Repository Update
Hi..
I am using 10.1.3.4 version obiee
When I update the repository it does not reflect in my dashboard page...
That is I have modified the 'Logical Column' calculation but it show the previous saved calculation.
I have stopped BI server and BI presentation server services before modify the repository..
Hi Kranthi,
Previously I have created the new calculated column with following condition
"case when table.Column =1000 then sum(value) else 0 end".
I inserted this column into my dashboard page and run this dashboard for year=2009 and period=3.
after that only I realized i need to do some changes in my created calculated column..
so i stopped all services related to BI and open the BI Administration in offline mode and i changed the same column like below
"case when table.Column =1000 then *sum(value)+1000* else 0 end".
after that i saved and check the Global Consistency and again i restart the services that related to BI
now i run the same dashboard page for the same prompt(year=2009 and period=3) it doesn't make any changes,
but i run the same dashboard page with different prompt(year=2008 and period=4) now it works successfully.
now again i run the same dashboard page for previous prompt(year=2009 and period=3) it again doesn't make any changes.
here i couldn't find where the problem was raised?
Thanks in Advance...
Similar Messages
-
Applying 10.1.2.3 Metadata Repository update in 10.1.4.3 distributed IDM
Hi there, I seem to have a unique issue.
I have the following config of 10.1.4.3 IDM :
SSO in a separate Oracle home
OID in a separate Oracle home
DB (10.2.0.50) in a separte OH and metadata repository installed in this DB
and this is set up in ASR replication mode with other similer setup.
Task : Apply 10.1.2.3 OracleAS patchset.
The story:
To be fully compliant according to Orcale we ned to apply 10.1.2.3 patch. This patch has two components - a software update and a Metadata Repository (MR) update.
I have applied software update to all the Oracle homes above (with the exception of DB ofcourse).
But to apply MR update I have to do it from a mid-tier OH that also has MR installed, I have none.
I tried installing MR update from SSO and OID oracle home but it would not allow me , I got this message :
The Metadata Repository Update cannot be run from the selected ORACLE_HOME.
The Update must be run from either an Identity Management with Metadata
Repository installation ...
But we have no middle-tier using this MR, and from this metalik note, it seems applying MR update is not mandatory, only a desirable housekeeping execrcise . :
Understanding How AS 10g Patch Sets Update the AS Metadata Repository [ID 795143.1]
Exract from that note :
a. apply the binary update to each AS Oracle Home in the AS Farm.
b. finally, if possible apply the MR update exactly once from any home that allows it to be run.
also from the same note :
Scenario 6: Applying the 10.1.2.3 AS patch set to a 10.1.4.3 Identity Management home.
The 10.1.2.3 AS patch set is a required patch set, as documented in :
Note: 465847.1 Oracle Identity Management 10g (10.1.4.0.1) Release Notes Addendum.
In this case, the MR Product schemas will not be directly accessed. It is however good practice/ housekeeping to apply the MR update in order to keep the MR in line with the binary patch sets.
My question :
I am correct in my understanding that apply 10.1.2.3 software update only is neccessary, applying the MR update is only desirable house keeping and not mandatory ?
Would you say this is the correct assessment. if not how would you go about applying the MR update ?
Thanks in advance for your answers.
NarsimhaTooManyOracleToysToLearn wrote:
Upgraded OPatch to 1.0.0.0.64
Attempted to apply 10.1.2.3 patchset 5983622
Encountered 2 issues, 1 has prevented us from continuing
Issue 1: Received following on stdout ...
failed to get the ias-instance ...
Error: no ias instance to append to
Val: 3Did you source the correct env file before applying the patch? --> $INST_TOP/ora/10.1.3/<CONTEXT_NAME>.env
Issue 2: When running the Configuration Assistants, it fails right away on step "Run One-Off Patches".
It's looking for the ocm.rsp. Received the following:
Oracle Configuration Manager (OCM) is included with this release of OPatch.
This is a OCM patch.
EBS environment: no OCM installation and configuration.
To run in silent mode, OPatch requires a response file for Oracle Configuration Manager (OCM).
Run /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp to generate an OCM response file. The generated response file can be reused on different platforms and
in multiple OPatch silent installs.
To regenerate an OCM response file, rerun /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp.
ERROR: OPatch failed because of cmd. args. problem.Error Applying Patch Using OPatch "This version of OPatch is obsolete", "OPatch failed because of cmd. args. problem" [ID 762403.1]
10.1.4.3 Patch Set Pre Installation Step: dcmctl updateconfig FAILS: Fatal Relocation Error [ID 849474.1]
Getting Error 'OPatch requires a response file for Oracle Configuration Manager (OCM)' while Running OPatch [ID 727991.1]
Thanks,
Hussein -
Upgrade related query- Repository Update
Hi All,
As mentioned in the upgrade guide :
After installation of MDM 7.1 and having started the MDM 7.1 Server use the MDM Console to update
your repositories. Choose Update Repository from the context menu of each repository. The MDM Console then updates
the repository so that it can be used with the latest builds. The data in the repository is automatically
upgraded.
But, i did the same thing but in my case after un-archiving the repository and login in with respective correct repository credentials,Right clicking on repository the option "Update Repository" is not active ...How will i do this action ?how do i update the repository now ?
( I have tried by Loading & Unloading also )
Please suggest !
Regards,
HarmonyHi Harmony,
Please follow below steps :
Steps involved in the MDM 7.1 Upgradation
1. Installation of MDM 7.1 in Dev Environment
2. Archive MDM 5.5 repository from the Production system
3. Unarchive the repository in the Dev system
4. Update repository in the Dev
5. Update and Test Import Maps
6. Update and Test Syndication Maps
7. Testing at the Portal level
8. Java API upgrade and check the custom made functionalities with API in the repository
9. CLIX Command Scripts need to be reworked
10. MDM ports to be reworked with the help of repository schema
11. Import the repository schema to the production environment after installation of 7.1 in production system.
12. Transportation from Dev to Production of JAVA API, CLIX
Others Activities which need to be Noted/Performed
MDM Servers
Installed in different directory
MDM Archive Files
Archive files to be copied to the new directory
MDM GUI Client
Different Installation directory
MDM Log files:
5.5 Version is XML based
7.1 version is CSV based
MDM 7.1 doesnu2019t support the log format of 5.5 version.
Copy the files from the u2018logu2019 and u2018report folderu2019 to an extra folder together with MDM_log.xsl, which allows viewing of logs from the browser
Distribution Folder content
Copy the files from the 5.5 directory to the new directory
MDM Server Setting
Mds.ini parameter settings to be checked.
Some parameters are obsolete, some parameters are replaced with newer one
MDM Import Server Settings
Mdis.ini parameters need to be checked
MDM Syndication server setting
Mdss.ini setting to be checked.
Transfer the settings of
SLD Registration u2013 Reuse the MDM 5.5 SLD Registration
Wily Instrumentation
Wily Instrumentation level Threshold
MDM Java API activities
Deploy the 7.1 Java APIs and test the existing Java programs running for the repository
Checking the MDM Compatability with WebSphere Portal
Uninstallation of MDM 5.5 SP06 (Optional)
Thanks and Regards
Praful. -
TVUR + DFS-R Manage Repository - Update View doesn't display downloaded udpates
About 2-3 months ago our tvur started exhibiting some weird behavior and randomly stopped displaying udpates that are downloaded in the repository. thininstaller will continue to install the updates but it makes it really difficult to manage the updates as you can't set them to active etc.
The xml file looks fine from what I can see but for whatever reason it just won't display the existing updates. My previous fix was to set up the repositor from scratch, but that's a pain and I'd like to avoid downloading udpates again so they can replicate to our 20-30 sites.
Solved!
Go to Solution.Sir you are brilliant
for those running his checker tool. Make sure you run it as a user with rights to the read and write to the repository. It will check if you only have read, but it won't auto download the descriptors (if necessary).
Worked like a dream and my TVUR is working again. -
Component Repository Update : Unknown qualifier UMLPackagePath
As per note(669669), updating the Component Repository (CR Content), trying to import the file cimsap71604_0-20008269.zip in SLD , but I am facing the below error.
"ERROR DURING IMPORT: CIM_ERR_FAILED: Unknown qualifier UMLPackagePath(class: CIM_ManagedElement,namespace sld/active)"
Also , tried with Object Manager Parameter values set to 'false", but error still exists.
Could you pls guide me to solve this errror.Hi!
First of all, clear the cache by going to Java Control Panel -> Temporary Internet Files -> View...
Delete everything from there;
After, go to:
http://<host>:<port>/dir/start/index.jsp
-> Administration -> Repository tab (do the same in Directory tab as
well) -> Java Web Start Administration -> click on "Re-initialization
and force-signing". (Notice that por PI 7.1X the option is "Restore Archives and
Generate New Signature")
After, please try to access the tools again. Repeat the process if not
worked in the first time.
Also ensure you use Java version 1.4.2 for XI 3.0/7.0 and version 1.5 for PI 7.1.
You may have to update to the latest java version in the website of SUN as well.
If nothing helped, then you may try redeploying the XITOOL component (use SDM for 3.0 and 7.0/ use JSPM for PI 7.1).
Regards,
Caio Cagnani -
Brand New Update Retriever Repository, No Visible Updates
I've been using TVUR and System Update for over two years and, except for the temporary program cancellation, it's worked very well.
My TVUR workstation died and I've tried to recycle the old repository using another workstation (the files are on a file server). But this hasn't worked out - the lack of machine associations after importing all 800 updates made the old, 16GB repository nearly worthless.
So I started over, with a new repository, running TVUR on the file server (Windows Server 2003 R2 x64). It sets up quickly and retrieves updates, but only 40. That's 7 machine types, 3 Windows OS's (or 17 triplets) results in 40 updates... it seems a little low.
When I try Manage Repository\Update View, I see nothing. No updates. It doesn't matter what I select in the Filters.
The session directory shows tons of update information for each machine/OS/language triplet:
Directory of C:\Program Files (x86)\Lenovo\Update Retriever\session
12/14/2010 05:34 PM <DIR> .
12/14/2010 05:34 PM <DIR> ..
12/14/2010 05:33 PM 32,296 2082-Windows 7-EN-QuestResponse.xml
12/14/2010 05:33 PM 62,606 2082-Windows Vista-EN-QuestResponse.xml
12/14/2010 05:33 PM 45,926 2518-Windows 7-EN-QuestResponse.xml
12/14/2010 05:33 PM 34,235 2765-Windows 7-EN-QuestResponse.xml
12/14/2010 05:33 PM 64,545 2765-Windows Vista-EN-QuestResponse.xml
12/14/2010 05:33 PM 26,921 7658-Windows 7-EN-QuestResponse.xml
12/14/2010 05:33 PM 73,677 7658-Windows Vista-EN-QuestResponse.xml
12/14/2010 05:33 PM 57,093 7658-Windows XP-EN-QuestResponse.xml
12/14/2010 05:33 PM 26,921 7664-Windows 7-EN-QuestResponse.xml
12/14/2010 05:33 PM 73,677 7664-Windows Vista-EN-QuestResponse.xml
12/14/2010 05:34 PM 58,032 7664-Windows XP-EN-QuestResponse.xml
12/14/2010 05:34 PM 29,166 8744-Windows 7-EN-QuestResponse.xml
12/14/2010 05:34 PM 89,591 8744-Windows Vista-EN-QuestResponse.xml
12/14/2010 05:34 PM 143,771 8744-Windows XP-EN-QuestResponse.xml
12/14/2010 05:34 PM 34,129 8892-Windows 7-EN-QuestResponse.xml
12/14/2010 05:34 PM 93,745 8892-Windows Vista-EN-QuestResponse.xml
12/14/2010 05:34 PM 73,455 8892-Windows XP-EN-QuestResponse.xml
Lots of XML data gathered there, but nothing in the gui.
Is it even possible to build a new repository from scratch?
Or automatically gather the metadata for the old updates (which was lost with the dead TVUR workstation)?
Any advice would be appreciated.
dcslnPassing along a message from a lurker:
"The deal with TVUR is that the "get new updates" bit will be greyed out until valid machine types are populated, otherwise it doesn't know what to look for."
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! -
Serenityvalley wrote:
You need to go to This Page and download just about everything on it -espeically the System Update Deployment Guide and start reading. It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
Here are the few simple things you have to do:
1. Download Update Retriever (UR) and Thin Installer (TI) from here.
2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
3. To initialize Update Retriever:
a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
8. Debugging Tips
TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2.
Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
Message: 'Share name' to use:
This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.) Also be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
Message Edited by JaneL on 05-08-2009 10:30 PM
Message Edited by zilla on 2009-05-28 12:48 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
How to download the Solaris 11.2 latest SRU in order to update the local repo offline
Hello,
I am not able to find the SRU patchset to download in order to update the local repo offline. Any idea.These are actually in zipped archive format rather than ISO. You will probably want the install guide patch that includes the script that will help apply the incremental SRU repo on top of an existing local repository:
https://updates.oracle.com/Orion/PatchDetails/process_form?patch_num=20845983
All the SRUs are documented in this MOS page, along with the SRU READMEs:
Oracle Solaris 11.2 Support Repository Updates (SRU) Index
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1672221.1
-- Alan -
Repository changes in online mode in HA environment
Hello,
Is it possible to make changes to the rpd in online mode within a highly available (horizontally scaled on two virtual hosts, Host1 and Host2) OBIEE 11g environment without disrupting users? Here's what currently happens in my environment, and I believe this is the expected behavior:
1) Open repository in online mode via Admin tool (connects to Host1, which is the master BI server).
2) Make an update and save it.
3) Some users will see the updates right away, some won't. The ones who see it right away are connected to the BI Server on Host1, those who don't see it are connected on Host2 at that particular moment. If the user keeps hitting refresh, sometimes the user sees the updates and other times does not (it depends on which host is used each time user refreshes browser).
4) Restart BI Server process on Host2.
5) Now everyone running a request on Host2 during the restart will get an error. They hit refresh, the error goes away because they are taken to Host1 now.
6) Once the BI Server on Host2 comes back online, all users will see the update made in Step 2.
Our problem is we want to have a HA environment but we also want to make several repository updates throughout the day in online mode without causing a disruption to our users. I don't currently see a way to do this without causing disruptions. Does anyone else have this challenge and if so, how do you manage it?
-MattI would be most interested in a solution for this also
-
Hi Experts,
I am facing a problem.
1)During archive repository I am facing a error. i.e. Repoaitory failed to archive. (I don't know how but I have pressed entered duing the archive process is going on)
2)So again I take the archive of that repository after right clicking on it and given same name. Now it is successfully archived.
3)But When I want to unarchive after right clicking on server I can't see that archive file name in the drop down list.
4)Then againg I archive file and give diff. name. Now during unarchive after right clicking on the server I can see the archive file name.
4)After successful unarchiving one repository [I have given name suppose (test) ]is created.
5)Finally I right click on test and have done load repository> update indecies.
But Now I am facing a error repository failed to load..
How to check the error and solve this error.
Please Suggest.
ThanksHi Pappu,
Right Click on the repository and try Verify -> Repair option.Also unload other repositories for time being and try to load the newly unarchived repository.This type of error occurs due to several reasons like Some Errors present in the repository itself or due to less disk space etc.
Regards,
Jitesh Talreja -
UpdateRetriever + System Update
Hi all,
I have been using sccm, thininstaller and updateretriever a while now. Thing what I have discovered is that Lenovo System Update always find newer drivers than update retriever. sometimes ur cant even find all the needed drivers.
Is there a way to import these (systemupdate drivers) to updateretriever database? If I try to import updates which system update has found ur cant find those drivers.
I use thininstaller with sccm osd ts and update this repository with update retriever.
thanks in advance jarmoAre you using the latest Update Retriever? It should be version 4.2 and can be downloaded here: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/updateretriever402-2011-07-27.exe
The package you mentioned is the WiFi Driver for Intel Cards (For Windows XP 32bit) and it shows up fine for me with Update Retriever. Of course, once I download it to my repository and search again, it does not show in the search results. Can you verify that you do not already have it in your repository by going to Manage repository -> Update view? -
Hi Everyone,
I inherited a system that is currently OAS 10.1.2.2 and looking into applying 10.1.2.3 patchset. I am reading about applying the 10.1.2.3 metadata Repository update. I was wondering if there is a way to determine if 10.1.2.2 metadata Repository update has been applied? I tried ldapsearch command but it returns nothing. Any ideas?
Thank you.
TroyYou may wanna note that,
- This patchset 3 10.1.2.3 does not require portal 10.1.4. This patch set brings up your OAS components to 10.1.2.3 version from 10.1.2.0.2 level.
- For those who are using portal 10.1.2.0.2 version, this patch set upgrades it to 10.1.2.3 as well - when they apply it on the portal repository.
- For those users whose portal version is 10.1.4.0.0, it upgrades it to 10.1.4.2 version - when they apply it on its portal repository.
- Metadata Repository upgrade is required in each case.
- It has been a standard practice from Oracle Support to ask you to upgrade to the latest supported version of that release number - for almost all of your problems. For 10g Release 2, 10123 and for portal 10142 are the latest supported versions which you get after this upgrade.
Therefore, for all of your problems regarding any component on your OAS or on portal, Oracle Support would recommend highly to first get up to the latest supported version. Then they will recommend individual patches or fixes on top of it.
hope that helps!
AMN -
Audit is enabled and working fine in Global zone.
root@MMS11:/var/audit# uname -a
SunOS MMS11 5.11 11.2 sun4v sparc sun4v
root@MMS11:/var/audit#
root@MMS11:/var/audit#
root@MMS11:/var/audit# pkg info entire
Name: entire
Summary: entire incorporation including Support Repository Update (Oracle Solaris 11.2.3.4.1).
Description: This package constrains system package versions to the same
build. WARNING: Proper system update and correct package
selection depend on the presence of this incorporation.
Removing this package will result in an unsupported system. For
more information see
https://support.oracle.com/rs?type=doc&id=1672221.1.
Category: Meta Packages/Incorporations
State: Installed
Publisher: solaris
Version: 0.5.11 (Oracle Solaris 11.2.3.4.1)
Build Release: 5.11
Branch: 0.175.2.3.0.4.1
Packaging Date: October 2, 2014 10:39:23 PM
Size: 5.46 kB
FMRI: pkg://solaris/[email protected],5.11-0.175.2.3.0.4.1:20141002T223923Z
root@MMS11:/var/audit#
root@MMS11:/var/audit# ls -lhtr
total 34343
-rw-r----- 1 root root 400K Apr 7 16:41 20150407134107.20150407134155.MMS11
-rw-r----- 1 root root 11M Apr 7 17:21 20150407134157.20150407142120.MMS11
-rw-r----- 1 root root 5.5M May 4 13:57 20150504103940.not_terminated.MMS11
root@MMS11:/var/audit#
root@MMS11:/var/audit# ls -lhtr /var/adm/auditlog
-rw-r----- 1 root root 1.0M May 4 13:57 /var/adm/auditlog
root@MMS11:/var/audit# audit -s
root@MMS11:/var/audit# zoneadm list -cv
ID NAME STATUS PATH BRAND IP
0 global running / solaris shared
5 MMS_NG running /zones/MMS_NG solaris shared
=======================================================
but I am unable to enable audit on local zone.
I have following
root@MMS11:/var/audit# zlogin MMS_NG
[Connected to zone 'MMS_NG' pts/14]
Oracle Corporation SunOS 5.11 11.2 September 2014
You have mail.
root@MMS_NG:~#
root@MMS_NG:~#
root@MMS_NG:~# audit -s
audit: Neither local nor remote auditing is configured in the non-global zone.
root@MMS_NG:~#
root@MMS_NG:~# audit -n
audit: Neither local nor remote auditing is configured in the non-global zone.
root@MMS_NG:~# cd /var/audit
root@MMS_NG:/var/audit# ls -lhtr
total 94399
-rw-r----- 1 root root 149M Apr 7 16:40 20150208124745.not_terminated.MMS_NG
How I can enable audit in NG zone, I want to enable audit logs with syslog service. as enabled and configured on Global Zone.I'm not sure why Ur looking for /etc/system in zones..
now in soalris 10u10 /soalrs 11..you can configure the kernel parameters as application/user specific
you can use projadd command to add the resources like shared memory
if you want add the parameters as global you can use
zonecfg
you can refer this doc what parameters u can add to zone with zonecfg
http://docs.oracle.com/cd/E19455-01/817-1592/z.config.ov-1/index.html
zone.cpu-shares (preferred: cpu-shares)
zone.max-locked-memory
zone.max-lwps (preferred: max-lwps)
zone.max-msg-ids (preferred: max-msg-ids)
zone.max-sem-ids (preferred: max-sem-ids)
zone.max-shm-ids (preferred: max-shm-ids)
zone.max-shm-memory (preferred: max-shm-memory) -
Patching Grid Control OMS and Agent to 10.2.0.5 issue
Oracle 11gR1 RHEL5 - Grid Control 10.2.0.5
Hi All,
I have been stuck on this issue for over a month (was relying on Oracle supports help and they just would not reply) and I can't figure it out. Basically, what happened is that my 10.2.0.5 patch set failed partiallty when I was applying it to the OMS. Here is what is going on right now:
Database Repository (EMREP) - 11gR1 (11.1.0.6) - /opt/app/oracle/product/11.1.0/db_1
OMS - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/oms10g
Agent - 10.2.0.5 - /opt/app/oracle/product/10.2.0/grid_1/agent10g
When I was almost done with the 10.2.0.5 patch on the OMS, OUI gave me the following error:
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration
assistants at this time. Not successfully running any "Recommended" assistants
means your system will not be correctly configured.
*1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the*
failures.
*2. Fix the errors causing these failures.*
*3. Select the failed assistants and click the 'Retry' button to retry them*
When I checked the logs I found the following messages (Here is a part of it...I think before it started to fail):
Finished deleting the above files...
INFO: Configuration assistant "OMS Oneoff Patch Application" succeeded
INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
For more details :
-For configuration issues, look at the log files present in following location:
/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
-For repository failures, look at the log files
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.
2.0.5.0
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
-If not able to identify the repository issues, contact ORACLE Support.
-After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
For UNIX :
./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
For Windows :
runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
Exception : java.lang.Exception: Command: /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rhel-grid)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep))) -action upgrade -no_transx -no_verify -verbose -repos_user sysman -output_file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 failed. Exit code: expected [0 ], but got 45
INFO: Configuration assistant "Repository Upgrade" failed
*** Starting OUICA ***
Oracle Home set to /opt/app/oracle/product/10.2.0/grid_1/oms10g
Configuration directory is set to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs. All xml files under the directory will be processed
Parsing configuration file config.xml ....
Ended Parsing configuration file config.xml
Start Processing configuration tool Oracle Internet Directory Patch Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Buffer size for copying file is set to 2048
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/patchca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Oracle Internet Directory Patch Configuration Assistant
Start Processing configuration tool Directory Integration Platform Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/ldap/log/oidca.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Directory Integration Platform Configuration Assistant
Start Processing configuration tool OC4J Instance Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/home_default_island_1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/operations from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml from the file path expanding...
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/j2ee/home/log/log.xml to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/log.xml
Number of file(s) copied is 1
Number of directories copied is 0
End Processing configuration tool OC4J Instance Configuration Assistant
Start Processing configuration tool OPMN Configuration Assistant - start HTTP server....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant - start OCA Instance
Start Processing configuration tool Wireless Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Wireless Configuration Assistant
Start Processing configuration tool Wireless Metadata Repository Update....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/wireless/logs/upgrade_CA.out could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Wireless Metadata Repository Update
Start Processing configuration tool Portal Metadata Repository Update....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log from the file path expanding...
WARN: Source file /opt/app/oracle/product/10.2.0/grid_1/oms10g/portal/upg/plsql/upgrade.log could not be found. Nothing will be copied for this file
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool Portal Metadata Repository Update
Start Processing configuration tool OPMN Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/states from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log from the file path expanding...
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCacheAdmin~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCacheAdmin~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EM~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EM~default_island~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/dcm-daemon~dcm-daemon~dcm~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/dcm-daemon~dcm-daemon~dcm~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ons.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ons.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/WebCache~WebCache~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/WebCache~WebCache~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~OC4J_EMPROV~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~OC4J_EMPROV~default_island~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/OC4J~home~default_island~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/OC4J~home~default_island~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/opmn.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/opmn.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/HTTP_Server~1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/HTTP_Server~1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/opmn/logs/ipm.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/ipm.log
Number of file(s) copied is 10
Number of directories copied is 0
End Processing configuration tool OPMN Configuration Assistant
Start Processing configuration tool Application Server Control Configuration Assistant....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/pafLogs from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx from the file path expanding...
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.10 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.10
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.4 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.4
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.7 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.7
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/nfsPatchPlug.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/nfsPatchPlug.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-application.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-application.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.9 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.9
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.8 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.8
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emdctl.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emdctl.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emctl.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emctl.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/server.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/server.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/secure.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/secure.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.6 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.6
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em.nohup to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em.nohup
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.errors
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/em-web-access.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/em-web-access.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emias.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emias.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.5 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.5
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0.errors to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.4.0.errors
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.3 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.3
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.trc to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.trc
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/rmi.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/rmi.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagent.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagent.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.trc.2 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.trc.2
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emca_repos_out_of_box12_56_33.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emca_repos_out_of_box12_56_33.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emagentfetchlet.log to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emagentfetchlet.log
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emoms.log.1 to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emoms.log.1
Completed copying file /opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.transx to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/emrepmgr.log.10.2.0.5.0.transx
Number of file(s) copied is 34
Number of directories copied is 0
End Processing configuration tool Application Server Control Configuration Assistant
Start Processing configuration tool DCM Repository Update Assistant ....
Preparing for copying /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/* to /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs
Expanding source path /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/*
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/dcmctl_logs from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/emd_logs from the file path expanding...
Adding the file /opt/app/oracle/product/10.2.0/grid_1/oms10g/dcm/logs/daemon_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Update Assistant
INFO: The "/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Since the option is to overwrite the existing /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
Repository Upgrade is failed with errors. Restore the database, rectify the errors and retry the install.
For more details :
-For configuration issues, look at the log files present in following location:
/opt/app/oracle/product/10.2.0/grid_1/oms10g/cfgtoollogs/cfgfw
-For repository failures, look at the log files
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0
/opt/app/oracle/product/10.2.0/grid_1/oms10g/sysman/log/emrepmgr.log.10.2.0.5.0.errors
-If not able to identify the repository issues, contact ORACLE Support.
-After the Repository issues are rectified and upgraded successfully, execute the below runConfig command to run remaining config tools.
Goto /opt/app/oracle/product/10.2.0/grid_1/oms10g/oui/bin directory and run below command.
For UNIX :
./runConfig.sh ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
For Windows :
runConfig.bat ORACLE_HOME=/opt/app/oracle/product/10.2.0/grid_1/oms10g ACTION=patchsetConfigure MODE=perform COMPONENT_XML=oracle.sysman.top.oms.10_2_0_5_0.xml
Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
Exception : java.lang.Exception:
REPOSITORY UPGRADE STATUS : 3
INFO: Configuration assistant "Repository Upgrade" failed
I would appreciate any help on this as I have been stuck on it since April :( Not too happy with Oracle Support.
Thanks much to all!
JrOraDBAHere is the output for when I applied the patch:
opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /opt/app/oracle/product/10.2.0/grid_1/db10g
Central Inventory : /opt/app/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-04-22_12-07-14PM.log
ApplySession applying interim patch '4329444' to OH '/opt/app/oracle/product/10.2.0/grid_1/db10g'
Invoking fuser to check for active processes.
Invoking fuser on "/opt/app/oracle/product/10.2.0/grid_1/db10g/bin/oracle"
OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
*(Oracle Home = '/opt/app/oracle/product/10.2.0/grid_1/db10g')*
Is the local system ready for patching?
*Do you want to proceed? y*
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '4329444' for restore. This might take a while...
Backing up files affected by the patch '4329444' for rollback. This might take a while...
Patching component oracle.rdbms, 10.1.0.4.0...
Updating archive file "/opt/app/oracle/product/10.2.0/grid_1/db10g/lib/libserver10.a" with "lib/libserver10.a/qerix.o"
ApplySession adding interim patch '4329444' to inventory
Verifying the update...
Inventory check OK: Patch ID 4329444 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 4329444 are present in Oracle Home.
Running make for target ioracle
The local system has been patched and can be restarted.
OPatch succeeded.
However, the weird thing is that I don't see it in the lsinventory:
*/opt/app/oracle/product/10.2.0/grid_1/db10g/OPatch/opatch lsinventory*
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /opt/app/oracle/product/10.2.0/grid_1/db10g
Central Inventory : /opt/app/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /opt/app/oracle/product/10.2.0/grid_1/db10g/oui
Log file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/opatch2009-06-09_09-37-54AM.log
Lsinventory Output file location : /opt/app/oracle/product/10.2.0/grid_1/db10g/cfgtoollogs/opatch/lsinv/lsinventory2009-06-09_09-37-54AM.txt
Installed Top-level Products (2):
Oracle Database 10g Patch Set 3 10.1.0.5.0
Oracle Enterprise Manager Repository Database 10.2.0.3.0
There are 2 products installed in this Oracle Home.
Interim patches (1) :
Patch 5632264 : applied on Thu Apr 23 12:23:10 CDT 2009
Created on 8 Feb 2007, 00:38:09 hrs PST8PDT
Bugs fixed:
*5632264*
OPatch succeeded.
Do you think I should restore the backup (and I only have the database backup, not the Oracle Home backup)?
THanks. -
Compton, Openbox and Catalyst 14
Hi.
I'm new with Arch Linux, Openbox and Compton, so...
I install compton and after that ATI driver... when I do that...the screen freeze and I can't see what I type/click, but if I kill the process (CTRL+ATL+F2, ps aux, kill -9...), everything is back again.
I use the Vi0L0's catalyst, and the compton.conf you can see below.
How can I fix that, for enable transparency, shadow and of course: Steam.
# Backend
# Backend to use: "xrender" or "glx".
# GLX backend is typically much faster but depends on a sane driver.
backend = "glx";
# GLX backend
glx-no-stencil = true;
# GLX backend: Copy unmodified regions from front buffer instead of redrawing them all.
# My tests with nvidia-drivers show a 10% decrease in performance when the whole screen is modified,
# but a 20% increase when only 1/4 is.
# My tests on nouveau show terrible slowdown.
# Useful with --glx-swap-method, as well.
glx-copy-from-front = false;
# GLX backend: Use MESA_copy_sub_buffer to do partial screen update.
# My tests on nouveau shows a 200% performance boost when only 1/4 of the screen is updated.
# May break VSync and is not available on some drivers.
# Overrides --glx-copy-from-front.
# glx-use-copysubbuffermesa = true;
# GLX backend: Avoid rebinding pixmap on window damage.
# Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe).
# Recommended if it works.
# glx-no-rebind-pixmap = true;
# GLX backend: GLX buffer swap method we assume.
# Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1).
# undefined is the slowest and the safest, and the default value.
# copy is fastest, but may fail on some drivers,
# 2-6 are gradually slower but safer (6 is still faster than 0).
# Usually, double buffer means 2, triple buffer means 3.
# buffer-age means auto-detect using GLX_EXT_buffer_age, supported by some drivers.
# Useless with --glx-use-copysubbuffermesa.
# Partially breaks --resize-damage.
# Defaults to undefined.
glx-swap-method = "undefined";
# Shadows
# Enabled client-side shadows on windows.
shadow = true;
# Don't draw shadows on DND windows.
no-dnd-shadow = true;
# Avoid drawing shadows on dock/panel windows.
no-dock-shadow = true;
# Zero the part of the shadow's mask behind the window. Fix some weirdness with ARGB windows.
clear-shadow = true;
# The blur radius for shadows. (default 12)
shadow-radius = 5;
# The left offset for shadows. (default -15)
shadow-offset-x = -5;
# The top offset for shadows. (default -15)
shadow-offset-y = -5;
# The translucency for shadows. (default .75)
shadow-opacity = 0.5;
# Set if you want different colour shadows
# shadow-red = 0.0;
# shadow-green = 0.0;
# shadow-blue = 0.0;
# The shadow exclude options are helpful if you have shadows enabled. Due to the way compton draws its shadows, certain applications will have visual glitches
# (most applications are fine, only apps that do weird things with xshapes or argb are affected).
# This list includes all the affected apps I found in my testing. The "! name~=''" part excludes shadows on any "Unknown" windows, this prevents a visual glitch with the XFWM alt tab switcher.
shadow-exclude = [
"! name~=''",
"name = 'Notification'",
"name = 'Plank'",
"name = 'Docky'",
"name = 'Kupfer'",
"name = 'xfce4-notifyd'",
"name *= 'VLC'",
"name *= 'compton'",
"name *= 'Chromium'",
"name *= 'Chrome'",
"name *= 'Firefox'",
"class_g = 'Conky'",
"class_g = 'Kupfer'",
"class_g = 'Synapse'",
"class_g ?= 'Notify-osd'",
"class_g ?= 'Cairo-dock'",
"class_g ?= 'Xfce4-notifyd'",
"class_g ?= 'Xfce4-power-manager'"
# Avoid drawing shadow on all shaped windows (see also: --detect-rounded-corners)
shadow-ignore-shaped = false;
# Opacity
menu-opacity = 1;
inactive-opacity = 1;
active-opacity = 1;
frame-opacity = 1;
inactive-opacity-override = false;
alpha-step = 0.06;
# Dim inactive windows. (0.0 - 1.0)
# inactive-dim = 0.2;
# Do not let dimness adjust based on window opacity.
# inactive-dim-fixed = true;
# Blur background of transparent windows. Bad performance with X Render backend. GLX backend is preferred.
# blur-background = true;
# Blur background of opaque windows with transparent frames as well.
# blur-background-frame = true;
# Do not let blur radius adjust based on window opacity.
blur-background-fixed = false;
blur-background-exclude = [
"window_type = 'dock'",
"window_type = 'desktop'"
# Fading
# Fade windows during opacity changes.
fading = true;
# The time between steps in a fade in milliseconds. (default 10).
fade-delta = 4;
# Opacity change between steps while fading in. (default 0.028).
fade-in-step = 0.03;
# Opacity change between steps while fading out. (default 0.03).
fade-out-step = 0.03;
# Fade windows in/out when opening/closing
# no-fading-openclose = true;
# Specify a list of conditions of windows that should not be faded.
fade-exclude = [ ];
# Other
# Try to detect WM windows and mark them as active.
mark-wmwin-focused = true;
# Mark all non-WM but override-redirect windows active (e.g. menus).
mark-ovredir-focused = true;
# Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of using FocusIn/Out events.
# Usually more reliable but depends on a EWMH-compliant WM.
use-ewmh-active-win = true;
# Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on.
detect-rounded-corners = true;
# Detect _NET_WM_OPACITY on client windows, useful for window managers not passing _NET_WM_OPACITY of client windows to frame windows.
# This prevents opacity being ignored for some apps.
# For example without this enabled my xfce4-notifyd is 100% opacity no matter what.
detect-client-opacity = true;
# Specify refresh rate of the screen.
# If not specified or 0, compton will try detecting this with X RandR extension.
refresh-rate = 0;
# Set VSync method. VSync methods currently available:
# none: No VSync
# drm: VSync with DRM_IOCTL_WAIT_VBLANK. May only work on some drivers.
# opengl: Try to VSync with SGI_video_sync OpenGL extension. Only work on some drivers.
# opengl-oml: Try to VSync with OML_sync_control OpenGL extension. Only work on some drivers.
# opengl-swc: Try to VSync with SGI_swap_control OpenGL extension. Only work on some drivers. Works only with GLX backend. Known to be most effective on many drivers. Does not actually control paint timing, only buffer swap is affected, so it doesn’t have the effect of --sw-opti unlike other methods. Experimental.
# opengl-mswc: Try to VSync with MESA_swap_control OpenGL extension. Basically the same as opengl-swc above, except the extension we use.
# (Note some VSync methods may not be enabled at compile time.)
vsync = "opengl-swc";
# Enable DBE painting mode, intended to use with VSync to (hopefully) eliminate tearing.
# Reported to have no effect, though.
dbe = false;
# Painting on X Composite overlay window. Recommended.
paint-on-overlay = true;
# Limit compton to repaint at most once every 1 / refresh_rate second to boost performance.
# This should not be used with --vsync drm/opengl/opengl-oml as they essentially does --sw-opti's job already,
# unless you wish to specify a lower refresh rate than the actual value.
sw-opti = false;
# Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games.
# Known to cause flickering when redirecting/unredirecting windows.
# paint-on-overlay may make the flickering less obvious.
unredir-if-possible = true;
# Specify a list of conditions of windows that should always be considered focused.
focus-exclude = [ ];
# Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group focused at the same time.
detect-transient = true;
# Use WM_CLIENT_LEADER to group windows, and consider windows in the same group focused at the same time.
# WM_TRANSIENT_FOR has higher priority if --detect-transient is enabled, too.
detect-client-leader = true;
# Window type settings
wintypes:
tooltip =
# fade: Fade the particular type of windows.
fade = true;
# shadow: Give those windows shadow
shadow = false;
# opacity: Default opacity for the type of windows.
opacity = 0.85;
# focus: Whether to always consider windows of this type focused.
focus = true;
Last edited by patrickmaciel (2014-07-26 22:07:58)emeres wrote:Just wanted to make sure. It is also the regular one, not catalyst legacy, right?
I install that (from the arch wiki):
Once you have added some Catalyst repository, update pacman's database and install these packages (see #Tools for more information):
- catalyst-hook
- catalyst-utils
- catalyst-libgl
- opencl-catalyst - optional, needed for OpenCL support
- lib32-catalyst-utils - optional, needed for 32-bit OpenGL support on 64-bit systems
- lib32-catalyst-libgl - optional, needed for 32-bit OpenGL support on 64-bit systems
- lib32-opencl-catalyst - optional, needed for 32-bit OpenCL support on 64-bit systems
So... after that I get:
- Videos in browser (firefox/chrome/chromium) freeze in fullscreen
- Resize windows is slowly
- Teamviewer stop working
- Record screen stop working
- Sometimes I can't see what I'm typing... but after kill compton, everything appears
I try using default compton.conf and "no" compton.conf... same problem.
Sorry for my english
Last edited by patrickmaciel (2014-07-27 01:56:54)
Maybe you are looking for
-
RFC Connection error between R/3 4.7 & ECC 6.0
Hi all, I m receiving the following error when i test the RFC connection between the mentioned systems.. / CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service DEV_W0 file contains the following information: M ********************************
-
I have an old app in my updates but no longer have the app on iTunes and iPhone 4s. How can i remove it? It is beyond annoying, as it constantly has the badge noticfication but can't update the app as it is no longer avaliable. Help!!!
-
I have apple tv and just got mountain lion. It's says I can watch what's on my Mac on apple tv. I would like to watch Dexter from showtime I can watch on Mac would love to stream it to tv if I can
-
Bug in Preview's Exif viewer (inverted GPS coordinates)?
Hi, I've been scratching my head quite a lot over this one... I'm finalizing an application that gets your GPS coordinates off your Google Latitude history and uses them to geotag your pictures. The idea is to make it easier to use the "Places" funct
-
My 5G ipod (video) doesn't sleep. ever. if i hold the pause button, it turns off the screen backlight, which immediately returns when i let go. If i select "sleep" from the main menu, nothing happens. anyone else have this problem? anyone know how to