Requiment for Database installation memory and diskspace

hi
Any one have knowledge about Oracle database installation requirement for memory and hard disk space version wise from 2001 to 2010
thanks in advance
regards

The hardware (memory, cpu, disk) requirements for Oracle varied by version and platform. The requirements were listed in the platform specific installation manuals.
If you want to compile a history or chart of requirement changes you would need to get the mentioned platform specific installation manuals and look there.
HTH -- Mark D Powell --

Similar Messages

Urgent Help is Needed for Database Installation Problems

How can we resolve the following database problems in Windows XP? Originally, we had Oracle 10.1.0.4.2, and we wanted to upgrade it to Oracle 10.2.0.1. We uninstalled Oracle Home ORAH1_DEV and then got the following problems while installing Oracle 10.2.0.1. How can we resolve all these errors so database configuration assistants can work successfully? Please help us with these ASAP. Thank you very much for your help and time in advance.
-Oy
These are the popup message we got.
POPUP 1. This appears 3 times, then ignore
Error in writing to file 'C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll'.[C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll(The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 2. Error in writing to file 'C:\OraHomes\ORAH_DEV\jdk\bin\java.exe'. [C:\OraHomes\ORAH1_DEV\jdk\jre\bin\java.exe (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 3. Erro in writing to file 'C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll'. [C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 4. Error in writing to file 'C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll'. [C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 5. Error in writing to 'c:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb'. [C:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel

Grace wrote:
Yes, I have it installed in the same Oracle Home. Is it possible to create it there? Or I must create a new Oracle Home for the new installation? Please reply as soon as possible. Thank you very much for your help.
-OyA specific ORACLE_HOME holds the binaries for a specific version of Oracle. You don't upgrade by simply installing a newer version of Oracle into the ORACLE_HOME of an older version. If you tried to do that you have probably irreversibly corrupted the original installation.
And there is no URGENT or ASAP here. We are all volunteers with regular jobs. If you have "urgent" support issues you need to open a Service Request with Oracle Support.

My Oracle Support Communities for Database Installation issues

The My Oracle Support Community which covers all support related questions on Database Installation is available here:
https://communities.oracle.com/portal/server.pt/community/database_install/278
The My Oracle Support Community is a vibrant forum for Oracle customers, partners, and employees to share knowledge, discover best practices, and ask questions. We encourage you to use these communities for all your support related topics.
With over 427,000 members and 227 communities dedicated to product and industry-specific topics, the My Oracle Support Community encompasses a huge range of technologies, applications, and business processes—including 30 focused communities for Oracle Database, 6 for Enterprise Manager, 4 for Engineered Systems, and more.
Join a community of peers with real-world experience using Oracle products, and Oracle support engineers who moderate and contribute to discussions, for unparalleled access to deep and practical expertise. With My Oracle Support Community, you’ll get access to information about Oracle technologies to help you improve your operational efficiency and reduce downtime.
An existing support contract is required to access the My Oracle Support Community.
If you have not used the My Oracle Support Communities before, please watch this brief (2 minute) video to help you quickly understand the benefits available to you.
http://bcove.me/rvjqwdn5
Edited by: rgulledg on Jul 11, 2012 12:17 PM

Please note that an existing support contract is required to access My Oracle Support. The original text has been updated to reflect this.

Hana is a Database or Memory and why BW on Hana?

Dear Experts,
I have read few documents regarding Hana and I am confused?
Following is my understanding. Correct me if I am wrong in my understanding?
1. I believe Hana is a database(a different kind of data base with Software and hardware) which stores the data and is very fast.
This Hana Database comprises of both Drive and Ram. Hana's Drive is for storing the Data permanently and Hana's Ram is where the full data from Drive is transferred to Ram and in-memory calculation happens which is very fast.
2. I read that we can have 2 options,a Standalone Hana which reads data from SAP ERP and BW on Hana. Why do we need to have BW on Hana, we can just have Hana itself right, because even without BW its faster?
Please correct me if I am wrong.
Regards
Sam

A) hana is a database, which combines memory and technology.
A common hana server has at leaste 128gb ram. why? because the tables (or columns of that tables) are loaded in memory and are consumed from there. Hana uses compresion (1:11 ratio) and use columnar tables, because it speeds up the data reading from the database.
Hana have 3 parts of storage:
1) memory (explained above)
2) data: the disk where data is recorded
3) log: the disk where the last transactions are logged and it provides with recovery fails
B) you can have diferents scenearios (I will explain some of them):
BW on hana: it speeds up the data access due to hana technology
suite on hana: ERP and BW on hana
Hana has your DW database: you can use hana like a common database and benefits your organization with the speed of hana.
hope it helps.
this image can show you the diferents scenarios
http://esj.com/articles/2014/07/25/~/media/ECG/VirtualizationReview/Images/2014/07/0714vrm_hana.png

Macbook Pro for HD video -memory and external hard drive questions?

Hi!
I am a Macbook user, but I plan to purchase a Macbook Pro since I am now doing a lot of HD (not HDV) video editing. I live outside of the U.S. and cannot call the Apple Store, so was wondering if anyone can provide advice on the forum.
I'm interested in either the 15-inch: 2.53GHz or 15-inch: 2.66GHz. is there a big difference in speed between these?
-Is the 4GB memory the MBP comes with enough for HD video editing purposes, or would I opt for the 8GB? (here prices becomes a bit of an issue)
- Is the 500GB Serial ATA Drive @ 5400 rpm sufficient or would I upgrade to the 500GB Serial ATA Drive @ 7200 rpm [Add $50.00]
-I want to purchase an external firewire drive to store my media on-does anyone know if the G-Raid 500 would be good? Portability is a big issue for me since I travel very often.
Thank you all so much for your help!!

I looked at the 15inch and 17inch but chose the 17inch - and I am a filmmaker. I too travel on location extensively and usually carry a 15inch due to size-weight - but the 17inch is much better for HD. The video card and screen resolution in the 17inch is much better than than the 15inch but what clinched it for me was the 17inch has a CF reader and the 15inch only has a small SD card reader.
Most video HD cams are shooting straight to CF cards now.
I also upgraded to the 7200 rpm drive - a wise choice for $50 extra.
Yes 4G ram will run Final Cut OK - but if you go from FCP to motion a lot then you will need 8G.

Best Practice For Database Parameter ARCH_LAG_TARGET and DBWR CHECKPOINT

Hi,
For best practice - i need to know - what is the recommended or guideline concerning these 2 Databases Parameter.
I found for ARCH_LAG_TARGET, Oracle recommend to setup it to 1800 sec (30min)
Maybe some one can guide me with these 2 parameters...
Cheers

Dear unsolaris,
First of all if you want to track the full and incremental checkpoints, make the LOG_CHECKPOINT_TO_ALERT parameter TRUE. You will see the checkpoint SCN and the completion periods.
Full checkpoint is being triggered when a log switch happens and checkpoint position in the controlfile is written in the datafile headers. For just a really tiny amount of time the database could be consistent eventhough it is open and in read/write mode.
ARCH_LAG_TARGET parameter is disabled and set to 0 by default. Here is the definition for that parameter;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams009.htm
If you want to set this parameter up the Oracle recommends it to be 1800 as you have said. This can subject to change from database to database and it is better for you to check it by experiencing it.
Regards.
Ogan

Which flavour of Linux to choose for database 9i Rel2 and 9iAS rel2

I am getting the Oracle 9i rel2 and 9iAS rel2 from OTN (OTN Tracks) for Linux.
I wih to know what flavour of Linux to choose (Red Hat or Suse).
Again this is only for my own PC.
Any suggestion?
Thanks,
Dhananjay

Thank you! Do I need to apply any special O/S patches first?

Exadata Database installation and administration documents please

I want to learn more about Exadata. Please anybody share the exadata database installation steps and administration documents.
Appreciate your reply.
Thanks in advance

Hi
you can find all the documentation for Exadata on the OTN site : http://www.oracle.com/technetwork/database/exadata/index.html
However sorry to disappoint you as of now Oracle does not allow any installation or configuration to be done by yourself on the Exadata box hence there is no document with regard to installing and configuring the Exadata. But creating or adding new instances you can do with the DBCA wizard.
Regards

Transaction for monitoring memory and resources on BW server

hi experts
I have the task to determine what occurred from an hour specified on few minutes, because there was a process or program ( we don't know ) which collapse memory and resources on BW server. I check throw SM37 if some Job was executed but no one was. I need a transaction for monitoring / checking memory and resources.
Please I will appreciate any helpfull information.
Regards
mgg

Hi
You can use ST03 / ST03 N also check ST04, ST06 . If you have access to the service market palce please check SAP Note - 618868 ( FAQ: Oracle Performance ) and related notes for more help.
Hope this helps
Assign points if useful
Regards

Does the Satellite A300/M00 has room for Intel Turbo Memory?

Hello,
My question is, "Does the A300/M00 have room for Intel Turbo Memory and if so is there a tutorial to placing the module in".
Regards,
Matthew Gill.

I dont think it does. Intel dropped the Robson cards earlier this year due to the lack of performance benefits.

Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install first developer suite or database????

Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.

you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database.

SQl Server Installation failing for Database Engine and Its Services

Hi,
I was trying to install SQL SERVER 2008 R2 on VM having 500 GB hard disk and 16 GB RAM.
OS is Windows Server 2008
But it fails for Database Engine.
Installation Details are as Below.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-10-13 18:41:01
End time: 2014-10-13 19:26:32
Requested action: Install
Log with failure: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x476BF04A%400xBB814387
Machine Properties:
Machine name: KVS-IN-WFAN092
Machine processor count: 4
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: di-softwareSoftwaresSQLSQL_2008_R2_Enterprisex64setup
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITYNETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITYLOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:Program FilesMicrosoft SQL Server
INSTALLSHAREDWOWDIR: C:Program Files (x86)Microsoft SQL Server
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:Program FilesMicrosoft SQL Server
INSTANCEID: SQLServer
INSTANCENAME: SQLSERVER
ISSVCACCOUNT: NT AUTHORITYNetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITYNETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: KRONOSENGsuperuser
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354SystemConfigurationCheck_Report.htm
And Error in log file are maily as below.
2014-10-13 19:26:27 Slp: Completed Action: SqlBrowserConfigAction_install_Startup_Cpu32, returned True
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11
dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "SqlBrowserConfigEngAction_install_Startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlBrowserConfigEngAction_install_Startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "SqlEngineConfigAction_install_startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlEngineConfigAction_install_startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant
features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "AgentInstall_AgentInstallStartup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: AgentInstall_AgentInstallStartup_Cpu64 The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant features. The feature is tested for results:
ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64. There
are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature
is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "FulltextConfigAction_install_startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: FulltextConfigAction_install_startup_Cpu64 The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature is tested for results:
ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There
are 11 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are
2 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64.
There are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features.
The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Completed Action: PostMsiTimingConfigAction, returned True
2014-10-13 19:26:27 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
2014-10-13 19:26:27 Slp: ----------------------------------------------------------------------
2014-10-13 19:26:27 Slp: Running Action: ExecuteExtendedTimingsWorkflow
Thanks,
Mahesh

I have uploaded detail.txt at below url.
http://m.uploadedit.com/b041/1413264342685.txt
Hi Mahesh,
According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
For more details about this error, please review the following similar thread.
http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
Thanks,
Lydia Zhang

Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?

TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64)
Command> dssize;
PERM_ALLOCATED_SIZE:      51200000
PERM_IN_USE_SIZE: 45996153
PERM_IN_USE_HIGH_WATER:   50033464
TEMP_ALLOCATED_SIZE:      2457600
TEMP_IN_USE_SIZE:         19680
TEMP_IN_USE_HIGH_WATER:   26760
Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?
tried to use ttsize function, but it gives some senseless results – for example, for the biggest table, tokens, it produces following output (that this table is 90GB in size – what physically cannot be true):
Command> call ttsize('tokens',null,null);
< 90885669274.0000 >
1 row found.

Are you able to use the command line version of ttSize instead? This splits out how much space is being used by indexes (in the Temp section of the TT memory segment), which I think is being combined into one, whole figure in the procedure version of ttSize you're using. For example:
ttSize -tbl ia my_ttdb
Rows = 4
Total in-line row bytes = 17524
Total = 17524
Command> create index i1 on ia(a);
ttSize -tbl ia my_ttdb;
Rows = 4
Total in-line row bytes = 17524
Indexes:
Range index JSPALMER.I1 adds 5618 bytes
Total index bytes = 5618
Total = 23142
Command> call ttsize ('ia',,);
< 23142.0000000000 >
1 row found.
In 11.2.2 we added the procedure ttComputeTabSizes which populates system tables with detailed table size data, and was designed to be an alternative to ttSize. Unfortunately it still doesn't calculate index usage though, and it isn't in 11.2.1.

Requirements for database design and installation

Hi,
As a database administrator, how to find out whether the database is design and installed properly?
Can you please what would be the requirements to be considered towards the databse design for application developer ?
thanks heaps !!!!

Mohamed ELAzab wrote:
regarding that the number of execution is the main thing that affects the performance i said that already above " the application executed it 30 000" but you didn't read my answer correctly. I did not respond to that "answer" of yours as it was not part of your posting that I responded too. In your response, which I quoted, talked about non-sharable SQL retrieving 20 rows and after 3 years it retrieving a million rows. This has no bearing on whether the SQL is sharable or not.
I don't agree with you regarding that the design is not being done regarding considering the performance bottlenecks.So you decide on what the bottlenecks are up front, and then use these as database design considerations? I fail to see any logic or merit in such an approach.
i want to let you know that we in the telecoms environment have many problems in our databases because the people who designed those applications didn't take performance in consideration.I understand too well - and it is not that they did not take performance into consideration when designing the database, it is because the design is just plain wrong from the start.
You do not need to consider amount of memory available, number and speed of CPUs, bandwidth and speed of the I/O system, in order to design a database. These have no relevance at all during the design phase. Especially as the h/w that will run the design in production in a year's time can be drastically different from the h/w that will be used today.
No, instead you use a proper and correct design methodology and data modeling approach. Why? Because such a design by its very nature will make optimal use of h/w resources and will provide data integrity, scalability and performance.
Again i think design of the database application must take database performance bottlenecks in consideration like application which doesn't use bind variables if they took into consideration to avoid that it will help the DBA in the future but unfortunately most people doesn't do that. And as I said - using bind variables or not has absolutely nothing to do with the basic question asked in this thread: "+what are the requirements of database design+".
How does using/not using bind variables influence the design of a table? Determine whether an entity is in 3NF? What the unique identidiers are for an entity? These are the design considerations for a database.. not bind variables.
Yes, SQLs not using bind variables can cause performance problems. Not paying the electricity bill can cause a power outage for the database server. So what? These issues have no relevance to database design.

The transaction log for database 'ECC' is full + ECC6.0 Installation Failur

Guyz,
my ecc6 installation failed after 8 hours run with following error log snippet...
exec sp_bindefault 'numc3_default','SOMG.MSGNO'
DbSlExecute: rc = 99
(SQL error 9002)
error message returned by DbSl:
The transaction log for database 'ECC' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
(DB) ERROR: DDL statement failed
(ALTER TABLE [SOMG] ADD CONSTRAINT [SOMG~0] PRIMARY KEY CLUSTERED ( [MANDT], [OBJTP], [OBJYR], [OBJNO] ) )
DbSlExecute: rc = 99
(SQL error 4902)
error message returned by DbSl:
Cannot find the object "SOMG" because it does not exist or you do not have permissions.
ECCLOG1 data file has got 25GB initial size and growth was restricted to 10% (PROPOSED BY SAPInst)...
i'm assuming this error was due to lack of growth space for ECCLOG1 datafile...am i right? if so how much should i allocate memory for this log ? or is there any workaround ?
thanks in advance

Kasu,
If SQL is complaining that the log file is full then the phase of the install that creates the SQL data/log files has already occurred (happens early in the install) and the install is importing programs, config and data into the db.
Look at the windows application event log for "Transaction log full" events to confirm.
To continue, in SQL Query analyzer try:
"Backup log [dbname] with truncate_only"
This will remove only inactive parts of the log and is safe when you don't require point-in-time recovery (which you don't during an install).
Then, go to the SQL Enterprise manager, choose the db in question and choose the shrink database function, choose to shrink only the transaction log file and the space made empty by the truncate will be removed from the file.
Change the recovery mode in SQL Server to "simple" so that the log file does not grow for the remainder of the install.
Make sure you change the recovery mode back to "full" after the install is complete.
Your transaction log appears to have filled the disk partition you have assigned to it.
25GB is huge for a transaction log and you would normally not see them grow this large if you are doing regular scheduled tlog backups (say every 30-60 minutes) because the log will truncate every time, but its not unusual to see one get big during an install, upgrade or when applying hotpacks.
Tim

Requiment for Database installation memory and diskspace

Similar Messages

Maybe you are looking for