Report summary

I have a requirement to provide a list of the failing tests in a report at the top of the report to limit the time required to identify the items which failed. The default behaviour only reports the first failing test.
The generated report contains over 600 results which when printed cover 22 pages. The sequence tests 20 identical items with the stimulus being set before the same measurement is taken on each item.
The report is already an enhanced xml report which I created by modifying the default horizontal style report from teststand 3.5.
Can anyone provide insight on how I can search all test results during the report generation process to obtain the failing tests. Each test in the report is identified by a unique number, the test number is what has to be listed.

Sma,
The critical failure stack for xml reports is populated in 'AddReportBody' sequence in ReportGen_xml.seq.
The step 'Call AddCriticalFailureStack' adds the critical failure stack elements to Parameters.UUT.CriticalFailureStack.
To modify the generated critical failure stack, you will need to do the following:
1. Either add a new method to modelsupport2.dll or your own library to add the required items to the critical failure stack
2. Modify 'AddReportBody' sequence in reportgen_xml.seq and to call the new method
3. Depending on the changes you have made to the stylehseet, you might have to also make changes to stylesheet to support the new elements.
Hope this helps
Regards
Anand Jain
National Instruments
Message Edited by Anand Jain on 06-16-2009 11:42 PM

Similar Messages

How to get the report summary to the bottom of the page?

Hi all. Does anyone know how can I get the report summary to
stick to the bottom of the page, like the page footer? Basically, I
have a report that displays line items on an order. At the end of
the report, there is a signatory section or acknowledgment. If I
stick this in the page footer, then it displays at the bottom of
the page, but on every page. If I put it on the report footer, than
it follows immediately after the details, and not at the bottom of
the page. What I need is the report footer to be at the bottom of
the last page.
Any ideas?

Greetings. Thanks for the post. I am not having problems with
a page number. I am having problems with getting the report footer
contents to be at the bottom of the last page. The closest solution
I have found is to put the content in the page footer, and then
hide the page footer until the last page. However, this leaves
whitespace on all of the other pages, which isn't ideal. I really
need an attribute that allows me to set the report footer to print
at the bottom of the page, like the page footer.

Report summary - itunes U site manager

I cannot see the report summary for our site. I have tried different types of browsers without luck.
I could se the summary two weeks ago?
Niels

Hi patixa,
this seems since the last maintenance - still no showing. Do you know of an easy way to contact the relevant Support?
Thanks,
-Darudh

Report Summary in Awr Report

Hi,
I have doubts in Report Summary scection in AWR report.Please anyone clear it.
1,What is W/A MB processed?
2,What is the difference between logons in load profile section and Sessions in snap info section?
Logons means connection which may one or more sessions.Is it right?
3,What is the difference between Block changes and Physcical writes in load profile section?
a,,Block changes means only datafile? or including Undo/Temp?
b,Physical writes:Number of physical writes performed.What does mean?
For Ex:
1,Emp table has 5000 rows on 50 blocks.
2,Insert into emp select * from emp;Then commit;
50 blocks changed Hence the value 50 added to Block changes.Is it right?
What about Physical writes?How the writes value calculated.Just assume 100 writes performed for this insert statment.
How is the value(100) cacluated?What basis?Is there any parameter influenced?like db_block_size .....If it's what are the parameters?
4,Execute to Parse %: Parse once execute many.
Softparse %:
Buffer Nowait %: 99.97 Redo NoWait %: 100.00
Buffer Hit %: 99.93 In-memory Sort %: 100.00
Library Hit %: 103.53 Soft Parse %: 94.67
Execute to Parse %: 100.00 Latch Hit %: 94.42
Parse CPU to Parse Elapsd %: 12.94 % Non-Parse CPU: 99.81
a,Soft Parse %: 94.67.So Remaining 5.23% is hard parse?
b,If Execute to Parse % is 70,What does mean of remaning 30%?(Same statement but differ in various reason like authentication or optimizer)Is it right?
c,How to relate Execute to Parse %: with Soft Parse %:?
d,How to relate Parse CPU to Parse Elapsd %: with % Non-Parse CPU:?
5,Shared Pool Statistics
Begin End
Memory Usage %: 26.26 25.90
% SQL with executions>1: 98.95 98.31
% Memory for SQL w/exec>1: 97.79 99.46
a,What does mean of Memory usage?26.26% memory used in allocated total SGA(if configured sga_target or memory_target).Is it right?
b,at does mean SQL with executions>1?How to/Where to realet with other parameter in AWR?
c,at does mean % Memory for SQL w/exec>1?How to/Where to realet with other parameter in AWR?
6,What does mean of Per exec, per call in load profile section for the attribute DB Time(s),DB CPU(s)?
7,What is Load average begin/end in host cpu section?How is the value calcuated?
8,What is %wio in in host cpu section?
9,What does mean %total cpu and %busy cpu in instance cpu?
10,what does mean Applied urec?
Br,
Raj

Hi,
Thanks for your Reply..........
Now we use 11g only,Not 12c.
I read oracle 11g document already(few times).But i couldn't understand it.Hence,i posted here.
If anyone tell,it is a BIG release from headache.
Br,
Raj

Sub-report summary fields

I have two sub-reports on a report. Each of these sub-reports have a quantity summary on them. I want to find the difference between these two summary totals.
So let's say Sub(A) total is 200 and Sub(B) total is 25, is there a way to subtract the 25 from the 200 and bring that total to the main report?

HI SD,
1.you have share the value to main report from both sub report by using formula .
2.Sub Report Formula
For A Sub Report
shared numberVar Aqty;
Aqty := Sum ({Command.Qty})
For B Sub Report
shared numberVar Bqty;
Bqty := Sum ({Command.Qty})
3.Main Report Formula
Aqty
shared numberVar Aqty;
B Qty
shared numberVar Bqty;
4.you can create final formula for different Aqty-Bqty
5.you should put formula in both sub report and you should place the main report formula in below of sub report then only it will work. -Rajesh N

AR aging report (summary by customer)

Hi Experts,
I would like to ask if how to create an aging report showing only the:
1. Customer
2. Credit Limit
3. Payment Term
4. Total AR
5. Due 0-30
6. Due 31-60
7. Due 61-90
8. Not Due
Hopefully the balance should be the same as with FBL5N. We have around 100 customers and we would like to see in one file only the summary per customer not not really the line items. Thanks.
I have consumed a lot of time searching for the answers in the forum but I cannot clearly figure out how to proceed. Which tcode do I configure this? Thanks in advance

If standard report does not suffice your requirement, then create your own.
FOR vendor USE K in transaction code instead of D.
Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Custom Report Summary Criteria

I am trying to create a report that lists software where there are more
installations than licences. I want to add the following to the summary
criteria however the "over/under" summary column does not appear in the
summary criteria field list.
Summary Criteria
Summary field Operator Value
Over/Under < 0

Clive,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Expense Report Summary page does not show any totals - only zeros

Hi All,
On creation of Expense Report in the portal When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
we are surprised that any custom development is hitting or anything relates with configuration
Provide valuable inputs to proceed further
Regards
Jaipal

Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio

Report Summary table

Hi
I am tasked with producing an automated version of a manual summary table that is built in Excel.
The data is derived from a single reporting table.
My problem is going about how to design such a table. Please see the image attached to get an idea of what i'm after.
It's like I'm after a double grouping of data - one for the rows and one for the columns, but I don't know how to implement one.
Should I just insert a row for each summation into the table that first begins with the row title? eg
VALUES ROWTITLE, SummedInfo2012, SummedInfo2013 etc....
Or is there another way about this?
Thanks.

Well, keep guessing
select type, value
from (select
sum(cast(fault as int)) as
fault ,
sum(cast(nonfault as int)) as
nonfault ,
sum(cast(dispute as int)) as
dispute
from t1) as agg
unpivot(value for type in([fault ], [nonfault ],
[dispute ])) as u;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Report Summary Display

Hi ,
I want to display only Total in Query , how to do it please someone tell me
Version BW3.1
Example :
12 34 test   test    test   20   35
10 34 test    test   test   10    2
25 10 test    test   test2 20   5
47 74 -         -        -       50    42 (I want to display only this row , how can we hide or do we have any option to display only summary values)
Thanks,
GAL

Hi Gal,
When you see the output of your Bex report , you can see that the detail of the report is due to certain objects.
Ex: plant , material, date and total inventory. the detail level of the report is due to the date. so if you just hide the date , automatically you get the summary.
try to identify those fields and hide them.
Edited by: satish murthy on Apr 12, 2010 11:17 AM

Unreconciled Transactions report - Summary section

Hi,
When our controller runs the Unreconciled Transactions report after doing a (external) bank reconciliation, there is a summary section after the list of the unreconciled transactions with the following:
     Total Debit in Books / Bank
     Total Credit in Books / Bank
     Total Open in Books / Bank
For some reason this doesn't always print on the report. We are using the default template (i.e. no customization). Is there a setting or something in the reconciliation that determines whether this summary section is included on the printout? I can see it in PLD/edit layout but don't see anything that would indicate why it doesn't always print.
On SBO2007A SP01 PL07.
Thank you,
Heather

Hi Gordon,
WeI haven't been able to determine a pattern yet. The controller is going to have me sit with them next time they process a reconciliation but in meantime thought I'd see if there was something we were missing.
The only pattern is that out of the 3 companies/databases, it is only with one that we are seeing this happen. Is there anything in the localization? We have both Cdn & US localization.
Thank you,
Heather

Help with report summary

I'm a bit of a newbie so please bear with me.
I have a report that lists the contents of a truck by pallet and weight - 100# of A, 200# of B, another 100# of A, etc.
I need to add a summary of how much of each stock# was on the truck.
If anyone could point me in the right direction I would appreciate it greatly!
Thanks in advance
Cyber-guys

group by truck, group by pallet, then use the summary functions to get your totals. If that is not what you want, please provide some sample data, with a sample of the desired results.

Report (summary) to print in the same order as the PAYCHECK run.

Hi,
I have a requirement where an incentive pay summary by salesperson, will need to print in the same order as the checks that print for those salespersons.
Is this possible and if so, what is required to accomplish the above requirement?
Thank You,
John

You can't change them once they are in the Photos app. On iOS 5 the photos will be sorted by the photo's 'date modified' field (from here) - so you will need to modify that field on your photos before syncing to get them into your required order. Or you could consider using a third-party photo management app instead of the Photos app e.g. Photo Manager Pro which allows you to re-order photos directly within the app.

REP-2103 error in report summary column

Hi ,
I am getting the below error while running the report
REP-2103 Column 'CS_Achived_tot' : PL/SQL formula returned invalid value or no value
Could you please help me ...
Thanks in Advance
Regards,
Sandeep

Hi,
I have used the below code in the formula column
function CF_Achived_totFormula return Number is
v_achived_tot number;
begin
begin
select nvl(:attribute4,0)
into v_achived_tot
from dual;
exception when others
     then
     --v_achived_tot :=0;
     srw.message(130,'CF_Achived_tot');
     return null;
end;
return (v_achived_tot);
end;
no data was there in the attribute4 feild and it was varchar2 data type
Regards,
sandeep

Financial Reports-Summary based on external code

Hi,
Is it possible to select different accounts from different drawer to show the summarized report.
Scenario. in the Chart of Accounts we define different account number and name.The account may be title or active account.If i define an external code which can be duplicated for different accounts in multiple drawers,can i see a report which can group accounts based on these external codes.
I think it can be done with financial report template but if i choose B/S template i can't group profit/loss account similarly P/L template i can't chose
Please suggest the solution
Thanks and Regards
md.nazeer shaikh

Thanks Gordon,
but is it possible in XL reporter to take the accounts from different drawer like in Indian locality 5 drawers are available.from all the five drawer can i pick the accounts or just 3 drawers in case of BS and two drawers in case of PL
regards
md.nazeer shaikh

CUIS / CUIC Custom Reporting Summary

I am using Cisco CUIS versiopn 7.5.(4)
I have been able to successfully add a new reporting field in CUIS using the formula editor. Here is the formula:
[RowField]/Sum([RowField]) Gives me a percent of the total of the entire report.
This report uses 3 grouping levels...
Does anyone know how we can change the formula to return the percent for a specific group. For example, [RowField]/Sum([Group3].[RowField]) ....

Hello, Steven.
I'm sorry to see you were not able to find the information or assistance you were looking for here in the Contact Center community forum.
You may be able to find more help through the Cisco Developer Network.
Also, you might want to consider engaging Cisco Advanced Services via your account team to assist with UCCE/CUIC custom reporting.
Thank you, and good luck.
-Paulo

Report summary

Similar Messages

Maybe you are looking for