Reports for standard Valuation class
Dear Sap Gurus,
I would like to know whether there is any standard reports for valuation class wise...? kindly let me know.Thank you.
Hi,
What do you want Valuation Class wise?
If you want Stock then refer MB5L - List of Stock Values : Balances
And if you want Material List then check MM60, but Valuation Class will be available in output screen not in selection screen.
Similar Messages
-
Analysis report for standard cost in CK33N
Hi,
Analysis report for standard cost
Using variant Z003 in CK11N.
Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
In CK33 you compare the 2011 cost for the product with the proposed cost for the next year. For some parts it works and for others it splits the lines, though the calculation is still correct.
Regards,
T.Harish KumarHi Revital,
I believe the last option is correct.
Thanks,
Gordon -
Multiple gl account for blank valuation class in OBYC
hello experts ,
In OBYC FOR VALUATION CLASS 'BLANK' i have maintained a account no which is for service group .
Now for material group also there are few materials in which valaution class is blank and when i do MIGO then these goes to that GL account which is maintained for fleet (service group).
also assigned my the 'grir clearing account ' in 'LMR1M002' and activated the customer exit but the gl account get changed and become the same which is maintained in OBYC for blank valaution class at end of that enhancement 'LMR1M002'.
how to assign two gl account for blank valuation class.one is for service group and other is for material group .
regards
ranjan
Edited by: Ranjan 25 on Oct 28, 2011 9:34 AMHi
This is normal Phenomenon since under that material type you must be having other valuation classes other than SUPP, and you must have assigned lot other G/L accounts , i.e for G/L recon you need to consider lot of Inventory accounts. Now if you change, during the next recon you just have to add the old entry details along with the new G/L account. No issues at all other than informing and co-ordination with FI guys after you new assignment of the G/L acct for SUPP.
Best Regards -
Change GL account for the valuation class
Hi,
Currently I have a valuation class SUPP which is assign to GL account 14800, now the customer have the request to change it to GL account 14100. There is an option to change it in Config OBYC, but there are a lot of materials involved and a lot of material cost that exist is booked under GL account 14800. Can I just change it OBYC, what's the impact?
Anyone experienced that before?
Thanks!Hi
This is normal Phenomenon since under that material type you must be having other valuation classes other than SUPP, and you must have assigned lot other G/L accounts , i.e for G/L recon you need to consider lot of Inventory accounts. Now if you change, during the next recon you just have to add the old entry details along with the new G/L account. No issues at all other than informing and co-ordination with FI guys after you new assignment of the G/L acct for SUPP.
Best Regards -
Why can't I create a report for standard price by material
Any ideas? All reporting I have tried in SQO1 and even in SE16 returns 0 value for standard prices?
Firstly why is this? and secondly is there another way I can pull a report by material showing standard price?
Points awarded, many thankshi,
In MM60, u can get report for materials having standard & moving average price based on ur input in selection screen like material,plant,material type,material group & created by only. As of my knowledge,
there is no option to get list of materials with standard price in std.SAP.
There are two options to generate report for materials with standard price.
1. It is better go for customization . selection screen must contains price control field. if u enter price control like 'S' or 'V' in intial screen , report is generated.
2. create a ABAP query for this.
I hope this info is helpful to u. -
OBYC - BSX - Wrrong GL Assgine for a valuation class
DEAR FI GURUS n EXPERTS,
In OBYC, person assigned a wrong GL against a valuation class. Now we want to change that assignment.
On testing server I test the scenario and found the effect is not going on to past entries. IS THERE ANY PROGRAM WHICH I HAVE TO RUN TO CARRIED OUT THE EFFECT IN PAST ENTRIES. (Posting in right GL).
Please suggest.
With thanks,
DSCDear All,
Thanks for your prompt replies,
The scenario is such type: Material Group = Plant and machinery and valuation class = 1023 for this material type. Now in OBYC, unde BSX, there should be GL of Plant and machinery in front of valuation Class 1023.
But, some one wrongly entered GL of Spares. So, all the entries were posted in Spare.
Now, we want to get back all those entries in the GL of Plant and machinery.
If we change the GL than new entries will go in right GL. But what to do for old entries.
Please suggest n help.
DSC -
Report for historic valuation of material-MBEW and MBEWH
Hello,
Our client needs a report that shows the value of stock of past period, the medium price during last exercises. Actually they have a Z report that show all this data, considering the data on MBEWH. The problem is that MBEWH only is updated if there is a price change (for example MR21) or a goods receipt. This table only will be changed when in the comiing month a material have any movement of stock.
My question, if we catch the values LFGJA and LFMON OF MBEW table we consider the last change of price, and the key for entering to MBEWH table to get the past values.
I have checked too, the MC.9 transaction. Looks like fine too, but if we can develop a program for accessing to the S039 table, this table is transparent table and we can not get any data. The data is providing from S032 table, and I have seen, that this table sometimes contains insconsistency values or negative values.
Is there another transaction to get our client's requeriments???
ThanksHi Ravikumar,
Hope you are an ABAPer. If not also, you can achieve this through an ABAPer. As mentioned by others, you need to check whether your requirement is met by the standard transaction MB5B. You need to check whether this transaction gives you the exact opening and closing balance for a material. If this gives what you want, then you need to make some small enhancement in the MB5B report program so that you will be getting the result of the opening and closing stock. In this enhancement you will use EXPORT to export the result to your program where you can IMPORT it. This procedure is explained in detail in a document created in SCN dated 30th November, 2012 by Sijin Siji. Have a look in that.
That document is descriptive and it will be helping you in solving this issue. If you have any doubts, please revert back.
Regards,
Abijith -
Report for standard price of a material -
Hi ,
Could you please tell me the report, which gives the standard price/moving average price of material(s).
Thanks
ChandraHi,
Go to MBEW table..
SE16 enter table MBEW
in the main screen
go to Settings> Field selection in that select fields
VMVER Moving price
VMSTP Standard price
and execute...
Thx
Raju
Edited by: Manohar Raju on Mar 14, 2008 1:49 PM -
Hi !
Is there a SAP delivered report that lists all material numbers and the value for each material's present inventory value?
Thanks,
AnishaThere are several. Here are a few:
MB5W - List of Stock Values
MB5L - List of Stock Values: Balances
MC48 - INVCO: Analysis of Current Stock Values
Regards -
Valuation class wise stock report for opening and closing stock
Dear all,
My Clint is asking the report for the opening stock and closing stock with respect to valuation class is there any standard report is available please guide me
regards
pramodDear sir,
in my case matarial is split valuated matarial, matarial is maintained with two valuation classes
when seeing the report MB5B its not showing the price valuation class vise, its showing combined together only, again i am using the MC.9 there also same problem its not showing both the valuation class vise price its showing only one valuation class price, if we check for another valuation class price for that particular matarial its telling no data is availabel for the valuation class
regards
pramod -
Standard Vs Actual Cost report for Production Order
Hi Expert,
I have an requirement that i need report for Standard Cost (CK40N) and Actual cost (261 Movement) for multiple production order or Multiple Material.
Please suggest standard report if available or FS for creating Z Report.
Regards,
PranavHi Pranav
There are Standard reports
Option 1
You can use Product Drilldown reports in KKO0
For this:-
a. Do settings in OKN0 - assign a Cost Comp Structure and Choose Material group = Product Group
b. Run KKRV to collect data and then use KKO0 reports
I have replied this in SCN many times.. You can search here. Just google as "SCN" "Ajay Maheshwari" "OKN0" and you can see some posts answered by me
Option 2
You can use Summarization Hierarchy KKBC_HOE
For this
a. Set up Summ Hierarchy in KKR0.
b. Run KKRC
c. Run KKBC_HOE report
Br Ajay M -
Account Determination for Valuation Class
In trying to cancel a confirmation made for a warehouse item, I hit the error that the Account Determination ___ ___ for the Valuation Class Y358 is not possible. Can someone please help me refresh my memory as to which table the valuation class for inventory G/L account is located?
Thanks in advance,
ScottGo to OBYC and look for the e.g. GBB
double click on the object and here you will see that the account does not exist for the valuation class you see in the error
if you maintain this entery and then try to post the documnet
make sure once oyu maintain this entry then you have to come out from your GR document and then restart again for Posting -
Currency problem in BAPI_MATERIAL_SAVEDATA while uploading valuation class
Hello Experts,
I am uploading valuation class using BAPI_MATERIAL_SAVEDATA.
While uploading it is showing runtime error "Unable to interpret KG as a number".
I have used the FM CONVERSION_EXIT_CUNIT_INPUT to convert the UOM from the file to Field symbol.
still the same. please guide me.
I have pasted my code below.
Kindly go through and help would be highly appreciated.
*& Report ZPRI_MAT_PRICE_UPLOAD
REPORT ZPRI_MAT_PRICE_UPLOAD no standard page heading line-size 150.
tables : mbew, " Material valuation
makt, " Material description
mara. " General material master
data : begin of t_matvclass occurs 0,
material type matnr, " Material
ind_sec type mbrsh, " Industry sector
mat_typ type mtart, " Material type
val_class type BKLAS, " Valuation class
MOV_PR TYPE VERPR, " MOVING PRISE
STD_PR TYPE STPRS, " STANDARD PRISE
base_uom like mara-meins, " Material unit
mat_desc type maktx, " Material description - MAKTX
plant type werks, " Plant
langu(2),
end of t_matvclass.
data : wa like line of t_matvclass.
data: begin of it_makt occurs 0.
include structure bapi_makt.
data end of it_makt.
data :bapi_head like bapimathead, " Header Segment with Control Info
bapi_clientdata like bapi_mara, " Material Data at Client Level
bapi_clientdatax like bapi_marax, "Checkbox Structure
bapi_valclass like BAPI_MBEW, " Valuation class
bapi_valclassx like BAPI_MBEWX, " Checkbox Structure
* BAPI_MOVING_PR LIKE BAPI_MBEW, "MOVING PRISE
* BAPI_MOVING_PRX LIKE BAPI_MBEWX, "MOVING PRISE
* BAPI_STD_PRISE LIKE BAPI_MBEW, "STANDARD PRISE
* BAPI_STD_PRISEX LIKE BAPI_MBEWX, "STANDARD PRISE
bapi_return like bapiret2, " Bapi return structrue
returnm type table of bapi_matreturn2 with header line.
data : it_excel type alsmex_tabline occurs 0 with header line.
data: begin of it_ret occurs 0.
include structure bapiret2.
data end of it_ret.
* Data objects for exception handling.
data : lv_converr type ref to CX_SY_CONVERSION_ERROR,
lv_dynerr type ref to CX_SY_DYN_CALL_ERROR.
data : txt_converr type string,
txt_converr_l type string,
txt_dynerr type string,
txt_dynerr_l type string.
data : char_uom(4) type c. " Global UOM after conversion
* Declaring selection screen for selecting a data file
* for uploading valuation class
selection-screen begin of block b1 with frame title text-001.
parameter : file_nam type rlgrap-filename obligatory default
'C:\master data UPDATED_test.xls'.
parameter : p_begcol type i default 1, " no-display,
p_begrow type i default 2, " no-display,
p_endcol type i default 9, " no-display,
p_endrow type i default 267. " no-display.
*parameters: p_valare type mbew-bwkey obligatory. " Valuation area
selection-screen end of block b1.
at selection-screen on value-request for file_nam.
perform F_get_file using file_nam.
start-of-selection.
perform F_xls_itab using file_nam changing it_excel.
perform F_move_data.
*perform F_get_data.
perform F_Display_data.
*& Form F_xls_itab
* text
* -->P_FILE_NAM text
* <--P_IT_EXCEL text
form F_xls_itab using p_file_nam changing p_it_excel.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file_nam
i_begin_col = p_begcol
i_begin_row = p_begrow
i_end_col = p_endcol
i_end_row = p_endrow
tables
intern = it_excel
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
endform. " F_xls_itab
*& Form F_get_file
* Subroutine to get the file on F4
* -->P_FILE_NAM text
form F_get_file using p_file_nam.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
* FIELD_NAME = ' '
* STATIC = ' '
* MASK = ' '
CHANGING
file_name = file_nam
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
endform. " F_get_file
*& Form F_Display_data
* text
* --> p1 text
* <-- p2 text
form F_Display_data .
skip 2.
*write:/2 'Valuation area :', p_valare.
*write:/2 'Standard price :', p_stdprc.
skip 2.
write:/29 sy-uline(120).
write:/29 sy-vline,
30 'Material' color 1, " Material - MATNR
50 sy-vline, 'Ind_sector' color 1, " Industry sector - MBRSH
62 sy-vline, 'Mat_typ' color 1, " Material type - MTART
75 sy-vline, 'Valuation class' color 1, " Valuation class
85 sy-vline, 'Base UOM' color 1, " Base UOM
95 sy-vline, 'Material Decp' color 1, " Material descp
120 sy-vline, 'Mov Price', " Moving price
130 sy-vline, 'Std Price', " Standard price
140 sy-vline, 'Plant', " Plant
150 sy-vline.
write:/29 sy-uline(120).
loop at t_matvclass into wa.
write:/29 sy-vline,
30 wa-material color 2, " Material - MATNR
50 sy-vline,
55 wa-ind_sec color 2 right-justified, " Industry sector
62 sy-vline,
66 wa-mat_typ color 2, " Material type - MTART
75 sy-vline,
78 wa-val_class color 2 right-justified, " Valuation class
85 sy-vline,
88 wa-base_uom color 2 right-justified, " Base UOM
95 sy-vline,
98 wa-mat_desc color 2 left-justified, " Material Desc
120 sy-vline, wa-MOV_PR, " Standard price
130 sy-vline, wa-STD_PR, " Moving price
140 sy-vline, wa-plant, " Plant
150 sy-vline.
endloop.
write:/29 sy-uline(64).
endform. " F_Display_data
*& Form F_move_data
* Subroutine to move data from excel to internal table
* --> p1 text
* <-- p2 text
form F_move_data .
data : lv_index type i.
field-symbols <fs>.
* Sorting the internal table
sort it_excel by row col.
clear it_excel.
loop at it_excel.
move it_excel-col to lv_index.
* Assigning each record to the internal table row.
assign component lv_index of structure wa to <fs>.
* Assigning the field value to a field symbol
if lv_index eq 5.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
EXPORTING
INPUT = it_excel-value
LANGUAGE = SY-LANGU
IMPORTING
OUTPUT = char_uom.
** Moving the converted UOM to field symbol
move char_uom to <fs>.
else.
move it_excel-value to <fs>.
endif.
at end of row.
append wa to t_matvclass.
clear wa.
endat.
endloop.
endform. " F_move_data
*& Form F_get_data
* text
* --> p1 text
* <-- p2 text
form F_get_data .
loop at t_matvclass into wa.
try.
* BAPIHEAD --- > Header Segment with Control Information
bapi_head-material = wa-material.
bapi_head-ind_sector = wa-ind_sec.
bapi_head-matl_type = wa-mat_typ.
bapi_head-account_view = 'X'.
* For Clien Data
bapi_clientdata-BASE_UOM = wa-base_uom.
bapi_clientdatax-base_uom = 'X'.
bapi_clientdatax-base_uom_iso = 'X'.
* For Valuation Class.
bapi_valclass-val_area = wa-plant.
bapi_valclass-val_class = wa-val_class.
bapi_valclass-std_price = wa-STD_PR.
bapi_valclass-MOVING_PR = wa-MOV_PR.
* For Valuation Class control checkbox.
bapi_valclassx-val_area = wa-plant.
bapi_valclassx-val_class = 'X'.
bapi_valclassx-std_price = 'X'.
bapi_valclass-MOVING_PR = 'X'.
refresh it_makt.
wa-langu = SY-LANGU.
it_makt-langu = wa-langu.
it_makt-matl_desc = wa-mat_desc.
append it_makt.
clear it_ret.
refresh it_ret.
if t_matvclass[] is initial.
write:/ 'Cannot be updated'.
else.
perform F_call_bapi.
endif.
catch CX_SY_CONVERSION_ERROR into lv_converr.
txt_converr = lv_converr->get_text( ).
txt_converr_l = lv_converr->get_longtext( ).
write:/ 'Error:', txt_converr color 5.
write:/ 'Error:', txt_converr_l color 3.
endtry.
endloop.
endform. " F_get_data
*& Form F_bapi_commit
* text
* --> p1 text
* <-- p2 text
form F_bapi_commit.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
if sy-subrc eq 0.
write:/2 ' Transaction commited' color 4.
else.
write:/2 'Unable to commit the transaction' color 4.
endif.
endform. " F_bapi_commit
*& Form F_call_bapi
* text
* --> p1 text
* <-- p2 text
form F_call_bapi .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = bapi_head
CLIENTDATA = bapi_clientdata
CLIENTDATAX = bapi_clientdatax
VALUATIONDATA = bapi_valclass
VALUATIONDATAX = bapi_valclassx
IMPORTING
RETURN = it_ret
TABLES
MATERIALDESCRIPTION = it_makt
RETURNMESSAGES = returnm.
IF it_ret-type eq 'E' or it_ret-TYPE eq 'S'.
Write:/1 it_ret-type,
8 it_ret-id,
30 it_ret-number,
38 it_ret-message,
190 it_ret-parameter,
210 it_ret-row,
220 it_ret-field.
endif.
endform. " F_call_bapi
Regards,
Ranjith Nresloved.
issue with the internal table structrue. -
Hi,
i had created a G/L account with reference to an account linked to valuation class, but i have a doubt how to identify that this account is for this material as there is no link between valuation class an G/L account.
regards.
venkat.Configure Automatic Postings
In this step, you enter the system settings for Inventory Management and Invoice Verification transactions for automatic postings to G/L accounts.
You can then check your settings using a simulation function.
Under Further information there is a list of transactions in Materials Management and their definitions.
What are automatic postings?
Postings are made to G/L accounts automatically in the case of Invoice Verification and Inventory Management transactions relevant to Financial and Cost Accounting.
Example:
Posting lines are created in the following accounts in the case of a goods issue for a cost center:
Stock account
Consumption account
How does the system find the relevant accounts?
When entering the goods movement, the user does not have to enter a G/L account, since the R/3 System automatically finds the accounts to which postings are to be made using the following data:
Chart of accounts of the company code
If the user enters a company code or a plant when entering a transaction, the R/3 System determines the chart of accounts which is valid for the company code.
You must define the automatic account determination individually for each chart of accounts.
You must define the automatic account determination individually for each chart of accounts.
Valuation grouping code of the valuation area
If the automatic account determination within a chart of accounts is to run differently for certain company codes or plants (valuation areas), assign different valuation grouping codes to these valuation areas.
You must define the automatic account determination individually for every valuation grouping code within a chart of accounts. It applies to all valuation areas which are assigned to this valuation grouping code.
If the user enters a company code or a plant when entering a transaction, the system determines the valuation area and the valuation grouping code.
Transaction/event key (internal processing key)
Posting transactions are predefined for those inventory management and invoice verification transactions relevant to accounting. Posting records, which are generalized in the value string, are assigned to each relevant movement type in inventory management and each transaction in invoice verification. These contain keys for the relevant posting transaction (for example, inventory posting and consumption posting) instead of actual G/L account numbers.
You do not have to define these transaction keys, they are determined automatically from the transaction (invoice verification) or the movement type (inventory management). All you have to do is assign the relevant G/L account to each posting transaction.
Account grouping (only for offsetting entries, consignment liabilities, and price differences)
Since the posting transaction "Offsetting entry for inventory posting" is used for different transactions (for example, goods issue, scrapping, physical inventory), which are assigned to different accounts (for example, consumption account, scrapping, expense/income from inventory differences), it is necessary to divide the posting transaction according to a further key: account grouping code.
An account grouping is assigned to each movement type in inventory management which uses the posting transaction "Offsetting entry for inventory posting".
Under the posting transaction "Offsetting entry for inventory posting", you must assign G/L accounts for every account grouping, that is, assign G/L accounts.
If you wish to post price differences to different price difference accounts in the case of goods receipts for purchase orders, goods receipts for orders, or other movements, you can define different account grouping codes for the transaction key.
Using the account grouping, you can also have different accounts for consignment liabilities and pipeline liabilities.
Valuation class of material or (in case of split valuation) the valuation type
The valuation class allows you to define automatic account determination that is dependent on the material. for example: you post a goods receipt of a raw material to a different stock account than if the goods receipt were for trading goods, even though the user enters the same transaction for both materials.
You can achieve this by assigning different valuation classes to the materials and by assigning different G/L accounts to the posting transaction for every valuation class.
If you do not want to differentiate according to valuation classes you do not have to maintain a valuation class for a transaction.
Requirements
Requirements
Before you maintain automatic postings, you must obtain the following information:
1. Valuation level ( plant or company code)
Establish whether the materials are valuated at plant or at company code level
When valuation is at plant level, the valuation area corresponds to a plant.
When valuation is at company code level, the valuation area corresponds to a company code.
Define valuation level
2. Chart of accounts and valuation grouping code per valuation area
Find out whether the valuation grouping code is active.
Activate split valuation
If it is not active, determine the chart of accounts assigned to each valuation area (via the company code).
If it is active, determine the chart of accounts and the valuation grouping code assigned to each valuation area.
Group valuation areas
You must define a separate account determination process for chart of accounts and each valuation grouping code.
. Valuation class per material type
If you wish to differentiate the account determination process for specific transactions according to valuation classes, find out which valuation classes are possible for each material type.
Define valuation classes
4. Account grouping for offsetting entries to stock accounts
Under Define account grouping for movement types, determine for which movement types an account grouping is defined for the transaction/event keys GGB (offsetting entry to stock posting), KON (consignment liabilities) and PRD (price differences).
Default settings
G/L account assignments for the charts of accounts INT and the valuation grouping code 0001 are SAP standard.
Activities
1. Create account keys for each chart of accounts and each valuation grouping code for the individual posting transactions. To do so, proceed as follows:
a) Call up the activity Configure Automatic Postings.
The R/3 system first checks whether the valuation areas are correctly maintained. If, for example, a plant is not assigned to a company code, a dialog box and an error message appear.
From this box, choose Continue (next entry) to continue the check.
Choose Cancel to end the check.
Choose Cancel to end the check.
The configuration menu Automatic postings appears.
b) Choose Goto -> Account assignment.
A list of posting transactions in Materials Management appears. For further details of the individual transactions, see Further information.
The Account determination indicator shows whether automatic account determination is defined for a transaction.
c) Choose a posting transaction.
A box appears for the first posting transaction. Here you can enter a chart of accounts.
You can enter the following data for each transaction:
Rules for account number assignments
With Goto -> Rules you can enter the factors on which the account number assignments depend:
- debit/credit indicator
- general grouping (= account grouping)
- valuation grouping
- valuation class
Posting keys for the posting lines
Normally you do not have to change the posting keys. If you wish to use new posting keys, you have to define them in the Customizing system of Financial Accounting
Account number assignments
You must assign G/L accounts for each transaction/event key (except KBS). You can assign these accounts manually or copy them from another chart of accounts via Edit -> Copy.
If you want to differentiate posting transactions (e.g. inventory postings) according to valuation classes, you must make an account assignment for each valuation class.
Using the posting transaction "Offsetting entry for inventory posting", you have to make an account assignment for each account grouping
If the transaction PRD (price differences) is also dependent on the account grouping, you must create three account assignments:
- an account assignment without account grouping
- an account assignment with account grouping PRF
- an account assignment with account grouping PRA
If the transaction KON (consignment and pipeline liabilities) is also dependent on the account grouping, you must create two account assignments:
- an account assignment without account grouping (consignment)
- an account assignment with account grouping (pipeline)
d) Save your settings.
2. Then check your settings with the
2. Then check your settings with the simulation function.
With the simulation function, you can simulate the following:
Inventory Management transactions
Invoice Verification transactions
When you enter a material or valuation class, the R/3 system determines the G/L accounts which are assigned to the corresponding posting transactions. Depending on the configuration, the SAP system checks whether the G/L account exists
In the simulation you can compare the field selection of the movement type with that of the individual accounts and make any corrections.
If you want to print the simulation, choose Simulation -> Report.
To carry out the simulation, proceed as follows:
a) Choose Settings to check the simulation defaults for
- the application area (Invoice Verification or Inventory Management)
- the input mode (material or valuation class)
- account assignment
Instructions
b) Choose Goto -> Simulation.
The screen for entering simulation data appears.
c) Depending on the valuation level, enter a plant or a company code on the screen.
d) When you simulate Inventory Management transactions, goods movements are simulated. The R/3 system suggests the first movement type for simulation. If several movements are possible with this movement type, you can select a line.
When you simulate Invoice Verification transactions, a list
The screen for entering simulation data appears.
c) Depending on the valuation level, enter a plant or a company code on the screen.
d) When you simulate Inventory Management transactions, goods movements are simulated. The R/3 system suggests the first movement type for simulation. If several movements are possible with this movement type, you can select a line.
When you simulate Invoice Verification transactions, a list appears on the screen of the possible transaction types. Select a line.
e) Then choose Goto -> Account assignments.
A list appears of the posting lines which can be created by the selected transaction. For each posting line, the G/L account for the debit posting as well as the G/L account for the credit posting are displayed.
f) From this screen, choose Goto -> Movement+ to get a list of the posting lines for the next movement type or transaction type.
If you work with valuation classes, choose Goto -> Valuation class+ to receive the simulation for the next valuation class. This function is not possible when simulating with material numbers.
Choose Goto -> Check screen layout to compare the movement type with the G/L accounts determined by the system and make any necessary corrections.
Note
The simulation function does NOT obviate the need for a trial posting! -
FI-MM(Valuation Class)
Hi,
Can any one please help me in explaining me what is valuation class ? and where configuration is done, i have some idea that Raw material, finished goods ext are called as valuation class and they are represented by numeric key. can any one provide proper notes on this valuation class and how is it helpful in FI-MM Integration.
thanks in advancevaluation classes are allowed for a material type.
If a user creates a material, he must enter the material's valuation class in the accounting data. The ERP system uses your default settings to check whether the valuation class is allowed for the material type.
The valuation class is a group of materials with the same account determination. If a transaction is to be posted to different accounts depending on the valuation class, create an account determination for each valuation class in the step Create automatic postings.
The valuation classes allowed depend on the material type. Several valuation classes are generally allowed for one material type. A valuation class can also be allowed for several material types.
The link between the valuation classes and the material types is set up via the account category reference.
The account category reference is a combination of valuation classes. Precisely one account category reference is assigned to a material type.
The following are the Requirements for Valuation class.
1) You must have defined your material types.
2) You must have defined the chart of accounts.
3) You must have agreed with Financial Accounting which materials are assigned to which accounts.
Default settings
In the standard SAP R/3 System, an account category reference is created for each material type. The account category reference is, in turn, assigned to precisely one valuation class. This means that each material type has its own valuation class.
Recommendation
We recommend that you create the account groups of your chart of accounts as an account category reference.
Example GKR:
3000 for raw materials
3030 for accessory materials
7900 for finished products
and so on
Activities
1. Create account category references under
account category reference
2. Under
valuation class
, define the valuation classes for each account category reference.
3. Under
Material type/account category reference
, assign an account category reference to each material type.
MENU PATH spro ->materials management->valuation and account assignment->account determination->account determination without wizard->Define valuation class.
Best regards
bhanuprakash.
Maybe you are looking for
-
HT4061 My passcode to open my phone is not working
I can't get my passcode to even open my phone to work and the SIM # on it is locked as well! I need help to get into my iPhone 3G it my even be a 3GS but I can't tell till I get my iPone unlocked.
-
Is there a way to automatically detect and delete duplicate photos in a library
I just imported a load of photos into my main iPhoto '11 Library from several older MAC's Photo Libraries. Despite repeatedly using the "Don't Import Duplicate Photos" dialogue box, I have many duplicate photos. Is there a way to automatically detect
-
Batch File to look at specific location in txt files
Is there a way to have at batch file look at a specific line and location from a text file and pull it for use in the batch file? For example, line 1 of sample.txt position ~15,8. I'm currently using the Find command(FIND /C "" *.TXT) but would like
-
SAP Query(SQ01) need to be transported
Hi All, I want to transport a tcode which is using SAP query. Now I am able to send the tcode to other system but when I go to SAP query under queries and standard query area I am not able to see the version management details. I also tried going to
-
How do I merge calenders in iCal?
I would like to merge several calenders in ical together. Can anyone help?