Require Transfer a Field value of CRM to a Field in ECC system

Hi All,
We have a requirement where in
Each time when a business Partner data is saved on the BP Tcode screen in CRM,
CRM Table BUT0IS Field IND_SECTOR need to be mapped to ECC Table KNA1 Field BRAN1 based on condition that table BUT0IS field ISDEF = u2018Xu2019 in CRM.
In CRM, By debugging the function modules we could see that the BDoc is carrying the IND_SECTOR field but not able to find ISDEF (checkbox) field.
We would like to hear what are the required steps to populate this field in the Bdoc Structure and also how to debug the entire flow of middleware till ECC (i.e. the function modules called in ECC to update the database tables).
Kindly request to let me know as to how can we achieve this?
Thanks and Regards.

Similar Messages

State machine custom task workflow how to pass one task field value to the next task field

i am using ItemMetadata.xml to pass value from list to custom task first value its passing the but second value is showing as null
plus how to pass one custom task value to the next custom task
i.e one supervisor approver comments submitted field i want to see on department manager approval custom task which is the next approver from supervisor
ows_firstfield=""
ows_SecondField=""
the above ows fields are from list
in this i am unable to retrive the second value in the task form this is my first query?
second query is that how can we pass one task field value to next approver task field value?
any idea
MCTS,ITIL

What type of workflow is this? IS this Visual Studio or SharePOint designer or third party (K2, Nintex, etc...)? YOu should be able to get ahold of the task that was edited via the correlation token, and then grab any value you want from that
task (wether it be a custom field or a standard worfklow task field).
It would help to know what you are using to build the workflow.
Thanks!

How to adde New Language field value in CRM Business Partner Language Field

Dear all,
How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
Your suggestions will be highly appreciated
Thanks
Sravanthi

Hi Shravanthi,
You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
Regards,
Rishu.

How to assign custom tab field value to corresponding standard tab field value.

Dear friends,
I want assign a field value ( advice code , advice code description ) in a custom tab to corresponding field value in standard tab (advcode ,). in me51n.
following screen shot are given below

Hi SK,
It looks both the tabs are custom ones. In that case, you can either use Export/Import statement or you can use Set/Get Parameter ID for setting value.
If one is standard subscreen, you can export value from custom subscreen and use line item level user-ext/enhancement to assign the value on standard subscreen.
Hope this helps.
Regards,
Naveen

Change field value in CRM complaint header

Dear All,
We are trying to find a way to update the ref. field in the complaint header with external data from R/3 online.
please help!!!!!!!!!!!!!!
Thanks,
Natali

Hello Natali,
Could you give us more details?
When do you want to do this update? During a complaint process in transaction CRMD_ORDER or in background?
Regards,
Frédéric

Setting default field values for multi-line text fields in lists?

For the multiple lines of text field in a list, I'm using SharePoint Designer 2013 to set a default
value for the field, but I need that default value to include rich text formatting (the default value includes a formatted table). Is this possible without having to delve into JavaScript? And if so, how?

Yes, we can :)
You can do it with powershell
$web = get-spweb <yourweb>
$list = $web.lists["<yourList>"]
$field = $list.fields["<yourField>"]
$field.DefaultValue = "place your html code here"
$field.update()
hope that helps

"Modified By" Field Value is same "Created By" field value after the workflow completion.Sp 2010 workflows

Hi All,
I have a work flow A attached to List List1
I have Added an item(now created by and modified by are same)
Next Person B modified
Ideally created by value and modified by value should be different, but they are same after the workflow completion
This is very strange as i am not modifying modified by field any where
Please let me know any one has faced similar problem
Thanks
Ravi
Ravi

The workflow will run as the person who initiated it. As such if the workflow starts when an item is created then it'll be running as the user who created the item.
When the workflow changes anything the 'modified by' field will be updated to show the identity the workflow is running under. I think that explains your behaviour?
To change it you could use an impersonation step but that would simply replace one name with another. I don't think you've got access to the 'SystemUpdate()' method in workflows which would allow you to avoid updating the modfiied by and modified date fields.

Set lookup field value based on another lookup field using Infopath 2010 rules

Hello,
I created 3 lists in SharePoint 2010: Lists A, B and C. The lists B and C where create to work as a drop-down fields in List A. My question: How to I set field C automatically based on what is selected on field B using Rules in Infopath 2010?
I don't know what to put in the third field:
Thanks,
Elvis

It looks like you edited the question since you first asked it. When I posted my first answer, there were no screenshots in your question and it was not easy to figure out what you want to achieve.
I asked for clarification. You did not reply to my post.
Instead it seems that you edited your question and added more detail. This is good, because it helps people to understand what you are asking.
But when you change a post (YOUR QUESTION) that others have already replied to, you must acknowledge these replies and let people know that you are posting new information.
In this forum, people get emails when there are new replies to a question. That's how I found back to this thread. I do not get an email if you edit your question to add more information.
So, don't be surprised if you edit your question and people still don't respond. The people why have already replied to your question will not be notified if you make changes to your original question.
If you want to make sure that everybody who is interested in your question gets notified about new information, please add the information in a new comment to the question, or edit the question and then post a new comment "I added more details".
This way, everybody already subscribed to your question will be notified about the new content and can help you find a solution.
cheers, teylyn

To transfer Selection Screen field value from a program to another Program

Hello,
Program Z_ABC having Select Option Field XYZ.
I need to transfer all the values entered on Selection Option Field XYZ to another Program Dialog Z_DIALOG.

Hi,
Try to use the function module 'RS_REFRESH_FROM_SELECTOPTIONS'.
For ex:
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
       EXPORTING
            curr_report     = sy-repid
       TABLES
            selection_table = it_soptions
       EXCEPTIONS
            not_found       = 1
            no_report       = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SUBMIT riaufk20 WITH dy_selm = 'D'
                  WITH SELECTION-TABLE it_soptions
                  AND RETURN.
Hope it solves your issue.
Regards,
Chenthamarai.

Require field be filled out when other field values change

I tried to search on something I need to do but couldn't come up with a combination of words to find much.
I have a situation where, when certain field values on a form are changed, I need a comment field filled in. So if one of the designated field values change and the comment field is NOT filled in, I would like some kind of message indicating that the comment field must be filled in when that field is changed. This would preferably happen when the 'Update' button is pushed on the form. And this would need to happen before the data is submitted.
This seems to be somewhere between a validation and a Dynamic Action. I'm not sure how to go about creating what I need. Any help would be greatly appreciated! Hopefully I have described the scenario well enough.
Thanks!
John

This did the trick! I created the hidden item, then created a dynamic action that would set the value of the hidden item to 1 if the field changed (action = 'change'). Then I created a validation on my 'comments' field to check if it was NOT NULL when the 'Apply Changes' button was pushed, with a condition of the hidden item = 1.
One thing extra - I had to set the dynamic action so that it did NOT fire on page load. Otherwise it would set the hidden item to 1 when the page loaded after clicking the "Apply Changes' button.
So, thanks!
One other question - I have a lot fields on this form. All of them have this requirement except for a few buttons. Is there any way to list the fields NOT to look for a change. In other words, in the Dynamic Action section, in the WHEN section, is there a way to designate items NOT to look for a change?
Thanks for the help!
John

Selection screen field value capturing

Hi,
I have developed a report for displaying amendment changes in a purchse order. The input are purchase order
and plant. Now they have asked for an additional input of version field, which should also have F4 field-value help.
For version field, default there is no F4 key. So, i have written code like after entering the PO number when we press the enter key, for the corresponding PO, it brings the version no in input field. But my problem is it is displaying the values for version field, but when i select some value it is not getting updated in selection-screen version field. I have attached my code below... please help me
in the below code my problem is only between
AT SELECTION-SCREEN on value-request for P_REVNO.
and
start-of-selection event...
TABLES : ekko,
ekpo,
cdhdr,
cdpos,
MEPO1325,
t001,
t166c,
t166t,
adrc,
komp, " net rate of header
konv, " net value of purchase order
zammendpodet.
TYPES : BEGIN OF ts_cdpos,
ebeln TYPE ekbe-ebeln,
ebelp TYPE ekbe-ebelp,
matnr type ekpo-matnr,
maktx type makt-maktx,
prdat type ekpo-prdat,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
tkey(70),
txz01 TYPE ekpo-txz01,
ctxnr TYPE t166c-ctxnr,
desp(20) type C,
MEINS LIKE MARA-MEINS,
chtxt TYPE t166t-chtxt.
INCLUDE STRUCTURE cdpos.
TYPES : END OF ts_cdpos.
data : begin of it_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of it_makt.
data : begin of it_maRA occurs 0,
matnr like maRA-matnr,
mEINS like maRA-mEINS,
end of it_maRA.
*Internal table declartion
DATA : it_erev TYPE TABLE OF erev WITH HEADER LINE,
it_ekko1 type table of ekko with header line,
it_konv2 type table of konv with header line,
it_ekpo TYPE TABLE OF ekpo WITH HEADER LINE,
it_ekpo1 TYPE TABLE OF ekpo WITH HEADER LINE,
it_cdhdr TYPE TABLE OF cdhdr WITH HEADER LINE,
it_t166c TYPE TABLE OF t166c WITH HEADER LINE,
it_ekbe TYPE TABLE OF ekbe WITH HEADER LINE,
IT_AMMEND TYPE TABLE OF ZAMMENDPODET WITH HEADER LINE,
IT_AMMEND1 TYPE TABLE OF ZAMMENDPODET WITH HEADER LINE,
it_komp TYPE TABLE OF KOMP WITH HEADER LINE,
it_konv type table of konv with header line,
it_konv1 type table of konv with header line,
it_cdpos TYPE TABLE OF ts_cdpos WITH HEADER LINE.
data : BEGIN OF it_erev1 occurs 0,
revno TYPE erev-revno.
data : end of it_erev1.
data : begin of it_cdpos1 occurs 0.
include structure cdpos.
data : ebeln like ekko-ebeln,
item like ekpo-ebelp,
aedat like ekpo-aedat,
matnr like ekpo-matnr,
txz01 like ekpo-txz01,
desp(20) type C,
MEINS LIKE MARA-MEINS,
item1 like ekpo-netpr.
data : end of it_cdpos1.
types : dy_temp TYPE lips-lgort.
DATA : dyfields LIKE dynpread OCCURS 1 WITH HEADER LINE, dy_value TYPE dy_temp.
DATA: progname TYPE sy-repid,
dynnum TYPE sy-dynnr,
dynpro_values TYPE TABLE OF dynpread,
field_value LIKE LINE OF dynpro_values.
*Work variable declaration
DATA : v_revno TYPE erev-revno,
revno1 type zammendpodet-revno,
w_version TYPE erev-revno,
w_erdat TYPE erev-erdat,
w_eruhr TYPE erev-eruhr,
wv_eruhr TYPE erev-eruhr,
v_tabkey TYPE cdpos-tabkey,
v_temp(5),
v_olddate(8),
v_newdate(8),
v_value_old TYPE cdpos-value_old,
V_OLD TYPE EKPO-BRTWR, " OLD VALUE FOR PURCHASE ORDER
l_ind TYPE i,
temp value 0 type i,
temp1 type i,
temp2 type i,
temp3 type i,
wa_cdpos like line of it_cdpos,
wa_cdpos1 like line of it_cdpos1,
v_tabkey1 TYPE cdpos-tabkey.
PARAMETERS : p_ebeln TYPE ekko-ebeln,
p_ebelp TYPE ekpo-ebelp.
p_bukrs TYPE t001-bukrs,
p_revno type erev-revno.
INITIALIZATION.
AT SELECTION-SCREEN on value-request for P_REVNO.
CLEAR: dyfields[], dyfields.
dyfields-fieldname = 'P_REVNO'.
APPEND dyfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
TABLES
dynpfields = dyfields.
READ TABLE dyfields INDEX 1.
SELECT revno
FROM erev
INTO TABLE it_erev1 WHERE edokn = p_ebeln.
IF sy-subrc = 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'REVNO'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'P_REVNO'
value_org = 'S'
TABLES
value_tab = it_eREV1
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
START-OF-SELECTION.
SELECT SINGLE *
FROM t001
WHERE bukrs EQ p_bukrs.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
WHERE addrnumber EQ t001-adrnr.
ENDIF.
SELECT SINGLE *
FROM ekko
WHERE ebeln
EQ p_ebeln
AND frgke = 2.
select * from konv into corresponding fields of table it_konv where knumv eq ekko-knumv.
useful informations will be rewarded.
thanks and regards,
subbu.,

Hi ,
       Use this function module
    call function 'DYNP_VALUES_UPDATE'
      exporting
        dyname               = sy-repid
        dynumb               = sy-dynnr
      tables
        dynpfields           = t_dynpfields
      exceptions
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        others               = 8.
where t_dynpfields would contain name of field and value you want to update.
Please reward if useful.

Want to hide the drop down based on text field value

Hi,
I want to hide some of the values in drop down based on one text field value.
I have the field called name which has the value A, B, C, D and also one drop down list which has the values 1,2,3,4,5,6. I want to hide the some of the values in drop down based on A or B or C. Let say, If it is A, drop down value should be 1,3,5. If it is B, Drop down value should be 1,2,3,4. Like this for every record.
Can you please help me out.
Thanks
Ram

Hi Robert,
I am trying it in two different way. Please suggest which is the right one and feasible.
1) I have the drop down list which has all the status. I am trying to hide the drop down values based on one text field value for all records.
2) I have collected all the drop down values into table in webdynpro method. Rightnow I have two tables.
one has line items details and another one have drop down values. both tables having common fields.
I have to show second table values for that particular key, move all of them to drop down.
Which is the best and feasible option.
Thanks
Ram

Dialog progg....(matching Field values from Table)

Dear All,
                 I have one screen 0100.
At any stage, a field value entered in the screen field by user, should be matched from say EKBE table value with tolerance of 10-15%.
If it doesn't matches, Error message should display in a dialog box.
Any suggestions, pls.
Thanks in Advance

Hi,
In PAI we can do this validation.
example :
In screen flow logic add CHAIN ..... ENDCHAIN and a module to validate the field
PROCESS AFTER INPUT.
CHAIN.
    FIELD g_banfn.
    FIELD g_bnfpo MODULE validate_g_banfpo.
ENDCHAIN.
And in Module validate according to your codition.
MODULE validate_g_banfpo INPUT.
* Validation.
Select ....
from ekbe
where some field = entered field on screen (e.g p_number)
IF sy-subrc <> 0.
* if entered value is not present in table give an error message.
    MESSAGE e133.
ENDIF.
ENDMODULE.                 " VALIDATE_G_BANFPO INPUT
thanks.
Edited by: Dhanashri Pawar on Dec 2, 2008 12:48 PM

Planning function to change date field value in layout

Hello experts,
I have 1 BPS layout with 2 date fields ( Start date, End date ). With a filter conditions, set of data comes in BPS layout on execution and 2 date fields also contain some value...I want to change values of these 2 dates...both the date fields are char infoobjects..in BPS layout, in planning function I got only 1 function ( Repost function ) to change the value of char infoobject based on some condition. but date field value is not the status field...i want to enter new date instead of old date..if i right exit function in that also i can change only keyfigs values..so please help me to solve this problem..
Thanks & Regards,
Priyanka Joshi

Hi Priyanka,
As of now master data planning is not so flexibly supported.
Still u can refer the below link which is enhancement of standard Repost function,and can be used to change master data.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92]
As far as my knowledge goes u cannot directly input date in rows.
regards,
Rajendra

How to calculate a date in the future and set it as field value?

I'm trying to set the value of a read-only field to a date and time 72 hours from the current date and time. Here's how I'm doing it now:
var futureInMilliseconds = new Date().getTime() + 259200000; // current date and time + 72 hours in milliseconds
field.value = new Date(futureInMilliseconds);
The field is formatted as "m/d/yyyy h:MM tt". When I test this in the debugger I see it listing the correct date and time in the future, but the value applied to the field is always the current date and time. So, I'm having a difficult time getting this to work for something that should be fairly straight forward and simple. I'd appreciate any suggestions.

What is the "field" object?
What happen when you use "event" for the object and not "field"?
Even if this script is placed at the document level or any other location, it is still a calculation. It just not a field Custom Calculation Script. You are adding one value to another to get a new value.

Require Transfer a Field value of CRM to a Field in ECC system

Similar Messages

Maybe you are looking for