Report Timeout

Dear All,
I have made a report that fetches data from table BSEG, BKPF, etc.
Thus it timeouts. Is there any way I can upgrade my code for getting the O/P earlier ??
Please help.

Hi
Sugestions (maybe already you doing so...)
1) You can improve performance by using in where clause same order as in the tables.
2) By fetching all data to itabs and working with itabs (iternal tables).
3) To minimize data to work with by exact keys and fetching only needed fields.
also you can just make background run...
Regards
Yossi

Similar Messages

Reporting Services Report Timeout

hi Getting Time Out error on Production server..... same report working fine on UAT.
I Individually executed query on both UAT and production taking same time.
I have checked all the option in the given link...please tell me any another solution if you have
https://stackoverflow.com/questions/840629/reporting-services-report-timeout/3505765#3505765?newreg=f7ac9bb2b2ff4924a0fc2ffc6b52ff17

Hi VMuradiya,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Xl Reporter Timeout Setting

Hi All
We have the following message when trying to generate a large report in XL Reporter.
An error occurred while Executing report!
Decription: Rows 2358, Column 244
Timeout expired
This is a very large report and it times out before it completes. This message comes up after approximately 20 minutes of running.
Please can anyone advise asap if they are aware of a timeout setting that can be extended in XL Reporter.
Alternatively is there a fixed limitation in the number of rows or the time a report is allowed to run?
Kind regards
Sam Burchell

Hi Sam Burchell,
When XLR builts report, it need both disk space and memories. For such large report, I doubt you have anyway to run. You need to redesign the report or add parameter to restrict the data range.
For a report with over 200 columns, how would user read it?
You can calculate by yourself: 2358 X 244 (cells) is probably the limit for this specific environment
Thanks,
Gordon

Report Timeout in Portal

Hi Friends,
We have a query which runs for 5mins when we execute from Bex Analyser using Execute query on the Web, but the report times when we execute from Portal after 10mins. Any idea where the timeout settings can be changed.????
Thanks in advance.
rCm.

Hi rCm,
You can increase the time out time for ICM. This will extend the time out time for the queries on portal. ICM is internet communication manager.
You can check that in t-code RZ11 giving the param name: icm/conn_timeout
Hope this helps you..!
-Pradnya

Reports timeout at 60-seconds in web page

I have an SSRS 2012 report that takes a couple minutes to run. It runs fine in Visual Studio, and when run directly from the report-server manager (webpage), but when run from an ASP.NET webpage, it "stops running" at 60-seconds. No errors - just
the "please wait" message disappears and there are no results, although the report toolbar is still visible and operable. You can click the refresh button on the report toolbar and it "runs" again, but still stops at 60-seconds and
nothing in the results.
I don't believe the problem is at the report server, since the report runs fine there. I think it is somewhere in the web server that's accessing the report server, but I just can't find anywhere there might be an exact 60-second timeout. The web server
is pretty-much vanilla, with it's default settings.
Does anyone know what timeout might be defaulting at 60-seconds and causing the report to just stop?
Thanks in advance.
DanielCraig

Hi Daniel - Are you using ReportViewer control? If so, please check this out - http://social.msdn.microsoft.com/Forums/en-US/58a4367a-b48c-4db7-9293-5e1123f9440a/report-viewer-2010-long-running-reports-time-out?forum=sqlreportingservices
Shahfaisal Muhammed http://shahfaisalmuhammed.blogspot.com

Business Objects XI report timeout

Hi All,
I'm running a quite simple environment:
Windows 2003 R2 SP2
IIS 6
Oracle Database (remote on Linux but same subnet)
Business Objects Server XI R1 SP3.
I'm having an issue with reports getting time out errors after 2 minutes before they have had a chance to complete.
What I want to do is increase the setting that lets the report run before it errors. I can monitor my database and still see SQL being passed when the 2 minute limit is reached.
I have changed the 'Default Website Properties' Connection Timeout setting in IIS to 500 seconds and restarted, this has not helped the problem. I have looked through all the settings under Servers in the CMC, I can't see the right one. I'm not asking for the connecting setting before I need to log back in, I need the setting that will let a report run for 10 minutes before it errors.
If I run a problem report via Schedule, it completes but is very close to 2 minutes. If I run it On Demand, it times out after 2 minutes, but I can still see the query selecting data then gets terminated.
Thanks in advance, Jason.
Edited by: Glenn Rieger on Oct 20, 2008 2:52 AM
Edited by: Glenn Rieger on Oct 20, 2008 2:55 AM

I had the same problem on a 12 mo cost report that produced 95,000 records and read close to 400,000. Could only run 4 months.
Changed the "Database Records Read When Previewing or Refreshing" parameter to 0 (unlimited) in CrystalReportsProcessingServer
and changed the "Maximum Cache Size (KB)" parameter in CrystalReportsCacheServer from 250,000 to 500,000 - then it would run.
Sorry, wrong thread I think - I was getting "max processing time or max records limit reached" error message but I think my problem was max records rather than timeouts.
Edited by: Richard Carlson on Dec 22, 2008 9:03 AM

Reports Timeout Error

I'm executing a report and I'm getting the following error, can anyone help me ?
500 Internal Server Error
org.omg.CORBA.OBJ_ADAPTER: The delegate has not been set! minor code: 0
completed: No at com.inprise.vbroker.poa.BOAImpl.deactivate_obj
(BOAImpl.java:446) at oracle.reports.server.ConnectionManager.release
(Unknown Source) at oracle.reports.server.ConnectionImpl.disconnect
(Unknown Source) at
oracle.reports.client.ReportRunner.releaseConnection(Unknown Source)
at oracle.reports.rwclient.RWClient.runReport(Unknown Source)
at oracle.reports.rwclient.RWClient.processRequest(Unknown Source)
at oracle.reports.rwclient.RWClient.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind[Oracle9iAS (9.0.2.2) Containers for
J2EE].server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:66) at
oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind[Oracle9iAS (9.0.2.2) Containers for
J2EE].server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:539) at com.evermind[Oracle9iAS
(9.0.2.2) Containers for
J2EE].server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:285) at com.evermind[Oracle9iAS
(9.0.2.2) Containers for
J2EE].server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:771) at com.evermind[Oracle9iAS (9.0.2.2)
Containers for J2EE].server.http.AJPRequestHandler.run
(AJPRequestHandler.java:152) at com.evermind[Oracle9iAS (9.0.2.2)
Containers for J2EE].server.http.AJPRequestHandler.run
(AJPRequestHandler.java:72) at
EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run
(PooledExecutor.java:796) at java.lang.Thread.run(Thread.java:484)
When I see the job status at EM it says that a timeout error occurs.
Best regards.

Hi,
This error was reported in Bug 2686291, but it was not confirmed, so it was closed as not a bug. The error was:
org.omg.CORBA.OBJ_ADAPTER: The delegate has not been set! minor code: 0
completed: No at
com.inprise.vbroker.poa.BOAImpl.deactivate_obj(BOAImpl.java:446)
Initially it used to occur when a jsp include statement was used, like
<jsp:include page="EMPLOYEE.JSP" flush="true"/>
But as I said, this bug was not reproduced. Here, I can only advise you to try applying the latest reports patchset (9.0.2.3) - patch number 3129219 - from Metalink.
A very similar error has been reported if you use Oracle9iAS 9.0.2 with IBM JDK 1.3.1 SR4. See Note 251343.1 on Metalink on how to resolve the problem. Just to quote from the note,
========================================================================================
Oracle Report Server 9.0.2.0.1 & onwards
Operating System - IBM AIX
Symptom(s)
~~~~~~~~~~
When starting report server, you are getting the error
REP-50125: org.omg.CORBA.OBJ_ADAPTER: org.omg.CORBA.BAD_INV_ORDER: The Servant has not been associated with an ORBinstance minor code: 0 completed: No minor code: 0 completed: No
Change(s)
~~~~~~~~~~
Recently applied the Java 1.3.1 SR4 (ca131-20030329).
or
Check that you are not using above java version
java -fullversion will show the full java version
Cause
~~~~~~~
It seems that IBM JDK 1.3.1 SR4 switched to new CORBA standard (which is part of Sun's JDK 1.4).
Fix
~~~~
1.Ensure that you had applied the Java 1.3.1 SR5a or higher (ca131-20030630a, IY47055)
2.Set the fowlloing in environment before starting the report server export IBM_JAVA_OPTION=-Dcom.ibm.CORBA.POACompatibilityMode=true
============================================================================================
Also see Note 258012.1 for AIX based systems, and Note 245985.1
http://metalink.oracle.com
Navneet.

Web Report timeout

hi experts,
is it possible to set a timeout for web reports if it is idle for a given number of minutes? (ie. user has left the report/bex open and is not using it). our goal is to automatically close these unused sessions so we can get back some memory for the system to utilize.
regards
mark

Hi Mark,
Go to SMICM transaction code and goto -> parameters -> Display.
check for the below parameters :
Timeout handling
icm/keep_alive_timeout (sec.) = 600 -
>>>> Here u can set the time for the session alive
icm/conn_timeout (msec.)       = 5000
icm/max_timeout_net (msec.)    = 2000
icm/min_timeout_mpi (msec.)    = 5000
After 600 s = 10 min time if user try to do any operation the page will be expired, again he need to open the report.
Regards,
Vara Prasad

Javamail API not reporting timeout

Hi,
I'm writing a POP3 application which pulls mails
from a mail server processes them and then deletes
them from the server.
Occasionally the processing takes a while and the connection
with the mailserver may timeout. This is fine because if I know
its timed out, I could reconnect and find the mail and delete it.
However what is happening is that the connection is timing out but the javamail api gives me no indication of this. The folder and store objects both report that they are open. Even if I use a connectionListener it tells me nothing.
Now even this might not be a problem if the next oeration where to fail, as the same thing occurs in the transport object, however when I attempt to send it fails and closes the transport.
However with the store I mark a message as deleted and then close, and it gives no exceptions letting me think I have successfully deleted a message, whereas in reality the underlying socket connection was closed and the message is still on the server.
I have tried this several times looking at both the debug output on the mail server and from the javamail api.
Is this a bug I should report or is there something I'm missing
It seems pretty bad that javamail allows me to delete a message on a connection that is closed and not throw an exception.
All ideas/suggestions welcome?
Failing this does anyone know how to get the javamail api to send a NOOP
command to keep the connection open.
-vinnie

I have been setting my timeouts manually.
Properties props = System.getProperties();
props.put("mail.imap.timeout",timeoutVal);
props.put("mail.imap.connectiontimeout",timeoutVal);
Session session = Session.getInstance(props,null);
mail.pop3.timeout and mail.pop3.connectiontimeout are what you would want to use. Something else you might want to try is doing a Folder.getMessageCount() or some other low overhead transaction to keep the connection alive.

NFR 2.0 view reports timeout

I have NFR 2.0 running on a windows 2008 R2 server with 2CPU and 12GB ram.
On this I've been trying to run some reports, though it seems as if larger reports fail. The report will generate, I can see it has been generated and created a file under "C\inetpub\srs_root\App_Data\Reports". The problem comes when I attempt to view it, when trying to view it I get a new window that opens, then just hangs for a few min, and eventually ends with:
Error
An unexpected error was encountered.
Please retry the operation, and if the error persists, contact the system administrator.
Error Message:
Request timed out.
the report I'm trying to pull appears to be about 73MB, there is a 77k one that opens with no issue. Is there a size limitation with nfr 2?

On 5/9/2013 4:46 PM, rbgnr111 wrote:
>
> I have NFR 2.0 running on a windows 2008 R2 server with 2CPU and 12GB
> ram.
> On this I've been trying to run some reports, though it seems as if
> larger reports fail. The report will generate, I can see it has been
> generated and created a file under
> "C\inetpub\srs_root\App_Data\Reports". The problem comes when I attempt
> to view it, when trying to view it I get a new window that opens, then
> just hangs for a few min, and eventually ends with:
>
> Error
>
> An unexpected error was encountered.
>
> Please retry the operation, and if the error persists, contact the
> system administrator.
>
>
> Error Message:
> Request timed out.
>
>
>
>
> the report I'm trying to pull appears to be about 73MB, there is a 77k
> one that opens with no issue. Is there a size limitation with nfr 2?
>
>
rbgnr111,
There's no report size limitation with NFR 2.0. However, as a result of
testing (both internal and external) we've added some extra indexes and
improvements to the report generation process that help speed certain
reports up considerably.
If you don't mind, please send an email to [email protected] --
we'd like to send you some new code, if you're willing to try it. At the
very least, we'd like to investigate your scenario in a bit more detail,
to see what might be happening. Thanks very much!
- NFMS Support Team

Report timeout parameter

Hi,
I set FORMS_TIMEOUT=5 in the default.env file and it worked fine. When abnormal form closure happens then the entry from v$session gets clear in 5 mins. But report's entry in v$session doesn't get clear if i run a report from the forms and abnormal report closure happens. Is there any parameter needs to be set like we have a FORMS_TIMEOUT? if yes then where should i set that? I would appreciate for your help.
Thank you
Message was edited by:
user577893

Have you asked this question in the Reports forum?
Reports takes care of its own failure handling. Forms and Reports are closely coupled but not so much that Forms knows if Reports has crashed.

Reporting Services Timeout but Query keep running?

The Gobal value for the reporting timeout is 10 minutes (600).
I Have a report which takes around (1hr to run).. The report correctly timesout (page cannot be display)
but the query kept on running..until it completed.
Is there any way to stop this from happening (Report and Query timeout after 10 minutes)
I have look on the internet and in my rsreportserver.config ..
<Add Key="SQLCommandTimeoutSeconds" Value="60"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
.. This information seems to be ingnored

if you run thr query (which generates this report) in SSMS , does it complete fast?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Timeout for content

Hello
9iAS with Portal 9.0.2 in Sun Solaris
I am working with Oracle Reports Builder and Oracle Portal.
I've saved my reports with JSP extension.
So, I've made some portlets with these reports into PEOPLE_APP db provider.
Now, when I run my pages with these portlets, some times (most of times) the following error appears instead of the report:
Timeout for content=[any_number]
I've already researched in OTN and Metalink forums, I've changed my zone.properties and http.conf files, but it didn't resolve my problem.
So, what else I need to do in order to solve my problem? Any other ideas?
Thanks.
P.S: We've sent lots of questions with no satisfactory response from Oracle.
We've noticed that Oracle provided extremely poor support.
Maybe this isn't a good solution. Maybe there isn't a solution, at least in this way.
Take a look in some fragments of messages, found in OTN and Metalink forums:
"I've increased the timeout but that doesn't help.
It's also very strange that after rebooting the server in Portal 3.0.8/ias1.0.2.1 my pages appeared in 10-20 seconds and now in Portal 3.0.9/ias1.0.2.2 it takes two to four minutes. And this slow performance is only while retrieving the page for the first time. The second time I retrieve a page it's there in a few seconds.
So, I do not think it has anything to do with the provider's timeout...."
"But maybe it's the Portal-schema itself which causes this problem. I heard someone saying that he missed indexes after a Portal-upgrade --> maybe this is my problem too, although i didn't have any error-messages in the upgrade-logfiles...."
"Unfortunately we did not yet solve these timeout problems. Oracle is currently studying several logfiles and traces.
At first we thought that we had the timeout problems only after starting up the server. But now we noticed that the timeouts are repeated after 5 to 7 days. For some reason it looks as if Portal is refreshing the cache at that moment, but we can not find anywhere a refreshperiod of 120 hours or so..."
"Having wrestled with these Timeout errors for months with no satisfactory response from Oracle, I came across someone's solution yesterday and, for me, it worked immediately. Please keep in mind before doing this that it is in direct opposition to what the new "Troubleshooting Issues in Oracle9iAS Portal Architecture and Performance (3.0.9.8.2)" whitepaper states....."
"After many many performance problems and timeouts issues which Oracle provided extremely poor support we finally learned that all of our problems where related to the same things - Oracle has not tuned this product before shipping it. Numerous little bugs and coding errors were a small part of the fixes. The real problem is that all the indexes have subscriber id as the first column which is always set to one and is not used in the majority of querys which makes these indexes useless for performance... (http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)"
"Sr. Oracle how long do I need to wait for real solutions? (http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)"

You must have registered some provider for your portlets. Go to adminstration screens of portal. Goto edit provider from there and increase the portlet timeout.
Also change the time out value in your provider.xml for the corresponding JSPs.

Getting app-store-import-exception with FIM-MA Full Imports SQL Timeouts

Hi,
Any idea whats going on here? Full Import on FIM-MA leads to app-store-import-exception.
Here is a quick profile of the situation:
FIM Sync, FIM Service & FIM Portal all are instaled on the same machine with 24GB RAM hosted as a Virtual Machine.
FIM-MA Full Import leads to app-store-import-exception
Event log reports "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding"
Here is a screen shot: http://www.freeimagehosting.net/image.php?e5570db7f6.jpg
As you can see, FIM-MA imported close to 118500 objects before timing out.
Here are the things I have tried:
Extended FIM timeout on the services as per
Darryl's Blog
Provided FIM MA's password as per
Ahmed's suggestion
Restricted SQL Service Max RAM to 15 GB (Machine has 24GB) as per
David Lundell's suggestion
Thanks for your help in advance.
Thanks,
Here is the Application Event Log
Log Name: Application
Source: FIMSynchronizationService
Date: 1/6/2011 11:29:00 AM
Event ID: 6500
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: fimsrv.fimdev.pvt
Description:
The description for Event ID 6500 from source FIMSynchronizationService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
There is an error executing ILM MA full import.
Type: System.Data.SqlClient.SqlException
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Stack Trace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.ResourceManagement.Data.Sync.FullImportGetNext(Int64 beginObjectKey, Int64 maxObjectKey, Int32 batchSize)
at MIIS.ManagementAgent.RavenMA.FullImportGetNextBatch(Int64 maxObjectKey, Int32 batchSize)
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="FIMSynchronizationService" />
<EventID Qualifiers="0">6500</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-01-06T17:29:00.000000000Z" />
<EventRecordID>1582399</EventRecordID>
<Channel>Application</Channel>
<Computer>fimsrv.fimdev.pvt</Computer>
<Security />
</System>
<EventData>
<Data>There is an error executing ILM MA full import.
Type: System.Data.SqlClient.SqlException
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Stack Trace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.ResourceManagement.Data.Sync.FullImportGetNext(Int64 beginObjectKey, Int64 maxObjectKey, Int32 batchSize)
at MIIS.ManagementAgent.RavenMA.FullImportGetNextBatch(Int64 maxObjectKey, Int32 batchSize)</Data>
</EventData>
</Event>
Thanks,
Jameel Syed |
Identity & Security Strategist | [email protected] |
Simplified Identity and Access Management

That is unusual. I suggest checking for database integrity and peforming index maintenance, on both the FIMService and FIMSync databases.
You could also increase the following timeout (see link below for more settings)
The values in Table 17 are located in the registry key: SOFTWARE\Microsoft\Forefront Identity Manager\2010\Synchronization Service.
Table 17
Registry value name
Value type
Class
Created by
Notes
ReadTimeOut
<dword>
HKLM
Admin
The default value is 58, specified in seconds.
Note
Only used by the management agent for FIM (FIM MA) for reading from the FIM Service data base.
http://technet.microsoft.com/en-us/library/ff800821(WS.10).aspx
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Report Timeout

Similar Messages

Maybe you are looking for