Request still yellow in manage screen after successful load

Hi ,
I have loaded the data into the cube .The load is init .Even thought the load is successfully load the manage screen shows request still yellow in color. I checked everywhere but did not find relevant setting.
Any help please.
Thanks

Hi,
Chk for any active job in SM37 still going on which is related to this load...
And then under details tab chk under extraction--->is the data selection ended or not?
And chk in the manage screen->Environment(in the menu bar)>Autoimatic request proceessing>set quality status to OK is checked or not?-> Chk this box and refresh....
If u chk all the things are in green and successfull u can manually turn the status into green in the manage screen....then auotmatically the reporting symbol comes if there are no aggregates...
rgds,

Similar Messages

TS3474 my i pod is still on a white screen after restoring with the two buttons and also restoring on i tunes and it still has a white screen

my i pod is still on a white screen after restoring with the two buttons and also restoring on i tunes and it still has a white screen

I've been struggling with mine all morning with the same issue.
Mine would not wake up from sleep (will just white screen).
It will boot using a hard reset (i.e. the power button and volume down button being held down for 8 or so secs). I restored and synced it multiple times but it still has a problem waking up and just just goes to white screen.
I saw a post suggesting a loose connection which I had my doubts about (as it will wake with hard reset) - bit BINGO! If I wake mine (with index finger) whilst applying pressure to the top of the screen area (with my thumbs) it will wake up. When I become frustrated enough I'll take it apart and see if something has become loose.
Hope this helps.

Request Status stays yellow after successful load

We recently started loading two infocubes from the same data source.
- The Monitor shows that the load completed normally with no errors.
- Manage on the first cube shows that the status is green and the data available for reporting.
- Manage on the second cube shows the data is not avaialble and the status is yellow.
There seems to be no problems with the load. I can manualy force the status from yellow to green and the data is available for reporting. But I don't want to have to manully change the status after each load. Any ideas on why the status stays yellow? Any thoughts on what I can do?
Thanks,
Chris

Nagesh,
Looks like your suggestion will solve this. It was not checked for the one that was staying yellow. It was checked for the cube that would go to green. I'll run a test then come back and award points.
Thanks,
Chris

Black screen after successful login into Remote Session

Hi,
I am having windows 8.1 pro(64bit) and windows 7 pro(64bit) machines using which i am trying to connect to a remote VM with windows 7 enterprise through vpn client 5(64bit). After successful login, BLACK SCREEN with Connection bar is displayed. Ctrl+Alt+End
did not work.
In fact, a strange behaviour experienced. After failing once, i tried again with IP address instead of host name. Bingo, it works well. Then disconnect and try to reconnect, problem repeats. What i mean is, the problem is neither Consistent not persistent.
I am frustrated trying to solve the issue. Blogs, forums, communities.... where ever what ever solutions suggested, tried without any luck. Any help please ? Thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that you facing Black screen issue, but when you tried with IP address you can logon to the remote session but during reconnection issue repeats. Correct me if misunderstand your case.
From last how may days you are facing this issue?
Can you find any suitable error\event ID for this case?
For this firstly please check that you have proper connectivity between systems. Please check that you can Ping successfully to the remote system with IP address and hostname.
Might this issue caused by some stopped service “Desktop window manager session” which stop after RDP login. You can check the status as follow.
1. After the issue appear, please use RDP connect to the computer again and check the Desktop Window Manager Session Manager service status.
2. Then, please restar the computer and check System Event log to check if has a Desktop Window Manager Session Manager service error.
Hope it helps!
Thanks.
Dharmesh Solanki

GTX670 - Signal lost/black screen after windows loading icon

Hello,
I hope I am posting this in the correct forum area. If not I do apologize.
Here are my specs:
Board: MSI Z97-G45 Gaming
Bios: ?? whatever pre-installed on mobo
VGA: MSI GTX670 OC
PSU: Corsair HX750 750W
Intel Core i7-4790K
MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
COOLER: Corsair Hydro Series H60 Water Cooler
OC: no overclocking done by me..default settings
OS: Windows 7 64bit Professional
So to keep this as direct and as short as humanly possible here is my situation.
Had a gtx670 card that I had to send back to MSI under RMA. They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug). Last night I removed temporary old card (9800gt) and plugged in new 670gtx. Things seemed to be ok, reinstalled driver after card was recognized. Played one round of Battlefield 4 for testing purposes and all seemed good.
Upon exiting the game things went south in a hurry. Moving the mouse cursor around was extremely slow and choppy. Mouse clicks were not recognized. I could not bring up ctrl-alt-del to get to task manager. At this point the cursor turned to spinning circle as if things were happening. However, after 5+ minutes of nothing changing I did a hard boot.
Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen. This was with the SSD. I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
I can load into Safe Mode with no issues. In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers. The moment I load the Nvidia drivers and restart the computer I then have the issue again. This happens with both drives.
I have reset the video card in the PCI-Ex16 slot and still received the problem. I have tried a different PCI-Ex16 slot and still had the issue. I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives. I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
I'm at a loss at the moment. I think it's the drivers, but could it be the card?
Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers. Could it be as simple as uninstalling or unchecking that particular driver?

Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card. I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
At this point I feel like it has to be the card. The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
What I have done:
1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
4) Flash updated the BIOS on the motherboard to the latest version. No success.
I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD. The problem happens on both drives. Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
I will be sending the card back today on another RMA.

Vista Blue Screen after Successful Boot Camp installation (32 and 64 bit)

OK so there are a number of people with issues relating to the BSoD after a successful (or not) implemetation of Bot Camp and Windows XP and/or Vista. One of the identified problems relates to the NVIDIA GEforce 9600m GT display driver which crashes out AFTER windows performs its update routine.
Having removed and installed the partition (to ensure a clean install each time), the inescapable conclusion is that the NVIDIA driver is to blame for the crash dump, but it is one of the many MS updates that is the root cause of the failure. If you do a clean install of Vista 32 or 64 Ultimate and install the Boot Camp 2.1 (build 1256) and DO NOT allow updates, the system is not only stable, it runs like a train!
I have Contacted AppleCare about this (as my new MBP is only a few days old) and they have not even heard of the problems. NVIDIA have obviously got issues with something as the driver has been updated to a BETA on their web site, but this will not work on a Mac as it cannot seem to find the hardware to allow the update to complete.
If (like me) you have bought an MBP for support issues for both Mac and Windows users, this is a showstopper and one that is about to cause me to ask for my money back. So far, the nice shiny and new MBP is back in its box pending a 140 mile trip back to Exeter from whence it came.
SHARK!

Boot Camp was a response to public challenges at the time to see who could find how to install Windows on a Mac - which is totally okay thing.
Then you want Apple to do more than any normal PC vendor selling a laptop where people have to do things like deal with BIOS, drivers and all the things you have had to deal with, for Windows.
I'm not disagreeing, let alone arguing, I agree that hardware abstraction layer type stuff Apple would need to do. But I don't think Apple needs to do more than get Windows installed. Drivers, AV, and all the stuff that comes with Windows doesn't change. But it should not BSOD when you install something you are told you need.
I wouldn't be surprised though to see Windows 7 eventually support Apple hardware out of the box so to speak.
Cookie cutter answers are part of today's customer experience "level one" is no level at all, but a lot of times - and it takes a lot of work - to translate feedback and problems into "cook book" before you get to the troubleshooting (level 2 and above).
Which is why I read sites like MacIntouch; subscribe to MacFixit (tons of articles on a CD along with shareware). And books.
Nvidia has terrible drivers in OS X on the Mac Pro (workstation) while ATI has had very good drivers and OpenGL support.
I prefer to have more choice and freedom when it comes to drivers. As for engineering and how things get qualified (use to see even SCSI hard drives had to be qualified for both the OS; the controller to be used; driver version; firmware; etc).
What I see is the first shipped BIOS/EFI firmware on any device or system is not the one you want.
Back in the 70's I was introduced to "bleeding edge" but we would get premiere on-site support if we were willing to install, adopt, some new IBM service, software/hardware. And sometimes we were there on Sunday on holiday weekends.
One person just could NOT after doing everything under the sun, get Adobe CS4 to install on their new $5000 Mac Pro 2009. Got a new system, worked perfectly.
In 2008 Early Mac Pro, most all systems would freeze on wake from sleep. Took two months before an EFI update was issued that cured the problem. There is/was also a problem with "inrush current" and PSU.
I had Blue Screen with Vista. Repeatedly.
At first I thought it was a new MICROSOFT 4000 keyboard.
Later I wondered if it was my Apple OEM Nvida 7300GT (and some are failing but it worked in OS X) so I bought 2nd, a PC 8600GTS.
And pull 3rd party PCI Express controllers (FW800, SATA 1x, SATA 8x cards).
Came away and thought "oh, it was the 3rd party card" when that seemed to work.
Around the same time I had bought a new WD Caviar 750GB SATA drive.
It was that drive that would cause problems with Vista after the install.
I thought it was something in Microsoft Windows Update that was causing my personal ****, not my equipment. And MS for their drivers. Somebody else's.
And mind you, I would go through install half a dozen times, try installing Boot Camp before updates, after updates, not at all, add AV software.
I finally -- after a full year -- learned a lot (don't learn from things just working and I still say it has always been "Plug and Pray" PnP ) things work. I know the frustration and aggravation and the wish that things were different somehow.
The BSODs that I got were not from Apple Boot Camp. I even ran my system w/o Boot Camp for six months. And this time, with Win7, everything worked fine, wake, sleep, networking, no need for Apple drivers. At all.
I hang out on a forum where people build their own, X58 board, Intel Core i7, eVGA graphics. And how to get even DDR3 to work, and then how to get the most out of and push it to the extreme, then throttle back a notch.
The nice thing about that is you learn from it, like you do from racing and sports, to build a better mousetrap.
Nvidia is bleeding. Even as they and ATI want to stay on leading edge. Intel is contracting (even as they have their best cpu technology ever coming out) and costs that should go into R&D may be harder to "justify" or all the prototype programmers engineers and testing labs. Everything is more commoditized than ever.
Bottom line: I have Leopard 10.5.6. It has Boot Camp 2.1.2 version, later than the 2.1 download. And there has not been a single update posted online. But my original Leopard DVD 10.5.0 has the SAME contents packaged as 2.0 as were in the 1.4 Beta. I spend $129 for a new DVD to get the latest drivers. Make sense?? of course not.
Oh, and my Mac with 64-bit hardware, cpu, the EFI BIOS is 32-bit so no official support from Apple to install BC 2.1.2 or use Vista 64-bit. Snow Leopard will be 64-bit kernel, require and enforce 64-bit drivers. Should be interesting. Because technically, and logic, would say I don't have a true 64-bit BIOS environment.
Got an iMac? not supported with 64-bit. MacBook 2008 had 64-bit support, but not the "Late 2008" there you need MacBook Pro. And yet everyone wants to address more than 2GB (Apple EFI32 allows access to 3.3GB on some, 1.9GB on others, and in my Mac Pro? limited to 1.9GB memory in Windows.... so you know I don't want to run a Xeon workstation in Windows 32-bit.

Hung on White Apple Screen after successful upgrade to Leopard

After doing an upgrade on my daughters iMac, and the installation saying it was successful, I pressed the button to reboot. It started to reboot, played the little music when it first starts up, and then the white screen with the Apple logo came up with the little circular animation, and then it just hung. No amount of rebooting worked, and I booted into single user mode as well, which worked fine. Then did the fsck, and mount commands to access the file system, but I don't have an application enhancer bundle installed, which was the only post on this forum that seemed to match my problem.
Has anybody seen this, and is there a solution. Right now, the iMac is a brick!
Thanks.

That's an interesting approach. I will have to try it. Actually, I am thinking there might be an easier way. I can boot into single user mode, by holding command-s. If I could eject the DVD, which I cannot do right now, at the command line, then I could try an archive install and see if that works. Is there a way to eject the DVD from single user mode at the command line. I know how to do this under Linux, but the eject command doesn't appear to be there on Darwin.

Why I'm still getting a white screen after Replacing the screen on my iPhone

i just replaced the screen on my iPhone 4 but after I finished , im getting a white screen all the time

Did you replace the screen yourself? If so, then opening the device voids any post-warranty support from Apple, and from the forum. You will need to Google for help, since according to Apple, the iPhone does not have any user serviceable parts.

Weird! RAID icons still in the boot screen after restored them back to norm

I created a software RAID 0 with two 250GB hard disks by using Disk Utility. Installed OSX on them. And I restored them to two separated disks yesterday, Installed OSX on one of them, formated another one for media storage. But weird thing is when I press "alt"key into boot screen, they are still there! Now I have five boot icons- two RAID disks, one OSX, one backup OSX and one for windows. What is wrong with that?? Anyone have the same problem? PLZ help!!!

Thanks BUT problem solved! I reformated the disks using "zero-out" option in Disk Utility and guess what? The stupid icons disappeared!:D "zero-out" formating will take longer than normal formating,about 40 minutes for a 250GB HD.

T60p - Black screen after success bios update

Hello!
I have a big problem:
Today I update my T60p bios to the latest, downloaded from the support site, via the windows based factory utility as usual (I do it more than 4 times before). Everything seems OK, but after restart the notebbok won't start. The sysfan is spinning, the leds are lights, but the screen is black, and no reaction for any keypress.
How can I fix this problem?
Thank's for help,
Peter

Hello,
first you could take out your battery and press powerbutton 10 times.
Insert your battery again and try to start.
If your cd drive is running, I would suggest to download bios as an iso-file and burn it to disk.
Then try to boot with this cd and flash bios again.
If these methods don´t work, than you´ll have to send it to service.
Good luck!
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Video driver issue - black screen after XP loads

I've used Bootcamp to run Windows XP on my Macbook for the past year. No major issues up to this point...
Today I decided to update my graphics drivers on XP because I was going to install Starcraft II. I went to Nvidia website and it auto-detected the newest drivers...258.96 to be exact. After installation I restarted computer and booted up in XP again, this time the graphics were all messed up and it wouldn't let me switch to 32bit mode or a high resolution. I re-installed the drivers...booted up again..this time the desktop loaded but the screen was black. I do not know how to remove the drivers and revert to older ones since I can't see anything on the screen. All the sounds work when I start it up and power it down...files still there (can see files on HD when in OSX)...so I know it's just a graphics issue.
How do I revert back to a "more compatible" driver?

Hi and welocme to Discussions,
use the SafeBoot options of XP as described here http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11
Use Safe Mode (=Minimal) to startup XP with a minimal set of drivers and from there uninstall the not-working Nvidia drivers.
The reinstall the drivers that worked.
You might wanna tryout if 'Last Known Good Configuration' works.
Regards
Stefan

White Screen after Default loading image

I am getting a white screen for about two seconds between the Default.png loading image and the app main screen in my Flex app on my iPhone 4. Is there any way to tighten that up a little or get rid of it entirely?

Its probably just lagging while it loads your content. You can toss on a simple loading screen and that can hold the user over while the rest of the content is loaded. Also the beauty of flash and I assume flex is that you can use layers so you can have your content load and build underneath the loading screen and then simply reveal it.

HT1414 still has white screen after restore

I still have a white screen after restart and restore

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

I'm trying to add my Linux netbook to my sync account but both my windows computers will not show the "Add Device" button in any of the sync management screens

I'm trying a new Linux build on a net book that I use for playing with non windows OS. In the process of setting up the fresh OS install I wanted in get my Firefox account set up to that I didn't have to spend lots of time working on that one thing. I'm no stranger to the browser sync and have attached several of my computers and tablets with a number of different OS to the account with little trouble including the Firefox of the previous Linux build that was on the net book. The problem now is that on both of my to main computers, a windows 7 desktop and a windows 8.1 tablet, both running the latest Firefox, I am unable to find the "add device" button in any of the sync management screens. This includes the browsers built in options screen as well as the Firefox manage account page. The first gives me options for disconnecting the account, going to the manage screen, several check boxes for what can be synced, and the device name. The manage screen, after logging in, only give me options for signing out, changing password, and deleting the account. Any help figuring out why the add device button seem to be missing from both these devices would be greatly appreciated.

Please check your Firefox Installation's version. (can be found by clicking the main menu, either clicking or hovering over the help button, and then clicking about firefox in the sub menu). depending on how long ago you set up sync you may still be using the older sync version. firefox 29 introduced a new (and might i add far less tedious) sync version. see [[How to update to the new Firefox Sync|this Mozilla support article]] for information on upgrading your sync to the new version.

IPod 4th Gen has white screen after replacement, and restore

Okay. Here's the problem. A while ago, I dropped my iPod, and it's screen cracked. I've been living with it ever since perfectly, but just with a cracked screen. Now, I ordered a new screen, and I begin to replace it. I knew how, and like an easy job, I did it pretty quick compared to others. After both ribbon cables where in, I pressed the lock button, and my iPod had a white screen. I was a little worried about that, so, I tried to reattach the screen. Now it was just black, after even using the home and lock button restart method. Eventually I got it back up and to the white screen by draining the battery and recharging, and there I was again, stuck. I looked at some forums on the internet to try to see if anyone had my problem. After clicking on the first link, it turns out, alot of people had this problem as well as me. The solution they said was pressing the home button and lock button for about 10 or so seconds, and then it goes to the apple screen and is all better again. I tried it, and my home button broke. Great. So, now I had to use the little button that the home button was pressing down to try the solution. Tried it, and, nothing. Still the blank, plain, white screen. Looked some more and saw that pressing the home and lock buttons along with the volume up button worked for some people too. Tried it, worked just as good as the previous one. Nothing. I even tried some person's idea of doing home, then volume up, then lock, in different timed stages. Nothing. I also saw people begging for them not to restore their iPods and begging for a solution. I was fine with a restore, I just had games that I played on my iPhone as well. So, I went with it, and restored it, without any backups, just going to factory mode. Afterwards I heard my iPod make the iOS "plugged in" sound, and anxiously tried the lock button. Still had the white screen. STILL. Now, I'm here, begging for a solution like others, with an iPod that won't function properly. Can someone please help me?

No nothing like that happened, I'm sure, but I actually spent the day looking for a fix. Luckily, I had the idea of taping the spring down because I though the screen didn't touch it. Turns out I was right, but however, I found out that the screen I ordered was broken in a way, because it still had the white screen after the taping. Just to make sure, I tried the other screen to clarify if the taping worked or not. I did the home and lock button restart, and up popped the apple logo. So, that means that the screen I got from the seller was either a rip-off, or was just broken somehow in process of making, or delivering in some matter. Unfortunately, I think I can't ship it back unless for alot of money because the person I got it from comes from China. I live in the USA. So that's gonna be a matter to work with myself. Thank you for trying to help.

Request still yellow in manage screen after successful load

Similar Messages

Maybe you are looking for