Report with all monitors & their threshold for a server for SCOM 2007 R2

Hi,
I need a report with all monitored monitors & rules with their effective threshold for SCOM 2007 R2. I tried few scripts & tools mentioned on different blogs, but not getting anything.
Any help in this regard would be highly appreciated.
TIA

This would be a custom report, which is not available to my knowledge. You need to consider overrides, and this is the crux of the situation. What you can do is open the pack in MPViewer, and export the pack which will contain the thresholds. And you could
also create an override view, in My Workspace, based on the pack you are interested in.
Otherwise, it will be a custom TSQL query or stored procedure, that you may incorporate into your custom report.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Similar Messages

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

CallManager Report with all Extensions and CSS

I would like to run a report that shows all of my Extensions configured in CallManager and the CSS they belong to. I have yet to find a spot to have that data together. I am working on CallManager8.6 Thank you!

People that don't move much for their jobs have a set phone with a set extension. People who move around a lot have phones with base extensions, and then they log in using extension mobility. We use the CSS to allow them access to outside calling. If they're in a restricted CSS they can't make outside calls. What I'm trying to do is run a report with all of the extensions, the ones on the phones and the ones for extension mobility, and the CSS that those extensions are tied to.

Access Web Database - Select record and make report with all associated records

Hey everyone,
Right now I'm in the middle of trying to convert an Access client database to be web compatible and I'm running into some problems. For this question, I think I may need to explain a little bit about the database:
The database I'm making is designed to store information about music rights for different songs. The users can input information about writers, producers, organizations, properties, businesses - which is stored all in different related tables. Then, when a
user inputs a song, they choose which writers, produces, organizations, etc. are affiliated with that song.
What I'm trying to do is make a report where you can choose a writer from the list of all the writers and then produce a report with all of the songs by that writer.
I was able to do this in the Access client by making a report that, when opened would trigger (using the On Open event) a form to open where you would choose a writer from a combo box and then click a button. When the button was clicked, it would use the value
in the combo box in a query, which would find all of the songs by that writer and then open up the report which would have the writer and all of their songs on it.
Because web reports don't have many event options and web queries are very limited, I have not found a way to make this report.
Any help at all would be greatly appreciated!

Hi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/web-database-select-record-and-make-report-with/04ce4e25-a964-4146-9a34-f9cb26bb0496
Regards,
George Zhao
TechNet Community Support

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

Enable Custom Authentication for License Server for Packager Server

How to enable processing of Custom Authentication for License Server for Packager Server?
Please give examples.

If I understand your question, you want to use the Flash Access Manager and/or the Watched Folder Packager (both are components of the Reference Implementation) to package content for a license server that uses Custom Authentication. To accomplish this, you need to use the Flash Access SDK to create a policy that specifies Custom Authentication is used. For example:
Policy pol = new Policy(false);
LicenseServerInfo licServer = new LicenseServerInfo(AuthenticationType.Custom);
pol.setLicenseServerInfo(licServer);
// set rights and other policy attributes
Once you create the policy, place the policy file on the Packager Server, and you can use this policy to package content.

Sharepoint Audit report with all items under Data and items selected

Hi all,
We have to use following settings under SharePoint
Configure audit settings.
Configure audit settings => Data and Items => specify events to audit.
Under specify events to audit. Select all the available options.
Could you please answer my following questions?
What are the recommended guidelines from Microsoft to use audit reporting for collaboration site specifically. More in terms of which settings to be enables for logging considering disk
space usage.
If we want to select all options under document and items section for auditing what are the recommendations from Microsoft to implement it. Mire in terms of infrastructure enhancements
to accommodate the additional log space requirements.

It's always very relative how much space to reserve for audit logs on SharePoint. It depends on so much factors... Only you can decide what is the best practice for your environment.
A sharepoint farm should be well maintained as per :
1. Microsoft's recommendations on : Topology, Hardware and Software requirements, Operational procedures and most important Capacity guidelines:
http://technet.microsoft.com/en-us/library/ff758645(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
2. Organisation's IT policies and procedures : Farm Configuration, Workload and monitoring
http://technet.microsoft.com/en-us/library/ff758658(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ee748651(v=office.15).aspx
Also it might be useful to check SharePoint Auditing Quick Reference Guide
--- Jeff (Netwrix)

Report with all Data Targets in Production and Record Count

Hi,
I am planning to create new report to handle some production maintenance work.
How do I create a report with list of each ODS and Cube and count of Active record count? Can I use any report in BW statistics and modify based on my requirements?
And also "Last Activation Date" is required.
Any suggestions? Please do let me know.
Thanks
Anand.

Hi,
The load might be taking too mucjh time as the system is busy.
wait for some time (30 mins) and see if the load goes thru
The load might have strucked up.
Change the request to red and reload data.
after doing initwith out data load, Run Delta.
Cheers,
Srinath.

Creation of transport rule to send all external mails through a particular server for a specific user..

HI,
In our Organisation We have a question, is there any possibility to create a transport rule for sending all external mails through a particular server by a specific user.
in our organisation we have exchange 2007 one mailbox server and two hub transport servers...and we are using symantic gate way..

Hi,
Based on my knowledge, we can use the following transport rule to make that except with one user, other users cannot send outbound external emails:
And I’m afraid that there is no Exchange feature to make one specific HUB server rout all external emails.
Because if a Send connector is configured to send messages to an external domain, any Hub Transport server in the organization will route a message for that domain to a source server for that connector to be relayed to the destination domain.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Best practice for licence server for RDS Farm & Certificate errors

Hello,
I am in the process of creating an RDS farm using Server 2008 R2. I have three Session Hosts and a Connection Broker.
I have a set of 10 user CALs available and also another 20 on our current RDS server which will need migrating once we go live with the farm.
I understand the User CALs need to be installed on another Server 2008 R2 and I am wondering what is best practice. We are running on an entirely virtual environment and it would be simple enough to create another server and install the CALs on there.
The only issue with that is that I would need to create a replica of this new machine for DR purposes, but this would take up valuable space which may not be necessary.
We are planning on creating replicas of one of the Session hosts and the broker for DR, so I am guessing I would need to install some CALs on the Session Host which is going to be replicated.
There are a few options and I am just wondering what is the best way to go about things.
Also, as an aside, I am getting an annoying certificate error each time I log a test user onto the RDS farm - I think this is because I am using the DNS alias of the RDS Farm to log on. Is there an easy way to get around this, other than the 'Do not show
this message again'. I have been doing some research and the world of Certificates is very confusing!!
Thanks,
Caroline
C.Rafferty

Hi Caroline,
Firstly for your License related issue, you can perform the step on any VM or can create the new VM as replica for RDSH server also. But please be sure that you have installed RD License server on it, activate it and then install RDS CAL on it. But be safe
if possible don’t install RD License server with RDCB, please make that out of it as little away. As you can also install RD License server with AD or make replica of that and install RDL on that.
Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
http://support.microsoft.com/kb/2473823
What’s the specified certificate error which you are receiving?
If you're going to allow users to connect externally and they will not be part of your domain, you would need to deploy certificates from a public CA. In meantime you can refer blog for getting insight for certificate case.
Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
http://blogs.technet.com/b/askperf/archive/2014/01/24/certificate-requirements-for-windows-2008-r2-and-windows-2012-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Reports with complex repeated expressions within groups - ideal candidate for variables but you can't aggregate them!?

Hi all,
Given this:
date
(rowgroup)
categories (colGroup)
Total (forCategories)
some Percent
Result
Result With%
Total of Result And Other Things here
cat1
cat2
cat3...
1st
[ val
val
val]
Sum(Value)
Max(%)
Tot*reportVar+3300
Result*1+Max(perc)
result + resultWith% (NOTE:this is total from last two cells)
2nd
3rd
Totals
Total
Total
total
total
rowGroup by date
colGroup by category
there are some "REPORT" variables that do things like "total" for a dataset that is to be shown on the report and used in some calcs...
So now that I've (hopefully) set the scene...
Aside from the apparent BUG in vs2012 where you can't see or get intellisense on "Group Level" variables - which is REALLY tough when you aren't that familiar with variables I must say!! - variables seem like they would solve my problem.
But if I use report variables in the row level I get the "cannot be used in aggregates" when I try to "Add Total" which is annoying but I'll accept that as a limitation, but surely this can't be the first time someone has wanted
to achieve the above in a report!!
So what is the solution, there must be one...
While I know SSRS is NOT Excel its really surprising and annoying when something so simple like summing the last two fields is nearly impossible and I can't see WHY it should be so frustrating that I have to have complex formula repeated in several
cells... particularly when I get the formula wrong and then have to remember to CHANGE it in several different places?!
Is SSRS simply not the right tool for reports where you need to be able to see and follow calculated series and I should be encouraging the business areas to extract data into Excel spreadsheets with some kind of template setup or am I missing something
really obvious about SSRS that would stop me from pulling all my hair out...?

Hi noJedi,
If I understand correctly, you want to sum total values of the last three columns. In this situation, we can use custom code to work around the issue. Please refer to the custom code below to work around the issue:
Public Shared Value as Decimal=0
   Public Shared Function GetValue(Item as Decimal) as Decimal
      Value= value + Item
      Return Item
   End Function
   Public Shared Function GetTotal()
      Return value
   End Function
Then use the expression below to calculate the multiplication result:
=Code.GetValue(Calculate Expression)
And use the following expression to calculate the sum value:
=Code.GetTotal()
Since you need to calculate three columns total values, we need modify the code repeat three times to get the values for each columns.
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/2084ef24-76d0-47c3-964a-340278d998c0/ssrs-2008-custom-code-to-properly-calculate-sums?forum=sqlreportingservices
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Cost centre report with all GL expense accounts

Hi Gurus;
Can you please give a cost centre report that gives all GL expense accounts with the correponding Cost centres or functional areas ni the next column?
Example:
Column A B C D
GL 12005 Cc 52001 Amount 100 function area 1000
That is without expanding the report gives you in total amount per requested period in the format shown.
The report should tally with Trial balance for all expense accounts.
Thanks
Lameck

Hi
Did you check the available reports in cost center accounting ?
Also check the report layout and check the desired fields.
Now you could see whether they match or not your requirement.
If not also, you could add fields from the options.
If nothing works, create a Z Report.
reg
suresh

Display Arrangement with 3 Monitors - Change Application from primary display for Mac

Hey guys,
I have 3 monitors with 1 of them being a Wacom Intuos.
Is there anyway to make certain applications load primarily on a different monitor than the one with the menu bar?
For instance when I load Photoshop I want that whole program to load on the Wacom. I can drag the workspace to that montior but the top Menu stays attached to the primary monitor. Any way to change that?
Thanks

Thanks so much for the quick reply!
I just right clicked on the photoshop icon and I don't see a option for displays.
What am I missing?

Reports with all functionality (sorting,total,subtotal,download)

Hi,
We require that all the actions which we can perform on the Reports available in SAP environment should also be available in the EP Platform.
Eg
sorting,total,subtotal,download.
Thanks.

Hi,
We require that all the actions which we can perform on the Reports available in SAP environment should also be available in the EP Platform.
Eg
sorting,total,subtotal,download.
Thanks.

Email subscription with ALL messages (including replies) is a horror (for me)

I really miss the functionality of getting only new messages/questions/treats in my email notification.
If I would like to follow a treat I want/can add it to my subscription.
Example: The LabVIEW board came up with 156 new messages with only 6 new treats in the top 50 of the list. I'm willing to answer questions and help, however I'm not willing to search the 12% new stuff.
Greetings from Germany
Henrik
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Hi Molly,
Looks like it works. THe selection is still available at the bottom (below Submit Post), but is not selected.
Thank You!!

Report with all monitors & their threshold for a server for SCOM 2007 R2

Similar Messages

Maybe you are looking for