Report with double aggregation

Hello
I need to produce the following reports :
Material Group Counter
MG1 12
MG2 30
The counter counts the numbers of materials of respective material group whose sales are higher than value entered by user.
The report should first be aggregated up to material level and then up to material group level.
Key figures with exceptional aggregation dont help. Calculation before aggregation isnt supported any longer in SAP BI 7.0.
Virtual key figure or cube based on FM?
Thanks

no answer

Similar Messages

Report with non aggregated and aggregated columns from different facts.

Hi,
We have got requirement as follows,
1) We have two dimension tables, and two fact(Fact1 and Fact2) table in physical.
2) In BMM we have made hierarchies for both dimensions, and are joins both logical fact table.
3)In fact1, we are having three measures of which we have made two as aggregation sum, and one is non aggregated(It contains character).
4)Fact2 have two measures, both are aggregation as sum.
5)Now here the problem arises, we want to make a report with some columns from dim and non aggrgated column from fact1 and and aggregated column fact2
How to resolve the above issue.
Regards,
Ankit

As suggested you really want to move your none-aggregated fact attributes to a logical dimension (using the same physical table as the logical fact). Map this in the BMM layer as a snowflake, Place a hierarchy on this dimension with (at minimum) Total -> Detail levels, then on the other fact table you want to include in the report, set the content level on your other fact measures to the 'Total' level for your new logical Dim and it will allow them to be present in the same report.

How to format the report with the aggregated value

Hi,
I have 2 characteristics and 3 KFs in the infocube.
First field is Cost Center
Second field is creation Date
3rd field is KF1
4th field is KF2
5th field is KF3
I have put the date field( in the row) as this is required for calculating formula for KFs. But I have set that as No display.
The date in the info cube is as follows.
Cost Ceneter Date( no Display)   KF1     KF2      KF3
CC1           01/01/2006          100     150      200
CC1           02/02/2006          75      100      95
CC1           05/02/2006          125      95      125
CC2           01/02/2006          75       25      85
CC2           02/02/2006          85       65      10
As the Date field is in query set to No display so the date appearing in the report is as follows
CC1       100        150        200
          75         100        95
          125          95        125
CC2       75           25        85
          85           65        10
But I want the aggregated value at cost senter level i.e.
CC1       300         245       420
CC2       160         90         95
I can not remove the Date frield from query as there is a formula variable defined on the date field.
Please let me know how to bring the report to the required format.
Bill
Message was edited by:
        Bill Bryan

If you are in new Bex, you can do it.
You will have to create another (set of) CKF on top of the current ones (which do exception aggregation on DOCNUM) and set the exception aggregation on date.
Say you have
CH1--CH2CH3--CKF1
To have a 'before aggregation' behavior for CKF1 when CH3 is not present, you will create a CKF2 = CKF1 with exception aggregation on CH3.
Now, if you want to remove CH2 and have the 'before aggregation' behavior you will need to create another CKF3 = CKF2 with exception aggregation on CH2.
ie for each level of aggregation, you will have to define a new CKF/Formula with corresponding exception aggregation - this is what will be needed to get you your output.
Message was edited by:
        Ajay Das

Tree Matrix Report with double line heading

Hi,
I am very new to HTML-DB and HTML as well.
I need to create a matrix report with a tree functionality and with two line heading.
Basically This is what I need to generate
REGION1 REGION2 REGION3
COL1 COL2 TOTAL COL1 COL2 TOTAL COL1 COL2 TOTAL
===========================================================
CAT1+
Sub_CAT1
Sub_CAT2
CAT2+
Sub_SCAT3
Sub_SCAT4
Where CAT1 , CAT2 needs to be collapsible rows. SCAT1..SCAT4 are sub categories under main categories.
REGION1.... REGION3 are top level headings. And COL1,COL2 are sub headings under top level headings.
Thanks,
Shri

Please help me on this!
Thanks,
Shri

Problem in Matrix with double Grouping

Hi,
Iam new to Oracle Reports 9i.
I am trying to create a matrix report with double grouping.
when i tried to do that. the report window showing an error and its trying to close.
When i go for single grouping it works fine, but when i do for double grouping iam getting the problem.
can anybody help me in resolving this issue.
thanks
pradeep

Hi Amit
Its working fine in my system
and also im getting the quantity value as 1.00 by using this code
Dim matrix1 As SAPbouiCOM.Matrix
        Dim oform As SAPbouiCOM.Form
        oForm = SBO_Application.Forms.Item("frm_test")
        matrix1 = oForm.Items.Item("1").Specific
        oForm.DataSources.DataTables.Add("Approval")
        oForm.DataSources.DataTables.Item("Approval").Clear()
        Dim Str_Query As String = "Select Father,Code,Quantity From ITT1"
        oForm.DataSources.DataTables.Item("Approval").ExecuteQuery(Str_Query)
        matrix1.Columns.Item("V_0").DataBind.Bind("Approval", "Code")
        matrix1.Columns.Item("V_1").DataBind.Bind("Approval", "Quantity")
        matrix1.LoadFromDatasource()
Thanks
Shafi

Aggregation issue for report with bw structure

Hi,
I am facing aggregation issue while grouping reports in webi.
We have a BW query with 16 values, which we bring to bw as structure. Out of 16, 8 are percentage values (agg. type should be average).
If we bring the data at site level, data is comming properly. But if we use same query and try sum/grouping( on region level), then percentage is getting added.
Since it's a dashboard report with lots of filters, we cannot go for seperate query at each level(site, region, zone).
How we can resolve this.. please give me suggestion.
Regards
Baby

Hi,
Since we were using structure, it was not possible to produce the required result in BO.
We change structure to keyfigures and bring all of them in to BO. All the column formulas are now in BO side.
Now it is working fine.
Regards
Baby
Edited by: Baby on May 10, 2010 11:39 AM

SSRS Report Returning Double Quote string from a Single Quote String

Hi, I'm getting weird thing in resultset from SSRS report when executed. When I pass parameter to a report, which passes String that has single quote value to a split function , it returns rows with double quote.
For example following string:
'N gage, Wash 'n Curl,Murray's, Don't-B-Bald
Returns:
''N gage, Wash ''n Curl,Murray''s, Don''t-B-Bald
through SSRS report.
Here is the split function Im using in a report.
CREATE Function [dbo].[fnSplit] (
@List varchar(8000),
@Delimiter char(1)
Returns @Temp1 Table (
ItemId int Identity(1, 1) NOT NULL PRIMARY KEY ,
Item varchar(8000) NULL
As
Begin
Declare @item varchar(4000),
@iPos int
Set @Delimiter = ISNULL(@Delimiter, ';' )
Set @List = RTrim(LTrim(@List))
-- check for final delimiter
If Right( @List, 1 ) <> @Delimiter -- append final delimiter
Select @List = @List + @Delimiter -- get position of first element
Select @iPos = Charindex( @Delimiter, @List, 1 )
While @iPos > 0
Begin
-- get item
Select @item = LTrim( RTrim( Substring( @List, 1, @iPos -1 ) ) )
If @@ERROR <> 0 Break -- remove item form list
Select @List = Substring( @List, @iPos + 1, Len(@List) - @iPos + 1 )
If @@ERROR <> 0 Break -- insert item
Insert @Temp1 Values( @item ) If @@ERROR <> 0 Break
-- get position pf next item
Select @iPos = Charindex( @Delimiter, @List, 1 )
If @@ERROR <> 0 Break
End
Return
End
FYI: I'm getting @List value from a table and passing it as a string to split function.
Any help would be appreciated!
ZK

Another user from TSQL forum posted this code which is returning the same resultset but when I execute both codes in SQL server it works and return single quote as expected.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8d5c96f5-c498-4f43-b2fb-284b0e83b205/passing-string-which-has-single-quote-rowvalue-to-a-function-returns-double-quoate?forum=transactsql
CREATE FUNCTION dbo.splitter(@string VARCHAR(MAX), @delim CHAR(1))
RETURNS @result TABLE (id INT IDENTITY, value VARCHAR(MAX))
AS
BEGIN
WHILE CHARINDEX(@delim,@string) > 0
BEGIN
INSERT INTO @result (value) VALUES (LEFT(@string,CHARINDEX(@delim,@string)-1))
SET @string = RIGHT(@string,LEN(@string)-CHARINDEX(@delim,@string))
END
INSERT INTO @result (value) VALUES (@string)
RETURN
END
GO
ZK

Report with 5 ALV grids on 1 screen

I am trying to build a screen/report with 5 ALV grids which are interactive. One grid will display all sales order. When I click on a Sales order Hotspot, the items of the sales order would appear in the ALV grid box below.
When i click on an sales order item hotspot, i want the delivery information in another alv grid in the same screen.
There should be 2 more grids - one displaying the customer information -name,address, in one grid and one grid for open items if any. Any advice is welcome . Should I be creating a split container/docking container or multiple containers ? Sample code is welcome.
Edited by: Shareen Hegde on Apr 2, 2008 9:25 PM

Hello Shareen
Below I have added my sample report ZUS_SDN_THREE_ALV_GRIDS showing three interactive ALV grids. Perhaps it might be useful to you. I would prefer one or multiple splitter containers over multiple "stand-alone" containers.
*& Report ZUS_SDN_THREE_ALV_GRIDS
*& Display Customer data in three ALV lists:
*& 1st ALV: Customers
*& 2nd ALV: Sales order of selected customer (double-click)
*& 3rd ALV: Positions   of selected sales order (double-click)
*&          Double-click on material -> display material (MM02)
*& NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
*& Flow logic of dynpro '0100':
*&PROCESS BEFORE OUTPUT.
*& MODULE STATUS_0100.
*&PROCESS AFTER INPUT.
*& MODULE USER_COMMAND_0100.
REPORT zus_sdn_three_alv_grids.
DATA:
gd_okcode        TYPE ui_func,
go_docking       TYPE REF TO cl_gui_docking_container,
go_splitter      TYPE REF TO cl_gui_splitter_container,
go_splitter_2    TYPE REF TO cl_gui_splitter_container,
go_cell_top      TYPE REF TO cl_gui_container,
go_cell_bottom   TYPE REF TO cl_gui_container,
go_cell_left     TYPE REF TO cl_gui_container,
go_cell_right    TYPE REF TO cl_gui_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid,
go_grid3         TYPE REF TO cl_gui_alv_grid.
DATA:
gt_knb1          TYPE STANDARD TABLE OF knb1,
gt_vbak          TYPE STANDARD TABLE OF vbak,
gt_vbap          TYPE STANDARD TABLE OF vbap.
PARAMETERS:
p_bukrs          TYPE bukrs DEFAULT '1000'.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender. " sending control, i.e. ALV grid that raised event
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_knb1      TYPE knb1,
      ls_vbak      TYPE vbak,
      ls_vbap      TYPE vbap.
*   Distinguish according to sending grid instance
    CASE sender.
      WHEN go_grid1.
        READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
        CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
        CALL METHOD go_grid1->set_current_cell_via_id
          EXPORTING
*              IS_ROW_ID    =
*              IS_COLUMN_ID =
            is_row_no    = es_row_no.
*         Triggers PAI of the dynpro with the specified ok-code
        CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDERS' ).
      WHEN go_grid2.
        READ TABLE gt_vbak INTO ls_vbak INDEX e_row-index.
        CHECK ( ls_vbak-vbeln IS NOT INITIAL ).
        CALL METHOD go_grid1->set_current_cell_via_id
          EXPORTING
*              IS_ROW_ID    =
*              IS_COLUMN_ID =
            is_row_no    = es_row_no.
*         Triggers PAI of the dynpro with the specified ok-code
        CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
      WHEN go_grid3.
        READ TABLE gt_vbap INTO ls_vbap INDEX e_row-index.
        CHECK ( ls_vbap-matnr IS NOT INITIAL ).
        SET PARAMETER ID 'MAT' FIELD ls_vbap-matnr.
        CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
      WHEN OTHERS.
        RETURN.
    ENDCASE.
ENDMETHOD.                    "handle_double_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = p_bukrs.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
    EXPORTING
      parent            = go_docking
      rows              = 1
      columns           = 2
*      NO_AUTODEF_PROGID_DYNNR =
*      NAME              =
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = go_cell_left.
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 1
      column    = 2
    RECEIVING
      container = go_cell_right.
* Create 2nd splitter container
CREATE OBJECT go_splitter_2
    EXPORTING
      parent            = go_cell_left
      rows              = 2
      columns           = 1
*      NO_AUTODEF_PROGID_DYNNR =
*      NAME              =
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter_2->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = go_cell_top.
CALL METHOD go_splitter_2->get_container
    EXPORTING
      row       = 2
      column    = 1
    RECEIVING
      container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_cell_top
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_cell_bottom
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid3
    EXPORTING
      i_parent          = go_cell_right
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid3.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbak.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'VBAK'
    CHANGING
      it_outtab        = gt_vbak    " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbap.
CALL METHOD go_grid3->set_table_for_first_display
    EXPORTING
      i_structure_name = 'VBAP'
    CHANGING
      it_outtab        = gt_vbap    " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
* Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "ORDERS"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Refresh display of detail ALV list
CALL METHOD go_grid3->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
*   User has pushed button "Display Orders"
    WHEN 'ORDERS'.
      PERFORM customer_show_orders.
    WHEN 'ORDER_DETAILS'.
      PERFORM order_show_details.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form CUSTOMER_SHOW_ORDERS
*       text
* --> p1        text
* <-- p2        text
FORM customer_show_orders .
* define local data
DATA:
    ld_row      TYPE i,
    ls_knb1     TYPE knb1.
CALL METHOD go_grid1->get_current_cell
    IMPORTING
      e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT        * FROM vbak INTO TABLE gt_vbak
         WHERE kunnr = ls_knb1-kunnr.
REFRESH: gt_vbap.
ENDFORM.                    " CUSTOMER_SHOW_ORDERS
*&      Form ORDER_SHOW_DETAILS
*       text
* --> p1        text
* <-- p2        text
FORM order_show_details .
* define local data
DATA:
    ld_row      TYPE i,
    ls_vbak     TYPE vbak.
CALL METHOD go_grid1->get_current_cell
    IMPORTING
      e_row = ld_row.
READ TABLE gt_vbak INTO ls_vbak INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT        * FROM vbap INTO TABLE gt_vbap
         WHERE vbeln = ls_vbak-vbeln.
ENDFORM.                    " ORDER_SHOW_DETAILS
Regards
Uwe

A big problem of Generate report with PDF format....Urgent

I want to generate a report with pdf format through one java file, it have two page 1)gen_report.jsp 2) report_gen.java , the compliation was failed. However, i don't what the problem is .... i hope anyone can help me as it is very argent for me ....Thanks a lot
1)gen_report.jsp
<table id="AutoNumber1">
   <tr>
     <td background="images/top5movie.png">
     <p align="center"> </p>
    </td>
   </tr>
   <tr>
   <td >
      <div align="center">
        <table id="AutoNumber2" >
              <form method="GET" action="../report_gen" name="report_gen" target="_blank" onSubmit="javascript:return checkr1(this)">
                <tr>
                  <td ><b>Report Description:</b></td>
                  <td >This report is to show the top five popular movies in cinemix for a period </td>
                </tr>
                <tr>
                  <td><b>Data scope:</b></td>
                  <td >Start from
                  <input type="text" name="start" value="2003-1-1" >to
                  <input type="text" name="end" value="2006-1-1" ></td>
                 </tr>
                 <tr>
                  <td><b>Data processing:</b></td>
                  <td >Show
                    <select name="order_by">
                      <option value="desc" selected>top</option>
                      <option value="asc">bottom</option>
                    </select>
                  5 films</td>
                </tr>
                <tr>
                  <td> <p align="center">
                      <input type="submit" value="View_Report" name="subm">
                    </p></td>
                </tr>
                <input type="hidden" name="report" value="r1">
              </form>
              <form method="GET" action="../report_gen" name="report_gen" target="_blank" onSubmit="javascript:return checkr2(this)">
                <input type="hidden" name="report" value="r2">
              </form>
            </table>
     </div>
      </td>
    </tr>
</table>Then my java code is here
report_gen.java
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.sql.*;
// chart and pdf out
import java.awt.Graphics2D;
import java.awt.geom.Rectangle2D;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import org.jfree.chart.ChartFactory;
import org.jfree.chart.JFreeChart;
import org.jfree.chart.plot.PlotOrientation;
import org.jfree.data.category.DefaultCategoryDataset;
import org.jfree.data.xy.*;
import org.jfree.data.xy.XYBarDataset;
import org.jfree.data.general.DefaultPieDataset;
import org.jfree.data.statistics.SimpleHistogramDataset;
import org.jfree.data.xy.XYSeries;
import org.jfree.data.xy.XYSeriesCollection;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.Rectangle;
import com.lowagie.text.pdf.DefaultFontMapper;
import com.lowagie.text.pdf.PdfContentByte;
import com.lowagie.text.pdf.PdfTemplate;
import com.lowagie.text.pdf.PdfWriter;
import com.lowagie.text.*;
import com.lowagie.text.pdf.*;
import com.lowagie.text.pdf.PdfPCell;
public class report_gen extends HttpServlet
   private final String titles[] = {"Top Five popular movies ",
                    "Financial cirumstance of cinemas",
                    "Distribution of time segment",
                    "Distribution of favourite movie type"
   private final String descs[] = {"This report is to show the top five popular movies in cinemix for a period ",
               "This report is to show the financial circumstance of each cinema site ",
               "This report is to analysis the customer when is the most visit time ",
               "This report is to analysis the customer which type of movie do they watch the most"
    private final String bigTitle = "Cinemix";
    private final String driver = "org.gjt.mm.mysql.Driver";
    private final String url= "jdbc:mysql://localhost:3306/cinemix";
    private final String userID = "abc";
    private final String passwd = "abc";
    public void init(ServletConfig config) throws ServletException
      super.init(config);
   protected void doGet(HttpServletRequest request, HttpServletResponse response)
   throws ServletException, IOException
      final int width = 550;
     final int height = 200;
/ title font (centre and report title)
     final Font fTitle0 = FontFactory.getFont("Helvetica", 42, Font.BOLD);
     final Font fTitle1 = FontFactory.getFont("Helvetica", 30, Font.BOLD);
          // centre name:
    final String title0 = bigTitle;
   // Default category for DefaultCategoryDataset
   final String cat = "data";
   Connection conn;
JFreeChart chart;
   String title1     = "xyz Report";
   String chartDesc = "description";
   String notes[] = new String[4];
   String chartTitle = "so bad this is title";
   String chartXTitle = "this is x";
   String chartYTitle = "this is y.";
   String report = request.getParameter("report");
   int max=-10000;
   int min=10000;
   int j=0;
// do some basic checking
   if (report == null || report.equals(""))
     report = "-1"; // this course unknow report error message
     String start   = request.getParameter("start");
     String end = request.getParameter("end");
     String order_by = request.getParameter("order_by"); // ToDo: check invalid string
       int topN = 5;
    String order = (order_by.equals("desc")) ? "Top" : "Last";
   String inv[] = {"08:30", "09:30", "10:30", "11:30", "12:30", "11:30", "12:30", "13:30", "14:30", "15:30", "16:30", "17:30","18:30","19:30","20:30","21:30","22:30","23:30"};
     int inv_val[] = new int[inv.length - 1];
     try
        Class.forName(driver).newInstance();
         catch(Exception e)
        printE("Cannot load mysql database driver!", response);
          e.printStackTrace();
           return;
       try
             conn = DriverManager.getConnection(url, userID, passwd);
              if (report.equals("r1")) { // report 1
           DefaultCategoryDataset dataset = new DefaultCategoryDataset();
          Statement stmt = conn.createStatement();
          String sql = "select *,count(f.Name),f.Name from film f, filmDetail fd, ticket t where f.startDate > '" + start + "' and f.endDate < '" + end + "'and fd.filmID = f.filmID and fd.filmDetailID = t.filmDetailID group by f.name order by fd.filmDetailID asc limit '" +topN+"'";
          ResultSet rs = stmt.executeQuery(sql);
        while (rs.next())
       if (rs.getInt("fd.filmDetailID") > max) max = rs.getInt("fd.filmDetailID");
     if (rs.getInt("fd.filmDetailID") < min) min = rs.getInt("fd.filmDetailID");
      j++;
       ataset.setValue(rs.getInt("fd.filmDetailID"), cat,rs.getString("f.Name"));
       title1     = titles[0];
     chartDesc = descs[0];
     chartTitle = order + " " + topN + " popular movie";
      chartYTitle = "Box Office record";
      chartXTitle = "Film Name";
      gender = " ";
      chart = ChartFactory.createBarChart(chartTitle, chartXTitle,   chartYTitle, dataset,PlotOrientation.VERTICAL, false, true, false);
    else
          print("Error: I don't inderstand your request!", response);
     return;
       catch (SQLException e)
     printE("Cannot open database connection? <br>", response);
     // printE(e.toString);
e.printStackTrace();
return;
     response.setContentType("application/pdf");
     Document document = new Document(PageSize.A4, 5, 5, 5, 5);
    try
         PdfWriter writer;
     writer = PdfWriter.getInstance(document, response.getOutputStream());
    HeaderFooter footer = new HeaderFooter(new Phrase("Page: "), true);
     footer.setBorder(Rectangle.NO_BORDER);
document.setFooter(footer);
               footer.setAlignment(Element.ALIGN_CENTER);
               // step 3
               document.open();
               document.add(getHeader(title0, title1, start, end, gender, order, topN, chartDesc));
               document.add(printChart(chart, writer));
               document.add(getFooter(notes));
          catch(DocumentException de)
               de.printStackTrace();
          // step 5
          document.close();
          return;
     }// end doGet()
     /** Handles the HTTP <code>POST</code> method.
      * @param request servlet request
      * @param response servlet response
     protected void doPost(HttpServletRequest request, HttpServletResponse response)
          throws ServletException, IOException
          // processRequest(request, response);
     /** Returns a short description of the servlet.
     public String getServletInfo()
          return "Generate reports for " + bigTitle;
     /* To print en error and exit(?) */
     private void printE(Object obj, HttpServletResponse response) throws IOException
          response.setContentType("text/html");
          PrintWriter out;
          out = response.getWriter();
          out.print(obj.toString());
          out.close();
          // To-Do: how to force exiting?
     // create data chart
     private PdfPTable getHeader(String title0, String title1, String start, String end, String sex, String order, int topN, String desc)
          Font fTitle0 = FontFactory.getFont("Helvetica", 42, Font.BOLD);
          Font fTitle1 = FontFactory.getFont("Helvetica", 24, Font.BOLD);
          Font fTitle3 = FontFactory.getFont("Helvetica", 12, Font.BOLD);
          Font fValue = FontFactory.getFont("Helvetica", 12, Font.UNDERLINE);
          Paragraph parStartEnd = new Paragraph();
          parStartEnd.add(new Phrase("Data start from:                  ", fTitle3));
          parStartEnd.add(new Phrase(start, fValue));
          parStartEnd.add(new Phrase("     to     ", fTitle3));
          parStartEnd.add(new Phrase(end, fValue));
          Paragraph parGenerateDate = new Paragraph();
          parGenerateDate.add(new Phrase("Report generated at:         ", fTitle3));
          parGenerateDate.add(new Phrase(new java.util.Date().toString(), fValue));
          Paragraph parGender = new Paragraph();
          parGender.add(new Phrase("Current show gender:       ", fTitle3));
          parGender.add(new Phrase(sex, fValue));
          Paragraph parTopN = new Paragraph();
          parTopN.add(new Phrase("Now is showing                 ", fTitle3));
          parTopN.add(new Phrase(order, fValue));
          parTopN.add(new Phrase(" ", fValue));
          parTopN.add(new Phrase(new Integer(topN).toString(), fValue));
          parTopN.add(new Phrase("   record(s)", fTitle3));
          // Start main table
          PdfPTable tblMain = new PdfPTable(1);
          tblMain.getDefaultCell().setBorder(0);
          // Print title
          tblMain.getDefaultCell().setHorizontalAlignment(Element.ALIGN_CENTER);
          tblMain.addCell(new Paragraph(title0, fTitle0));
          tblMain.addCell(new Paragraph(title1, fTitle1));
          tblMain.addCell("");
          tblMain.addCell("");
          tblMain.addCell("");
          // Print headers data
          //tblMain.getDefaultCell().setHorizontalAlignment(Element.ALIGN_RIGHT);
          //tblMain.addCell(parInvoiceNum);
          //tblMain.addCell("");
          tblMain.getDefaultCell().setHorizontalAlignment(Element.ALIGN_LEFT);
          tblMain.addCell(parStartEnd);
          tblMain.addCell("");
          tblMain.addCell(parGenerateDate);
          tblMain.addCell("");
          if (sex != " ")
               tblMain.addCell(parGender);
          else if(order != null && topN > 0)
               tblMain.addCell(parTopN);
          else
               tblMain.addCell(" \n");
          tblMain.addCell("");
          tblMain.setWidthPercentage(96);
          tblMain.addCell(new Paragraph("Description of this report:", fTitle3));
          tblMain.addCell(desc);
          tblMain.addCell("\n");
          // Finish main table
          return tblMain;
     // print a chart _directly_ to pdf and return a empty Pdftable...
     public PdfPTable printChart(JFreeChart chart, PdfWriter writer)
          PdfContentByte cb = writer.getDirectContent();
          int width = 550;
          int height = 450;
          PdfTemplate tp = cb.createTemplate(width, height);
          Graphics2D g2d = tp.createGraphics(width, height, new DefaultFontMapper());
          Rectangle2D r2d = new Rectangle2D.Double(0, 0, width, height); //->,
          chart.draw(g2d, r2d);
          g2d.dispose();
          cb.addTemplate(tp, 20, 170);
          // quick method to push down the footer text
          // the only things this method return
          PdfPTable tblDownDown = new PdfPTable(1);
          tblDownDown.getDefaultCell().setBorder(0);
          tblDownDown.addCell(" \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n");
          tblDownDown.addCell(" \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n");
          tblDownDown.addCell(" \n \n \n \n \n \n");
          return tblDownDown;
     public PdfPTable getFooter(String notes[])
          Font fNote = FontFactory.getFont("Helvetica", 14, Font.UNDERLINE);
          Font fComment = FontFactory.getFont("Helvetica", 12, Font.ITALIC);
          Font fTitle1 = FontFactory.getFont("Helvetica", 30, Font.ITALIC);
          // Start footer table
          PdfPTable tblFooter = new PdfPTable(1);
          tblFooter.getDefaultCell().setBorder(0);
          if (notes != null)
               tblFooter.addCell(new Paragraph("Notes:", fNote));
               tblFooter.addCell("");
               tblFooter.addCell("");
               tblFooter.getDefaultCell().setHorizontalAlignment(Element.ALIGN_LEFT);
               for (int i=0;i<notes.length;i++)
                    if (notes[i] != null)
                         tblFooter.addCell(new Paragraph("" + (i+1) + ". " + notes[i] + "", fComment));
                         tblFooter.addCell("");
                         tblFooter.addCell("");
                    tblFooter.getDefaultCell().setHorizontalAlignment(Element.ALIGN_CENTER);
                    tblFooter.addCell(new Paragraph("- End of report -", fComment));
                    return tblFooter;
}

Go to the cache directory and see if you can open the report directly from here (not in IE).
I have seen posts on problems with Acrobat Reader Plugin for IE (I believe it was version 6 of Reader).

In need help: Analytic Report with Group by

Good morning,
I am trying to create a report with subtotal and grand total, which of couse goes to the group by clause, with rollup, cube, grouping... etc. I'd like to use rollup, then some columns in the Select list have to be put into the Group By clause, which is not supposed to be. So I had to use one of SUM, AVG, MIN and MAX functions, to make those columns as *aggregated, which is wrong.
Another alternative I tried is to use Cube and Grouping_id to be the filter. However, that is still very cumbentsome and error-prone, also the order of the display is absolutely out of control.
I am trying hard to stick to the first option of using the Rollup, since the result is very close to what I want, but avoid the usage of aggregation functions. For example, if I want to display column A, which should not be grouped. Other than using those aggregation functions, what I can do?
Thanks in advance.

Luc,
this is a simple and a good reference for analytic functions:
http://www.orafaq.com/node/55
It takes some time to understand how they work and also it takes some time to understand how to utilize them. I have solved some issues in reporting using them, avoiding the overkill of aggregates.
Denes Kubicek

Double aggregation in a single query block doesn't make any sence.

How can I argue with something that apparently has been cast in stone by ANSI SQL committee? Well the answer is famous: "Search any park in any city: you'll find no statue of committee".
OK, why
select count(1) from (
select deptno from emp
group by deptno
is an easy to understand query, and why
select count(count(*)) from emp
group by deptno
is not? I already mentioned one reason why count shouldn't accept any arguments, therefore count(count(*)) is a nonsence.
The other reason is that aggregation without grouping is essentially aggregation within a single group. Once you realize that
select sum(1) from emp
is the same as
select sum(1) from emp
group by -1
(where -1 or any other constant for that matter is a dummy pseudocolumn), then it becomes obvious that what we are doing in the infamous
select count(count(*)) from emp
group by deptno
is a query with two blocks
select count(1) from (
select deptno from emp
group by deptno
) group by -1
We are not allowed to combine two "group by" into a single query, aren't we?

Aggregate function always goes together with grouping. Grouping can partition the set of rows into many classes or a single class. Therefore, if we have 2 nested aggregation functions, we'd better be able to identify the corresponding groupings easily:
select state, avg(min(tax_return)) from household
group by city, state then statewhich is a shorthand for
select state, avg(m) from (
   select city, state, min(tax_return) m
   from household
   group by city, state
) group by stateSpeaking of double aggregation, it is frequent in graph queries. The part explosion query is posted repeatedly virtually every month on this fine forum:-) The part explosion is double aggregation: multiply the quantities along each path in the assembly hierarchy. Then add the quantities along alternative paths. Likewise, finding a shortest path between two nodes in a graph is double aggregation query. First, we calculate the length buy adding the distances along each path, and then we choose a path with minimal length. Wouldn't it be nice to have this double aggregation wired into the connect by syntax? Note that connect_by_path is a surrogate aggregate which concatenates strings. People invent all kind of functions which parse this path and make other aggregates out of this value (such as sum and product).

Bug with double division ??

Hello,
first sorry my bad english...
I am trying to convert a C program in java and i had a big problem with double division.
For example, my program needs to do that :
double d = 2. * 3.1415926 ;
double d2=511;
double d3=d/d2;
The value in memory of d3 is 0x3f892e92965e074e whereas with my original C program, for the same code) the value in memory is 0x3f892e92965e074d !!!!!! (the last byte is different)
So what is the problem ? Is the double division in java different with the C language or is it my code which has a problem ??
Thanks a lot

It could be different than (some implementation of) C, but that doesn't mean it's a bug or a problem. Java is supposed to implement an IEEE floating point specification; if you can demonstrate that it's not following that spec (I think it's IEEE 754) then report it as a bug. Incidentally, do Java and your version of C implement 3.1415926 the same way?
(Also, if that number is supposed to be pi, then the inaccuracy you claim in Java is much less than the inaccuracy you made by using an approximation to pi.)

Custom report with FAGLFLEXA and "Document type"

We have new GL and we must do a custom report like this:
Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy
Profit centre 1_____________________ c1_______________d1
Profit centre 2_____________________ c2_______________d2
ect. ....
The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
The "Document type" is what worries me.
I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table FAGLFLEXT not contain the field "document type").
The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
Please, help me what exactly to do?My questions are these?
My principals questions are these:
1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
3. If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
All suggestions are welcome.
Thank you in advance. Many points to assign who will help me to solve this problem

I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
http://smlets.codeplex.com/

Summary Report with 4 Dimensions and 5 Facts

Hello OBIEE Czars:
I have a problem.
I am trying to make a summary report with 4 Dimensions and 5 Facts.
Out of that only 2 Dimensions are Confirmed.
Now when I try to bring in all the facts, I get view display error.
I searched forum for similar issues.
So I have tried following so far.
1) Add other dimensions as source and set level to Total for those dims.
- After doing this, I dont get view display error, but I get blank rows for couple of facts.
2) I am already aggregating all the measures.
Please help me out.
This forum has been very helpful so far.
Thanks.
~Vinay

Hi
This method seems fine until you run a request that includes a filter on an unconformed dimension.
The SQL itself should be quite straightforward (see below) but the BI Server instance does not seem to be joining this data correctly after posting the 2 separate queries to the database.
SELECT
x.dim1, x.dim2
x.fact1_agg_measure
y.fact2_agg_measure
FROM
SELECT
dim1, dim2
SUM(fact1.measure) fact1_agg_measure
FROM
dim1,
dim2, --UNCONFORMED+
fact1
WHERE
.... .... join fact1 to dimensions as normal
AND dim2 = 'BUSINESS_IDENTFIER'
GROUP BY
dim1, dim2
) x,
SELECT
dim1
SUM(fact2.measure) fact2_agg_measure
FROM
dim1,
fact2
WHERE
.... .... join fact2 to dimensions as normal
GROUP BY
dim1
) y
WHERE
x.dim1 = y.dim1
The result set returned in Answers is firstly a correctly aggregated record plus ALL rows from the second query above ??
Just wondering if anyone else has come across this issue?
cheers
Tony

ALV Reporting with drill down capabillities

I'm creating a abap custom report using the ALV. I want to drill down to CJ03 which is projects. I know how to do it in regular custom reporting, but I don't seem to be able to get it to work using the ALV. Can anyone help?
Thanks.
Linda

Hi Linda,
Take a look at this sample program. The logic to handle any interaction with the user is in my "PORCESS_USER_COMMANDS" routine.
This is defined in the "I_CALLBACK_USER_COMMAND" parameter in the ALV FM.
Hope this helps.
Cheers,
Pat.
[code]
Modification History
Date      | Author    | Chg Req #     | Description
15.08.2001| Pat Yee   | $TMP          | Program Creation
This program is an example of how the ALV Display works.
It will display Customer Data.
This report will also show how to display an ALV report with different
colored lines and icons
REPORT zpat.
Include Programs
INCLUDE <icon>.
Database Tables
TABLES: kna1.                  "Customer Master
Types
TYPE-POOLS: kkblo.
Structures
Structure to hold the Color Information
DATA: BEGIN OF st_color,
        color(3) TYPE c,
      END OF st_color.
Structure to hold the Icon Information
DATA: BEGIN OF st_icon,
        icon(4) TYPE c,
      END OF st_icon.
ALV Field Catalog Structure
DATA: st_fieldcat   TYPE slis_fieldcat_alv.
ALV Layout Structure
DATA: st_layout     TYPE slis_layout_alv.
Internal Tables
Output Table
DATA: BEGIN OF tbl_kna1 OCCURS 0.
        INCLUDE STRUCTURE st_icon.   "Icon Structure
        INCLUDE STRUCTURE kna1.      "Customer Master Structure
        INCLUDE STRUCTURE st_color. "Color Structure
DATA: END OF tbl_kna1.
ALV Field Catalog Table
DATA: tbl_fieldcat TYPE slis_t_fieldcat_alv.
Variables
DATA: fieldname(30) TYPE c,
      g_repid       LIKE sy-repid.
Start of Selection
START-OF-SELECTION.
g_repid = sy-repid.
PERFORM get_data.
End of Selection
END-OF-SELECTION.
PERFORM do_fancy_stuff.
PERFORM get_layout.
PERFORM get_fieldcat.
PERFORM create_report.
*&      Form CREATE_REPORT
      Learn to read the subroutine name!
FORM create_report.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            i_interface_check       = ' '
            i_callback_program      = g_repid
            i_callback_user_command = 'PROCESS_USER_COMMANDS'
            it_fieldcat             = tbl_fieldcat
            i_default               = 'X'
            i_save                  = ' '
            is_layout               = st_layout
       TABLES
            t_outtab                = tbl_kna1
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                               " CREATE_REPORT
*&      Form GET_FIELDCAT
      Build the Field Catalog
FORM get_fieldcat.
Here the field catalog is created. To display more fields simply
'uncomment' the additional lines and add the field name. Also note
that the field catalog is much more powerful than this. You can
intensify fields, change the colour, assign reference fields, etc.
Look at type slis_fieldcat_alv for more options.
PERFORM write_fieldcat USING 'ICON' 'TBL_KNA1' '    ' 'X' 1 '2' 'X'
PERFORM write_fieldcat USING 'KUNNR' 'TBL_KNA1' 'KNA1' 'X' 2 ' ' ' '
PERFORM write_fieldcat USING 'NAME1' 'TBL_KNA1' 'KNA1' ' ' 3 '10' ' '
                               'X'.
PERFORM write_fieldcat USING 'STRAS' 'TBL_KNA1' 'KNA1' ' ' 4 ' ' ' '
PERFORM write_fieldcat USING 'TELF1' 'TBL_KNA1' 'KNA1' ' ' 5 ' ' ' '
PERFORM write_fieldcat USING 'ORT01' 'TBL_KNA1' 'KNA1' ' ' 6 ' ' ' '
PERFORM write_fieldcat USING 'PSTLZ' 'TBL_KNA1' 'KNA1' ' ' 7 ' ' ' '
PERFORM write_fieldcat USING 'SORTL' 'TBL_KNA1' 'KNA1' ' ' 8 ' ' ' '
PERFORM write_fieldcat USING 'ERNAM' 'TBL_KNA1' 'KNA1' ' ' 9 ' ' ' '
PERFORM write_fieldcat USING 'SPRAS' 'TBL_KNA1' 'KNA1' ' ' 10 ' ' ' '
perform write_fieldcat using '     ' 'TBL_KNA1' 'KNA1' ' ' 10 ' '.
perform write_fieldcat using '     ' 'TBL_KNA1' 'KNA1' ' ' 11 ' '.
perform write_fieldcat using '     ' 'TBL_KNA1' 'KNA1' ' ' 12 ' '.
ENDFORM.                               " GET_FIELDCAT
*&      Form WRITE_FIELDCAT
      Write the Field Catalog data to the Field Catalog Table
     -->name   Field name
     -->tab    Table name
     -->st     Structure Name
     -->key    Is this field a Key?
     -->pos    Position Number
     -->length Field Length
     -->icon   Display as Icon
     -->hot    Hotspot
FORM write_fieldcat USING name tab st key pos length icon hot.
st_fieldcat-fieldname   = name.
st_fieldcat-tabname     = tab.
st_fieldcat-ref_tabname = st.
st_fieldcat-key         = key.
st_fieldcat-col_pos     = pos.
st_fieldcat-outputlen   = length.
st_fieldcat-icon        = icon.
st_fieldcat-hotspot     = hot.
APPEND st_fieldcat TO tbl_fieldcat.
CLEAR st_fieldcat.
ENDFORM.                               " WRITE_FIELDCAT
*&      Form PROCESS_USER_COMMANDS
      Interactive Reporting Commands
FORM process_user_commands USING syst-ucomm LIKE syst-ucomm
                                 selfield TYPE slis_selfield.
This subroutine is called when there is user interaction in the output
In this case if the user double clicks the Customer Number then the
program will call transaction XD03 and display the Customer Master
Data
CASE syst-ucomm.
    WHEN '&IC1'.
get cursor field fieldname.
      READ TABLE tbl_kna1 INDEX selfield-tabindex.
      SET PARAMETER ID 'KUN' FIELD tbl_kna1-kunnr.
      CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                               " PROCESS_USER_COMMANDS
*&      Form GET_LAYOUT
set the layout of the ALV.
add color to the row?
FORM get_layout.
st_layout-info_fieldname    = 'COLOR'.
st_layout-colwidth_optimize = 'X'.
st_layout-get_selinfos      = 'X'.
ENDFORM.                    " GET_LAYOUT
*&      Form get_data
      Get some data to play with
FORM get_data.
SELECT * FROM kna1 INTO CORRESPONDING FIELDS OF TABLE tbl_kna1
         UP TO 30 ROWS.
ENDFORM.                    " get_data
*&      Form do_fancy_stuff
      Do some fancy pants stuff for example changing the color of
      lines and adding icons
FORM do_fancy_stuff.
Here we will demonstrate changing the color of ALV Record lines as
well as displaying Icons
LOOP AT tbl_kna1.
All records where NAME1 begins with 'M', will be displayed in Bluish
Green
    IF tbl_kna1-name1(1) EQ 'M'.
      tbl_kna1-color = 'C41'. "Bluish Green
      MODIFY tbl_kna1 TRANSPORTING color.
    ENDIF.
All records with no TELF1 will be displayed in White and have a
Warning Icon
    IF tbl_kna1-telf1 IS INITIAL.
      tbl_kna1-color = 'C00'. "White
      tbl_kna1-icon = '@AH@'. "Warning Icon
      MODIFY tbl_kna1 TRANSPORTING icon color.
    ENDIF.
ENDLOOP.
ENDFORM.                    " do_fancy_stuff[/code]

Report with double aggregation

Similar Messages

Maybe you are looking for