Reports not getting posted after webserver bounce.

Hi Gurus,
The reports are not getting posted after the webserver bounce occurred. This is the same webserver on which report repository is located.
However if we boot this webserver first and run a report, then it gets posted. And then after all the other webservers are booted, then the issue does not occur.
Please advise.
Thanks

Sounds a bit like the problem described in this Oracle Solution: ID 660253.1?
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=660253.1

Similar Messages

Production Reporting out put not getting deleted after 30mins what we set.

Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
Venkat

Hi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek

Report is not getting refreshed after changing prompts once again?

HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
Harshad

The workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

Data is not getting posted in ABAP Proxy.

Hi,
I am working on File to ABAPProxy scenario. The data is not going to proxy.
In PI sxmb_moni is status is successfull and in the R3 sxmb_moni the status is successfull. But the data is not getting posted in the tables(ABAPProxy). I had checked the inbound and oubound queues. And with the same input data, abapers cheked their code in Abapproxy, then the table is getting updated. When we trigger from PI, the tables are not getting updated.Please help me.
Thanks,
Pragathi.

Hi,
The problem may be
Case 1: Cache is not getting refreshed(Check SXI_CACHE)
Case 2: The Queue Is blocked (Check SMQ1 & SMQ2)
Regards,
Sainath

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Invoice is not getting posted to accounts it is showing the export error

invoice is not getting posted to accounts, it is showing an error of foreign trade / export data. where as it is with in the country. it is maintained for the plants abroad stock transport order.

A stock transport order to a location overseas etails crossing national borders and change of legal regulations. hence you need to maintina FT data. Please check the FT data in the billing header and item and maintian them. They are simple items like customs offices meas of transport...
This will give you a green status from the red status you will initially have. Then you can post the invoice.
regds

Files are not getting posted in destination directory,how to trace in XI

Hi,
our scenario is proxy to file.
We are posting files of .TRG and .DAT format in destination directory.Due to less space in destination directory, files only .TRG files are getting posted but .DAT are not getting posted.but i have checked in XI system SXMB_MONI,no error message is coming.message is getting processed successfully.
why it is not visible and to monitor that files are not saved at the destination.
Is this normal with XI that we can not see of files are really saved?

Hi,
> it should generate two files as per scenario but only one file is getting generated due to less space,
NO.
If No Space, The error will pops out in RWB .
Check the directory of the File Adapter you are using
Regards
Agasthuri Doss

Controlling Document Not Getting Posted

Dear All,
We have a peculiar scenario of Controlling Document not getting posted. Any pointers on wat could be the issue will be highly helpful.
Scenario:
We have an interface which posts an accounting document.
Dr. Expense
Cr. Balance Sheet.
The Cost Center is supplied thru the interface and FI document and Profit Center Document is posted without any issues. However, CO document is not generated, not sure wat could be the issue. We have performed the basic checks. Also, for the same expense account, we observe some postings have gone into CO where are some didnt'. The difference between documents posted with corresponding CO and documents without corrsponding CO posting is only the "Transaction Key". When we maintain blank Transaction key.. the system posts CO document, when transaction key is "WRX" for that specific GL the system doesn't post.
Not sure why Standard SAP behaves like that. Please advice wat items i need to check to resolve
this.
regards
Diwakar

Hello,
Make sure in OBYC, for key WRX, you have maintained the GL accounts.
Regards,
Ravi

COPA Documents not getting posted - Doc with unauthorized busi.trans SD00

Dear Experts,
COPA Documents are not getting posted, although billing /accounting documents are getting posted
We are getting the below error message, when KE4ST is executed
Kindly share your inputs for this issue
Document with unauthorized business transaction "SD00"
Message no. KE/AD604
Diagnosis
Document 6000000026 cannot be transferred to Profitability Analysis (CO-PA) because the business transaction"SD00'"(Billing document) is not profit-related.
System Response
The document is not posted to CO-PA.
Procedure
If you decide that the document does contain data relevant to CO-PA and that it therefore should be posted to CO-PA, change your Customizing settings accordingly. Otherwise you can ignore this message.
Advance Thanks,
Sanjai

Hi,
   1. First please check if COPA is active in the system i.e. tcode KEKE
   2. Then check if operating concern is active in tcode KEA0
   3. If so then check if billing document has an account assignment to PA segment. If not then maybe you have changed the account assignment in OKC9.
   4. If all the 3 conditions above are satisfied then you need to check if this is a made-to-order scenario (MTO). A made-to-order scenario can be identified in COPA in that the billing doc will have an account assignment to a sales order in addition to a
PA segment (field vbap-kzvbr = 'E' and vbap-vbelv = sales order no).
If the above conditions are satisfied then from a COPA point of view it is a MTO. In this case the invoice will be assigned to the sales order and will not be directly transferred to COPA. With the order settlement the costs and the revenues (invoice) will then be posted to COPA.
regards
Waman

Plz Help:Idoc not getting posted

In my requirement some of the idocs are not getting posted.The error message is "Balance not zero".Idoc type is "INVOIC01".In my requirement they told to look into the standard sap pgm"SAPLMRMC" in that FM MRM_AMOUNT_COMPARISON.Please give me suggestions to proceed.

Hi Hema,
Please check the invoice data that your are trying to send. From the error it seems that the IDoc is failing the data validations that must be placed in the program/FM that is used to generate/post the IDoc.
Regards,
Ashwinee

Idoc not getting posted into XI

Hello Experts,
I am trying IDoc-XI-File senario...
I have configured, ALE on backend system. Configured IDX1 and IDX2 in XI system.
At sender the Idoc has been sent without any errors.
But when I check in XI using SXMB_MONI there are no messages. Idoc is not getting posted into XI.
Please suggest as I am struck at this point. I am using XI 7.0
Thanks
Suma

Hi,
Kindly verify the ALE steps that you have performed...
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful...
PrasHaNt

FI - Interface triggerring multiple idoc is not getting posted

Hi all,
I have a scenerio, where I am receving data from SAP PI, which calls standard idoc ACC_DOCUMENT03 and which posts FI Document.
now, the problem is interface trigger's 2idoc with seperate number with same message type and same idoc type, but both the idoc are not getting posted and show's error like 'No currency line exists for line item 0000000001' and so on.
But the same idoc, when i proccess indivisually get's process gets posted successfully.
I have also done implementation in function module IDOC_INPUT_ACC_DOCUMENT.
As an abaper, I am not able to understand problem to take corrective steps.
Thanks & Regards
shashikant

hi,
if the IDoc is stuck in a qRFC queue means that the message did not reach the pipeline to be send to R3 so, anything in wrong at PI side.
please, go to SMQ2 and check whats happening. to know the queue name check the SXMB_MONI, select the proper message and scroll rightto the proper colum.
let us know.
Rodrigo P-.

Urgent:TimeCard entries thro TimeKeeper not getting posted

Hello,
We are creating TimeCards for a set of employees thro TimeKeeper,however this is not getting posted although we run the following programs
1.Transfer time from OTL to BEE
2.Validate for BEE
3.Transfer to BEE.
TimeCard is in a Approved State and there are no errors.
Can somebody pls advise what needs to be done?
Regards,
Gayatri

Hi Ramu,
Thanks for the response.
We are able to xfer successfully from SelfService to HRMS and neither the time Card is locked when we transfer from Timekeeper.
So can you pls tell me if there is any other issue?
Regards,
Gayatri

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Hi tania184,
Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

Reports not getting posted after webserver bounce.

Similar Messages

Maybe you are looking for