Reports for transf objects frm pa/om n vice verca

hi all,
please help me to know about Reports for transferring Objects from PA/OM and vice-versa
i mean pls also explain me how to run it and what all is to be done in that report.
please a detail answer would be highly appreciated
thanx n regards

HI
Use the below reports using Tcode SE38 or SA38
RHINTE00 u2013 Transfer PA Records To PD Positions. In another world, it creates the HRP1001 between P to S in the OM side of the world. When you view a record via IT0001, you see this person holds the position, however via HRP1001, that relationship isnu2019t so.
This loops through all employees in PA by looking at positions on infotype 0001. It checks the corresponding person to position relationship exists in PD (A008), if not it is created.
RHINTE10 u2013 Generates the required relevant tables. (T513 u2013 Jobs, T513S u2013 Jobs, T528B u2013 Positions, T528T u2013 Work Center, T527X u2013 Org Unit)
Generally, the program RHINTE20 will be used instead of this one. This program loops through the PD table HRP1000. For each job, position, work centre and organization unit, corresponding entry is created in the PA tables, which are shown above. Run this with evaluation path o_s_p, which runs through Org units, jobs and positions or find a suitable alternative if you wish to update work centers also. The main difference with this program as opposed to RHINTE20 is that this one has the option to delete items from the PA tables, which no longer exist in PD.
RHINTE20 u2013 checks for all objects for integration between PA and OM. This is a big one and will take awhile to run. What it does is look at table T513/T513T u2013 Jobs, T528/T528T u2013 Position, and T528X u2013 Org Unit. It will then compare it against the HRPxxxx table to find missing objects. If there are any missing objects, it will create the record.
This program loops through the PD table HRP1000. For each job, position, work centre and organization unit, corresponding entry is created in the PA tables, which are shown above. Run this with evaluation path o_s_p, which runs through Org units, jobs and positions or find a suitable alternative if you wish to update work centers also.
RHINTE30 u2013 Transfer OM to PA. This will create infotype 0001. If the conversion strategy is to have SAP auto inherit factor to kick in for IT0001, often time jobs and org unit are missing via IT0001 during the initial conversion load. RHINTE30 will find the relationship and push it through IT0001.
This will create an infotype 0001 record with correct entries for org unit, job, position and work centre by looking through the organization structure. It creates a batch job, which must be run via SM35.
RHINTE00 is to transfer data from PA to OM (not from OM to PA). For transferring data from OM to PA we use RHINTE30.
Regards
Ghouse

Similar Messages

Standard report for transfer

Dear All,
I have configured the action type 08 as Transfer (from one PA to another PA). Now my requirement is, I have to get transferred employees from PA to PA. Are they any standard report available to get this?
I have tried report RPLACTJ0 (Employee Action) but its giving only new PA, PSA, Org-unit, position (Transferred) but my requirement is i want get both. OLD PA. PSA as well as NEW PA PSA.
Should i do any further config for this in report RPLACTJ0???
are there any reports for this pls help me?
thanks for advance.
Regards,
Dinesh.

Hi Sikindar,
I did not try through Adhoc Query. actually im searching standard report for this.
Is it possible to take both PA's in Adhoc Query?If so, can u just give me an idea for that??
thanks
Dinesh.

How to combine Session Facade and Transfer object?

Hello All!
I'm working on an enterprise application. Presentation layer is a stand alone client, business logic is build on the Glassfish v2.1 and MySQL is used as a database. The client is connection to the GlassFishj server remotely using EJBs.
I have problems with business logic architecture.
Here is the brief description of backend application architecture design:
1. Session Facade pattern is used to simplify the client and application server interface and to provide application layers between backend (http://java.sun.com/blueprints/corej2eepatterns/Patterns/SessionFacade.html).
2.Transfer Object pattern to define update transfer objects strategy in order to decrease network overhead during client and application server interactions and to provide version control for objects. Transfer objects are designed as simple java business serializable objects. (http://java.sun.com/blueprints/corej2eepatterns/Patterns/TransferObject.html)
3. Originally the backend application consisted of three modules: users, storage and orders, but at the end I have decided to divide my application into the following parts - assortments, map, menu, orders, transactions, users.
4. All MySQL database transactions are via JDBC using procedures. No use of entity beans.
Questions:
1. I have some doubts about using Session Facade and Transfer object patterns at the same time. At first I'd mike to cite the definitions of the patters from the SUN official web site.
* Use a session bean as a facade to encapsulate the complexity of interactions between the business objects participating in a workflow. The Session Facade manages the business objects, and provides a uniform coarse-grained service access layer to clients.
* Use a Transfer Object to encapsulate the business data. A single method call is used to send and retrieve the Transfer Object. When the client requests the enterprise bean for the business data, the enterprise bean can construct the Transfer Object, populate it with its attribute values, and pass it by value to the client.
* So, if I use Transfer Object along with Session Facade, it makes some difficulties with object version control, because I 2 or
3 transfer objects controls with the 1 bean class. The best option for Transfer object Pattern is that each transfer object should have its own bean class to provide ability of object's version control. In the case it can bring the network overhead because of frequent remote calls caused by the large number of the bean classes.
* So, should I use the both patterns? If yes, how to manage the interaction the patterns. If no, which one to use.
2. E.g. I have a huge list of the Order objects and each Order object consists of other complicated objects. So, would I have trouble to transfer that list over network? If yes, how to manage it.
Thank you!
Astghik

Astghik wrote:
Hello All!
I'm working on an enterprise application. Presentation layer is a stand alone client, business logic is build on the Glassfish v2.1 and MySQL is used as a database. The client is connection to the GlassFishj server remotely using EJBs.
I have problems with business logic architecture.
Here is the brief description of backend application architecture design:
1. Session Facade pattern is used to simplify the client and application server interface and to provide application layers between backend (http://java.sun.com/blueprints/corej2eepatterns/Patterns/SessionFacade.html).
I would simply recommend establishing a service tier. Your services should be stateless. You can go the extra mile and have a session facade, but in the majority of cases, coding to an interface for your service accomplishes the same goals.
2.Transfer Object pattern to define update transfer objects strategy in order to decrease network overhead during client and application server interactions and to provide version control for objects. Transfer objects are designed as simple java business serializable objects. (http://java.sun.com/blueprints/corej2eepatterns/Patterns/TransferObject.html)
The idea of the transfer object is very similar to the Command pattern. I think if you investigate that pattern, it will be more obvious. The transfer object reduces network latency by consolidating all the parameters into an object, ideally, this also consolidates multiple method calls. If you combine a transfer object (or command object) with a service tier, you get the best of both worlds. The service can delegate calls to helper objects (or other services or components) using the data in the transfer / command object.
3. Originally the backend application consisted of three modules: users, storage and orders, but at the end I have decided to divide my application into the following parts - assortments, map, menu, orders, transactions, users.
The is your domain. It will vary from application to application. The principles above are more general (e.g., patterns and architectural tiers) and should apply to most domains. However, your actual use case may require something different.
4. All MySQL database transactions are via JDBC using procedures. No use of entity beans.
Consider using something like iBatis or Spring's JDBC templating to make your life easier with JDBC.
Questions:
1. I have some doubts about using Session Facade and Transfer object patterns at the same time. At first I'd mike to cite the definitions of the patters from the SUN official web site.
* Use a session bean as a facade to encapsulate the complexity of interactions between the business objects participating in a workflow. The Session Facade manages the business objects, and provides a uniform coarse-grained service access layer to clients.
* Use a Transfer Object to encapsulate the business data. A single method call is used to send and retrieve the Transfer Object. When the client requests the enterprise bean for the business data, the enterprise bean can construct the Transfer Object, populate it with its attribute values, and pass it by value to the client.
* So, if I use Transfer Object along with Session Facade, it makes some difficulties with object version control, because I 2 or
3 transfer objects controls with the 1 bean class. The best option for Transfer object Pattern is that each transfer object should have its own bean class to provide ability of object's version control. In the case it can bring the network overhead because of frequent remote calls caused by the large number of the bean classes.
* So, should I use the both patterns? If yes, how to manage the interaction the patterns. If no, which one to use.
Versioning is a separate issue. Generally, the more coarsely grained your transfer / command object is, the more changes are likely to impact dependent objects.
Your command or transfer object does not have to be a vanilla JavaBean, where you are basically creating a bean that has data from other objects. You can simply use your command / transfer object to encapsulate already existing domain objects. I see no need to map to a JavaBean with what you have described.
Generally, a method signature should be understandable. This means that many times it is better to pass the method, say, two coarsely grained objects than a signature with a dozen primitives. There are no hard and fast rules here. If you find a method signature getting large, consider a transfer / command object. If you want one service to delegate calls to a number of other services, you can also create a transfer / command object to furnish the controlling service with the data it needs to invoke the dependent services.
2. E.g. I have a huge list of the Order objects and each Order object consists of other complicated objects. So, would I have trouble to transfer that list over network? If yes, how to manage it.
This is a large, open-ended question. If you are going to display it to a user on a screen, I do not see how you avoid a network transfer with the data. The general answer is to not pass the data itself but rather a token (such as a primary key, or a primary key and a start and stop range such as you see on a Google search result). You do want to limit the data over the network, but this comes at a cost. Usually, the database will receive additional load. Once that becomes unacceptable, you might start putting things into session. Then you worry about memory concerns, etc. There is no silver bullet to the problem. It depends on what issues you are trying to address and what trade-offs are acceptable in your environment.
Thank you!
AstghikBest of luck.
- Saish

Report for List of Transfer orders in warehouse management

hi,
i want generate a report for list of transfer order orders in warehouse management
is there any report with you guys kindly help me,
or any standard report is there to display list of transfer orders in warehouse management
Thanks,
Rajesh
Edited by: rajesh kumar kandagatla on Feb 11, 2009 9:27 PM

Hi,
If it is one time requirement, you can run the report LT23 and download the data to excel sheet and donwload material details in another sheet and you can match the temperature column in excel file.
If it is permanent requirement, create a query and attach transaction code to that or write a seperate report for this requirement.
Please let me know.
Thanks
Nagarajan

Report for deleted line-items in Transfer Orders

Dear All,
Please help me in writing the code for "Report for deleted line-items in Transfer Orders".
regards,
nishu

Thanks. Repor completed.

Required Standard report for Deliveries Made vs Stock Transfer POu2019s

Hi,
Is there any standard report for Generate Daily Report detailing Deliveries Made vs Stock Transfer POu2019s...
Plz help.

Hi,
Using MKPF table take all material document, then usign the doc no (mblnr) take data from MSEG table
with movement type 641 and 642 in case of reversal (STO). 101 and 102 for (Delviery) .
take STO po of above movement type from table EKPO with PSTYP (item cat, field ) = 7. Comparing sto and delivery details and you will get the output.

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

How to refer field of DataSource in transfer rule for DSO object in BI 7.0

hello Gurus,
I am new to BI 7.
pls tellme how to refer field of DataSource in transfer rule for DSO object.
I will assign points to proper answer.
Praveen.

hi praveen,
when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
hope this will help you.
regards
vaibhav

Key instead of Text in Results Object in Crystal Reports For Enterprise

Hi All
I recently developed a report in Crystal Reports for Enterprise and at some point afterwards the text description of the hierarchy used in the report was changed. The Key remained the same, however this caused the report to crash. The solution was to click Edit Query Option in the Results Objects and simply come out without changing anything. This refreshed the results object pane and the report ran as normal. I work in an environment where the text of hierarchies is liable to change frequently and without notice and it will be unfeasible for me to constantly refresh the results object every time a change to a hierarchy is made. Therefore is there a way to define in CRE to use the Hierarchy key instead of the text as this is less likely to altered?
Many Thanks in advance
Neil

Excuse me I have my terminologies mixed up, what I mean is the name of the characteristic used in the report. An example would be a characteristic called with the text of "Material" and a key of "0MATERIAL", if I were to change the text description to "MAT" and the key where to remain the same. This would cause crystal report to error because it expecting the Characteristic name to be "Material". Is there a setting or something in CRE to have it default to the key only so if the text of a characteristic or even a key figure for that matter where changed there would be no impact to the Crystal report.
I hope this makes more sense this time round
Thanks
Neil

SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT - Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties.

Hi, can anyone help me troubleshoot the following please:
Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties. DDRs were not generated for 524 object(s) that had warnings while reading
critical properties.
Possible cause: OU name or Security Group name may contain at least a Unicode character which has conversion problem between Unicode and your system ANSI locale(e.g. Korean characters in English System Locale). The site server might not have access to
some properties of this object. The container specified might not have the properties available.
Solution: Please verify the Active Directory schema for properties that are not replicated or locked. Refer to the discovery logs for more information.
Does the error relate to 524 security groups? There are several invalid search paths listed in adsgdis.log, are these related?
Thanks,
Dale

You'll have to examine the log to determine exactly which objects its referring to. Although this is in the context of group discovery, group discovery still creates DDRs for computer objects within those groups so it could be either groups or computers.
This is not a search path issue though as it's clear that the discovery process found 524 different objects, but as stated, it could not properly read criticial properties of those objects and thus did not create DDRs for them.
As mentioned, reading the log in detail will list the objects individually and the reason it could not create a DDR for it.
Jason | http://blog.configmgrftw.com

About report groups and read programs for the object EC_PCA_SUM

Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
Shamim

Hi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM

API Clearcase for Business Objects Reports including Webi

Is there anyone out there who has developed a linked version of the following application?
Winners of the Business Objects Community Content Contest
I'm excited to announce the winners of the content contest that we ran earlier in the summer. The contest ran for seven weeks and had five categories, each of which offered a potential grand prize of $1,000 USD, a second prize of $300 USD, and a third prize of $200 USD.
Here is the list of winners, who have already been officially notified, along with a description of their submissions:
SDK APPLICATION
Grand prize - Sunil Abraham - "Bridge between Rational ClearCase version control and Business Object Enterprise"
This tool enables updating the location of report files on the BOE server from the ClearCase repository without using the web interface. The tool is a stand alone application developed in VB.NET using BusinessObjects Enterprise SDK and the ClearCase Automation Library (COM Interface). The user selects the ClearCase repository and the change set that needs to be updated on the BOE server. The tool queries BOE and returns the locations of the files to be updated. The user can then update the server location with the click of a button.

You cannot use query builder to update the object. You need to create a jsp page or java class and add the code to perform the action. The code should:
1. logon to enterprise
2. query for the objects to get InfoObjects.
3. loop through each object and update title using setTitle()
4. commit
5. logoff
Check various [sample|http://www.sdn.sap.com/irj/boc/samples?rid=/webcontent/uuid/b0daacb7-ad82-2b10-b2b6-f3e9fa3e716a] and [Developer Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/boesdk_java_dg_12_en.zip] on how to set up the environment etc,

HCM errors in phase Identify Objects for Transfer and Start Data Selection.

Hello Colleagues ,
Background: We are using TDMS HCM PA PD Expert package to transfer all of the HCM data
We are using TDMS 4.0 SP 5. We are trying to do the Configuraition in Identify Objects for Transfer and Start Data Selection.. In this phase, we are encountering the issue of 'choose to confirm to trigger data selection'. The only option in this activit is'confirm batch' and 'confirm online'. Even if we press the button, we are still encountering issues. What selections then or values can we use?Thank you. Kindly see screen shot
Regards,
Meinard

Hello Meinard,
There could be two issues:
First check if you have assigned the target ranges for the dialog user which you are using to select data from sender system. You need to maintain target ranges in activity 'Define target ranges for users' which you can find under activity "Configuration and Utilities in Control system".
Secondly, there could be authorizaton issues for the sender system user. Check for any authorization issue in SU53 in sender system for the user which you used to logon to sender system.
Thanks
Anita

Naming standards for reports in Business Objects?

Dear colleagues,
I am about to start development of universes, queries and reports in Business Object for a client. Does anyone of you have any tips on naming standards for the reports? The source system that the dataware house is based on is a fund system. Often the name can be some letters and some numbers. Is there any logic behind this that I can follow?
I will sign points!
Kind regards
Silje

Hi Silje,
Naming convetions should really tie in with your own processes. So it hard to say there is one for all.
I generally create a report library. This is a simple list in Excel of the reports. It will contain the following
Report Id: A number that is unique to each report, e.g. 1000
Report Name: A short descriptive name, Monthly_Returns
Report Location: The folder path to the report
Report Description: A full descriptive name
Report Contact: The person to contact about the report, developer or support person
Report Owner: Business Owner of the report
In WebI I would then call the report 1000_Monthly_Returns. I generally use the folder name to point to the area, so in the case of funds this report would be in the Funds folder.
Hope this helps
Alan

Report for transaction - Maintain Object - Roles - user Id ( Authorisation)

Hi
I want to generate a report for the following:
for a transaction
for a check/ maintain object name ( Ist column)
what are the roles ( iind column)
and
what are the user id for each roles.. (iiird column)
and
start up (yes / No) (ivth column)
Please advise.
Since, I need to do this report generation for more than 30 transactions, any immediate reply would be of great help.
Thanks in advance.
Partha

Hi
Try SUIM T-code and see if any of the report works
Thanks

Reports for transf objects frm pa/om n vice verca

Similar Messages

Maybe you are looking for