
iPod Nano
http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
Regards,
-Norm G.

How do I get the Questions in the Survey to show up in the Report? Only the answers are showing up, not the Questions....

I only know how to input them manually, and I am sure there must be another way?
Kind regards,
Renata

Hi Ellen,
Is your Router brodcasting it's SSID?
If not, try this, click on the Airport icon, choose Other, fill in the info.

Why are my radio buttons not renaming in pages spawned from a hidden template?

Hi Everyone,
I am new to PDF forms, and have never before tried to use JavaScripts. However, I have been able to learn a lot and I have followed many threads and have almost accomplished what I want, but have hit a block. I don't understand the JavaScript well enough to locate my problem. Your help is greatly appreciated.
SYSTEM SPECS: Adobe Acrobat X Pro Mac OS 10.8.5
WHAT I WANT: To create a multi-page (100 pages) form for grading student assignments. Each page must have the same fields, but as each page belongs to a new student, it needs to have different values in the fields on different pages. Each page has 4 questions to score, with 4 score possibilities for each question (0, 1, 2, 3 points), and so only one score should be able to be selected per question.
WHAT I HAVE DONE, following the directions on this thread (Re: Multiple pages form) ):
1) Created a form with a field for student name and 4 sets of radio buttons (Labeled Questions 1-4, with score choices 0-3).
2) Placed a button at the bottom of the page that will spawn a new page and rename fields.
3) Defined this page as a template.
4) Spawned a page.
5) Made the template "hidden."
THE PROBLEM: Steps 1-4 above work perfectly--as long as the template (named "Form") is visible, when I click the button, a new page generates and the student name field renames the fields on Page 2 to "P2.Form.Student ID #" and the radio buttons rename to "P2.Form.Question 1" etc. Each time I press the button, it renames everything appropriately.
However, if I hide the template, then when I click the button on page 1, the fields on Page 2 are renamed to "P1.Form.StudentID ##1." AND THE RADIO BUTTONS DO NOT RENAME. They get the name "P1.Form.Question 1" etc. So the student name field did rename in a way that allows me to enter a new name on each page, but it isn't actually reflecting that I am on page 2, and as for the radio buttons, at that point, I cannot enter different scores on different pages because they are all part of the same radio button grouping.
If I use check boxes, they rename similarly to the student ID field, but I don't want to use check boxes because I want to return one possible score value for each question for tabulating the data. I don't want to leave the template visible because when I distribute this form to other graders, they may enter values into the template page without realizing it, and then when the spawn forms they will have wrong data already entered.
Here is the script that I have set as the button's Mouse Up script:
// Specify the name of the template
var template_name = "Form";
// Get a reference to the template
var t = getTemplate(template_name);
// Add a new page based on the template
if (t !== null) {
    t.spawn({
    nPage: numPages,      // Add the new page to end of document
    bOverlay: false,      // Create a new page, not an overlay
    bRename: true         // Rename the fields
} else {
   app.alert("The template named \'" + template_name + " does not exist in this document.", 1);
Thanks for your help

Hi again GKaiseril,
If you have the time, would you be able to tell me how to do that? I tried just changing the page number of the template page to zero, but I get the error "Please enter a starting value of at least 1." I definitely noticed that all of the discussions about similar subject do all say to somehow put the first page of the form before the template and then hide the template, but I don't think that I know how to do that. I read your response on this discussion "Re: Self replicating form pages in Acrobat Pro 9 (Win XP)" before I ever started this discussion, but have to admit that I can't figure out how to follow your advice "When I create a from that uses a template, I create the template and then spawn the 1st page of the form before the template and then work out the scripting for the 1st page and template and then hide the template."
Thanks

Flash button not showing on page

just new to flash cs3, but have been using dream weaver cs3
for a while now, I am trying to add a flash button to a page its
showing up when i preview it on my own computer, I uploaded all the
files to root folder just cant under stand whats wrong, the site is
http://www.poxh.com in case any one
needs to see code, any help on this would be great
Thanks

David,
I don't know what that file is. Can you elaborate?
Thanks,
Chris
quote:
Originally posted by:
Newsgroup User
chriscatalano wrote:
> Hopefully this is a simple problem. I've added a Flash
Button via the Insert
> Media -> Flash Button in DW8. Unfortunately the
button does not show up when
> the php page is loaded up to the server. And yes, I did
make sure to upload
> the button file.
But did you upload this file?
Scripts/AC_RunActiveContent.js
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

Navigation Panel Pages button not displaying thumbnail pages

Version of Acrobat = Standard 8.0.0
OS = Win XP SP2
Networked Dell Optiplex 620
61.6GB Free disk space
No error messages
The Navigation Panel Pages button will not display pages in thumbnail format.
When clicked the highlight around the button icon changes from a square with rounded corners, to just rounded corners on the left of the highlight. The right hand side of the highlight is cut off straight as if by the thumbnail panel that isnt visible.
This behaviour is also repeated on the Bookmarks and Signatures buttons in the navigation Panel as well.
Fiddling around with all the navigation panel settings or the document settings I can find has not made the thumbnail pages reappear.
I havent been able to access the Updates section of the Adobe website today to apply any relevant updates.
Cheers.
Adam Crossingham
Systems Support Analyst
Heritage Managing Agency Limited

Just in case, I would go through the updates to get AA8.1.2 and check if that was a bug in 8.0.0.

P35 Platinum: I have to press the power button multiple times to start

Hello fellow MSI customers,
as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
What I tried:
1. Boot using only 1 piece of memory stick
2. Boot using only 1 piece of memory, but different one
3. Use another pair of memory <- worked, but on that day it also worked using my original memory
4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
5. Tried all of the above with a different processor
6. Used another power supply
Any other ideas?
Here are my specs:
MSI P35 platinum
Core2 Q6600
Nvidia 7900GT
4GB V-Data DDR2 800MHz <--- I think this is the problem, any experiences?
Enermax Liberty 400W
a few other things (HDDs, XFi, DVD-RW)
By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
Thank you for any help, muro
And just to let a bit of steam off:
1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?

Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro

PC does not start when pressing the power button, After that starts automatically like a ghost!

I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
Again when i shutdown and leave it for sometime, and still the problem is unsolved.
Please Help
This question was solved.
View Solution.

he figured out you dont just shut the lid and walk away, you use Windows shutdown
click Kudos to say thanks if I helped

My iphone4 today suddenly froze today I did a lot of tries by pressing the lock button(long press) and pressing home button and lock button together( long press) but it is not starting. It's 7.1.1 and iPhone 4

My iPhone4 suddenly froze today. I did a lto of tries to start it by pressing the lock button(long press) and by pressing the home and lock button together(long press)but it doesn't work. It's an iPhone4 iOS 7.1.1. How to restart it?

Hi there Arpit gaba,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
-Griff W.

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac

Report is not starting an adobe window when pressing the print button

When ever I press the print button on my report and I get the box that asks you which page to print. I choose all and then press the ok button. Nothing happens when I press the ok button. I'm I missing something on the server that is running the application. It works locally but not on my test server.
Thank you

Well, in order to print using PDF, you must have adobe installed...
I understand that you have some CR Service Pack installed, but I am not sure which one. I'd recommend you download SP 5 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
And use the msm to install the runtime. The SP 5 msm is here;
https://smpdl.sap-ag.de/~sapidp/012002523100001088442009E/crxir2sp5_net_mm.zip
Re.; I was wondering I am missing something from the server that converts the report to pdf and shows it in the adobe viewer.
Not that I am aware of.
If SP 5 does not help, a question for you; can you print any pdf document (non CR) from adobe on that server?
Ludek

Report-start only by pressing on go button, not by entering page

Similar Messages

Maybe you are looking for