Requirements for ADSL router configuration

I have just bought a Netgear DGND3300 ADSL model and wireless router to replace my very old Draytek router.
The set up Wizard on the Netgear CD ROM couldn't successfully configure the router on it's own, and suggested a manual configuration. I have accessed the control panel on the router itself and there is another wizard/auto configure application there but it also failed. So I am resigned to doing a manual configuration. I happy to do this but I can't for the life of me find a spec sheet anywhere on BT.com that tells me what configuration settings BT Broadband requires. Am I missing something obvious? If anyone can point me to a helpful page that would be great.
The types of data I need for the manual configuration are:
Connection type: e.g. PPPoA?
Encapsulation method:?
VPI:
VCI:
DNS:
Dynamic/static IP address: presumable dynamic
Any help gratefully received.
Cheers
H
Solved!
Go to Solution.

Does your connection require a login:Yes if asked
username: [email protected]
password: leave blank or enter BT if not accepted
PPPoA
VPI:0
VCI:38
Dynamic unless you've asked for static
The router should pick up the DNS addresses when it connects, hopefully that will get you running.

Similar Messages

Scenario required for sd route and mm route

Dear Guru
There is two process for stock transfer order one is SD route and 2nd one is mm route
can you please explain the differnce between these rout
and what is the scenario required for sd route and mm route
it means in which scenario we use sd route for stock transfer and in which scenario we use mm route for stock transfer
Thanks in advance
Kashyap

Kashyup,
I am not aware of 'SD Route vs MM Route'. They are the same Route.
STO is basically a special kind of Purchase order. Purchase orders are part of the MM module. In order to permit shipping goods from one plant to another, SAP has 'borrowed' some of the functionality from the SD module.
During Configuration of Stock Transport orders, you assign a Customer (Shipto), Sales org, and Distribution channel to the receiving plant. When creating a STO, the system uses these data to determine the Route.
Route contains info that the system uses to plan movement of goods from one location to another location in the SD module. The route contains duration information (how long does it take to move goods from warehouse to customer location), factory calendar, and perhaps some other data. In the case of an SD order, the system will find the customer for the Sales doc, the default shipping conditions for the customer, and using this information together with the region of the shipping point, will determine a route.
This same determination procedure is also used during creation of a STO. The system will take the STO customer from STO configuration, and the default shipping conditions for that customer, and using this information together with the region of the shipping point, will determine a Route. The same determination procedure used by SD sales orders.
When you are setting up your master data, and you have decided what the duration of transport time should be, it is important that your planned delivery time in your info records or in your material master be consistent with your shipping duration (pick/pack/route time). This makes the execution (creation and shipment of STOs) stay consistent with planning (creation of STO purchase reqs) as far as timing is concerned.
If your STOs use Deliveries, then the shipping information in the STO that was determined during creation (customer, shipping point, route, etc) will be copied to the delivery during delivery creation.
Rgds,
DB49

Pre-requisites required for the local configuration of the Weblogic portal

Hi All,
I have got the code from the client. It is appenntly came to know that Code has been developed in Weblogic workshop.
When we build teh application we are getting the following web services related Errors:
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
PortaleWebApp: Created control beans for 19 controls in 12703 milliseconds
BUILD FAILED
ERROR: Build failed with 15 error(s).
When we deploy in the Portal weblogic server, Application is deploying with out any errors. But it is not showing any login page when I start the PTLoginMain.portal file.
As I am completly new to this Weblogic Portal server, Please let me know, Do i need to configure the any setting before starting the application. I mean to ask you that Pre-requisites required for the local configuration of the Weblogic portal Server.
Any Help would be much appriciated.
Regards & thanks,
Nirmala Vijaay Sekhar Varre

and your server address can be resolved or not?
Are you accessing the server from Windows or Linux?
- On Linux try editing the /etc/hosts file and add something like: 10.241.110.105 server1.etcetera
- On Windows try editing the C:\WINDOWS\system32\drivers\etc\hosts file and add something like: 10.241.110.105 server1.etcetera
When this works, contact your system administrator and ask him or her to map an ip to your hostname in DNS and DHCP
such that the servername automatically resolves the ip-address

Patches required for installing the configuration management workbench?

Hi Team,
Please list all patches required for installing the configuration management workbench in Oracle Apps version 11.5.10.2 ?
Please let me know.
Thanks,
Suman V.

Hi;
I also suggest to check:
How to Configure the Oracle Configuration Manager with Support WorkBench [ID 1174943.1]
Regard
Helios

DNS server required for default route

I'm trying to find out if Apple is aware of this requirement, as it is problematic for network engineers.
The summary of the problem is that without a DNS server configured, mavericks will not activate the default route. So if you configure a DHCP scope without a DNS server, your Mac will not be able to have IP connectivity outside it's local subnet.
I blogged the details of this bug/feature: http://transmitfailure.blogspot.com/2014/02/mac-os-x-mavericks-dns-server-requir ed.html
I'd really like to hear from Apple, just to say if this is intended or not. The commenter said this is happening on 10.9.2 as well as the 10.9.1 I tested.

You're very unlikely to receive a direct response on that from Apple through these discussions.
https://bugreport.apple.com may get something.

Cook required for SAP workflow configuration

Hi Folks,
I need a cook book which explains how do we configure SAP workflow.
Thanks,
Imran

Just buy Practical Workflow for SAP 2nd Edition. There is no "cookbook" available in internet. There are some good tutorials etc. Have you gone through the SDN workflow wiki?
Regards,
Karri

Requirements for starting JSP

Hi,
I want to run a simple JSP pages.
Can anyone tell me about the requirements for running JSP and how to configure the server and related stuffs.
Also if you could let me know about the configurations and softwares required for installing and configuring the server.
I was suggested to use Tomcat, but what is
it and is that the only software I'll need
to run JSP?
Please be specify in your explanation as Im very new to this.
Currently, Im using NT and only got JDK 1.3 installed on my PC.
Thank you very much for your help.
Regard.
Tara

Do the following steps first
1. Install JavaWebServer2.0 on NT ServerJava Web Server is an outdated/unsupported product and currently not available for downlaod. Use Tomcat (http://jakarta.apache.org) or Resin (http://www.caucho.com) as JSP enabled web server.
Read the tutorials mentioned at http://www.jspinsider.com
2. Store your file with .jsp extension in
"public_html" folder
3. Start Services as following
- go to control panel
- double click on servercis
- look for JavaWebServer and select it
- Click on start button
- close it
3. Start IE5.0
4. put the following in URL bar
http://your_machine_name:8080/yourfilename.jsp
JSP file
<html>
<title>My first Jsp program </title>
<%
out.println("<h1> Hello welcome Jsp Prgrms");
%>
</html>
Get in touch, if any other probs.
Happy learning JSP
Husami
/Sreenivasa Kumar Majjil.

SNC router configuration on linux

Hi All,
If anyone having the document for SNC router configuration on linux, pl share.
Regards,
Joe

Hi,
check sap Note 30289 - SAProuter documentation
look at attached document to note.
further mail me for other documentation .
check my business card for mail address.
regards,
kaushal

ISDN backup for ADSL connected sites using separate router

In our set-up we have a central site with a large number of remote sites connected.
We have moved a number of remote sites from ISDN connections to ADSL connections. However, we would like to keep the ISDN and use it for backup.
The problem I have is - how do I implement ISDN backup with our current set-up? From the documentation, I can see how to do this for more "straightforward" set-ups but not for the set-up we have! Let me explain:
At the central site, we have a Cisco 7206 router. The ISDN connected sites connect directly to this router (which is configured with a large number of dialer map statements for each site)
The 7206 connects to a PIX515E firewall. The ADSL connected sites connect over the public internet using IPSEC with the tunnels terminating on the PIX.
The 7206 router contains static routes for the ADSL connected sites, pointing to the firewall.
At the remote sites, we have a Cisco 837 router for the ADSL connection.
This is connected (via ethernet) to the router we want to use for ISDN backup - a Cisco 800. The 837 and 800 are configured with HSRP.
However, at the moment, if the 837 or the ADSL link was to go down, there would be no means to connect to the central site. How can we configure this to use the 2nd router for ISDN backup, given our set-up?
Any suggestions would be greatly appreciated!
(incidentally, I have only recently joined this company and have taken this over, without any information to go on as to why things are set up as they are !)

Hello again,
I think you can pretty much ignore my last message. I've done a bit more digging and I think I have a better idea of what you mean now!
Lets see if I've got this about right. To recap:
I need to set up a GRE tunnel between the remote site and 7206 router at head office, which in turn would be using IPSEC tunnel between remote router and PIX.
So, steps required:
1) set up IPSec tunnel to to PIX (this is the way it is already currenly configured - am I right in thinking no further configuration would be required as far as the PIX is concerned, for the new set-up?)
2) set up GRE tunnel between remote ADSL router and 7206 - requires tunnel interface on both router with start point and end point configured. Use GRE keepalive to enable the line protocol to be brought down if the far end cannot be reached.
3) Add static routes on ADSL router to reach head office network via tunnel interface
4) Add static route on 7206 router to reach remote network via tunnel interface
5) Configure ISDN map statement on 7206 mapping remote network to ISDN number
6) Configure "floating" static routes on 7206 to use ISDN to reach remote network
7) Configure HSRP on ADSL and ISDN routers with tracking of tunnel interface. If tunnel interface goes down, then ISDN router takes over as active.
8) Configure static routes on ISDN router to point to head office network using BRI0 interface.
So, under normal operation, traffic between head office and remote office will be routed across the GRE tunnel using the ADSL link.
If the ADSL link was to go down then the GRE tunnel would also go down. So, the 7206 would then use the floating static routes to reach the remote network via the ISDN connection.
The ISDN router would take over as active at the remote site since the tunnel interface would have gone down, forcing the HSRP to failover.
Does that all sound about right? Is there anything I've missed?
I'll start trying to put some configurations together when I get the chance - but, if its ok, I'll probably run these past you too, just to make sure they seem correct!
Thanks,
Neil

Recommendations - UK ADSL router for AirPort

I've been having fun trying to configure my in-laws D-Link DSL-300G+ router with an AirPort Extreme.
I've resulted giving them my Asus AAM60xxEV so their AirPort network is working.
I've played with the D-Link but gather that it's really not AP compatible. If I'm to replace it can anyone recommend a decent ADSL router that will work with AP.
Thanks,
Jamie.

It is very nice to see all the positive comments made about ADSL Nation and our products. I thought I would just post an update those who are interested in what is happening at the moment.
The X-Modem has proven very popular and is an ideal companion to the Airport Extreme/Express. So people looking to buy one will be pleased to hear that we haven't dropped it completely, we are just revamping our product range. We have a new X-Modem called the X-Modem M3 in the works but due to problems with the manufacturing facility we use the X-Modem CE has sold out and we haven't been able to produce any more. The new X-Modem M3 will be in a silver metal finish so that it looks nicer along side the G5/Mini/Powerbook etc. We were expecting it to be available already but as seems to be a standard feature of the technology industry delays have crept in and I expect that mid October is the likely timescale for the X-Modem M3.
The AMX-64 is also now discontinued and is being replaced by the MRX-400 that is expected at the end of October.
Our latest product just launched on Friday the 23rd is the X-Station. The X-Station is basically a combined ADSL Modem, 4 port Router, and Airport Extreme (54g) compatible wireless. So for people considering what is the best option an X-Station or a combination of Airport Extreme/Express + X-Modem here are a few pointers to help you decide as both options have their benefits.
The chief advantage of the X-Station is that because everything is in one box you just have the one piece of equipment to set-up with just a single power outlet required. The provision of 4 Ethernet ports means that it is easy to connect a range of both wired and wireless computers to the X-station. It also means that combining all the features into a single box makes the combined unit costs about half of what the separates cost.
However the two can not be directly compared as there are some key advantages of the Airport Extreme/Express that no other wireless solution offers. The key differences for the Airport Express are primarily the USB port and the AirTunes features. The USB port allows you to connect a printer to the Airport Express/Extreme so that printing can be done without having the printer shared on another computer the X-Station allows connection of Ethernet and Wireless printers but a USB printer will need either to be shared via a Mac or using an optional USB print server. The AirTunes option as I'm sure most people already know allows iTunes music to be sent over the wireless link to play on a stereo connected to the Airport Express base station and this is exclusive to Apple's Airport Express. The other two key advantages of Airport Extereme/Express are the fact that having a separate modem means that migration to another broadband technology for example cable is easy by simply swapping the modem. Also if the wireless range on the Airport is not enough a second one can be used as a repeater (WDS) not available on the X-Station. The methods for extending the range on an X-station are by using a more powerful antenna or adding a second wireless access point connected via Ethernet to the X-Station.
I hope that the information is useful for those of you looking at your options and please feel free to ask any questions on the forum.
Note to moderators: This message is intended to answer the curiosity of discussion group members and is not attempt to sell anything.

LZW 4G LTE Router Configuration for Cisco 881W (Teleworker, VPN)

I can't get the configuration of the the router to allow traffic on my company's VPN. The router is connected to the internet and otherwise works fine but whenever I attempt to connect via Cisco AnyConnect or the Cisco router, I can connect but can't access any intranet resource, email, etc. In essence, I can authenticate but can't do anything.
I've tried contacting NetGear and they referred me to Verizon. I contact Verizon and Technical Support does not have any information about how to configure their own routers. I'm waiting to hear back from an escalation group in my company's technical support.
I tried opening ports for UDP/TCP already and I attempted to create a static route but the router tells me that my info in incorrect (but I have no idea what is wrong either).
Has anyone come across a similar situation or could help point me in a direction towards a solution?
Thansk.

Check with the network administrators for your company. They should be able to confirm the version of your Cisco AnyConnect VPN and the requirements that it needs to open and sustain a tunnel. Once you learn the requirements you can come back to the VZW forums for assistance on configuring your device.
Normally when a VPN authenticates but does not allow any communcation it means that there is a port, firewall rule or NAT feature conflict somewhere on the local network. For example, the old Cisco IPSec VPN requires UDP ports 500/4500, IP 50 and TCP 10000 to be open in addition to NAT-T enabled on the VPN server. Your company may have customized the VPN for thier enviornment so you really need the details before you can move forward.
A good link I like to save for instances like this (old Cisco VPN):
http://www.canvassystems.com/blog/articletype/articleview/articleid/14/how-to-fix-cisco-vpn-client-error-412.aspx

DM-VPN with Static NAT for Spoke Router. Require Expert Help

Dear All,
            This is my first time to write something .
                         i have configure DM-VPN, and it's working fine, now i want to configure static nat.
some people will think why need static nat if it's working fine.
let me tell you why i need. what is my plan.
i have HUB with 3 spoke. some time i go out side of my office and not able to access my spoke computer by Terminal Services. because its by dynamic ip address. so what i think i'll give one Static NAT on my HUB Router that if any one or Me Hit the Real/Public IP address of my HUB WAN Interface from any other Remote location so redirect this quiry to my Terminal Service computer which located in spoke network.
will for that i try but fail.
will again the suggestion will come. why not to use .. Easy VPN. well sound great. but then i have to keep my notebook with me.
i'll also do it but now i need that how to do Static NAT. like for normal Router i am doing which is not part of VPN.
ip nat inside source static tcp 192.168.1.10 3389 interface Dialer1 3389
but this time this command is not working, because the ip address which i mention it's related HUB Network not Spoke
spose spoke Network: 192.168.2.0/24
and i want on HUB Router:
ip nat inside source static tcp 192.168.2.10 3389 interface Dialer1 3389
i am using Cisco -- 887 and 877 ADSL Router.
but it's not working,   Need experts help. please write your comment's which are very important for me. waiting for your commant's
fore more details please see the diagram.
for Contact Me: [email protected]

hi rvarelac thank you for reply :
i allready done that , i put a deny statements in nat access-list excluding the vpn traffic , but the problem still there !
crypto isakmp policy 10
encr aes
authentication pre-share
crypto isakmp key 12344321 address 1.1.1.1
crypto ipsec transform-set Remote-Site esp-aes esp-sha-hmac
mode tunnel
crypto map s2s 100 ipsec-isakmp
set peer 1.1.1.1
set transform-set Remote-Site
match address vpnacl
interface GigabitEthernet0/0
crypto map s2s
Extended IP access list lantointernet
30 deny icmp 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
40 deny igmp 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
50 deny ip 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
80 permit ip any any

Why can't I configure BFD for static routes on IAD2431 on ios 15.1(2)T when Feature Nav says its in there

I am trying to configure BFD for static routing on a 2431 running IOS 15.1(2)T to detect and route around simple multihoming faults. According to Cisco Feature Navigator, BFD for static routes is supported on c2430-ik9o3s-mz.151-2.T.bin. But when I follow the config guide steps to configure it, IOS does not recognize the commands, such as:
ERC3-IAD2431-3(config)#int fa0/0
ERC3-IAD2431-3(config-if)#bfd ?
% Unrecognized command
ERC3-IAD2431-3(config-if)#
and:
ERC3-IAD2431-3(config)#ip route static bfd fa0/0 172.19.113.241
% BFD is not supported on FastEthernet0/0
ERC3-IAD2431-3(config)#
Am I missing some prerequisite, or restriction?

Vignesh,
As requested:
ERC3-IAD2431-3#show version
Cisco IOS Software, 2400 Software (C2430-IK9O3S-M), Version 15.1(2)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 19-Jul-10 16:23 by prod_rel_team
ROM: System Bootstrap, Version 12.3(7r)T2, RELEASE SOFTWARE (fc1)
ERC3-IAD2431-3 uptime is 1 week, 20 hours, 31 minutes
System returned to ROM by reload at 15:45:52 EDT Mon Oct 27 2014
System restarted at 15:47:56 EDT Mon Oct 27 2014
System image file is "flash:c2430-ik9o3s-mz.151-2.T.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco IAD2431 (R527x) processor (revision 4.1) with 250880K/11264K bytes of memory.
Processor board ID FHK1444F1GM
R527x CPU at 225MHz, Implementation 40, Rev 3.1
2 FastEthernet interfaces
48 Serial interfaces
2 Channelized T1/PRI ports
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
63K bytes of non-volatile configuration memory.
System fpga version is 250027
System readonly fpga version is 250027
Option for system fpga is 'system'.
126976K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
ERC3-IAD2431-3#show int fa0/0
FastEthernet0/0 is up, line protocol is up
Hardware is Gt96k FE, address is 5475.d026.3019 (bia 5475.d026.3019)
Description: Uplink to TWC/Avaya VoIP Network
Internet address is 24.30.210.144/27
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 2000 bits/sec, 3 packets/sec
5 minute output rate 1000 bits/sec, 2 packets/sec
40541 packets input, 6155984 bytes
Received 20517 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
149623 packets output, 22178324 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
17 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
ERC3-IAD2431-3#show int fa0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 5475.d026.301a (bia 5475.d026.301a)
Internet address is 172.19.113.242/29
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:44, output 00:00:05, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
14829 packets input, 3324508 bytes
Received 7916 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
78596 packets output, 7819210 bytes, 0 underruns
0 output errors, 0 collisions, 13 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
ERC3-IAD2431-3#
Thanks,
Alfy

Configuration required for attached for a file in a PO in ECC 6.0

Hi All,
1) Is any configuration/setting required for attaching a file in a PO/PR ECC 6.0.
2) How we can mail /send that file, is any enhancement required
Kunwar

Hi,
In One ID for any PO ,when go sytem in toolbar --> sevices for object,I am getting the services for object and showing the attachment ,but in another ID with same server ,computer ,it is showing "No services avaiable"
please guide any configuration/ setting missing?
Kunwar

What are the permissions required for configuring Streams in 10g

Hi All,
Is admin privileges required for configuring Oracle Streams in 10g. Please confirm.
Thanks,
Redro

What admin privilege are you referring to? There are many admin privs in the Oracle database.
What is absolutely required is reading the docs. Did you do so?
They are at http://tahiti.oracle.com
and they explain it all quite clearly.
There are also working demos here:
http://www.morganslibrary.org/library.html
Find anything with the keyword "Streams"

Requirements for ADSL router configuration

Similar Messages

Maybe you are looking for