Resetting the 5800
Hi,
When resetting the nokia 5800 to restore the factory settings, will the reset restore the original firmware version which the mobile was released with or the firmware will remain the last one updated?
If the answer is NO, should anything go wrong when updating the firmware, is there any method to get back to the original version?
Thanks
Once updated, your phone will not revert back to an earlier version.
If there is a problem after updating successfully, you can reinstall the current version to try to resolve the issue. In rare occasions, a software updtae can fail and leave the phone unable to start. If this happens, then your warranty covers the damage.
Similar Messages
-
5800 does a factory reset also reset the sim lock
I have a 5800, which has been unlocked by the provider (Tmobile) so I can use an 02 sim.
The phone currently has the expired certificate problem, and as suggested in the forums a factory reset may fix this. I know that most of the phones setting will also be reset...
But will a factory reset also reset the sim lock, and lock the phone back to Tmobile ?
Solved!
Go to Solution.No. It will remain unlocked.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
This is the report I get after:
Interval Since Last Panic Report: 176544 sec
Panics Since Last Report: 3
Anonymous UUID: 8D526306-CA36-4C7E-8053-65BE0295A3F9
Sun Aug 7 14:15:19 2011
panic(cpu 2 caller 0xffffff7f809522bf): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80a041a000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff80a3a7b2b0 : 0xffffff8000220702
0xffffff80a3a7b330 : 0xffffff7f809522bf
0xffffff80a3a7b3c0 : 0xffffff7f80a423fc
0xffffff80a3a7b410 : 0xffffff7f80a424bc
0xffffff80a3a7b470 : 0xffffff7f80cec749
0xffffff80a3a7b5b0 : 0xffffff7f80a61519
0xffffff80a3a7b5e0 : 0xffffff7f8095bc4a
0xffffff80a3a7b690 : 0xffffff7f8095754c
0xffffff80a3a7b880 : 0xffffff7f80959151
0xffffff80a3a7b960 : 0xffffff7f817d6008
0xffffff80a3a7b9a0 : 0xffffff7f817e4e06
0xffffff80a3a7b9c0 : 0xffffff7f818006d4
0xffffff80a3a7ba00 : 0xffffff7f81800739
0xffffff80a3a7ba40 : 0xffffff7f817e8c51
0xffffff80a3a7ba90 : 0xffffff7f817a0753
0xffffff80a3a7bb10 : 0xffffff7f8179f1c4
0xffffff80a3a7bb40 : 0xffffff7f817a4bfd
0xffffff80a3a7bb70 : 0xffffff80006524ad
0xffffff80a3a7bbe0 : 0xffffff800065284c
0xffffff80a3a7bc40 : 0xffffff8000652ff0
0xffffff80a3a7bd80 : 0xffffff80002a3738
0xffffff80a3a7be80 : 0xffffff8000222ff6
0xffffff80a3a7beb0 : 0xffffff8000214829
0xffffff80a3a7bf10 : 0xffffff800021bb58
0xffffff80a3a7bf70 : 0xffffff80002ae380
0xffffff80a3a7bfb0 : 0xffffff80002d83a3
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000->0xffffff7f80bc8fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8087e000
dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808e0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f808a8000
com.apple.nvidia.nv50hal(7.0.2)[2E84958C-1EEC-316B-9F7A-68C368F83476]@0xffffff7 f80bc9000->0xffffff7f80eeafff
dependency: com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000
com.apple.GeForce(7.0.2)[18E50F21-1E7F-3FFE-B298-7CD7A11879F8]@0xffffff7f817870 00->0xffffff7f81843fff
dependency: com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000
dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808e0000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8087e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f808a8000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 89938146718489
last loaded kext at 89789498800310: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f80791000, size 36864)
last unloaded kext at 87392699739594: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f80791000, size 36864)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.filesystems.smbfs 1.7.0
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AppleMikeyDriver 2.1.1f11
com.apple.driver.AGPM 100.12.40
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHDGraphics 7.0.2
com.apple.driver.AppleIntelHDGraphicsFB 7.0.2
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.0.8
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.GeForce 7.0.2
com.apple.driver.AppleLPC 1.5.1
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.driver.AppleIRController 309
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AirPort.Brcm4331 500.20.6
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.1.1f11
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.1f11
com.apple.iokit.IOHDAFamily 2.1.1f11
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.0.2
com.apple.NVDAResman 7.0.2
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.kext.triggers 1.0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.6)
Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3Try resetting the System Management Controller
http://support.apple.com/kb/HT3964 -
Error while resetting the delta in ODS (BI 7.0)
Hi all,
I face a problem in delta resetting...need your help... Thanks..
I have an ODS-1 which has target cube1, cube2, cube3....One week back a new target has been added as ODS-2....All complete data from ODS1 has been piped into ODS 2..(Note.. ODS2 has many more inputs from other cubes/ODS too)
NO issues till now....
I found a data problem in ODS-1 which got loaded 15 days back..... I have removed all 15 requests from cube1, cube2 and cube3... Now I am trying to reset the delta in ODS1...
I am getting the following error....Infoprovide ODS2 still contains request... Delete this first....
Since ODS2 has many other data alongwith ODS1... If I try deleting request from ODS2,, I need to clean it totally and redo... I dont want to do this...
Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
Let me know your suggestions.... Thanks!
Regards
Ayyappan.VIs there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
I dont think you can disconnect the link. just delete the requests originating from ODS1 in ODS2 and you can leave all other requests intact that are from other dataproviders and do a reinit. -
I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?
Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.
-
How Long will it take to reset the 16gb ipad with clear all data in it.
How Long will it take to reset the 16gb ipad with clear all data in it.
I have the same problem. I try to reset my ipad / iphone 3g using the reset and delete all content on general. It is almost 2 days now but my ipad / iphone 3g are not yet finish. Only apple logo / looping circle appears on the screen. What will i do? thanks... iOS 5.0.1
-
My Mcbook cant find the host. I get some conection because my Utorrent has some donwload activity, but when I attempt to open any page i just get a time out and ERR_NAME_NOT_RESOLVED. If i reset the SMC by removing the battery, google loads perfectly and it gives me search results without any problem. But when I click on any link, or attempt to enter a direct URL it gives me the error mentioned before.
I restarted the modem, changed the DNS, deactivate the firewall, conect the macbook via ethernet, change the IP, and nothing seems to work. This issue happened the first time i tried to conect to internet in a different country. Internet works fine in any other laptop or mobile device.
When using the assistant to run a diagnosis on the network, i get the first 4 items (wifi, wifi adjustments, network adjustments and internet provider) with a green light, and the other two (internet and server) with yelow lights (sometmes red light).
When i tried to connect the first time, i had a OS X 6.8 but i upgraded it to Maverick 10.9, since i had already donwnloaded it, and the result was the same.
anyone could help me please?We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong -
How do I reset the e-printer's web embedded server network password?
I have an HP Photosmart 7520 e-all in one. I use Windows 7. I could tried to set a password in the EWS network tab. I could not change the user name so it remains "admin". I set the passwork and it seemed ok. But when I tried to log on again, it would not let me in. How do I reset the network password?
I recommend that you run "Restore Network Defaults" from the front panel and then run the wireless setup wizard again. This will wipe out all your network settings.
SandyBob
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP
1-800-474-6836 -
How do I reset the furthest page read in iBooks from an HTML Widget?
Our training department just got a bunch of iPads and I'm writing some custom HTML widgets for iBooks for them for testing, in-class activities, etc.
On the last page I have a link to clear all the forms and return to the first page. Like this: <a href="ibooks:///#page(1)">Click here</a>
That all works fine but the next time the book is opened it auto-syncs to the FURTHEST page read (the last page with the test on it) instead of the LAST page read (the first page- from the link mentioned above).
Basically we want the link to reset the furthest page read to the first page of the book when they finish the test so that the next person to use the iPad goes to page one automatically.
Does anyone have an idea of how to do something like completely clear the iBook cache?
Much obliged!This was hand-coded HTML, CSS, jQuery/Javascript with a PHP file on our server that processes answers and emails them to our training director.
I use Brackets exclusively for coding.
Hope this helps you. -
The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?
Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis -
How do i reset the password for cisco DMM 5.1 hardware machine
Dear All,
I have a cisco DMM 5.1 with some players installed on it, I can login to the dmm 5.1 via web browser but I cannot login the hardware directly through the console, I dont have the password for the console access, Could any one please help me resetting the password for the cisco DMM 5.1 physica server keeping the data and the configuration on the server intact.?
Please help!!Dear Fahad,
If you have lost your "admin" account password, it can be recovered using the "pwadmin" account as documented at the following link:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dms/aai/administration/guide/pwadmin.html#wp1079466
If you have lost your "pwadmin" password as well, you'll need to open a TAC case and get a "DMS 5.1 pwadmin reset" ISO image via TAC. You can then boot the appliance with the provided CD to reset the "pwadmin" password, then login as "pwadmin" and reset the "admin" password from there.
Regards,
Marco -
I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
I have duplicates of a song on an album. One of the duplicates is grey with no album cover. When you attempt to swite and delete, the track will not delete and will not even play. I've contacted iTunes store and the person I received the support email from told me that it may not be downloaded. I emailed him back and explained that no there is no download for that song in my itunes store on my phone.
One I never received an answer back which shows you how well these people do their job.
Two: I really would prefer to have a solution to this problem without having to delete all of my music from my phone or resetting my phone. Because this duplicate isn't even showing up in my iTunes, it's only showing up on my phone.
When I attempt to find it in my itunes it plays fine. But when I try to find the file to delete it, it is no where to be found. I've tried everything that I could think of to get rid of it. And I don't want to leave the album/artist off my phone because I do enjoy their music... And I have the microsoft sync in my car.
Anyone got any ideas on how to do this without resetting the phone and/or taking my music off?If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen -
I just got my iPad, I have an iPod. When I go to put apps on my new ipad it says my apple ID Is disabled. I have reset the passwords. Somehow I have two id's? I've gone into settings for apps signed out and back in with the new p.w. I can't think of what else to do to get the disabled block off. Any ideas?? Thanks
See this Apple document for help...
http://support.apple.com/kb/ts2446
Maybe you are looking for
-
How to auto-capitalize first word of a sentence in Apple Mail (Mountain Lion)?
I've looked around and found a few posts which say this is not possible. I hope that becuase this is not too strenuous a piece of auto-correct functionality - and even works in iOS that it surely must be possible to get it to work on Mountain Lion Ma
-
Sent folder does not appear after installation. What to do to see the sent folder?
After installation, the inbox and trash folders are there. The local folders are also there. But the sent folder is not there. How do i get the sent folder together with the sent emails.
-
Silent install for Audition CS5.5
Can someone please tell me how to do a silent install of Audition CS5.5 or point me to the document?
-
Hide the field display from it0002
i wanted to hide a field display from IT0002 screen, queries, table view or other like transaction pa20 or pa30 ,should be prohibited when not authorized.
-
I would like to have the text next to my radio buttons be links that I can click on to bring up other pages. Is there any way to do this in Jato? When creating the Radio buttons, there is only one tag for this in the jsp. I then create the text by us