Reporting glitch in Settings...

I wanted to report bug/glitch with tab-switch in "Settings" in "Manage Storage" under the "iCloud" category. Not sure if anyone else has experienced it or not. Little hard to explain but I will do my best. I was managing the apps in iCloud backup section, basically switching off to most of the apps listed. I slide it to off, the prompt appears asking if I'm sure I want to turn it off, but right as Im about to "ok" the deletion, it slides back to on. I still ok the request and skip over the next app to slide off and when I do this, the one app I had a problem with switch sliding back to its previous position suddenly slides to off. It does it almost every time. Sometimes, several switches that were switched off suddenly appears to be switched back to on and then when I switch off another app, then I see them one-by-one slide back to off without any help from me.
Anyone else irritated that in order to delete a long list of apps and such that you must select okay before proceeding. Takes time and rather slow.
I would like to be able to report bugs or glitches in the future and wonder if there's a designated page or email address for bug/glitch/error reports to be sent in by users.
Thanks. I hope I haven't confused and/annoyed with my discussion. It's rather complexed in my mind therefore my description would be just as complexed.

You can give feedback to Apple on this page : http://www.apple.com/feedback/ipad.html

Similar Messages

Same Application Error - while checking the auditing log report in site settings

dear all,
I am getting application error - when I am checking the audit log report from
Site Settings ->Audit log->Run a custom report ->In the save location - when I click browse button.
Any inputs to solve the issue will be helpful?
Cheers
Sathya

Hi,
Try to configure audit settings for a site collection as the link below:
https://support.office.com/en-us/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Or check the blogs below:
http://sharepointthomas.blogspot.com/2011/07/how-to-enable-audit-functionality-in.html
http://www.codeproject.com/Articles/431342/Auditing-A-Built-in-Feature-of-SharePoint
Did you check the ULS log?
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Result set too large in BI report; Safety belt settings in WAD

Hello All,
When we run a BI report, the error " Result set is too large; data retrieval restricted by configuration" appears. We did a search on SAP portal and found the SAP note 1127156, whics recommends the configuaration of safety belt to limit memory used.
Acoordingly the cust table RSADMIN has been configured. But on the web template side, we need to configure the changes as well. The note says:
"1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
Maximum Number
Default Number
Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template."
I am trying to locate these options in the context menu in Web Applications designer but in vain.
Can anyone help...

This option is not available in WAD, it will be available when you run the web template under settings, Data Provider for the standard template 0ANALYSIS_PATTERN.
If you have a custom template you will have to use the Dataprovider settings web item in your custom template to change the values during runtime.

Retrieve crystal report file print settings

I have crystal reports 10 report file, in which I edited the printer settings... collate and number of copies(2) and saved it.
now i want to print it from VB6. I am using a customized print dialog form (not using the common dialog control)
I want to get the collate and number of copies settings from the rpt file. how can I get those details. any API available?

Hello Sankar ,
as you refer to the legacy technology VB6 I recommend to post this query to the [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs; forum.
This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, VCL, and Crystal Reports Print Engine (CRPE).
It is monitored by qualified technicians and you will get a faster response there.
Also, all Legacy Application Development SDKs queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Can Bridge report in-camera settings for White Balance?

No matter what settings I choose in Bridge Preferences, I cannot get it to tell me what was the White Balance (WB) setting of the camera when raw images were shot.
This seems an odd omission because Camera Raw is passed this information and displays images correctly, although it doesn't report what WB value it was given, only that what you are viewing, prior to any editing, is the default "As Shot".
I'm referring to raw files shot on my Canon 300D, Nikon D700 and Canon 5D Mark II.
Currently I'm using PsCS6 (13.0.1.2 x64), Bridge CS6 (5.0.2.4 x64) and ACR 8.1 on a Windows 7 x64 8GB system, but the same omission existed on the same Windows system with ACR 7.x in CS6 and all releases of PsCS5, Bridge CS5 and ACR 6.6 and 6.7.
On the opening dialog of Bridge Preferences, at the bottom you can choose whether or not you wish to 'Hide Empty Fields'. Selecting or unselecting this option does not have any effect upon Bridge's inability to report WB when, from within Bridge, you select File Info from the File menu or by hitting Ctrl + I.
The only locations in Bridge Preferences I can find that need selection (and which I have selected) for Bridge to supply WB information upon invoking File Info are here:
Preferences\Metadata\Camera Data (Exif)\White Balance; and
Preferences\Metadata\Camera Raw\White Balance
I have also selected Preferences\Metadata\File Properties\Supports XMP, and yet Bridge fails to give the in-camera WB in the Camera Data tab of File Info.
I have been able to locate references to WB in the following tabs of File Info:
File Info\Advanced, where there appears, under the sub-tab 'Exif Properties (http://ns.adobe.com/exif/1.0)', an entry such as 'exif:White Balance:1'; and
File Info\Raw Data an entry such as '<exif:White Balance >1< /exif:White Balance>'.
However, these are just code numbers, not names like 'Cloudy' or 'Shade', and they are not only inconsistent (both showing the code 1 for an unedited image I know was shot with Auto WB and another unedited image I know was shot with Flash WB) but also it would appear that the codes may refer to the WB as modified by ACR - because an image I know had its in-camera WB of Auto altered in ACR shows a code of 'Custom' rather than 0, 1 or some other number.
So what am I missing? Does anyone know how to make Bridge Preferences display the in-camera setting for WB, and if so, under which tab of File Info do you look for the answer once you have set up Preferences properly?
Message was edited by: Andrew_Hart
Just corrected my current Photoshop version

I'm afraid that you just haven't addressed the question that I asked in my original post.
I still like to think I have but if you for whatever reason need this info showing in the metadata you probably be better of trying to alter it your self or find a way to address Paul personally (maybe via a private message).
I have not heard from him for a long time and a small google search provided me with this forum post, hope it helps you, maybe you can also persuaded Paul to come back, he is very missed!
http://www.ps-scripts.com/bb/viewtopic.php?f=2&t=5508

Using JavaScript to create reports listing security settings

Hi...I'm trying to create an Acrobat 8 batch process using a JavaScript that creates a log/report that lists the security settings for each PDF in a directory. I want to be able to periodically run this script so that I can ensure that (a)each file uses the departmental permissions password and (b) that the set of permissions (copying not allowed etc.) are set according to our standard.
I've looked at the JavaScript reference etc. but am seriously confused. There's a securityhandler object but how can I use that (or something else) to get a list of the doc's security permissions and to check that password x has been used?
Many thanks.

You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks !

Report and Notification Settings don't work anymore

I click on Customize Settings and get:
I can't configure anything! Also all my reports have stopped being emailed to me! Did the website 'redo' mess something up?

Hi Dennis Marsden!
Thank you for helping me.
It doesn't work...
I mean that when I try to drag a folder or the entire disk to the privacy tab, the privacy tab remaines empty...
When I use the "+" button to browse the Finder and choose a folder, the privacy tab remaines empty too...
I've got another problem too. Maybe both are tied, that's why I'll explain it :
Sometimes, I am not able to rename a folder or a file... When I try to delete the name, it just doesn't work... And sometimes, it works properly...
For example, yesterday, I created a new folder automatically called "New folder", and I couldn't change the name !
But today, it has worked properly. But the problem happens so often, that today really is an exception...
Thank you very much !
Paaach'

BUG report - Inconsistent IR settings in Builder

Apex 4.0.2
Most of the reports used in the App Builder have been converted to use Interactive reports which is great. But I find that the IR settings are not consistent across all the reports. I had reported this during the tryapexnow.com beta phase. Now that we can use the new apex_application_install API to load up the Builder apps into our own workpace so we can review how they are built, the Region Utilities > Update Interactive Report Settings page shows this. Or just run the query
select
page_id, name, allow_save_rpt_public, show_finder_drop_down, show_display_row_count, show_search_bar, show_search_textbox, show_actions_menu, show_select_columns, show_rows_per_page, show_filter, show_sort, show_control_break, show_highlight, show_computation, show_aggregate, show_chart, show_notify, show_group_by, show_calendar, show_flashback, show_reset, show_download, show_help
from apex_040000.wwv_flow_worksheets
where flow_id=4000My main annoyance is the "Save Report Public" checkbox. The IR saved report list shouldn't be cluttered with all the report settings saved by all the workspace developers.

Please submit an official bug report to Adobe at:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Alexander.
Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

Orientation is not reporting in Develop Settings

I can't seem to read the orientation value in the develop settings - always comes up nil (most other settings reporting OK).
Rob

Thanks for your reply. I appreciate it
i think we r missing ' in the statement
select replace(msg, '<'<') msg from testmsg
so, i tried this
select replace(colname, '<''<') from tablename(updated too)
but its still the same. It is good in database, if i do export to csv , i am having the column value '<' included in it.example "abc<ggggg"
but in the report its displaying just "abc" .

AGPM Difference Report - Identify Changed Settings

I'm using AGPM 4 SP2 and I had a question about the difference report (against two versions of the same GPO) when there are settings that are changed. I can run the HTML report and I see the blue settings that are present in both version but with changed
settings but it doesn't show within each setting what changed.
For example I checked out the policy and change a user right assignment (Change the system time) by removing a group from it. I checked in the policy and ran a diff report and the "Change the system time" policy shows in blue but there is nothing
showing the setting as to what group I removed.
Is this by design or a bug? The blue changes seem pretty useless if it doesn't actually show what the difference in the setting is between the two version
Thanks!

Hi,
AGPM is a great tool for managing group policy, and Microsoft has a dedicated forum for AGPM, in order to get better and more professional help, it's suggested that we ask for suggestions in the following AGPM forum.
Microsoft Advanced Group Policy Management (AGPM)
http://social.technet.microsoft.com/Forums/en-US/home?forum=mdopagpm
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Report Print queue settings

Hi all,
I am changing some settings on my print queues. The snmp community names is one of them (for bi-di purposes).
I would to run a report/audit or simply display it somewhere.. on all print queues to show what community names they are configured with. this way I would able to check if changes have been applied to all or any has been forgotten.
Servers are 2k3 and 2k8 OS.
Thank you

You can use powershell to get a list of WMI print class objects, then loop through the list to get the port name, and determine the SNMP information. The WMI interface will only enumerate Standard TCP/IP ports. For any other port types
you would need to use the spooler API's
powershell link
http://technet.microsoft.com/en-us/library/dd347648.aspx
Alan Morris Windows Printing Team

Report Painter - Display settings of variations

Hi,
In my report CO, I have a characteristic which is displayed as a variation. It's a set variable, let's says a group of profit centers (a set of multiple single sets). When execute the report, the value list of variation is always expand-all. It's not quite user-friendly.
Do you know how to set the variation as by default collapse-all? I know that we can do it as I saw in some SAP sample reports. I tried various ways but still not found any useful.
Thank you for your quick response!

Hello Huong Le,
you can change the setting on the selection screen of the report - but you have to activate the 'expert mode' first: Environment -> Options -> Expert mode.
As soon as you have this activated, the button 'Variation' will show up where you can choose between 'Explode', 'Single Value' or 'Do not explode'.
Hope this is what you're looking for.
Have a nice day!
Regards,
Irene Baldassari

XL report error - Security settings of MS Excel prohibiting XL reports to o

Hi All,
I am getting above error while trying to open the Excise report with XL reporter.
I am using SAP B1 2007 and MS excel 2007.
Can anybody help ?
Anuj Singh

Dear Anuj,
I do have few suggestions for you.
+Firstly, I would like to kindly request you to run only one version of .Net in your server, and that should be .NET 1.1.
This is a problem in .NET 2.0. The reason is that there is a "shim
database" in the registry that the runtime reads to determine if an
application that is about to load the runtime via COM interop really
needs an earlier vesion instead. XL Reporter uses .NET 1.1 to run.
Please refer to the Note 918188 for more details.
+ Also Do you define too many groups or expandings in the report? It also
may cause the problem. Please kindly make a simple report definition
to see if the problem persists.
Hope this will be helpful, and for .NET, I would strongly recommend
uninstallation of all, then set up of 1.1 then reinstallation of client
XLR - this may be cumbersome, but it will clear registry files of the
other existing versions.
Regards,
Gagan Thareja
SAP Business One Forums Team

Report Viewer - SSRS settings/parameters and List Viewer

Hello
I have 2 questions. Using SharePoint 2010, data are stored in SQL 2012
1. SSRS Report Viewer - is there a way to display parameter panel with the question on the top of the web part or left side (it shows on the right side)? Can't seem to find that setting, but seen some samples of the reports that show parameters drop
down on top of the Viewer.
2. Using List View Web part to display the items from the external content (sql), but can't seem to find a way to select the record without going into details for this record. In other words - I'd like to display a table with few records, have an ability
to select the record and pass the ID as a parameter to the report, but also give a user ability to view details of each record. Is there a way to add the radio button or something like that next to each record?
Thank you!
Alla Sanders

Hello,
This is the answer for 1. This is the way I did it. So, use content editor webpart. Add this script to the webpart. Script shows a label and a dropdown list and attach a javascript function to onchange event of dropdown list. Onchange event creates the dynamic
report url and open that report url in new browser window.
<span>Report parameter one : </span>
<select onchange="loadreport(this.selectedIndex); id="cars">
<option value="volvo">Volvo</option>
<option value="saab">Saab</option>
<option value="mercedes">Mercedes</option>
<option value="audi">Audi</option>
</select>
<script type="text/javascript">
function loadreport(index) {
var ddcars = document.getElementById("cars");
var carname = ddcars.options[index].value;
var rpt = "http://yourserver.com/MA/SIP/_layouts/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl=/MA/SIP/SC_Reports/Location_Reports/YourReportName.rdl&DefaultItemOpen=1&rv:HeaderArea=None&rv:DocMapMode=Collapsed&rv:toolbaritemsdisplaymode=152&rp:CarName=" + carname + "&rv:ParamMode=Collapsed" ;
window.open(rpt);
</script>
Hope this can help!
Thanks!

Cisco Secure ACS 5.4/Monitoring and Report Viewer - SNMP Settings

Hello Everyone.
I hope this is the right forum for my question.
We just purchased 8 1121 ACS 5.4 appliances. I have some familiarity with the older 1113 and 1120 appliances running ACS 4.2. So I have a lot to learn.
Right now I'm trying to understand the Monitoring and Report Viewer System Configuration. I set the SNMP V2 read comm. string to the same string I configured from the CLI.
etc-labacsb1-1/admin# show runn | inc snmp
snmp-server contact "ACS1121;XXXXX"
snmp-server location "B1 Lab"
snmp-server community XXXXXX ro
1) It was not the same string as configured on CLI. Does setting this give me access to query more than system type or server type MIB objects.
2) Can you provide an example? (for example to query a switch - snmpwalk -v 1 -c XXXXXX hostname 1.3.6.1.4.1.9.9.43)
3) What is the MIB object tree OID (1.3.6.1.4.1.9.???) for these ACS appliances?
Thanks in advance.
Ray Westphal
EHI

that's correct. here is what we have in ACS 5.4 for snmp.
ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
•SNMPv2-MIB
•RFC1213-MIB (MIB II)
•IF-MIB
•IP-MIB
•TCP-MIB
•UDP-MIB
•CISCO-CDP-MIB
•ENTITY-MIB
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
~BR
Jatin Katyal
**Do rate helpful posts**

Reporting glitch in Settings...

Similar Messages

Maybe you are looking for