Resolve File Saving Conflict Dialog Box

Hi, I developed a new GUI for teststand. The problem is with the executable of the GUI, because at the end of the test it does not closed itself. I have to terminate the process by the TaskManager.
When I used the GUI instead of the executable, it appears the dialog box attached. During the test some station globals are overwritten.
I am afreid that is the dialog box that stop the automatic closure of the exe.
Does anyone know how is possible to disable that dialog box?
Thanks a lot.

This does not have anything to do with type conflicts. You likely have two applications that are using the TestStand Engine. One is completing and modifying the StationGlobals.ini file. At the same time, your second application also is modifying the StationGlobals in a different way. If you save the second application, it will overwrite what the first application did. So you are prompted to decide which version you want to keep.
This dialog occurs because there is code that calls Engine.CommitGlobalsToDisk. This method has a parameter called "promptOnSaveConflicts" that gives the option to display this prompt. However, I believe this method is likely called internally by the ApplicationMgr control. I haven't found a way to have the ApplicationMgr call this function with a false parameter value. Before shutting down your application, you could call Engine.CommitGlobalsToDisk with the false parameter and then shut down, which should make the problem go away.
However, you do risk overwriting global data so I would examine what you are doing to see if you expect to have multiple applications modifying the globals. If this is unexpected, you likely have a problem. I didn't quite understand the different between your GUI and EXE or what you are trying to accomplish, so perhaps there is a better way to implement what you want to accomplish.

Similar Messages

Is there a way to select more than one file in a dialog box

I want to select multiple files in the dialog box and get all the file names I selected, is there any way to do this?

Hi
Try checking out the following link
http://forums.ni.com/ni/board/message?board.id=170&message.id=88666
Regards
NeilR

How do I ensure user name is shown rather than 'another user' on the 'File in Use' dialog box?

How can I ensure user names are shown rather than just 'another user' on the 'File in Use' dialog box that appears when attempting to edit a checked out document in Microsoft Word/Excel?
All suggestions welcome.

If I recall correctly, that dialog is generated by the Office client product supporting that file type. There would be no way to modify it.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Two Desktop items appear in file/open close dialog boxes.

In all applications in the file open/save dialog box I have two "Desktop" items on the left toolbar. In Finder it is showing up the right way with only one "Desktop" item on the left tool bar. How do I get rid of this extra "Desktop" item on my open/save dialog boxes?
Thanks.

1. Drag all Desktop icons off your Finder sidebar.
2. In Finder >> Preferences >> Sidebar UNcheck all options.
3. navigate to ~(yourhome)/library/preferences and trash these two files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then log out and back in again. Or restart.
(You will have to reset a few finder prefs the way you like them.)

Bug:Downloading pdf file from the web,file name in dialog box populates with incorrect file name

Hi Gurus
When downloading any pdf file from the web using adobe Reader X the file name dialog box populates with incorrect file name
compared to the saved file name of the document downloaded.
Clarity
1. Download any pdf file from the web
2. Click File, Save as note the populated File Name
3. Compare the populated file name with the saved file name of the documant yuo are downloading.
4. The file Name is incorrect...
Is there any work around on this issue?Can someone please help?..
OS:Windows7
Reader: Adobe Reader X
I've tried a couple of other versions and still get the same results...

Are you downloading the file (right-click, save link as), or just opening it by clicking it?
If the latter, then what happens is the file is loaded to the temporary internet files folder by IE and assigned a temporary name, which is then used when you're trying to save it.
You can test this out by going to File - Document Properties before trying to save and looking at the file's location.

How to edit a file into webutil dialog box?

Hello, I have a webutil dialog box to open a file on a server in Win2003.
I want edit and save the changes in a file into dialog box, but i don't have this function like windows operation system.
Can i customize the webutil dialog box and add this function ?
Regards,
GP
Message was edited by:
ualual99

As I said, the Webutil open/save dialog functions will only allow you to work with the client machine.
You can use the file_transfert_AS_to_client() Webutil function to get the file on the client machine then edit it, then use the file_transfert.client_to_AS() function to upload the new file on the Application Server.
In my article about the Oracle Forms 10g release 2 : Demos, Tips and Techniques,
http://sheikyerbouti.developpez.com/tutoforms10g/tutoforms10g.htm
you could find an "open file dialog" like form sample able to display the Server's directories.(paragraph: 2.4.3)
Have a try !
Francois

How to open a text file without using dialog box

I can open a file using dialog box but I want to open a file without using any dialog box for writing.
With the following commands a new file is created.
File outputFile = new File("outagain.txt");
FileWriter out = new FileWriter(outputFile);
I want to open an existing file and put some more text in it using FileWriter or any other object
rgds,
Arsalan

import java.io.*;
class UReader
    BufferedReader in;
    BufferedReader input;
    String fileName;
    public UReader(String fileName)
        this.fileName = null;
        this.fileName = fileName;
        try
            in = new BufferedReader(new FileReader(fileName));
            input = new BufferedReader(new FileReader("A.b"));
        catch(IOException _ex) { }
    public final String getContent()
        String txt = "";
        try
            while(in.ready())
                txt = txt + in.readLine();
                txt = txt + "\n";
            in.close();
            txt.trim();
        catch(IOException _ex) { }
        return txt;
    public final String getLine(int row)
        try
            input = new BufferedReader(new FileReader(fileName));
        catch(IOException _ex) { }
        String txt = null;
        if(row <= getRows()) {
            try
                for(int i = 0; i < row; i++)
                    txt = input.readLine();
                input.close();
            catch(IOException _ex) { }
        } else {
            txt = "Index out of Bounds";
        return txt;
    public final int getRows()
        try
            input = new BufferedReader(new FileReader(fileName));
        catch(IOException _ex) { }
        String txt = null;
        int rows = 0;
        try
            while(input.ready())
                txt = input.readLine();
                rows++;
            input.close();
        catch(IOException _ex) { }
        return rows;
import java.io.*;
import java.util.*;
class UWriter
    PrintWriter out;
    String fileName;
    String[] txt;
    static int NEW_LINE = 1;
    static int APPEND = 0;
    public UWriter(String s)
        fileName = null;
        txt = null;
        fileName = s;
        try
            out = new PrintWriter(new BufferedWriter(new FileWriter(s, true)));
        catch(IOException ioexception) { }
    public final void addContent(String s, int i)
        int l = 0;
        StringBuffer sb = new StringBuffer(s);
        s.replaceAll("\n\n", "\n###\n");
        StringTokenizer str = new StringTokenizer(s, "\n");
        String token = null;
        while (str.hasMoreTokens()) {
            ++l;
            token = str.nextToken();
        str = new StringTokenizer(s, "\n");
        txt = new String[l];
        int k = 0;
        String test;
        while (str.hasMoreTokens()) {
            test = str.nextToken();
            if (test.equals("###")) test = "";
            txt[k++] = test;
        if(i == 0) {
            try
                for (int j = 0; j < txt.length; ++j) {
                    out.println(txt[j]);
                out.close();
            catch(Exception ioexception) { }
        } else {
            try
                out.println();
                for (int j = 0; j < txt.length; ++j) {
                    out.println(txt[j]);
                out.close();
            catch(Exception ioexception1) { }
    public final void writeContent(String s)
        int l = 0;
        s.replaceAll("\n\n", "###");
        StringTokenizer str = new StringTokenizer(s, "\n");
        String token = null;
        while (str.hasMoreTokens()) {
            ++l;
            token = str.nextToken();
        str = new StringTokenizer(s, "\n");
        txt = new String[l];
        int k = 0;
        String test;
        while (str.hasMoreTokens()) {
            test = str.nextToken();
            if (test.equals("###")) test = "";
            txt[k++] = test;
        try
            PrintWriter bufferedwriter = new PrintWriter(new BufferedWriter(new FileWriter(fileName, false)));
            for (int j = 0; j < txt.length; ++j) {
                bufferedwriter.println(txt[j]);
            bufferedwriter.close();
        catch(IOException ioexception) { }
}Maybe they are not the best codes, i wrote them a long time ago, so dont ask why i did anything wierd. :D
But anyway it works.

File open/download dialog box flashes on the screen, then disappears.

I am upgrading to Firefox 17 (from 3.5.2) on Linux SuSE SLED 10. I am only moving to Firefox 17, as SLED 10 does not support anything higher than that and it is not feasible to upgrade my entire my OS.
My issue is that when clicking on a file on a website, the file dialog box (open with/save) flashes on the screen for a split second then disappears. For items that I have handled by specific applications in mimeTypes.rdf, it does the specified action. However, any file type that I have designated in mimeTypes as "alwaysAsk", I get this issue. I do not have this issue in FF 3.5.2 and I have gone as far as using my 3.5.2 mimeTypes.rdf and prefs.js files on my 17 install and it does not help.
I have looked through many forums and have not been able to determine how to fix this or whether it is fixable in 17.
Any help would be greatly appreciated.

# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page. A list of settings should appear
# Filter the list by typing in the search bar at the top. Type in ''scanWhenDone''. '''You should now find the "browser.download.scanWhenDone" preference'''.
#Double-click on that preference to set the value to ''false''.
#Next, try to download something and see if it still hangs.
Please reply and tell us whether this helped you!
If it doesn't work, reenable the pref that was disabled.

File Open/Save Dialog box

Dear Friends,
I have a unique problem, I developed a form (in Oracle Forms 6.0), utilizing the Forms "GET_FILE_NAME" built-in to activate the FILE Open Dialog box.
It is working fine if I execute the form in WINDOWS-NT environment.
But the same form, when I web deploy it and run it under both NETSCAPE or INTERNET browser
the "GET_FILE_NAME" built-in fails to get activated, i.e no File Open Dialog box appears on the browser.
Any Clues ??
Thanks in advance for your suggestions.
Mohammed R.Qurashi
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by rqurashi ():
Dear Friends,
I have a unique problem, I developed a form (in Oracle Forms 6.0), utilizing the Forms "GET_FILE_NAME" built-in to activate the FILE Open Dialog box.
It is working fine if I execute the form in WINDOWS-NT environment.
But the same form, when I web deploy it and run it under both NETSCAPE or INTERNET browser
the "GET_FILE_NAME" built-in fails to get activated, i.e no File Open Dialog box appears on the browser.
Any Clues ??
Thanks in advance for your suggestions.
Mohammed R.Qurashi <HR></BLOCKQUOTE>
Mohammed,
the file open dialog you used with winnt is based on the windows api, wich does, of course, not work in a java applet.
If you want to use file access from within webforms, you have to extend the forms applet with your own java classes. To do this, you can use the PJC mechanism forms provides (pjc=pluggable java components). Furthermore, if you want to do things like open files on the client (wich are not allowed for java applets) you have to sign your java classes. These things seem to be very complex (and they are), but I've done this work successfully. If you need more information, look at at technet, there are lots of white papers and examples.
null

Fw doesn't recognize certain files in Open dialog box...

Hi,
I have opened a file and changed it in Fireworks. I have applied a filter and saved it twice:
- as a Fw PNG file (surf7_2)
and
- as a JPG file (surf7_1)
When I try to open them using Open command, I cannot see them.... see screenshot below:

First, check where you saved them. They are probably in a different folder.
Second, it's best practice to reserve the save function for native Fireworks documents, which are an enhanced .png format. For flattened bitmaps (including flattened .pngs), use the export function under File > Image Preview or File > Export.

Failed to open a swing JSP file but a dialog box prompt to download jsp

Hi gurus,
I have encountered one strange problem where previously I have installed JRE 1.4.2.0.6 for running my form 10g application.
I 'm currently testing an ADF swing application in a 3 tier model using version 10.1.3 which require JRE 1.5 but when I try to load http://localhost/swing/oc4j.jsp, it will prompt up with the message:
Some files can harm your computer. If the file information below looks suspicious or you do not fully trust the source, do not open or save this file
would you like to open the file or save it to your computer?"
In normal case, it will do a download of the jar file to the client machine and open the swing application using java web start but it seems the problem is related with my previous installation of 1.4 . Even though I have completely uninstalled JRE 1.4 and install JRE 1.5 , I cannot run the ADF swing in 3 tier which is seems to be in relation with the signed jar.
Ana

Ana,
seems that the client doesn't recognize the Mime type for JavaWebstart. Try on a different client. JavaWebStart works for me when I test it on my machine with ADF Swing.
Frank

Custom file open dialog box

Dear Friends!
I need a custom file open/select dialog box (i.e a LabVIEW VI) that I can customize to mimic the looks of my project color scheme etc. Does one exist somewhere? If someone has already made one could you kindly share it with me? I'll be so much grateful to you.The one below is the one that windows provide, I need it in the VI form (so that I can customize it, change its colors etc) and use this in my application.
Message Edited by C .DOT on 03-19-2009 04:58 PM
Attachments:
Snap16.png ‏23 KB

Here is a very simple example that could be a starting point.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
browse folder.vi ‏16 KB

How to open File open/save dialog for a file saved in the Appl. Server?

Hi Experts,
My requirement is that, there will be a link in my BSP page "Link to BI Report" and when the user will click this link, the File open/save Dialog box will appear for a BI Report file that will be in a fixed path in the Application Server. I have checked with <a href="/usr/sap/tmp/bi_report.csv"> tag but it is not working. The BI report file will be currently in the CSV format. Any ideas about how to achieve this? Thanks in advance.

If you want to work in tabbed view, do it like this:
Select the move tool. Go to the tab that contains one of the image files.
Drag the image over the tab that has the blank document (Keep holding down the mouse button). Wait till that tab opens.
Drag & drop the image into the blank document.

How do I turn off graphic effect of Open File dialog box?

There is a graphic effect in OSX 10.4.11 of a slot appearing in the top of the window of programs like Safari 4.1.3 and then an 'Open file..' dialog box emerges from the slot and warps downwards. This is almost guaranteed to crash my Mac!
Please, how can I turn off this effect?
Thanks!
[You don't need to read any further but my problem relates to an archived thread:
https://discussions.apple.com/thread/1313995?start=0&tstart=0
In brief, the thread is about some of the old white Imacs over-heating and causing graphics problems.
I still have a largely useable Imac because I avoid using any graphic effects that cause system crashes: Dock graphic effects, Genie minimise feature, Exposé, and full-screen video feature in Youtube.}

I wonder if Quartz isn't the problem & using the Safe Boot driver...
See this great post by themachead on how to list the extensions in Safe Mode with System Profiler then compare to the extension folder!
http://discussions.apple.com/thread.jspa?messageID=10161377&#10161377
or disable it?
http://hints.macworld.com/article.php?story=20040724190553112
Check if your Mac is using it...
http://www.entropy.ch/software/macosx/#quartzextremecheck

FTP Upload - Replace File Dialog Box

Hi,
Am running LR3 on Vista 64, and using FTP export via the FTP Publisher plugin now available.
In principle everything is working fine, but if I am updating existing files, then for each and every file a LR dialog box pops up asking if I want to replace the file on the server.
There is no option for 'Replace all' so it becomes a rather tedious task of sitting in front of the PC whilst the upload takes place and accepting each file - not much fun with around 400 files.
Does anyone know if there is a way to supress this dialog box? Have tried using Passive, Enhanced Passive and Not Passive n the FTP settings, but makes no difference.
Thanks for any help,
Andy.

If using the LR FTP to overwrite an existing gallery the usual behaviour should be for LR to ask once if you intend to overwrite the whole gallery, not for each separate file. Perhaps you should try resetting the warning dialogs in the preferences menu and see if this returns the warning to its usual function.

Resolve File Saving Conflict Dialog Box

Similar Messages

Maybe you are looking for