What determines when the My Timesheet item will display in the Resource Availability Page?

Can someone point me to where I can get more information on the My Timesheet item that displays in the Details section of the Resource Availability page? I cannot figure out where this information is coming from or what determines how many My Timesheet
lines you see.
In one Project Server environment, I noticed that each user had 3-4 My Timesheet line items in the Resource Availability page. The period I was looking at spanned 8 weeks and all of those weeks were in the future. I checked the Manage Timesheets
page for one of the users that had 4 My Timesheet items in the Resource Availability page. The user did not have any timesheets created for the 8-week period I was reporting on in the Resource Availability page. To make matters more confusing,
some resources only had 3 My Timesheet line items in the Resource Availability page for the same period. So it seems like something other than active timesheets for the period is dictating how many My Timesheet lines display. Also curious was the
fact that ALL of the My Timesheet items for all users in the Resource Availability page (7 or 8 people) showed "0h" for all of the periods displayed.
I decided to look into this further in a separate Project Server environment, because I didn't have access to the first one at the time. Both environments were configured to not use single entry mode and used resource plans to calculate allocation.
In this second environment, I entered hours against an administrative task classified as non-working time for one week and submitted / approved this sheet. I entered hours against a project task for a second week and submitted / approved this sheet.
I then used the Resource Availability page and "reported" on a period including those periods (20-week period total). I didn't see a single My Timesheet item. Not even any showing the "0h" designation I had seen in the first environment.
So long story short, I cannot figure out the criteria that dictates when a My Timesheet item displays. And I also can't figure out the purpose. If the Resource Availability page is designed to show planned work (either through the planned allocations
stored in resource plans or planned assignments through project schedules), what is the point of the My Timesheet values? Wouldn't planned work be captured in the project line items? If it's for administrative, non-working time only, why would
the My Timesheet items not show up in the second environment scenario? Any help / insight would be appreciated.

Hi,
After investing a lot of time i found one link which is talking about My Timesheet in resource availability page.
I believe link providing proper explanation though i would like to test it on my system.
http://social.technet.microsoft.com/Forums/en-US/projectserver2010general/thread/83e46a4d-3c05-4dda-8566-669b12b673f4
kirtesh

Similar Messages

How to change the text of item's displaying in the folowing ALV.

Hi Experts,
I want to change the text of item's displaying in the folowing ALV.
Go to ME23N->Click 'Messages'->Click 'Further Data' -> Click 'Displ.Originals'.
Here one small ALV grid is appearing.
Currently it is showing same name's under the 'Title' column of that ALV. My requirement is to change the text coming under the column 'Title' in that display.
Can any one throw some light in the issue.
Thanks&Regards,
Anversha

Hi Anversha ,
i think you need to use Enhancement point for it.
check the program DV70AF0A-->ARCHIV_ANZEIGE(Subtoutine).
i had similar kind of requirement ,while attaching the supporting documents to FI document , i need to update title field with File name , so i used EP and BADI to do so.
regards
Prabhu

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got extra money to spend..

Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes?

I am having problems syncing recently recorded songs to my iPod. I am using an ion program to record vinyl records to iTunes. The songs are in the iTune library and will play on the computer. When I try to sync they show up but do not play. help

I am using an ion piece of equipment to record vinyl reccords to my iMac and in turn save them in iTunes. I have recorded many records this way and have never had a problem until yesterday. I recorded three songs from records to iTunes and was successful as they are on the song list and will play on the iMac. When I tried to sync them to my iPod they showed up on the menu but would not play. The iPod just skipped over the new guys. Am I doing something wrong or has my ion program flipped out? Any help would be appreciated by this old man. Thankyou

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

I have MacBook Pro with Mtn Lion. When cover is down, FaceTime will not ring the Mac from iPad. Can I set up to ring Mac

I have MacBook Pro with Mtn Lion. When cover is down, FaceTime will not ring the Mac from iPad. Can I set up to ring Mac

Well first, I must say "Yikes!!!"   I didn't know anyone still used Word Perfect.   That's an old school word processor right there... haha.
Okay, in all seriousnous, when saving your files in Word Perfect, use the Save As feature, and select a different format.   Word Perfect's format is likely not going to be opened by any of the popular word processing software.   I would try saving the document as RTF (rich text format), which is a universal standard across word processors.   This way, you can open the document on your Mac, or any other machine.
Now, I'm also assuming that you have a word processor installed on your Mac.   Right?   Maybe Word? Maybe Pages?   If you don't have a word processor, you'll need to get one.   If you don't want to spend the $10 on Pages, consider downloading Open Office (http://www.openoffice.org/download/).   This will give you a free word processor that you can use on your Mac.

My iphone has a problen on the phone icon. When I press the phone icon, it will auto dial the last number, how can I fix this?

my iphone has a problen on the phone icon. When I press the phone icon, it will auto dial the last number, how can I fix this?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

It is unclear the advantage to pre-ordering the new iPhone 5. What I have read is that it will ship on the 21st? If so the only way to get one on the 21st is go stand in line. Please correct me if I am wrong.

It is unclear the advantage to pre-ordering the new iPhone 5. What I have read is that it will ship on the 21st if you pre-order? If so the only way to get one on the 21st is go stand in line. Please correct me if I am wrong.

if you don't have time to stand in line or don't want to risk getting there too late and leaving empty handed from the apple store preordering will guarantee you one but possibly in a slightly longer timeframe

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?

Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?

It does, under certain circumstances. If you are playing music and lock the phone or it locks on its own, when you wake it up, the album art will show. It also shows as the background if you are in the music app. If this is not exactly what you are looking for, you can submit feedback to Apple about this feature at www.apple.com/feedback.

How On mouse click on the table [0][m] the pop up window will display

hi ,
I need your help I am working on a application in which in a table when i click on the first column cell i.e. column must be first and the row may be any then the pop up window will display in swing .For exp if I click on the second row and the first column then information about that perticular row will display in the pop up window . That popup window have the all the information about that perticular row and some extra field informatimn also . should I create the another model for that or I can use existing datamodel of the existing table.We are not using any database at this time . how I can do that please help me . It is urgent.
Thanks in advance
anum

Add a MouseListener to the table. Use the rowAtPoint(...) and columnAtPoint(...) to determine which cell was clicked. This display a JDialog with the required information.

Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

Jon....
Don't confuse the threads here with 'typical' experience. Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
If you are having repeated crashes it is really pretty basic. You either have a physical problem with your pad, or you are using too much memory.
The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now. That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.
This happens, more often than not, when using safari with multiple windows open on graphic intense sites. It can also happen with a memory intensive game, and residual apps in the background.
Double tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

I have a new laptop and want to keepon using Adobe Pro X. I have downloaded the programe but adobe will not accept the serial number although I am a registered user .

I have a new laptop and want to keepon using Adobe Pro X. I have downloaded the programe but adobe will not accept the serial number although I am a registered user .

Hi tapanb34358563,
Could you please let me know what error prompts on your screen when you are trying to enter the serial number.
Have you bought subscription for Acrobat, if yes then you might need to sign in at "adobe.com" using your Adobe ID credentials to activate subscription.
Let me know.
Regards,
Anubha

Do you think the intel based macs will start with the iMac?

do you think the intel based macs will start with the iMac? or the mini? or a tower?
when are they suppoed to be ready theoretically anyways?
just curious...
chaz

Hi iSMH;
According to what Steve said in his keynote address on the Migration to Intel, so I think this is not speculation, they will start with the Mac Mini and iBook with the release being sometime during the summer of 2006. The rest of the line will foloow later with the Powermac being released sometime during the second half of 2007
Allan

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the with the little arrow, not all the highlighted ones!

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

How do I get toolbar bookmark items to display in the bookmarks toolbar instead of in the Bookmarks menu | Bookmarks toobar submenu?

When I add bookmarks to the bookmarks toolbar, they don't appear on the bookmarks toolbar (duh...) but appear instead in the Bookmarks Toolbar submenu inside of the Bookmarks menu.
How do I get them to appear on the bookmarks toolbar itself?

You can check that the "Bookmarks Toolbar items" is still on the Bookmarks Toolbar.
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
*"View > Toolbars"
Open the Customize window to set which toolbar items to display:
*View > Toolbars > Customize
*Firefox menu button > Options > Toolbar Layout
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up

What determines when the My Timesheet item will display in the Resource Availability Page?

Similar Messages

Maybe you are looking for