ReportServer intengration error - An attempt has been made to use a data extension 'ADS'

For a moment I thought I had the perfect SharePoint 2010 installation going until I went and created an Access Database site added some data then went to reports. I am getting the following error.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'ADS' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
Other than that, life is good. I have pretty much uninstalled and stuff repeatedly. I'm about to do another uninstall, reinstall because Monitorying isn't showing any errors. Which it should be, but that's another post; should the issue return.
But if anybody has any ideas about the ADS thing I would sure like to hear it.
Thanks!
Oh, the system is the following:
Server 2008 R2 Standard
SQL Server 2008 R2
SharePoint 2010 Release with 2010 October CU updates. I ran the CUs just before running SharePoint Configuration.
At the moment it is all house on the same machine; but if it goes to production then it will be turned in to a two-tier system.

OK - seems like we just have to read the manual!
You'll have to install the Reporting Services Add-in for Connected Mode:
A. Modify the C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config file on the Reporting Services server.
Under the <Data> node, under the <Extension> node, add the ADS data extension. For example:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c"/> -->
B. Modify the rssrvpolicy file on RS server.
Add the following XML code in the file under the <NamedPermissionSets> node:
<PermissionSet class="NamedPermissionSet" version="1" Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, find the following line and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”.
For further instructions please see Technet Article: "Using Access Services with SQL Reporting Services: Installing SQL Server 2008 R2 Reporting Services Add-In (SharePoint
Server 2010)".
Kind regards
Thanks for the reply, but for the clarification I found my config files in a different location other than stated in A - C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer
In Step B, the following is unclear to me - In the <CodeGroup>node, find the following line and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”. There are
MANY Code Group nodes. And in addition to that there are two with PermissionSetName="Execution"; Which one?
While awaiting your reply I'll go look at the docs and see if they are clearer.
Thanks!

Similar Messages

An error has occurred: Error HRESULT E_FAIL has been returned from a call to a COM component

This error message comes up with a user in InfoView attempts to modify/update a parameter when scheduling a report. This is not isolated to one particular report and occurs on a sporadic basis. Sometimes the user is able to successfully update the parameter with no error. Other times this error message occurs.
Has anyone seen this before and have any thoughts?
Thank you.
An error has occurred: Error HRESULT E_FAIL has been returned from a call to a COM component

Hi
Could you check this SAP Note 1653410
1772120
1568524
BR
SS

I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

How can I see when a transport has been made in an other environement?

Hi,
Is there anywhere in SAP where you can see if a transport as been made in an other environement? I'm trying to figure out if a transport in the DVL environement has been made in the SANDBOX environement. I tried SE10 transaction, but it seems that once the transport has been made in an other environement, it doesn't appear in this transaction anymore.
Thanks, points will be given if helpful.

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

RDLC Reports with Custom Font - Error HRESULT E_FAIL has been returned from a call to a COM component.

Hi,
I got an ASP.NET MVC (Razor View Engine and C#) application running on a Windows Azure Web Role.
I use RDLC local reports to create pdf files with printable price tags with respective barcodes.
I got it working on Azure after installing the barcode font (TrueType) using a start-up task. Recently, it stopped working without me changing anything related to this functionality.
I'm getting the following error and so far I didn't find any solution. I know the problem is the barcode font because the pdf is generated well with a standard font like Arial. Also, it works perfectly with barcodes when running the app
locally on my computer.
Error HRESULT E_FAIL has been returned from a call to a COM component.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Error HRESULT E_FAIL has been returned from a call to a COM component.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): Error HRESULT E_FAIL has been returned from a call to a COM component.]
System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) +0
Microsoft.ReportingServices.Rendering.RichText.TextRun.ShapeAndPlace(Win32DCSafeHandle hdc, FontCache fontCache) +1450
Microsoft.ReportingServices.Rendering.RichText.TextRun.GetWidth(Win32DCSafeHandle hdc, FontCache fontCache, Boolean isAtLineEnd) +30
Microsoft.ReportingServices.Rendering.RichText.LineBreaker.GetLine(Paragraph paragraph, TextLine line, Win32DCSafeHandle hdc, FontCache fontCache, FlowContext flowContext, Single left, Single right, Single height, Stack`1 lineRunsIndex, Stack`1 lineRunsCharIndex, Int32 lineIndents) +266
Microsoft.ReportingServices.Rendering.RichText.LineBreaker.FlowParagraph(Paragraph paragraph, Directions direction, Win32DCSafeHandle hdc, Single dpiX, FontCache fontCache, FlowContext flowContext, Boolean keepLines, SizeF flowContextSize, Int32& contentOffset) +768
Microsoft.ReportingServices.Rendering.RichText.LineBreaker.Flow(TextBox textBox, Win32DCSafeHandle hdc, Single dpiX, FontCache fontCache, FlowContext flowContext, Boolean keepLines, Single& height) +617
Microsoft.ReportingServices.Rendering.RichText.LineBreaker.Flow(TextBox textBox, Graphics g, FontCache fontCache, FlowContext flowContext, Boolean keepLines, Single& height) +182
Microsoft.ReportingServices.Rendering.RichText.TextBox.MeasureFullHeight(TextBox textBox, Graphics g, FontCache fontCache, FlowContext flowContext, Single& contentHeight) +759
Microsoft.ReportingServices.Rendering.HPBProcessing.TextBox.CalculateVerticalSize(PageContext pageContext) +467
Microsoft.ReportingServices.Rendering.HPBProcessing.TextBox.DetermineVerticalSize(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors) +35
Microsoft.ReportingServices.Rendering.HPBProcessing.PageItem.CalculateVertical(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, PageItem[] siblings, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors, Nullable`1 sourceWidth) +977
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.AddRowMember(TablixMember rowMember, Int32 colIndex, Int32 rowSpan, Int32 colSpan, LevelInfo childInfo, PageContext pageContext, Double updateWidth) +1104
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.CreateRowMemberChildren(Tablix tablix, TablixMember rowMemberParent, Int32 defTreeLevel, Boolean parentBorderHeader, Int32 parentRowIndex, Int32 parentColIndex, Int32 sourceIndex, Boolean resetContext, Boolean parentHasFooters, LevelInfo parentLevelInfo, PageContext pageContext) +4255
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.CreateRowMemberChildren(Tablix tablix, TablixMember rowMemberParent, Int32 defTreeLevel, Boolean parentBorderHeader, Int32 parentRowIndex, Int32 parentColIndex, Int32 sourceIndex, Boolean resetContext, Boolean parentHasFooters, LevelInfo parentLevelInfo, PageContext pageContext) +3657
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.CreateTablixRows(Tablix tablix, TablixMember rowMemberParent, Int32 defTreeLevel, Boolean parentBorderHeader, Int32 parentRowIndex, Int32 parentColIndex, List`1& pageStructMemberCell, Boolean ignoreTotals, Boolean& finishLevel, Boolean parentHasFooters, CreateItemsContext createItems, Double startInTablix, Double endInTablix, PageContext pageContext) +4341
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.CreateTablixItems(Tablix tablix, PageContext pageContext, CreateItemsContext createItems, Double startInTablix, Double endInTablix) +239
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.CreateVertically(PageContext pageContext, CreateItemsContext createItems, Double startInTablix, Double endInTablix, Double topInParentSystem) +374
Microsoft.ReportingServices.Rendering.HPBProcessing.Tablix.DetermineVerticalSize(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors) +662
Microsoft.ReportingServices.Rendering.HPBProcessing.PageItem.CalculateVertical(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, PageItem[] siblings, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors, Nullable`1 sourceWidth) +977
Microsoft.ReportingServices.Rendering.HPBProcessing.PageItemContainer.DetermineContentVerticalSize(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors, Boolean resolveState, Boolean resolveItem) +496
Microsoft.ReportingServices.Rendering.HPBProcessing.PageItemContainer.DetermineVerticalSize(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors) +281
Microsoft.ReportingServices.Rendering.HPBProcessing.PageItem.CalculateVertical(PageContext pageContext, Double topInParentSystem, Double bottomInParentSystem, PageItem[] siblings, List`1 ancestors, Boolean& anyAncestorHasKT, Boolean hasUnpinnedAncestors, Nullable`1 sourceWidth) +977
Microsoft.ReportingServices.Rendering.HPBProcessing.ReportSection.NextPage(RPLWriter rplWriter, Int32 pageNumber, Int32 totalPages, Double top, Double availableHeight, ReportSection nextSection, Boolean isFirstSectionOnPage) +1382
Microsoft.ReportingServices.Rendering.HPBProcessing.Report.NextPage(RPLWriter rplWriter, Int32 totalPages) +384
Microsoft.ReportingServices.Rendering.HPBProcessing.HPBProcessing.GetNextPage(RPLReport& rplReport) +437
Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer.Render(Report report, NameValueCollection deviceInfo, Hashtable renderProperties, CreateAndRegisterStream createAndRegisterStream) +1021
Microsoft.ReportingServices.Rendering.ImageRenderer.RendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream createAndRegisterStream) +93
My source code:
LocalReport report = new LocalReport();
// Rdlc file path
report.ReportPath = Server.MapPath("~/Reports/PriceTags.rdlc");
// Data source
report.DataSources.Add(new ReportDataSource("productsDataSet", dataset1));
// Some parameters
ReportParameterCollection reportParameters = new ReportParameterCollection();
reportParameters.Add(new ReportParameter("currency", "EUR"));
reportParameters.Add(new ReportParameter("precision", 2));
report.SetParameters(reportParameters);
// FileContentResult GenPdf(LocalReport report, string filename)
return GenPdf(report, "Price Tags");
Any help on this issue would be welcome and sorry for any grammar mistakes.
Thanks in advance.
Vitor Pinto

Hi Vitor,
Thanks for your posting!
It seems that the error may have more than one possibilities. I recommend you could try to use the Azure remote debugger to debug your cloud service project on Azure instance. Please see this tutorials:
http://blogs.msdn.com/b/cie/archive/2014/01/24/windows-azure-remote-debugging.aspx
You could debug your code using the cloud service URL.
And you could enable the Diagnostics feature for collecting Logging Data by Using Azure Diagnostics (http://msdn.microsoft.com/library/gg433048.aspx).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Report for finding to whom payments has been made

Hi Peers,
My requiement is to find to whom payment has been made , I am having the document number , document type , profit center.
I had check FB03 but also but i dont know exactly where to search.
Please tell me how can i do it.
Tista

Hi
Check FB03 there enviornement - usage somthing is there check whole data there.
ManoJ Shakya

GRPO received and A/P has been made of FULL Qty but still *OPEN*

Hello Experts,
GRPO is fully received and A/P Invoice has been made of full Qty (having only one row in GRPO). But still GRPO is open.
Please guide
Thanks & Regards,

Hai Shazad Nazir
Am using 2005 B pl40 i have also face this same problem some time,i found the reasion ,if Your GRPO FreightName is different from A/P Invoice FreightName means your GRPO will not be close,If this is your case means close yuour GRPO using right click in GRPO and close it.

Error detailed planning has been reset

PS Gurus,
user is trying to copy planning through CJ9BS
Gave project definition & versions & month & year
In setting button user selected copy detailed planning for Cost elements
User is getting error (detailed planning has been reset) Message no. KPT3017
Thanks
MM

We would appreciate if you post the solution for this.
Regards
Madhusekhar Gupta

AVReceive2 gives error: No format has been registered for RTP Payload type

Hello,
I am using the AVReceive2 program (http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVReceive.html#requirements) as posted to hopefully play back RTP in real time. I have it set to receive a known good RTP stream and I receive the following error:
No format has been registered for RTP Payload type 8
I have seen posts for a similar error but it seemed to be in the context of an A-law add on which am I not doing. Am I missing a plug-in or modification to the code?
thanks in advance,
Erich

Hi Erich,
I have the same problem when I using AVReceive2.java .Could yuo describe your solution in order to solve the issue?
In order to create the RTP stream I used VLC and is impossible to change the encapsulation method and then the payload type .
What kind of streaming server are yuo used?
My e-mail address is [email protected]
If you can , please write me your proceeding in order to solve the problem.
Thank you

I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

something other is dowloading somewhere on ipad

HT201272 there needs to be a how to download previous purchased ringtones, such a simple task has been made far to difficult for customers

there needs to be a how to download previous purchased ringtones, such a simple task has been made far to difficult for customers

Ringtones (and audiobooks) can't currently be re-downloaded from the store. If they are no longer on your device then have you not got them on your computer and/or on a backup ?

"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?

Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon.

TS3694 updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

http://lmgtfy.com/?q=iPhone+error+code+3004

Firefox gives me an error (SSL protocol has been disabled) when every I go to a site that requires a user name/password; how do I fix it

Everytime I try to log on to any website that requires a username & password, I receive the following error: SSL protocol has been disabled. I have tried all of the suggested solutions to this issue - but to no avail. I cannot log on to yahoomail. gmail, hotmail, ebay, paypal, or any other site that requires a user name and pass word. Internet Explorer works just fine - and again I have tried all the solutions suggested on the firefox support forum - but none have worked
== URL of affected sites ==
http://www.yahoo.com
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; InfoPath.2; .NET CLR 1.1.4322)

Check your settings on Tools > Options > Advanced > Encryption; see: http://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Encryption_tab

ReportServer intengration error - An attempt has been made to use a data extension 'ADS'

Similar Messages

Maybe you are looking for