Resource History Page Modification Possible?

Hi,
In Resource History page, the processes are listed that have run before. To get the detailed information we should click to the record on list and go to the Detail Page of this record. However, I want to show the date info, that is the working time of the process, on the Resorce History page; not on the Detail Page of the process.
Is there any way?
PS: Working on R2
Regards,
Fatih

>
Olivier D. wrote:
> Dear experts,
>
> I would like to check the history of the modifications of a PO. In ME23NI click on "Environment" then on "Item Changes" (after having selected a line).
>
> First question: in the column "Tcode", there is "ME23N". I don't understand because the transaction ME23N is only to display a PO and not to do do any modifications. So why is it displayed in the history of item changes?
>
> Second question: is it possible to see the changes that are mentionned in this screen?
>
> Thanks a lot
>
> Olivier
Me21n is create, me22n is change and me23n is display, any activity taking place in either tcodes can be seen in all three transactions. So through display or change you can also see the changes made to PO through environment>header changes or item changes.

Similar Messages

Format of Date Field in RAR background job history page

Hi Everyone,
Is it possible to customize the format of the fileds: "last run", "next start" in RAR background job history page?
By default it is in the format yyyy-mm-dd.
I am just wondering my customer's requirement is possible or not?

Hi,
There is no option to set the date format in the Configuration settings. Check the FM /VIRSA/ZCC_GET_STATREC_DATA which has the CALL FUNCTION 'GET_SYSTEM_TIMEZONE'. RAR will read the time from the system.
You may look at formatting the the date format here.
Hope this helps!!
Warm Regards,
Raghu

UnAuthorised error while checking Resource History of provisioned account

Hi Experts,
I have provisioned an ACF2 account in OIM 11gR2, I wanted to check the resource history of the provisioned account. When i clicked on the resource history button,, i get error page saying:
Just for information, i tired doing the same from SSL also
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.2 401 Unauthorized*
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
Has anybody faced this issue? Please help!!

Hi,
I am working on OIM 11g R2 setup and facing the same issue.
But the resolutions provided above is not working for me.
I am using Safari v5 browser.
Requesting help as I am stuck here.
Thanks,
Prasanna

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible?

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible? In a nutshell I want to point the link to an image in a directory that uses just part of the address.

I know this is something you can do in Maya with linked files. I guess InDesign just isn't there yet.
MW Design - Yeah I think "Relative paths" is the right term! I want to create a Layout with an image in the center of the page - and then duplicate my folder structure with that file. With that, I want to replace the Linked image file with a diferent image file of the same name. In effect having multiple files of the same layout with different images. I hope that made sense.

Can I open a history page without having it update? I accident. deleted ebay items & want to open the pg from history in it's previous state when the items show

I think History pages when opened retrieve the new information for the particular page & open it in its updated state. I would like to open the history page in its old state, before I did the accidental deletions... I thought this was possible but couldn't find any instructions.... -- thanks in advance for anyone's help!

You best bet is to put FF in offline mode, and try to load the page from the cache. Note, there is no guarantee that this will work.

Order history page

So my orders are showing on my order history page now. Dare I hope for tracking numbers soon?

Hi Manish-Sharma,
Thank you for your reply. It is very much appreciated.
I tried answering in the forum on the message page, but as previously, the forum entry level for some reason rejected my screen name, which is "stehkoyeh", saying it was already taken and yes, I am properly logged in. I guess it's not my night.
Regarding attaching the jpeg image, I looked for a reply field, but I guess not having my screen name accepted prevented me accessing it. I thought therefore it could go on the email, but I was unaware it couldn't be done.
I can 'see' now my email reply posted, but I honestly didn't realize that only text gets through, not images.
I am really grateful for now being able to download PSE10, which is downloaded and safely installed and working fine. I thank you personally for making this possible.
Anyway, thanks also for staying with me, it being so late on a Sunday here on Vancouver Island, BC, Canada.
Your Help service, although difficult for me personally, has been wonderful, because it did what it was supposed to, in spite of my errors!
Regards,
Gareth

Approval center history page contains timesheets with "Submitted" status

Hi guys,
In a Project Server 2013 onprem configuration I find a group of timesheet managers facing this situation:
Their approval center shows timesheets from a week or two, at most tree weeks back. But when they look at their history page for timesheets they will see rejected, approved but also submitted timesheets.
How did those timesheets pass the approval center page without being noticed? is there a timer job that moves timesheets to the history page? I could not find any information on other TechNet questions, so I thought to post my own.
The question boils down to:
How did the timesheets get into the history page without being seen in the approvals page first, and how is that even possible if they aren't rejected or approved yet?
Kind regards,
Erik

Hi Erik,
Are those timesheets specific in any way? Period, team member, elapsed time since the submittion? Do you have the SEM activated?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What determines when the My Timesheet item will display in the Resource Availability Page?

Can someone point me to where I can get more information on the My Timesheet item that displays in the Details section of the Resource Availability page? I cannot figure out where this information is coming from or what determines how many My Timesheet
lines you see.
In one Project Server environment, I noticed that each user had 3-4 My Timesheet line items in the Resource Availability page. The period I was looking at spanned 8 weeks and all of those weeks were in the future. I checked the Manage Timesheets
page for one of the users that had 4 My Timesheet items in the Resource Availability page. The user did not have any timesheets created for the 8-week period I was reporting on in the Resource Availability page. To make matters more confusing,
some resources only had 3 My Timesheet line items in the Resource Availability page for the same period. So it seems like something other than active timesheets for the period is dictating how many My Timesheet lines display. Also curious was the
fact that ALL of the My Timesheet items for all users in the Resource Availability page (7 or 8 people) showed "0h" for all of the periods displayed.
I decided to look into this further in a separate Project Server environment, because I didn't have access to the first one at the time. Both environments were configured to not use single entry mode and used resource plans to calculate allocation.
In this second environment, I entered hours against an administrative task classified as non-working time for one week and submitted / approved this sheet. I entered hours against a project task for a second week and submitted / approved this sheet.
I then used the Resource Availability page and "reported" on a period including those periods (20-week period total). I didn't see a single My Timesheet item. Not even any showing the "0h" designation I had seen in the first environment.
So long story short, I cannot figure out the criteria that dictates when a My Timesheet item displays. And I also can't figure out the purpose. If the Resource Availability page is designed to show planned work (either through the planned allocations
stored in resource plans or planned assignments through project schedules), what is the point of the My Timesheet values? Wouldn't planned work be captured in the project line items? If it's for administrative, non-working time only, why would
the My Timesheet items not show up in the second environment scenario? Any help / insight would be appreciated.

Hi,
After investing a lot of time i found one link which is talking about My Timesheet in resource availability page.
I believe link providing proper explanation though i would like to test it on my system.
http://social.technet.microsoft.com/Forums/en-US/projectserver2010general/thread/83e46a4d-3c05-4dda-8566-669b12b673f4
kirtesh

Getting 401 Unauthorized error when accessing Resource History in OIM11gR2

Hi,
I am receiving the following error (In the Resource Histroy Popup window) when I tried to access the Resource History for completing a User provisioning (DB Resource using Oracle DB connector).
I have setup OIM 11g R2 on Windows 2008 Server Enterprise R2 with Oracle DB 11g R2
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
I have read in other forum links that we need to configure the Authorization policies from OES APM console.
I have setup the APM console, but I am not sure how to configure this related to my scenario
I couldn't figure out what policies to be configured for my requirement under Application---->OIM----->oimdomain----->Authorization policies in APM console.
I request experts to help on this as I am completely stuck here.
Thanks,
Madhu

Hi user9212679,
I am able to resolve the issue by reconfiguring the Domain properly with my FQDN of my VM.
Earlier I was using my IP Address instead of FQDN and but the OIM is taking the FQDN of the machine and throwing 401 Unauthorized error.
But I appreciate you help as it gave me clue of what could be wrong.
Thanks,
Madhu

Good day. Is there into Pages the possibility to compare two documents? In order to reveal changes.

Good day. Is there into Pages the possibility to compare two documents? In order to reveal changes.

Hi iMayner,
I don't know of a way to easily compare two documents in Pages. Maybe there is an app to do this, but I don't know of one.
What you can do in Pages is to open both documents, resize the windows and drag them side-by-side on the screen. Pages 5 has a limit on how narrow you can make the windows, so this may be a bit of a pain.
The first step would be to show the Word Count in both documents. (Pages 5.5.1 Menu > View > Show Word Count, or click on the View button in the ToolBar and Show Word Count). If the Word Counts are the same, you have **some** confidence that the documents are identical, but no guarantee.
An example of two short documents with different word counts:
Document A (33 words)
The quick brown fox jumps over the lazy dog.
Don't count your chickens until they hatch.
Don't cross your bridges until you come to them.
An apple a day keeps the doctor away.
Document B (34 words)
The quick brown fox jumps over the lazy dog.
Don't count your chickens until they have hatched.
Don't cross your bridges until you come to them.
An apple a day keeps the doctor away.
To home in on that difference, copy and paste each document into a column in a spreadsheet such as Numbers or Excel, so that each paragraph becomes a cell in a column. Turn on Wrap text in cell.
The different heights of each cell (paragraph) become apparent.
Happy Christmas!
Regards,
Ian.

Customizing 'Resource History' window

Hi,
I have created a Role named 'Infosec' and want that users who are part of this role have access to perform action on Resource History tab (add tasks in 'Resource History' window of users).
I think to achieve this i have to add the users who are part of 'Infosec' Role to some Admin role under Top Organization .
I added my user to 'User Administrator' Role and 'Application Instance Administrator' but its not solving my problem.Getting below error :
"noPermissionToAddTask The logged in user does not have permissions to perform this operation"
Can anybody tell me which is the appropriate Role for this or suggest me if i am thinking on right lines ?
Thanks,
Puneet

Hi Puneet,
There is another workaround available:
To see the account ID (instead of the orc_key instead), one needs to do the following:
1. Login to the design console.
2. Navigate to the process definition form and search for the process definition of the required process.
3. Click on the "Map Descriptive Field" button.
4. Map whichever field is the account ID from the process form as the descriptive field.
Once this is done, for NEW accounts, administrator should be able to see the account ID field from the process form on the actual provisioned resource.
let us know result ... Thnx

Vibe Resource Library Page: Add-on tools for Vibe

Novell has a nice new section on their Novell Vibe Resource Library Page where Novell partners can publish their add-on tools and products for Vibe: https://www.novell.com/products/vibe.../partners.html
You should have a look. There is some interesting new stuff for those of you who are using Vibe inside their organisation or company.
Best Regards
Erik

e-ebell,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Any good online resources for pages templates?

I typically use Google docs for basic word processing. Needed some more robust features from time to time, but I hate having to run Word in VM Ware and not a fan of Word anyway. Really loving Pages so far. Any good online resources for pages templates?
Trent
< Edited By Host >

There are several options for templates you can use in Pages. First, there those submitted by other users & available at iWork Community.
You'll find some links in the Resources section here.
I haven't tried these Microsoft sites for awhile, so I'm not sure if these steps are still valid, but it does give you a starting place.
Try Microsoft Office templates. to find links to many PC templates. Then comes the Microsoft trickery part. Choose the category then sub-category & then click the name of a template. Next is a page with a "download" button that takes you to the "Your operating system doesn't meet system requirements" page. All that means is that you can't use their automatic download service. Click the "download now" button in the section to manually download. Somewhere along the process was a license agreement. The file I chose downloaded as 06369101.cab. Double-clicking it launched Stuffit & resulted in a folder. I then had to change the .dot file in the folder to have the .doc extension. It then opened in Pages with only one unsupported warning.
The Mactopia site has a lot less templates to choose from, but was less involved to download. Most templates for Word will open nicely in Pages. I haven't come across one that doesn't, but that doesn't mean someone else might. The only thing to watch for is the file extension. Some Word templates have an extension other than .doc. You will still be able to use them, just change the extension to .doc in the Finder or Pages won't recognized them as Word files. Of course, you can't change just any file's extension to .doc & have Pages open it. It must be a Word document.

Anyway to automatically consolidate icons on as few of pages are possible?

When I did the initial sync to my iPad, iTunes added all of my apps that I have on my iPhone and spread them over quite a few pages. Is there anyway to automatically to move all the app icons down to as few pages as possible (i.e. not moving them one by one)?

If you are looking for something automated, I don't think so.

Resource History Page Modification Possible?

Similar Messages

Maybe you are looking for