[RESOLVED] Double text label on focused button in the Eclipse

Hi!
After update in addition to this I get one more thing: in the Eclipse (both in a CDT and in a PDT) labels on a focused button gets doubling now.
It looks like this:
There is no such an artefacts in other java (and non-java) apps which I have.
Any ideas?
Offtopic: may someone for whom English is native language to comment my grammar? :-)
Last edited by beaux_monde (2014-02-07 13:55:19)

It looks like I resolved this issue by myself.
I use qtcurve. And if I uncheck "Embolden text" in a "Default Button" in a qtcurve settings label doubling goes away... But this was detected in the Eclipse only.

Similar Messages

How to change dynamically text label at run time in the forms

Hi,
I am having a form in which i want to change the text label dynamically. I mean when a certain condition match then text label should be change and when condition does not match then the text label should reamin as it is in the same form.
plz help
thanks in advance
azhar

Hi,
Use this code to change the label at run time.
set_item_property('deptno',prompt_text,'pagal dept');
Prompt_text is used for changing label at run time.

First focused button nudges the stage upwards?

Hi,
I'm testing a Flash Lite (3+) application in full screen on a Nokia E71.
I have a list of various sized movieclips on a page (scrollable page, I've built my own UI).
These movieclips are acting as buttons (triggered by "onPress" functions).
I have a scrollbar anchored to the right side of the page, showing how much content sits below the fold. This scrollbar's track height is set to the stage's height, so it'll always fit snug from top to bottom on the right side of the page.
If the first button hangs over, or sits below the fold, Flash Lite nudges my whole content up to show that button clearly when it's focused for the first time.
But no "_y" postion data seems to have changed for me to programatically nudge it back again.
It's like the _root of the Flash Lite movie has had it's _y position nudged upwards by the difference between the fullscreen screen height and the regular (with soft key and title bar) screen height.
Any ideas what's going on, and how I can override it?
Cheers,
- James.

Hi,
The problem has been solved by "fp_david" on the Forum Nokia discussion boards:
http://discussion.forum.nokia.com/forum/showthread.php?p=680306
The simplest is to change the stage size so it is smaller than the screen of the phone you’re running it on. In cs3/4 got to the Stage’s properties menu and change the Stage’s default width and height to 50. This is the easiest fix.
Set the stage size to, say, 10x10, and the nudging ceases.
Cheers,
- James.

Creating a button with a text label layer

Hi guys. Looking for any tips on how best to implement a button with a text label. I initially created a rectangle object on a lower layer and with text in the upper layer via type tool. When I group both objects and create the button the text is readable in my InDesign (document) computer screen but the minute I preview it on my iPad the button becomes unreadable and pixellated. I tried various approaches by moving the text layer outside the button group does not display the text at all. Has anyone run into this issue? If so what is the best practice? Thanks in advance.

Thanks for the insight Neil. Regarding my button design its nothing fancy. Its a rectangle box on one layer and a text label on another layer inside the rectangle object. What I'm trying to simulate is when the user taps on the button the click state will change colour to notify the user that they have activated an event and in this case a navto://...
The way I've implemented it is the rectangle is coloured pink [Normal] and when tapped the light pink [Click] toggles between both colours BUT my text label disappears.
See the screen shots below.

Text labels on buttons have disappeared, and the tabs have moved ABOVE the address bar. Why?

Last night I updated to Firefox 29.0.1. Now, I don't mind change - and I don't mind redesigns - but I HATE it when options are removed. I want text labels on my buttons (the "Home" button for example"). In the previous version of Firefox you could right-click in the grey space at the top, and select "customise". From there, you could drag and drop which things you wanted to appear in your toolbar or not - and there was a tickbox to selext if you wanted text labels to appear underneath them or not. Now as hard as I look, I can't find this option. It looks like you're now forcing people to ONLY use icons. I hate that. My brain processes the word "Home" a lot faster than it recognises a little picture of a house. You need to understand that people work in different ways - and just because the Firefox developers might not personally use the text labels, that doesn't mean that no-one does!
What is the point in taking away the option? None at all. Please re-introduce the option. In the meantime, I will revert to the previous version of Firefox.
Additionally, I see that the tabs have now moved on top of the address bar. Again - WHY? I like them below. Why do you feel the need to make design changes - and then not give people the option to customise things how they like?

Yes you can install the Classic Theme Restorer extension without a problem.
See also the current support web page of the CTR extension.
*http://forums.mozillazine.org/viewtopic.php?f=48&t=2827985

I just installed Firefox 29.01 and the text labels on my toolbar have disappeared and there doesnt seem to be a way to put them back. How do I do this?

MY QUESTION IS EXACTLY THE SAME AS THE USER BELOW ASKED (WHICH I HAVE PASTED BELOW), AND HE GOT A STANDARD (AND USELESS) RHETORICAL ANSWER FROM THE SUPPORT STAFF. PLEASE LOOK AT THE SPECIFIC QUESTION ASKED AND DO NOT ANSWER WITH A GENERIC ANSWER LIKE "THIS IS HOW TO ACCESS THE CUSTOMIZATION SCREEN" BECAUSE I FOUND THE CUSTOMIZATION SCREEN WITHOUT HAVING TO ASK AND THAT SCREEN DOES NOT SHOW HOW TO TURN ON THE FEATURE I NEED! DO YOU WONDER WHY I USE ALL CAPS? IF YOU READ THE ACTUAL QUESTION WHEN IT WAS WRITTEN IN LOWER CASE, I WOULDN'T NEED TO USE ALL CAPS!
Last night I updated to Firefox 29.0.1. Now, I don't mind change - and I don't mind redesigns - but I HATE it when options are removed. I want text labels on my buttons (the "Home" button for example"). In the previous version of Firefox you could right-click in the grey space at the top, and select "customise". From there, you could drag and drop which things you wanted to appear in your toolbar or not - and there was a tickbox to selext if you wanted text labels to appear underneath them or not. Now as hard as I look, I can't find this option. It looks like you're now forcing people to ONLY use icons. I hate that. My brain processes the word "Home" a lot faster than it recognises a little picture of a house. You need to understand that people work in different ways - and just because the Firefox developers might not personally use the text labels, that doesn't mean that no-one does!

I agree with whereitis above, I hate it when options are removed (ex: the Bookmarks side panel (Ctrl-B) button missing) etc.. Firefox's major BOLD one-liner is: CUSTIMAZATION. Now to regain this CUSTIMAZATION freedom, Firefox suggest to solve this by installing the ADDON "Classic Theme Restorer". I don't want to install any ADDON to customize Firefox! I went with Firefox because it was CUSTOMIZABLE, and that is the only reason why I went with this web browser! Now, Firefox is asking me to add an ADDON to CUSTOMIZE it. What is this?!

Default UITableViewCell text label background color

I need a table view cell that just has simple text but with custom backgroundView images when not selected vs. selected. I'm too lazy to implement a custom cell, so I was using the regulation UITableViewCell, setting the backgroundView and backgroundSelectedView. The problem is for non-white backgroundView, when the cell is not selected, the text has a white box around it (the background color of the label containing the text, I assume), which looks horrible. When the cell is selected, the default UITableViewCell implementation takes care of changing the text color to white and text label background to clearColor and the custom backgroundSelectedView shows through beautifully. Is there a reason why the text label shouldn't just have a clear background color ALL THE TIME?? If the UITableViewCell is not customized for backgroundView, i.e., the cell background is white, the clear colored text label is no different from a white colored text label. If the backgroundViews are customized to non-white, a clear text label won't be in the way of the backgroundView showing through.
Does this sound like a good feature request?
How does one submit requests or bug reports for iPhone SDK anyways??
Thanks.

fitzyjoe wrote:
I am having this exact same problem right now. Did you have to subclass UITableViewCell to fix it?
I had the same problem and subclassed UITableViewCell to solve it. I set the backgroundView and selectedBackgroundView to UIView instances I wanted to use and then implemented setSelected:animated: in my subclass.
{code:}
-(void)setSelected:(BOOL)selected animated: (BOOL)animated {
[super setSelected: selected animated: animated];
for (UIView *view in self.contentView.subviews) {
view.backgroundColor = [UIColor clearColor];
{code}
Bit bruteforce and as Apple suggests this will impact table performance, but the tables I work with aren't that big and it works well so far.
It'd be nice if UITableViewCell honored backgroundView like it does selectedBackgroundView, i.e. when the backgroundView property is set keep the cell contents transparent.

Why can't I get the text labels for each app to go away? I only see 9 app buttons now; used to see 30 or 40

Text labels started showing up next to my app buttons going across toolbar. Because the names are fairly long (I don't need them per se); I can now only see about 10 buttons. I made sure the the box in the toolbar preferences menu which says "show text labels for each app." was unchecked. I even tried checking it, then unchecking it.
I can't get the labels to go away. I used to be able to see and therefore USE EASILY about 30 -40 app buttons. I just downloaded the latest update to firefox 8.

I am having something similar going on and can't sort out what it is doing:
ldiffs:
dn: automountMapName=auto_master,dc=example,dc=edu
objectClass: top
objectClass: automountMap
automountMapName: auto_master
dn: automountKey=/foo,automountMapName=auto_master,ou=Mounts,dc=soe,dc=ucsc,
dc=edu
objectClass: automount
automountKey: /foo
automountInformation: auto.foo,dc=example,dc=edu -rw,resvport,
hard,intr,nosuid,tcp
Second one:
dn: automountMapName=auto.foo,dc=example,dc=edu
objectClass: top
objectClass: automountMap
automountMapName: auto.foo
dn: automountKey=tstaff,automountMapName=auto.foo,dc=example,dc=edu
objectClass: top
objectClass: automount
automountInformation: fileserver:/export/foo/tstaff
automountKey: tstaff
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 name=tstaff[] map=auto.foo,dc=example,dc=edu opts=rw,resvport,hard,intr,nosuid,tcp path=/foo direct=0
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 getmapent_ds called
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 getmapent_ds: key=[ tstaff ]
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 ds_match called
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 ds_match: key =[ tstaff ]
9/25/09 11:45:25 AM com.apple.automountd[1101] t0xb0289000 ds_match: Searching for tstaff,automountMapName=auto.foo,dc=example,dc=edu
9/25/09 11:45:25 AM automountd[1101] ds_search failed
exiting ...
It seems like it can't find the trigger point tstaff. It is looking for:
ds_match: Searching for tstaff,automountMapName=auto.foo,dc=example,dc=edu
which isn't what the DN is in ldap:
Distinguished Name: automountKey=tstaff,automountMapName=auto.foo,dc=example,dc=edu
any thoughts?
regards,
Derek

Problem editing labels of radio button symbols in Fireworks CS6

Hi,
I'm new to Fireworks, and I am struggling with symbols. I have encountered several problems creating reusable symbols and especially editing the labels.
Problem 1
I can't edit the label of a symbol that I create using a default Common Library symbol as a starting point. Here's how to reproduce:
- Open a default symbol, say RadioButton(win) for editing
- Do changes (font for example)
- Save as a new symbol in the Common Library folder
- Use the new symbol in a new document
- Editing the label in symbol instance properties does not work
Continuing with a rather irrelevant use case just trying to understand what is going on:
- Add a default symbol RadioButton(win) from the Common Library to the same document
- Now try editing the label of the new symbol (added to the document above)
- The label (and other properties) of the default symbol are edited instead
Problem 2
Why can I not enter a number as a label of the RadioButton(win) symbol, found in the Common Library? The workaround is simple though, I can just enter a number followed by a space.
Problem 3
How to create a set of a heading and three radio buttons as a symbol? If I simply convert three RadioButton(win) symbols and a text element to a new symbol, I lose the possibility to edit the labels of the radion buttons. The properties show that the radio buttons have labels from the time before converting to a new symbol, but in the new symbol the radio button elements have labels that say "label", and I cannot edit them.
What is the best way to create radio buttons, check boxes, combo boxes and other symbols with custom look and feel, while retaining all the functionality of the symbols?
Thank you,
Teemu
Fireworks CS6 12.0.1.273

misterMistake wrote:
> Fireworks v. 9.0.0.1188
>
> I have created a 4 state button & saved it to my
button library. Now I need
> to modify the graphic but cannot select it. When I first
click on the "down"
> state, the graphic is selected along with the "active
area." If I grab the
> button I can move it but then it immediately snaps back
to it's original
> position. I then cannot select the button again until I
click to another state
> and then back again to "down." This problem is not just
with the "down" state
> but all states. The documentation makes clear that I can
just double click on
> the button, either on the workspace or in the library,
make my edits and then
> click "done" in the button editor window. Clearly I've
either done something
> incorrect to lock the graphic or my understanding of the
process is incorrect.
> Any help appreciated.
Can you upload a copy of the PNG file to your website for us
to have a
look at?
Linda Rathgeber
http://www.adobe.com/communities/experts/members/8.html

IPhone not receiving calls, and receiving double texts

I have read through these forums, and searched this on google and haven't found a solution to this problem, or anybody with a similar issue.
Over the last two to three weeks, I have had many people telling me they'll call, and it won't go to voicemail, but instead it'll state that # is not reciving calls at the moment, my phone will be turned on and will never ring. Also along with that I'll have an issue where I am receiving double text messages from time to time, it'll happen at least 5 times a day.
I would take my phone to Apple, but as it'll be hard to produce these results at the genius bar I'm not sure they'll be able to do much, and my iP4 is out of warranty.
So far I've tried these things:
System Restore
Reset All Settings
Reset Network Settings
None of these work, the Restore will work for a day or two, but the issue will come back everytime.
Thanks for any help you all may be able to provide.

Well another issue I've been having with the phone, which I forgot to mention that leads me to think it's a phone issue, is it'll keep locking up in apps, and the home button will become non-responsive. I'll have to use the standby button to put the phone to sleep, then wake it up and then the home button will start working again.
The issues may be seperate, but it seemed to all start happening at the same time.

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

The text "Remove" is not appearing in the remove button of Bookmarks.

Hi,
The text "Remove" is not appearing in the remove button of Bookmarks. My problem is the same as mentioned in this question.
https://support.mozilla.org/en-US/questions/1017302
The solutions suggested on the link don't seem to work. How do I resolve this? For me this problem is persisting everyday.
Thanks

You already tested in Firefox's Safe Mode and that did not make any difference?
Can you associate this problem with any software changes, such as upgrading from Firefox 31 to Firefox 32, or updating an add-on, or Windows, etc.?
Have you noticed problems with any other dialogs or menus?
Occasionally a corrupted settings file may cause issues with dialogs. This file also stores toolbar customizations. You can rename the file and customize from scratch.
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
Start Firefox back up again. Any improvement in the Edit Bookmarks dialog?

How can I use Text-Elements in Dynpro Buttons ?

Hello Experts,
I have create a dynpro screen with the screen-painter.
In this screen have a button, in which label i want to use defined textelements.
This has the advantage that i can expand it to other languages.
The screen is an standard screen.
In the Button i have to try using &&Text-001&& , but it doesn't show me the contain of Text-001 .
It show me &&Text-001&& as label in the button.
How can I do ?
Which possibilties are existing ?
Thanx in advnace for your responses
Best Regards

In button attributes select output field . Then in program define a vairable for the button with the same name and assign the text element to it before screen is displayed.
data: button(10) type c. "your button name
button = text-001.
call screen 100.
Regards
Marcin

Label of a button disappears when its enabled

We have a button in our forms which remains disabled by default.
So, by default it works fine and we are able to see the label of this button correctly.
On based of certain conditions this button gets enabled using the below line of code
set_item_property('Block',enabled,property_true);
However, when this statement gets executed label of the button disappears.
It appears to be a blank button without any label text.
Iconic property of the button is already set as NO
Please help!!!

Probably a bug with your specific version, you did not give anyway. You should consider upgrading/patching to a more recent version.
Francois

[RESOLVED] Double text label on focused button in the Eclipse

Similar Messages

Maybe you are looking for