Reset Page Properties to properties inspector in Dreamweaver CS6

Need help to reset the page properties button to the properties inspector. It was there when I installed CS6 but somehow I must have changed the settings.

Are you looking at the expanded Property inspector? There is a little white triangle in the lower, right-hand corner of the inspector that toggles the display of the bottom half of that panel. It's this part that contains the Page Properties button....

Similar Messages

Change a label in page when webpart properties are changed

Hi
can anyone please tel me how to
Change label in page when webpart properties are changed
Nishanthi N

Hi Nishanthi,
If it would be a Visual Webpart, then you have to pass webpart property in user control as WP property bag/collection so that you will retrieve it in ascx and assign its value to label on load event.
Add below code in Webpart:
[Personalizable(), WebBrowsable, WebDisplayName("City or Town"), Category("Address settings")]
      public String City {
get; set; }
        protected
override void CreateChildControls()
        AddressUserControl control = Page.LoadControl(_ascxPath)
as AddressUserControl;
        if
(control != null)
            control.WebPart =
this;
        Controls.Add(control);
Put this code in your ASCX Control:
MyWebPartClass ParentWebPart = (MyWebPartClass)this.Parent;
Use this code in your ASCX methods:
string webPartProperty = this.ParentWebPart.City;
Thanks
Please mark it as Answer if works...

Multicast sessions page of server properties

I am using ZEN 4.0.1 ir7, Netware 6.5sp4, ConsoleOne 1.3.6e.
I was creating multicast sessions on the multicast sessions page of server
properties for later use by my technician. I had created 5 sessions, then
closed the property page. Then later I went back to make changes on one of
the sessions. When I attempt to open that tab I get the message 'Loading,
one moment please...', and there it stays. I have to kill the ConsoleOne
process in task manager and restart ConsoleOne in order to do anything.
What's going on, and how do I correct it?

Thanks guys. I started c1 without the zen snapins, then deleted one of the
sessions from the 'other' tab. Then I put the zen snapins back in and was
able to view the rest of the multicast sessions. Kind of screws up the
linkages in edir doing it that way, but that's fixable.
>>> Kurt Finlayson<[email protected]> 11/5/2006 9:03:10 PM >>>
>Bill Knaack wrote:
>> I am using ZEN 4.0.1 ir7, Netware 6.5sp4, ConsoleOne 1.3.6e.
>>
>> I was creating multicast sessions on the multicast sessions page of
>server
>> properties for later use by my technician. I had created 5 sessions,
>then
>> closed the property page. Then later I went back to make changes on one
>of
>> the sessions. When I attempt to open that tab I get the message
>'Loading,
>> one moment please...', and there it stays. I have to kill the ConsoleOne
>> process in task manager and restart ConsoleOne in order to do anything.
>> What's going on, and how do I correct it?
>>
>
>This sounds familiar. I think this is fixed in a newer version of
>ZENworks but not in ZfD 4.x. You could try a consoleOne containing newer
>snapins of ZDM 6.5 or 7 and see what happens? Just a thought.

Create advanced search page using crawled properties?

When editing an advanced search web part, is it possible to use crawled properties to help filter a search?
Or is the only option to use managed properties?
www.SharePointed.com

I hope these two links will be helpful for you
http://social.technet.microsoft.com/Forums/en-US/ed2fcfe1-ebad-4398-a442-466ddfbaf0dd/advanced-search-with-managed-properties-and-crawled-property-mapping?forum=sharepointsearchlegacy
http://searchunleashed.wordpress.com/2011/08/24/understanding-crawled-properties-managed-properties-and-full-text-index-part-1/
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

Portal password reset page text changes

Hello Experts,
We are using Portal 7.02 SP13. We use the standard password reset tool for allowing users to reset their passwords.
On the logon page there is a link Get Support which the user clicks to reset his/her password.
Following this user sees the below where they select the option Password Reset and click Submit button.
We want to change the text Are you a suuplier having trouble logging in?
I have tried looking in the portal logon page PAR file to locate this text in some properties file, but a unable to locate it. Where do I find this text? Is it present within the logon page PAR or is there some other component within which I can find this?
Regards,
Saurabh

Hello Experts,
In the logon page PAR file I am able to find a JSP page umHelpPage.jsp which contains this line
<div class="urTxtH3" tabindex=0><%=logonLocale.get("HAVE_TROUBLE")%></div>
and when I do a View Source from the Password Reset page I can see the below line
<div class="urTxtH3" tabindex=0>Are you a suuplier having trouble logging in?</div>
I have looked at the logonLabels.properties and logonLabels_en.properties files under the umlogonbase.jar file within the portal logon PAR file, but for the key HAVE_TROUBLE I can see the text "Having trouble logging in?".
Howevert at runtime I see the text "Are you a suuplier having trouble logging in?", does this mean that this text is not getting picked up from the logon page PAR file?
Regards,
Saurabh

How to remove or disable "View Properties, Edit Properties Manage Permissions ..." from Shared/Personal Documents in My Site?

Hello Community
    Using Sharepoint 2010 Server and the UI I created My Site.
    In My Content there is "Shared Documents" and "Personal Documents".
    On each one if you click the carat on the right, you will see
a group of actions you can take.
    The actions include "View Properties, Edit Properties Manage Permissions" etc.
    How can I remove or disable "Manage Permissions" as an action on "Shared
Documents and Personal Documents" on that My Site page and for when any
other user creates a My Site page it not be there either?
    Thank you
    Shabeaut

It is normal for users to have full control over the content in their personal My Site (this includes the Personal and Shared Documents folders). This allows them to manage access on their own site (e.g. for Shared Documents).
On the MySite Host, users should not have the Manage Permissions right.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Reseting page number in Word RTF template for BI Publisher PDF generation

Hi!
Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
Page numbers are in footer in format
curr_group_page/total_group_pages
where:
curr_group_page is current page number in group (defined with BILLS.ID field),
total_group_pages is total page number of pages in group (defined with BILLS.ID field).
I need to reset numbering whenever BILLS.ID (group) change.
Example:
ID=1 (4 pages)
1/4, 2/4, 3/4, 4/4
ID=2 (1 pages)
1/1
ID=3 (2 pages)
1/2, 2/2
ID=4 (3 pages)
1/3, 2/3, 3/3
etc.
How to achieve that kind of numbering?
Any help appreciated.
Regards,
Damir Vadas
Edited by: Damir Vadas on May 16, 2011 12:49 PM

Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
Thank you,
Tony Miller
Webster, TX
You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
If this question is answered, please mark the thread as closed and assign points where earned..

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

How to add an extra page to the index.html page on dreamweaver CS6?

How to add an extra page to the index.html page on dreamweaver CS6?

Index.html = your domain's home page. There is only one home page per site.
To create a new page from your index, go to File > SaveAs > filename.html. Repeat for other site pages. Add links on your index page that lead to other site pages.
See Creating your first web site in DW CC (5-part tutorial)
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

How can I reset Pages after a failed update attempt?

I tried to download an update to Pages while away from home and my WiFi network. The updater instructed me to either download the update from a WiFi connection or to use my MacBook to download the update and sync my iPad afterward. Home is 700 miles away, and I don't have access to either my MacBook or to my home network. The problem is that the Pages icon is sitting on the desktop waiting for the update to start. I can't launch Pages until I either go home or find a WiFi connection that will permit downloading the update. Is there a way to reset Pages right now so I can use the application without updating it? I've tried powering down the iPad and restarting it, but that has not helped.

noelfrombaltimore wrote:
Jack,
I agree with you totally! Obviously, there's something terribly wrong with Apple's latest iTunes version 10.5 and it seems that everyone (including me) is experiencing major problems.
I don't even have any minor problems with it and neither do millions of others, so "everyone" does not have major problems.
But...Apple's "Support" people seem to be hiding behind a "firewall" from having to actually respond to the myriad of problems this new version has created and leaving it up to the "Support Community" (i.e.- that's right...you & me) to resolve these issues.
So what did Apple Support say when you contacted them?

Centering a page in Dreamweaver CS6 Fluid grid

Centering a page in Dreamweaver CS6 Fluid grid.
I figured this would be an easy task and have saved it to last. After watching videos, scanning the web and this forum I have found many answers but none of them seem to work in CS6. I currently have an extra 1-2% margin on the left to get the page closer to the middle but this doesn't work well with all screen sizes and its still not in the middle.
Page can be found here
Any advice would be greatly appreciated!

It looks like you've nested the rest of content within your #header DIV. And header div's width is 94.4% - this results in everything on the site have a ~5% margin on right.
You may want to fix this first to see if it helps you with the result you intend to get. If not, do post back.

Reset Page on redirect

Hello Friends,
I have different pages in my application.. I have a hyper link to Page 97 on page 1 and page 15 , Also Page 97 has some select on Submits [ redirects to same page]. My concern is, I want to reset the page only when I am taking the link from a different page [page 9,15] but not when I am redirected from page 97 itself.
I have created a 'RESET PROCESS' to reset Page 97 on Page 1 that should fire 'On Submit', but it did not help. am I missing some thing..
Thanks

Chaitu,
I am experimenting with using a "called from" mechanism where I would keep track apex page I came from. I created an application item named CALLED_FROM and created the following computation on page header. This way I can change logic on a page based on where I came from without having to clutter the URL with more parameters.
declare
l_url    varchar2(1000);
l_tokens wwv_flow_global.vc_arr2;
l_index pls_integer := 1;
begin
l_url := owa_util.get_cgi_env('HTTP_REFERER');      -- gets the url which referred us to the current page.
l_url := substr(l_url,instr(l_url,'f?p=') + 4);     -- gets the colon delimited list of APEX parameters from the url
l_tokens := htmldb_util.string_to_table(l_url,':'); -- parses the list into an array.
if l_tokens(2) is null then                         -- if there is no page id
    return 1;                                         -- return the home page id
else
    if l_tokens(2) != :app_page_id then               -- if we changed pages
      return l_tokens(2);                             -- assign the new page id
    else
      return :CALLED_FROM;                            -- retain the old page id
    end if;
end if;
exception
when others then
    return 1;
end;Basically all this does is it verifies if the referring page is an apex url and if it is then check to see that the referring page is not the current page you are on (some pages refer to themselves for refreshing data). If it is not then the CALLED_FROM application item is set to the referring page id. I have not tested this with page aliases and this is just some code I was experimenting with.
Cheers,
Tyson Jouglet.

Dreamweaver CS6 and CC both very slow page rendering under Mavericks

Dreamweaver CS6 and CC both very slow page rendering under Mavericks compared to 10.8.5
Any ideas?

One other thing I am seeing:
When I open any document (html, javascript) inside DWCC now, then close it without any changes, DW asks if I want to save changes.
I just tested this under 10.8.5 and there is no lag there, nor are documents mysteriously modified when opened.
Note: I have tested this both with and without other Apps or extensions running in Mavericks and 10.8.5

Can you make a Testimonial page in dreamweaver CS6

Is a Testimonial page hard to build in Dreamweaver CS6. I working in the fluid grid layout for a site and I was checking online and no real answers if someone wanted to comment on your site or respond to some work you did for them.
Thanks for your time.
Tom

Not quite sure how to answer this in a meaningful way for you. No, a testimonials page is not hard to make, but you need to have some skills with HTML and CSS to do so. Would the difficulty of doing this depend on whether you were using a fluid grid? No.
But the right way to do it is to use a data-dependent page, so that you keep your individual testimonials in a database and simply pull them out to be shown on the page.
What is your skill level with HTML and CSS (and with server scripting like PHP)?

Using trial version of Dreamweaver CS6, Blank page, HTML onlly 2 layouts

My students are starting out using a trial version of Dreamweaver CS6, but only get 2 different layout options when selecting a Blank Page, HTML. Can they add additional layout options somehow? This is making it hard for them to complete the assignment. Is there some way to get all of the layouts to show up?
Thanks, Eliot

The new DW CC only comes with two layouts - HTML5: two columns and HTML5 Three columns. Apparently there is no need for more because these two layouts are all you need. I don't use the CC version so I don't know anything else apart from this.
With two column layout, you can move the sidebar easily by floating it either left or to the right; So this makes it three layouts!!!!!. It should also have something called Fluid Grid Layout that is used to create "responsive" websites for mobile devices.
Did you have any other layouts in mind?

Reset Page Properties to properties inspector in Dreamweaver CS6

Similar Messages

Maybe you are looking for