Reports Converter Utility in 10g

can we install only reports converter utility 10g on a machine for reports complining purpose insted of complete reports and forms installation.

not possible.

Similar Messages

Oracle report from 6i to 10g

hi all,
We try to move oracle report from 6i to 10g. however we found that the report's record ordering is different.
The case is that, the record in report is ordered according to the attribute "break order".
There is no "order by" in sql".
It runs without problems in 6i, but in 10g , the ordering of the record has no ordering.
Please help to solve the problems or give some advice. Thanks.

Break order property only works for ordering in break groups. For other groups (like the lowest level group) you have to use order by in your SQL.
That was also the case in 6i, so you may just have been lucky that it worked at all.
This is from the Help:
The Break Order property is the order in which to display the column's values. This property applies only to columns that identify distinct values of user-created groups (i.e., break groups ). The order of column values in a default group is determined by the ORDER BY clause of the query for SQL queries

Migrate reports from 6i to 10g

Hello friends,
I want to migrate reports created in oracle 6i report builder
to
oracle 10g.
Please give me steps for that.
Arvind2

It happens on all machine. We use browser to launch the application and the report is called from forms (10.1.2). We didn't change any code in report and neither the fonts (Tahoma). In 6i, client server environment, windows can find the font. I guess in 10g web environment, the font is not as default. HP Laserjet 8000N is a network printer which I use to testing my report. everything is fine in 6i but not 10g. Here is my question.
1. How to check printer setup? Should I use the default font from Linux instead of Tahoma?
2. I found a note in metalink, Note:356221.1 which explains the procedures to deploy reports from windows to Linux. I am not sure my problem is related to the font or something else...
Thanks for you reponse.

Migrate report template 6i to 10g

Hi All
I am working on Oracle Report 10g.
but in my company I have one old template which was made in 6i.
i have question that how to Migrate report template 6i to 10g?
i have read in forum that i just have to compile template into 10g report. is that right answer or not i just want to make sure.
Thanks In advanced for your Answer.

The easiest way to find out is to just give it a try. ;-)

Urgent: Calling Reports from Oracle Forms 10g (10.1.2.0.2) fails

Problem displaying a report from within Oracle 10g forms.
After a lot of work, we are able to access and actually display a report directly from Internet explorer and view the report from the report server as well.
The successful url was:
http://york.vrc.virginia.gov:7778/reports/rwservlet
?report=/u01/app/oracle/produ ct/vrcmidtier/reports/vrc/pmw41051.rdf
&userid=vrcpr/vrcpr@vrctest&destype=cache&desformat=HTML
The form displays correctly back to the screen
When executing from within the form, however, the report runs but does not display back to the screen.
Forms Steps so far:
created a report object called pmw41050
static parameters are:
file name: /u01/app/oracle/product/vrcmidtier/reports/vrc/pmw41051.rdfination format
execution mode: batch
communication mode: synchronous
destination name; null
destination format: HTML
reportserver:: vrc_york_midtier
Built a when button pressed trigger as follows:
declare
l_report_file varchar2(200);
l_report_id REPORT_OBJECT;
l_report_status varchar2(200);
begin
-- capture the report
l_report_file := 'pmw41051';
l_report_id := find_report_object(l_report_file);
-- set the parameters for this output
set_report_object_property(l_report_id, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property(l_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(l_report_id, REPORT_DESTYPE, CACHE);
set_report_object_property(l_report_id, REPORT_DESFORMAT, 'PDF');
set_report_object_property(l_report_id, REPORT_SERVER, 'rep_york_vrcmidtier');
set_report_object_property(l_report_id, REPORT_OTHER, 'PARAMFORM=NO');
set_report_object_property(l_report_id, REPORT_DESNAME, 'DESNAME');
-- and run the report
l_report_status := run_report_object(l_report_id);
-- monitor progress
while l_report_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
l_report_status := report_object_status(l_report_status);
end loop;
message('back from the report'); -- test message for return
end;
The report executes without error (as indicated by the message on the last line) but does NOT display back to the screen
checking the rwservlet/showjobs verifies the report completed and the reportcan be displayed from there.
So, bottom line: how to make a 10g form call report and display it on the screen?

Thanks MIke for your feedback...
Will this surfice?
Procedure Test_Report Is
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

How to call Reports in oracle forms 10g

Dear All,
How to call Reports in oracle forms 10g.
I am using Oracle Forms 10g Reports 10g and Database 10 and and Operating system Windows XP.
Please give me the Solution.
Thanks and Regards,
Faziludeen

Hi Omkar,
Please check the following code.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:POLICY.POLICY_NO));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('POL_REP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||'LENOVO-428E9E41'||'8889'||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=prod_report_server&P_parameter='||:POLICY.POLICY_NO||
'&paramform=no');
END;
I am used to Start the Report sever   'Rwserver Server=prod_Report_Server Start'
OracleAS Report Services
Version :-   10.1.2.0.2
Name    :-   prod_report_server
Status :-   Server is Shutting down
Jobs in Queue 0
Active Engines 0
I got the Following Error when I trying to run the Report
FRM-41211: Integration error:SSL failure running another product
Thanks and Regards,
Faziludeen

Reports Graphics and OAS 10g

I made a report with a pie char in developer 10g, it runs OK and i see the char in my desktop. When I execute the report (.rep) in OAS 10g (Forms a Reports Services) via the rwservlet, the resulting PDF file contains everything but the chart doesn't appears (white page). Is there any kind of configuration I need to adjust?

Hi,
This is strange. There is no additional configuration needed for charts. If your reports are running fine, it means you should be able to get charts in the output. Does the same problem reproduce if you change the output format from PDF to HTML or HTMLCSS?
Navneet.

Problem in converting util date format to sql date format

im trying to convert util date to sql date...i'm getting the error msg as
Error is : java.lang.NullPointerException
Error Message : null
i'm not bale to track the result...whatz the problem with this code?
This fromDate value will be dynamically built, value will be
fromDate="Tue Jul 15 00:00:00 IST 2003";
java.util.Date xx=util.stringToDate(fromDate);
java.sql.Date sqlD=null;
sqlD.setTime(xx.getTime());
System.out.println("sqld"+sqlD);

I try this and it works:
SimpleDateFormat simpledateformat = new SimpleDateFormat("EEE MMM dd HH:mm:ss z yyyy", Locale.UK);
String s = "Tue Jul 15 00:00:00 IST 2003";
java.util.Date date = simpledateformat.parse(s);
java.sql.Date sqlD=new java.sql.Date(date.getTime());
System.out.println("sqld"+sqlD);
Hope this helps.

Registering Report Writer in Portal 10g

Portal 10g AS software is fairly new and not a lot of books are available for it.
I am looking for a guide or proper steps to registering the Oracle Report Server with Portal 10g.
I have looked at this doc: http://download-uk.oracle.com/docs/html/B14048_01/pbr_portal.htm#i1007990
and the value for "Oracle Reports Web Gateway URL for RDF reports" provided in the doc does not seem to work. Thanks for assistance.

Or the portal forum at:
Oracle Application Server Portal
Regards,
Kavitha

Custom Reports Server Issue (upgrading 10g to Weblogic 11g)

I am having an issue with "Anonymous' user showing up when I go into the console of the Weblogic server to see all the report requests. In 10g (which we are upgrading from), I have report requests that I do a Preview from within Oracle Forms. When I do the RUN_REPORT_OBJECT/SHOW.WEB_DOCUMENT, it captures the User account and put it in the console with that username. On 11.1.1.4, using same form/report, it doesn't capture the username. If I call the reports server from the database, it does work fine.
Anyone have any ideas if there's something I have to do in Oracle Forms to put that username in or if it's a setting on the Custom Reports Server that i need to set so that it captures the name from the Oracle Forms session.

Hi A. Drieux,
Thanks for the reply. i have some questions on ODI.
Now we are using hyperion 11.1.1.3 with ODI 10.1.3. We are upgrading hyperion version 11.1.1.3 to 11.1.2.2.
Is it possible, to use the same ODI 10.1.3 version to upgrade version(hyperion 11.1.2.2) also?
Reply would be appreciated.
Thanks,
mady

Convert util.Date to sql.Date with time being displayed!

Hi all,
I want to convert util.Date to sql.Date for passing the same to Database. (i donot want to use Timstamp, for some reasons)
java.sql.Date sqldate =
new java.sql.Date(new java.util.Date().getTime());
This simple code truncates the Time component and the result will be only Date. But my requirement is for Data and Time, both.
Request anyone to suggest how to go abt this problem.
Thanx.

You can use the class java.text.DateFormat (java.text.SimpleDateFormat) for displaying. For example like this.
java.sql.Date sqldate = new java.sql.Date(new java.util.Date().getTime());
java.text.SimpleDateFormat formatter = new java.text.SimpleDateFormat("yyyy.MM.dd 'at' HH:mm:ss z");
String str = formatter.format(sqldate);
System.out.println(str);

How to connect Forms 6i & Reports 6i with oracle 10g R2?

Hey everybody,
I need your help in connecting both Forms 6i & Reports 6i with Oracle 10g Release 2 db, MS Access(2003, 2007) and SQL database(Microsoft Visual Studio 2008). I am a newbie. I have installed all of them on my HP notebook, with Windows 7 Ultimate(32 bit OS) installed. I want to generate forms & reports by accessing data from above mentioned databases. Please provide me with the configuration steps.
Thanks in advance...!

Welcome to the forum ;-)
Please be sure to review the following:
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
First, I think it would be a good idea if we can understand why you have chosen to use a nearly new operating system yet install Oracle products that are 10 years old (i.e. Forms/Reports 6i) on it. In general, this is not a good idea. Although running such an old version on Win7 can be made to work, the possibility of having problems is likely. If you are infact new to the product, using a configuration where you are likely to have problems may not be a good starting place. Also, you should be aware that Forms/Reports 6i was desupported several years ago. Documentation and other information is gradually being replaced by newer information, so resources for this old version are going away. The latest version of Forms/Reports is part of Fusion Middleware 11R2 (version 11.1.2.0) and requires WebLogic Server 10.3.5 (or 10.3.6) in order to be installed.
Second, if you decide to stick with F/R 6i, are you planning to run the applications you create in a browser or as a client/server application? This information is important because how you connect to a database will slightly differ depending on which option you choose. Also, if you want to connect to non-Oracle data sources you can use ODBC for client/server or Oracle Transparent Gateway. However, if you plan to deploy the applications using a browser, Gateway is your only option for connecting to non-Oracle datasources. As for connecting to MS Access, I believe ODBC is your only option, so web deployment may not be an option.
http://docs.oracle.com/cd/B19306_01/gateways.102/b14270/ch1.htm
There are many other references available. Try a Google search.
As for connecting to an Oracle database, this is generally easy. For the Builder(s) and client/server runtime to connect, add the db information to the tnsnames.ora found in the Oracle Home (installation directory) \network\admin. If you are unfamiliar with what goes in the file you can copy the entries created for your database. The db will have a similar file found in a similar place in its installation directory (Oracle Home). For example, you might find something like this:
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = YOURSERVER.COM)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
)Simply copy this information to the end of your tnsnames.ora found where Forms/Reports is installed then restart any running Forms or Builders.

Converting Webutil from 10g to 6i.

hi,
I'm trying to convert webutil from 10g to 6i. Coz i need to give some facility of FTP.
i'm able to change all the packages. But few packages like JAVA*, are not able to compile. it is giving error, some JNI. How to resolve this?
Regards,
Subir

I will assume your application is deployed in a browser and not client/server in order to form my comments.
Rather than trying to get WebUtil working in 6i, it would probably be simpler to just do what WebUtil does and write your own java bean. You can use the WebUtil code as an example. The important thing to remember is that WebUtil was designed with JDK 1.3.1.x and Forms 6i is based on 1.2 and older therefore you cannot just simply copy the WebUtil code and expect it to compile.
If you have access to Metalink, here are two notes which explain how it can be done.
Metalink Article ID 117340.1 How to Display Images in Webforms from the Client PC (Uploading Files)
Metalink Article ID 116129.1 How to Upload and Save Data From/To a Local Client File Using Web Deployed Forms
Best suggestion..... upgrade! ;)

Reports Converter Utility in 10g

Similar Messages

Maybe you are looking for