Required - Battery Level and network signal strent...

It would be very useful if there was a Battery Level and network signal strenth indicators in OVi Suite. IMO even free mobile management apps have this useful feature.So it shouldnt be a problem for Nokia to add this to Ovi suite.

When I connect my N8 to the PC I get the below window pop up.
So it seems the function you describe already exists.
Thanks
Ray

Similar Messages

REQUIRED FOLDER LEVEL AND APPLICATION ACCESS

Dear Expert,
I am new in SAP BO admin, I want folder level access and application level access.
My senario as below
FOLDER ABC HAVING 3 SUB FOLDER LIKE FOLDER 1 , FOLDER 2 AND FOLDER 3.AND ALL THE FOLDER HAVE SOME DASHBOARD INSIDE.
I have created 3 users
USER 1 CAN VEW ONLY FOLDER 1 DASHBOARD
USER 2 CAN VIEW ONLY FOLDER 2 DASHBOARD
USER 3 CAN VIEW FOLDER 2 AND FOLDER 3 DASHBOARD.
Please share me step by step guide.
Many Many Thanks In Advance.
Regards,
Divyesh Patel

Hi Patel,
pls check the below threads
Folder Level authorisations
Folder level authorization in BO 4.0
Securing Business Objects Content – Folder Level, Top Level and Application Security
User Authorisations
User Authorization in CMC?
Note: after assigning access to sub-Folders ,we need to assign access to root folder also to users.
Hope this Helps,
Sundar Kumar

Location service (GPS problem) leading to loss of wifi and network signal.

I Have iphone 3gs factory unlocked .i have problem with my iphone ,when ever i on the location service, netwok as well as wifi signal drops for few seconds and then gains this problem continues until i off the location service. i had the problem in ios 5.1.1 so i updated to 6.1.3 but no use the problem continues. can any one help mee....

Hey i_Guy,
Try resetting the network settings on the iPhone, goto Settings> General> Reset> Reset Network Settings
http://support.apple.com/kb/TS1398?viewlocale=en_US
What type of Wi-Fi security is being used? If its WEP, the issue may be related to this article:
http://docs.info.apple.com/article.html?artnum=108058
Jason

Screen flashes between battery level and screen saver

Hi
When I charge my iPhone up in my new iH8 alarm clock I get the "switch to airplane mode" message - fair enough. But once its been charging a few minutes the screen comes on by itself and then flashes between the image of the battery and the screen background image. It also makes an annoying click too... This flashing seems to go on indefinitely.
Any thoughts?
Cheers
Jimmy

Welcome to the Apple community.
If this is the first generation Apple TV, then unfortunately it sounds like the unit has failed. You might try removing all the cables for a few minutes and then powering it back up, however even should this prove successful, the Apple TV may well do the same thing again shortly after.

Can't see the battery, clock, and network indicator on lock or home screen

It only appears in apps. I just upgraded to 7.0.2. It's the whole bar that's missing, also wifi, alarm, DND mode, etc... Anyone else seeing this? Is there a new setting for this somewhere?
Thanks!

Alright. The problem seems to have solved it self after I updated some other apps (skype and pizza pizza). Seems like that should be unrelated, but it happened.

Detecting battery level?

Why doesn't this program work?
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.applet.Applet;
import java.io.*;
import javax.power.monitor.*;
public class jbattery extends Applet implements ActionListener {
static public Label lab1,lab2;
Button ExitButton, GoButton;
    public void init()
//****** Prepare choice list containg subfolders:
             setLayout(null);
          lab1 = new Label("%");
          lab2=new Label("secs");
          ExitButton = new Button("Exit");
          GoButton = new Button("GO");
          //******** Set controls positions.
          lab1.setBounds(10,10,150,15);
          lab2.setBounds(10,30,150,15);
          ExitButton.setBounds(70,250,50,20);
          ExitButton.addActionListener(this);
          GoButton.setBounds(155,50,35,20);
          GoButton.addActionListener(this);
          //******** Add control to frame.
          add(lab1);
          add(lab2);
          add(ExitButton);
          add(GoButton);
    public void paint(Graphics screen)
public static void main(String[] args)
       Frame f = new Frame("jbattery");
       f.addWindowListener(new WindowAdapter()
            public void windowClosing(WindowEvent e)
          {System.exit(0);}
       jbattery istanza = new jbattery();
       istanza.init();
              // Get the system power monitor.
        PowerMonitor monitor = PowerMonitor.getInstance();
        int remaining = monitor.getEstimatedSecondsRemaining();
        int level = monitor.getBatteryLevel();
        // Get the current time and battery level.
        Integer secs=new Integer(remaining);
        Integer perc=new Integer(level);
        System.out.println("Battery Level = " + level +
                           ", " + remaining + " xxseconds remaining.");
        lab1.setText(perc.toString()+"% charge.");
        lab2.setText(secs.toString()+" xxseconds remaining.");
       f.setSize(200,280);
       f.add("Center",istanza);
       //f.pack();
       f.setVisible(true);
}//fine MAIN
public void actionPerformed(ActionEvent evt)
if (evt.getSource() == GoButton)
{ // if GO button pressed, or ENTER pressed after writing a word:
//        lab1.setText(level+"%");
//        lab2.setText(remaining+" secs");
} // end " IF TESTO1 "
else if (evt.getSource() == ExitButton) // If EXITBUTTON pressed.
{System.exit(0);}
}    // procedure end.
} // program end.It should just detect two integer values, but it always returns 2147483647, like if I forgot initialising something... but WHAT????
It should work on UIQ phone (p800/p900/a1000,...)

jumpjac,
Did you get this to work?
I am trying to determine if there is a way to get the battery level and the
signal strength from within J2ME on a P910.
I see at the bottom of your post:
" ... It should work on UIQ phone (p800/p900/a1000,...) ..."
Thanks,
manco

Simple critical battery level warning script

This is a little script I wrote for use on my laptop. I wanted to have some kind of visual cue to let me know when the battery charge gets below a certain level and this is what I came up with:
#!/bin/bash
# Configuration
interval=120 #in seconds
critical_level=10 #percent
icon="/usr/share/icons/Tango/48x48/devices/battery.png" #notification icon
battery_id="BAT1" #ACPI battery identifier
ac_adapter_id="ADP1" #ACPI power adapter identifier
while true
do
if [ "$(cat /proc/acpi/ac_adapter/$ac_adapter_id/state | grep -o off)" == "off" ]; then
battery_max=`cat /proc/acpi/battery/$battery_id/info | head -3 | tail -1 | awk '{print $4}'`
battery_current=`cat /proc/acpi/battery/$battery_id/state | head -5 | tail -1 | awk '{print $3}'`
battery_level=$((100*$battery_current/$battery_max))
[ $battery_level -le $critical_level ] && \
notify-send -u critical -i "$icon" -t 15000 \
"Battery level is low!" "Only $battery_level% of the charge remains."
fi
sleep $interval
done
This script uses notification-daemon (or notification-daemon-xfce) package. It can be configured by editing values in the "Configuration" section. I just autostart it with my openbox session. It all should be pretty self-explanatory otherwise.
I hope someone finds it useful.
EDIT: Some improvements to the script.
Last edited by fwojciec (2008-07-09 13:11:14)

robmaloy wrote:
thx, really cool i always forget to look after my battery percentage
maybe you can replace "BAT1" and "ADP1" with variables, so configuration would be easier
Thanks I made changes according to your suggestion.
moljac024 wrote:laptop-mode tools has an option of running commands when battery charge reaches a certain level. You could just run notify-send from there.
You mean in the auto-hibernate section? I use it as it was supposed to be used -- for hibernating -- and I think you can only set one command that's executed according to a specified battery level in laptop-mode-tools. Plus it would be sort of complicated, since displaying the notification depends on two conditions in this script -- specified battery level and power cord being disconnected.

Generating sync and PCLK signals for a sony XC-55 camera?

Hello, we have a Sony XC-55 camera connected to a PCI-1408 board that we would like to use in asynchronous mode to capture images. I know that it is possible to use the camera for this purpose because there is a document on how to do this with a 1409 card.
We also have a PCI-MIO-16E-4 board that we have connected to a shaft encoder. We want to trigger the camera when the shaft encoder is at certain positions. This shaft encoder will be connected to the 8 digital lines on the MIO board.
Is there any way I could use the MIO board to generate the required HSYNC, VSYNC, and PCLK signals? I'm thinking about using the PFI signals, but I don't know how to generate the required PCLK signal.

As you may have noticed, the 1408 does not have the same pulse generation capabilities as the 1409. You cannot use IMAQ Generate Pulse with the 1408 to get the required HSync, VSync, and shutter signals. You could use the counters on the MIO board to generate two of the signals, but not all three. It might be possible to operate the camera in internal HD mode and just provide the VSync and shutter. One of the 660x counter boards could generate all of the signals, however you would probably be better off just using a 1409. PCLK is generated internally by the camera and does not need to be provided by the board.
Are you using an absolute encoder in your system? You can read an absolute encoder with the DIO lines on the MIO board, however you will have to conti
nuously poll the lines to find out when you have reached the desired positions and then output a pulse. This operation will be software timed, so there will be some latency. If you have an incremental encoder, you could connect it as the source to one of the counters and output trigger pulses at precicely defined intervals.
Regards,
Brent R.
Applications Engineer
National Instruments

Signals drop on iPhone 5s iOS 8.1 both wifi and network

I am having the following problems since i updated to iOS 8.1 on my iPhone 5s 16GB model A1533 :
1- My network signals drop to 3 dots and sometimes to 2 and stay there.
2- Sometimes my wifi disconnects itself on my iphone for almost 4 or 5 seconds
3- My battery is draining faster that ever. I turned off the use of fingerprint and found it useful but still my iphone consumes a lot of battery. I get my battery percentage dropped to 80% from 100% in just 20minutes of whatsapp usage. My fone's vibration is never on. Location services all off except find my iphone. Background app refresh also off. I tried everything. Erase all settings, hard reset etc. NO USE
4- Playing games is really difficult. Battery drains very fast.
I did not have these problems on 7.1.2. Need help
Regards,
Ahmad

I understand that but I hope that people from Apple will be referring to the support groups and may actually think about that last paragraph.

My iphone 5 keep on shutting down ever since iOS7, not related to battery life and requiring it to be reset to become operable again. How do I fix this?

Hi,
My iphone 5 has started to randomly shut down (So battery level not affected) constantly requiring a hard reset everytime to restore the phone back to working condition. Sometimes it doesn't even respond to a hard reset (Power button and home button pressed together) and is not recognized by itunes. If I leave it alone for a little while and tehn try again it sometimes works. Again its all random sometimes immediately sometimes after a few hours. Its really ridicolous on unreliable this phone is. Worst part I was quite happy and had no problems prior to iOS7 but ever since that upgrade my phone is no longer working. Apple told me this is a hardware issue but that doesn't make sense as it was fine prior to iOS7. Either way I am past the warranty so this means buying a new phone - whcih based on my current experience will not be an iPhone unless I get this fixed.

I have reset my phone a large number of times. It doesn't work. I am now reseting and setting it up as a new phone every 2 days. It works for a while and then teh cycle repeats.

Our Century Link Modem/Router supplied at set up, has poor range. It is in the kitchen ( main level ) and won't reach our studio fully at 30-40ft away. Will setting up my time capsule i the studio improve this signal?

Our Century Link Modem/Router supplied at set up, has poor range. It is in the kitchen ( main level ) and won't reach our studio fully at 30-40ft away. Will setting up my time capsule in the studio improve this signal? If not, what can I do!???

Will setting up my time capsule in the studio improve this signal?
Yes, if the Time Capsule remains connected to your Century Link modem/router using a permanent, wired Ethernet cable connection.
Any other option will involve the purchase of more hardware.
One option would be to keep the Time Capsule connected to the modem/router using a short Ethernet cable, and configure the Time Capsule to provide a wireless network. Add an AirPort Express about half way between the kitchen and the studio to wirelessly extend the signal from the Time Capsule to provide a much stronger signal in the studio.
Another option might be to use a wireless repeater that is compatible with the modem/router. Century Link might have a solution, or be able to recommend a compatible device for that purpose.

HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

Unable to caluclate cost in CJ20 for wbs and network level.

Hi All,
I have a query in the project Builder(CJ20N).
I created Project>WBS Elements>Network> and posted costs via assigning activity.
If I select an activity and go to edit>Costs, the "calculate costs" option is activated. ( I get "Message Costs were calculated: See menu Edit -> Costs -> Planned - Actual")
And also I am able to view the cost in Edit>Costs> Plan/Actual.. "Activity/Element". Please see the screenshots of Plan /actual comparison.
However if I select the WBS or Network and go to edit>Costs, the "calculate costs" option is disabled (frozen) and also in the same path Plan/Actual> "activity/Element" option is disabled (Frozen).
Request you to review the attached screenshot and advise is there any way to defreeze the option "calculate costs" and view the costs in WBS and Network level?

Hi,
why you want to see plan cost in project builder CJ20n? any specific reason please let us know...
every structure report having this kind of feather as CN41n/CNS41 then check these two report.
and lots of hierarchical report is there for seeking plant cost in project as Gokul suggested above.
so in project builder only plan VS actual cost can be look like by network activity.
Regards,
Sanjeev

Will an iPhone automatically turn off location services. If it goes below a certain battery power level, and so how you disable this in settings.

I am working with Georgia DOT and we have created an app to track our state vehicles using IPhone 5. My question is: will an iPhone automatically turn off location services? If it goes below a certain battery power level, and if so how do you disable this in settings.
Message was edited by: mickyel

I don't believe that this will happen, however, the entire iPhone will shut down when the iPhone reaches the auto-shutdown power level. There is no way to turn that Off other that connecting the iPhone to power.

Required - Battery Level and network signal strent...

Similar Messages

Maybe you are looking for